* Removed size validation for MOs
* rasctl -D detaches all devices
* Detach all devices on Ctrl-C (KILL signal)
* Added comment
* Also detach all devices on SIGTERM
* Updated logging
* Updated logging
* Updated logging
* Updated ID/LUN parsing
* Updated handling of max_id
* The -HD option sets type to SAHD
* Replaced is_sasi by device type
* Updated logging
* Logging update
* Improved LUN evaluation
* Check LUN against UnitMax
* Comment update
* LUN parsing update
* Logging update
* Logging update
* Updated ReportLuns
* Updated REPORT LUNS
* Cleanup
* Updated REPORT LUNS
* Updated Execute()
* Updated LUN handling
* Check for consecutive LUNs
* Added LUN check for remotely attached devices
* Remember LUN selected by IDENTIFY
* Evaluate LUN from IDENTIFY message
* Added comment
* Updated REPORT LUNS
* Initlize LUN
* Logging update
* Support 32 LUNs
* rasctl display update
* Updated LUN check for LUNSs > 7
* Simplified LUN validation
* Fixed wrong ID/LUN handling with values > 9
* Log level update
* Manpage update
* rascsi parser update
* Updated error handling
* Updated error handling
* Updated LUN setup validation
* Updated logging
* Improved validation of consecutive LUNs
* Renaming
* Detach all LUNs equal to or higher than the one specified
* Add support for LUN in the device list
* Add ability to show device info for LUNs
* Make it possible to detach and eject LUNs
* Show full path to prop file
* Show only LUN columns when non-0 LUNs present
* Support for attaching LUNs
* Add helptext
* Fix handling of removable media
* Retain the previous behavior of recommending the next unoccupied id
* SCSI ID validation no longer needed due to changed logic
* Make use of recommended id everywhere
* Docstring
Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
* Added VERSION_INFO
* Added LOG_LEVEL_INFO
* Added RESERVED_IDS_INFO
* Renaming
* Renaming
* Split rasctl
* Code cleanup
* Removed unused method
* Include cleanup
* More cleanup
* More cleanup
* Simplified sending commands
* Fully set up command
* Further simplified sending commands
* Moved code
* Include cleanup
* Reject reserving an ID that is in use
* Update rascsi-web for the changes in protobuf interface
Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
* Fixed compile time issues
* Fix compile time error in sasidump.cpp
* Fix comment in Makefile
* Fix compile time error in sasidump.cpp
* Restore rasdump and sasidump to BIN_ALL
* Fix typo
* Install rasdump and sasidump
* manpage for rasdump
* Create manpage for sasidump
Co-authored-by: Uwe Seimet <Uwe.Seimet@seimet.de>
* Fixed issue with attaching protected devices
* Fixed same issue when inserting a file
* Added IMAGE_FILE_INFO command
* rasctl output update
* Added file mode and type
* Datat type update
* Reverted change
* Update web ui for protobuf changes
Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
* Added MAPPING_INFO command, returning the mapping of extensions to types
* Updated help message
* Set explicit vendor/product/revision for .hda extension
* Added leading blanks to vendor and product for .hda
* Product string update
* Fixed typo in help string
* Manpage update
* Spoof hda as a Quantum Fireball
Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
* Added GET_IMAGE_FILES
* Added default folder to GET_IMAGE_FILES
* Renaming
* Updated setting image folder
* Fixed default image folder handling
* Added NETWORK_INTERFACES_INFO
* Filter "lo"
* Use PF_INET in favor of PF_INET6
* Added network interfaces to server info
* Filter rascsi_bridge
* Use list of available network interfaces as default parameters
* Use foreach
* Renaming
* Revert "Renaming"
This reverts commit b0554b9c0a.
