RASCSI/cpp/hal/gpiobus.h
Uwe Seimet 5542fa9e7c
Re-add CONNECT_TYPE_CONNECT_TYPE_AIBOM and CONNECT_TYPE_GAMERNIUM (#1315) (#1317)
* Re-add CONNECT_TYPE_CONNECT_TYPE_AIBOM and CONNECT_TYPE_GAMERNIUM
2023-11-08 13:27:49 +01:00

219 lines
6.7 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//---------------------------------------------------------------------------
//
// SCSI Target Emulator PiSCSI
// for Raspberry Pi
//
// Powered by XM6 TypeG Technology.
// Copyright (C) 2016-2020 GIMONS
//
//---------------------------------------------------------------------------
#pragma once
#include "hal/bus.h"
#include "shared/scsi.h"
#include <memory>
#include <vector>
#ifdef __linux__
#include <linux/gpio.h>
#endif
//---------------------------------------------------------------------------
//
// Connection method definitions
//
//---------------------------------------------------------------------------
//#define CONNECT_TYPE_STANDARD // Standard (SCSI logic, standard pin assignment)
//#define CONNECT_TYPE_FULLSPEC // Full spec (SCSI logic, standard pin assignment)
//#define CONNECT_TYPE_AIBOM // AIBOM version (positive logic, unique pin assignment)
//#define CONNECT_TYPE_GAMERNIUM // GAMERnium.com version (standard logic, unique pin assignment)
#if defined CONNECT_TYPE_STANDARD
#include "hal/connection_type/connection_standard.h"
#elif defined CONNECT_TYPE_FULLSPEC
#include "hal/connection_type/connection_fullspec.h"
#elif defined CONNECT_TYPE_AIBOM
#include "hal/connection_type/connection_aibom.h"
#elif defined CONNECT_TYPE_GAMERNIUM
#include "hal/connection_type/connection_gamernium.h"
#else
#error Invalid connection type or none specified
#endif
// #define ENABLE_GPIO_TRACE
#ifdef ENABLE_GPIO_TRACE
#define GPIO_FUNCTION_TRACE LOGTRACE("%s", __PRETTY_FUNCTION__)
#else
#define GPIO_FUNCTION_TRACE
#endif
using namespace std;
//---------------------------------------------------------------------------
//
// Signal control logic and pin assignment customization
//
//---------------------------------------------------------------------------
//---------------------------------------------------------------------------
//
// SIGNAL_CONTROL_MODE: Signal control mode selection
// You can customize the signal control logic from Version 1.22
//
// 0:SCSI logical specification
// Conversion board using 74LS641-1 etc. directly connected or published on HP
// True : 0V
// False : Open collector output (disconnect from bus)
//
// 1:Negative logic specification (when using conversion board for negative logic -> SCSI logic)
// There is no conversion board with this specification at this time
// True : 0V -> (CONVERT) -> 0V
// False : 3.3V -> (CONVERT) -> Open collector output
//
// 2:Positive logic specification (when using the conversion board for positive logic -> SCSI logic)
// PiSCSI Adapter Rev.C @132sync etc.
//
// True : 3.3V -> (CONVERT) -> 0V
// False : 0V -> (CONVERT) -> Open collector output
//
//---------------------------------------------------------------------------
//---------------------------------------------------------------------------
//
// Control signal pin assignment setting
// GPIO pin mapping table for control signals.
//
// Control signal:
// PIN_ACT
// Signal that indicates the status of processing SCSI command.
// PIN_ENB
// Signal that indicates the valid signal from start to finish.
// PIN_TAD
// Signal that indicates the input/output direction of the target signal (BSY,IO,CD,MSG,REG).
// PIN_IND
// Signal that indicates the input/output direction of the initiator signal (SEL, ATN, RST, ACK).
// PIN_DTD
// Signal that indicates the input/output direction of the data lines (DT0...DT7,DP).
//
//---------------------------------------------------------------------------
//---------------------------------------------------------------------------
//
// Control signal output logic
// 0V:FALSE 3.3V:TRUE
//
// ACT_ON
// PIN_ACT signal
// ENB_ON
// PIN_ENB signal
// TAD_IN
// PIN_TAD This is the logic when inputting.
// IND_IN
// PIN_ENB This is the logic when inputting.
// DTD_IN
// PIN_ENB This is the logic when inputting.
//
//---------------------------------------------------------------------------
//---------------------------------------------------------------------------
//
// SCSI signal pin assignment setting
// GPIO pin mapping table for SCSI signals.
// PIN_DT0PIN_SEL
//
//---------------------------------------------------------------------------
//---------------------------------------------------------------------------
//
// Constant declarations (GPIO)
//
//---------------------------------------------------------------------------
const static int GPIO_INPUT = 0;
const static int GPIO_OUTPUT = 1;
const static int GPIO_IRQ_IN = 3;
const static int GPIO_PULLNONE = 0;
const static int GPIO_PULLDOWN = 1;
const static int GPIO_PULLUP = 2;
//---------------------------------------------------------------------------
//
// Constant declarations (Control signals)
//
//---------------------------------------------------------------------------
#define ACT_OFF !ACT_ON
#define ENB_OFF !ENB_ON
#define TAD_OUT !TAD_IN
#define IND_OUT !IND_IN
#define DTD_OUT !DTD_IN
//---------------------------------------------------------------------------
//
// Constant declarations (SCSI)
//
//---------------------------------------------------------------------------
#define IN GPIO_INPUT
#define OUT GPIO_OUTPUT
const static int ON = 1;
const static int OFF = 0;
//---------------------------------------------------------------------------
//
// Class definition
//
//---------------------------------------------------------------------------
class GPIOBUS : public BUS
{
public:
// Basic Functions
GPIOBUS() = default;
// Destructor
~GPIOBUS() override = default;
// Initialization
bool Init(mode_e mode = mode_e::TARGET) override;
// Command receive handshake
int CommandHandShake(vector<uint8_t>&) override;
// Data receive handshake
int ReceiveHandShake(uint8_t *, int) override;
// Data transmission handshake
int SendHandShake(uint8_t *, int, int) override;
// SEL signal event polling
bool PollSelectEvent() override;
// Clear SEL signal event
void ClearSelectEvent() override;
protected:
virtual void MakeTable() = 0;
bool GetSignal(int pin) const override = 0;
void SetSignal(int pin, bool ast) override = 0;
bool WaitSignal(int pin, bool ast);
// Wait for a signal to change
virtual bool WaitREQ(bool ast) = 0;
virtual bool WaitACK(bool ast) = 0;
// Interrupt control
virtual void EnableIRQ() = 0;
virtual void DisableIRQ() = 0;
// Set GPIO output signal
virtual void PinSetSignal(int pin, bool ast) = 0;
// Set GPIO drive strength
virtual void DrvConfig(uint32_t drive) = 0;
// Operation mode
mode_e actmode = mode_e::TARGET;
#ifdef __linux__
// SEL signal event request
struct gpioevent_request selevreq = {};
// epoll file descriptor
int epfd = 0;
#endif
};