* Manpage updates
* Removed obsolete assertions
* Replaced QWORD by uint64_t and removed respective typedef
* Removed LPCSTR typedef
* Removed LPCTSTR typedef
* Removed LPTSTR typedef
* Renamed SCSI command interface classes
* Renamed xm6.h to rascsi.h
* Moved interface classes to new interfaces subfolder
* Added include
* Fixed compilation issues of 64 bit Ubuntu
* Renaming
* Sort block sizes
* protobuf interface description update
* Fixed handling for sector size for non-disk devices
* Fixed typo
* Fixed comment
* Translate code commends into English, removing redundant ones (#214)
* Comment update
* For other bridge interfaces than eth0 IP address and netmask can be provided
* Added special rule for testing on x86 PCs
* Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* Comment update
* Removed unused typedefs
* Added special rule for testing on x86 PCs
* Comment update
* Comment update
* Updated capacity calculation
* Updated protobuf interface to signal parameter support
* Simplified protobuf interface
* Updated rasctl server info output
* Updated logging
* protobuf interface has to return block only if it is configurable
* Updated block size handling
* Improved error message if ID is already in use
* Removed typedef
* Renamed protobuf interface method
* Renaming
* Use protobuf::Messsge instead of protobuf::MessageLite
* default_image_folder cannot be an empty string, removed obsolete check
* Logging update
* Made some error messages more concise
* Removed magic constant
* Updated error message
* Comment update
* Names of removable media drives must be constant and not contain the capacity
* Improved DeviceFactory error handling
* More error handing improvements
* Interface comment update
* Pass interface list to ctapdriver when creating bridge
* Moved initialization code
* Updated rasctl server information output
* Improved handling of MO capacities
* Renaming
* Comment update
* Reject inserting a medium when there is already a medium present (eject first)
* Save list of files in use before dry-run
* Updated rasctl server info message
* Comment update
* Fixed typo
* Cleaned list handling
* Sort devices list by ID *and unit*
* Improved block size check
* Fixed issue with missing method in old Raspberry Pi OS protobuf implementation
* Updated error message
* Improve and fix bugs with saving&loading configuration files for rascsi-web (#218)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Removed unused structures, code and type cleanup
* Use unscoped enums for commands
* SASI Format opcode is 0x06, not 0x04 (see comment in code)
* Removed duplicate command
* Code review, data type updates
* Data type updated, use #pragma once
* Logging update
* Renaming
* Renaming
* Removed duplicate code
* Renaming
* Refactoring
* Removed TODO
* Updated logging
* Comment update
* Comment update
* Updated GetEventStatusNotification
* Removed goto
* Options -h and -v do not require to be the root user (fixes issue #166)
* Updated error messages and exception handling
* Added number of supported LUNs to protobuf interface
* Updated list handling of protobuf interface
* Comment update
* Improved error handling
* Added missing return statement
* Allow empty device list
* Fixed unnecessary detach_all() when config file isn't read (#221)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Protecting/unprotecing a non-ready medium is considered not possible
* Updated error message
* Extract detaching all devices, add parameter list support
* Comment update
* Fixed typos
* Restore files in use if dry-run fails
* Feature configurable reserved id for rascsi-web (#223)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior.
* Make it possible to reserve multiple scsi ids in the web ui
* Added support for reserved IDs
* rasctl output update
* Re-ordered logging
* Logging update
* Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well.
* Updated string to integer conversions
* Improved string to integer conversion
* Move string to integer conversion to rasutil
* Removed unused variable
* Fixed detach, which did not remove the filename from the filenames set
* Re-added folder to gitignore
* Set/Display patch version
* Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well.
* Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui
* Updated interface comment
* Accept daynaport as legacy type
* Fixed typo
* Remove file from the list of files in use when ejected with a SCSI command
* Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT
* Fixed error handling
* Fixed filepath handling
* Added more device shortcuts to rasctl
* Fixed function declaration
* Extraced ATTACH and DETACH
* Extracted INSERT
* Simplified ProcessCmd
* Comment update
* Fixed memory leak
* Log information on whether a new device is protected or read-only
* Updated errro message
* Updated error message
* Initialize private fields
* Updated rasctl help message
* Added DEVICE_INFO to protobuf interface
* Improved error handling
* DEVICE_INFO supports device list
* Updated server info handling
* Unified result handling with oneof, all commands now return PbResult
* A result can always return a message string
* Fixed typo
* Simplified sending of commands
* Improved error handling
* Removed unused code
* Updated error handling
* Code cleanup
* Comment update
* Updated logging
* Updated error handling
* Updated handling of removed status for devices without image file support
* Comment update
* Fixed typo
* Updated logging
* Updated parameter handling
* Updated setting default interfaces
* Revert "Updated setting default interfaces"
This reverts commit 210abc775d.
* Revert "Updated parameter handling"
This reverts commit 35302addd5.
* rascsi supports reserving IDs
* Updated help message
* Replaced BOOL by bool
* Logging update
* Logging update
* Added default parameters to device properties
* Return parameters a device was set up with
* Improved device initialization
* Updated default parameter handling
* Updated default parameter handling
* Fixed typo
* Comment updates
* Comment update
* Manage default parameters in the respective device
* Do not pass empty parameter string
* Added supports_params flag
* Made comparisons more consistent
* Updated error handling
* Updated exception handling
* Renaming
* Comment update
* NEC sectors size must be 512 bytes
* Updated logging
* Updated vendor name handling
* Updated handling of media loading/unloading
* Added stoppable property and stopped status
* Made MO stoppable
* Removed duplicate code
* Removed duplicate code
* Copy read-only property
* Renaming
* Removed duplicate code, added START/STOP
* Improved default parameter handling
* Updated load/eject handling
* Logging update
* Fixed typo
* Verified START/STOP UNIT
* Updated logging
* Updated status handling
* Updated status handling
* More status handling updates
* Logging update
* Made instance fields local variables
* Made disk_t private
* Made some data structures private
* Fixed ARM compile issue
* Fixed ctapdriver initialization issue
* Reset read-only status when opening an image file
* Made logging more consistent
* Updated log level
* Log load/eject on error level for testing
* Revert "Log load/eject on error level for testing"
This reverts commit d35a15ea8e.
* Assume drive is not ready after having been stopped
* Updated status handling
* Fixed typo
* Rebuild manpage
* Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header)
* Removed unused code
* Enum data type update
* Removed duplicate range check
* Removed duplicate code
* Removed more duplicate code
* Logging update
* SCCD sector size was not meant to be configurable
* Updated configurable sector size properties
* Removed assertion
* Improved error handling
* Updated error handling
* Re-added special error handling only relevant for SASI
* Added TODOs
* Comment update
* Added override modifier
* Removed obsolete debug flag (related code was not called)
* Comment and logging updates
* Removed obsolete try/catch
* Revert "Removed obsolete try/catch"
This reverts commit 39ca12d8b1.
* Comment update
* Removed duplicate code
* Updated error messages, use more foreach loops
* Updated logging
* Logging update
* README update
* Added block_count
* Evaluate block size when inserting a media
* rasctl display capacity if available
* Info message update
* Added missing product name to NEC vital product data
* MO block size depends on capacity only
* Extended property/status display
* Property display update
* Updated error handling
* (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations
Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
Co-authored-by: Tony Kuker <akuker@gmail.com>
* Device type unification, support of removable media
* Added support for .hdr extension
* Removable flag cleanup
* Manpage update
* Enriched PbOperation with PbDevice
* Added file size to PbImageFile
* Added device list support
* Set image_file
* Make remote interface more robust by ignoring SIGPIPE
* Return status only once
* Fixed typo
* Error handling update
* When starting rascsi parse everything before attaching devices
* Added dry run mode
* Comment update
* Updated logging
* Added Device base class, Disk class inherits from it
* Renaming
* Use vectors for controllers and disks, as preparation for using maps
* Updated file support handling
* Comment update
* DaynaPort and Bridge inherit from Device instead of Disk
* ProcessCmd() now works with devices instead of disks
* Renaming
* Added DeviceFactory
* Improved factory
* Comment update
* protected disk_t
* Code cleanup, added translations
* Device name can be set for rascsi
* rasctl can set device name
* Manpage update
* Manpage update
* Formatting update
* Check for missing name
* Initialize fd
* Initialize type
* Fixed string length issue
* Updated capacity formatting
* Fixed typo
* Split PbDevice into device and device definition
* Added TODO
* Renaming
* Renaming
* Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore)
* Fixed compile-time issue
* Removed unused Append mode, updated read-only handling
* Type handling and manpage update
* Cleanup
* rasctl parser cleanup
* Review
* Constructor update
* Added .hdr (SCRM) support to web interface, tested web interface
* Default folder can be set remotely
* Removed deprecated operation
* DETACH supports all parameters in order to detach all devices
* include cleanup
* Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical
* INFO is default log level
* Exception renaming
* Updated GetPaddedName()
* Inheritance update
* Added BlockDevice class
* Removed unused code
* Updated typedefs
* Revert "Updated typedefs"
This reverts commit 546b46215a.
* Removed unused code
* Fixed warnign
* Use standard C++ integer types, use streams to resolve printf data type issues
* Added TODOs
* Added TODO
* Renaming
* Added TODO
* Added TODO
* Improved dry-run
* Code cleanup
* Updated handling of unknown options, code review and cleanup
* Manpage update
* Added PrimaryDevice
* Include cleanup
* Added pure virtual methods
* Comment updates
* Split rasutil
* Replaced some occurrences of BOOL
* Removed obsolete RASCSI definition in xm6.h
* Removed unused code, updated TODOs, replaced BOOL
* Added capacity check (issue #192)
* Fixed (most likely) https://github.com/akuker/RASCSI/issues/191
* Fixed wrong error messages
* For root the default image folder is /home/pi/images, updated error handling
* Dynaport code review
* Improved error handling
* Implemented READ CAPACITY(16)
* Comment update
* Commands can be 16 bytes long
* Implemented READ/WRITE/VERIFY(16)
* Comment update
* Renamed method to reflect the name of the respective SCSI command
* Do not created devices during dryRun
* Fixed padding of SCSIHD_APPLE vendor and product
* Initial implementation
* Updated ReportLuns
* Byte count update
* Fixed typo
* Finalized REPORT LUNS
* Removed TODO
* Updated TODO
* TODO update
* Updated device factory
* Comment update
* 64 bit update, tested on Ubuntu 64 bit system
* Removed assertion
* SCSI hard disks always have Apple specific mode pages (resolves issue #193)
* Error messsage update, 64 bit cleanup
* Reduced streams usage
* Updated handling of device flags
* MOs are protectable
* Removed duplicate error code handling
* Removed duplicate code
* Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194)
* Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings
* HD must set removable device bit if the media is removable
* Removed duplicate logging
* Updated daynaport additional length
* Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac.
* EnableInterface should not always return TRUE
* Updated Inquiry
* Updated LUN handling
* Replaced incorrect free by delete
* Updated comments and write-protection handling
* Made default HD name consistent
* STATUS_NOERROR is default
* Fixed Eject
* More eject handling updates
* Manpage updates
* Logging update
* Changed debug level
* Logging update
* Log capacity of all media types
* Logging update
* Encapsulated disk.blocks
* Encapsulated sector size
* Added overrides
* Added more overrides
* Fixed error message
* Fixed typos
* Fixed logging
* Added logging
* Use PrimaryDevice when calling Inquiry
* Comment update
* Changed default buffer size for testing
* Reverted last change
* Removed debug output
* De-inlined methods because optimized code did not work with them inlined
* Web interface can attach Daynaport again
* Improved handling of read-only hard disks
* Fixed issue with "all" semantics of DETACH
* rasctl supports adding removable media devices without providing a filename
* Removed unused flag in PbDeviceDefinition
* Updated rasctl output for ecjected media (resolves issue #199)
* Validate default folder name when changing default folder
* PbDevice returns information on whether a device is removable
* Fixed log message
* Added additional status data (ejectable, protctable, removable)
* Assume ejectable == removable
* Removed obsolete fields
* Added locked/lockable to interface
* Code review
* Logging update
* The user should be allowed to also write protect hard disk drives
* Updated error handling
* Testing
* INSERT also has to search in the default file folder
* Added TODO
* Manpage update
* Message updates
* Moved some sanity checks to the server, so that they are run for any client
* Updated error handling
* Moved CR/LF handling to the client, the server should not format too much
* rascsi should not mention "rasctl" in its messages, there may be other clients
* Improved error messages
* Improved error handling by returning an error string
* Added TODO
* Moved check for duplicate ID to ProcessCmd()
* Removed debug output
* Moved include
* Removed obsolete includes, updated includes
* Reverted ready check
* Fixed error messages
* Added convenience method
* Simplified error handling
* Socket/error handling review
* "NO MEDIA" is added by the client, not by the server
* Added missing include
* Only check for duplicate ID when attaching a device
* Added type/string converters for PbDeviceType
* PbDevice indicates whether image files are supported
* Write-protecing a read-only devices is not treated as an error anymore
* Updated read-only check
* Made difference between read-only and protected more explicit
* Added comment
* Comment update
* Made hard disk drives write-protectable by the user
* Resolved https://github.com/akuker/RASCSI/issues/166
* Addressing compiler error - type needs to be initialized
Co-authored-by: akuker <akuker@gmail.com>
* #7 Re-merge scsimon functionality with latest master. The old scsimon branch was waaaaay too out of date
* #7 Re-merge scsimon functionality with latest master. The old scsimon branch was waaaaay too out of date
* Added libspdlog-dev as a required package
* Cleanup from master re-base
* Updated to use GCC version 8, to match the raspberry pi
Co-authored-by: akuker <akuker@gmail.com>
