RASCSI/doc/rasctl_man_page.txt
2021-09-17 11:11:22 +02:00

134 lines
5.3 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

!! ------ THIS FILE IS AUTO_GENERATED! DO NOT MANUALLY UPDATE!!!
!! ------ The native file is rasctl.1. Re-run 'make docs' after updating\n\n
rascsi(1) General Commands Manual rascsi(1)
NAME
rasctl - Sends management commands to the rascsi process
SYNOPSIS
rasctl -l | -s | [-d IMAGE_FOLDER] [-g LOG_LEVEL] [-h HOST] [-p PORT]
[-r RESERVED_IDS] [-v] -i ID [-c CMD] [-f FILE|PARAM] [-n NAME] [-t
TYPE] [-u UNIT]
DESCRIPTION
rasctl Sends commands to the rascsi process to make configuration ad
justments at runtime or to check the status of the devices.
Either the -i or -l option should be specified at one time. Not both.
You do NOT need root privileges to use rasctl.
Note: The command and type arguments are case insensitive. Only the
first letter of the command/type is evaluated by the tool.
OPTIONS
-a FILENAME:FILESIZE
Create an image file in the default image folder with the speci
fied name and size in bytes.
-g IMAGE_FOLDER
Set the default image folder.
-g LOG_LEVEL
Set the rascsi log level (trace, debug, info, warn, err, criti
cal, off).
-h HOST
The rascsi host to connect to, default is 'localhost'.
-l List all of the devices that are currently being emulated by
RaSCSI, as well as their current status.
-m CURRENT_NAME:NEW_NAME
Rename an image file in the default image folder.
-p PORT
The rascsi port to connect to, default is 6868.
-r RESERVED_IDS
Comma-separated list of IDs to reserve.
-s Display server-side settings like available images or supported
device types.
-v Display the rascsi version.
-w FILENAME
Delete an image file in the default image folder.
-x CURRENT_NAME:NEW_NAME
Copy an image file in the default image folder.
-i ID ID is the SCSI ID that you want to control. (0-7)
-c CMD Command is the operation being requested. Options are:
a(ttach): Attach disk
d(etach): Detach disk
i(nsert): Insert media (removable media devices only)
e(ject): Eject media (removable media devices only)
p(rotect): Write protect the medium (not for CD-ROMs, which
are always read-only)
u(nprotect): Remove write protection from the medium (not for
CD-ROMs, which are always read-only)
s(how): Display device information
eject, protect and unprotect are idempotent.
-b BLOCK_SIZE
The optional block size. For SCSI drives 512, 1024, 2048 or 4096
bytes, default size is 512 bytes. For SASI drives 256 or 1024
bytes, default is 256 bytes.
-f FILE|PARAM
Device-specific: Either a path to a disk image file, or a param
eter for a non-disk device. See the rascsi(1) man page for per
mitted file types.
-t TYPE
Specifies the device type. This type overrides the type derived
from the file extension of the specified image. See the
rascsi(1) man page for the available device types. For some
types there are shortcuts (only the first letter is required):
hd: SCSI hard disk drive
rm: SCSI removable media drive
cd: CD-ROM
mo: Magneto-Optical disk
bridge: Bridge device (Only applicable to the Sharp X68000)
daynaport: DaynaPORT network adapter
-n VENDOR:PRODUCT:REVISION
The vendor, product and revision for the device, to be returned
with the INQUIRY data. A complete set of name components must be
provided. VENDOR may have up to 8, PRODUCT up to 16, REVISION up
to 4 characters. Padding with blanks to the maxium length is au
tomatically applied. Once set the name of a device cannot be
changed.
-u UNIT
Unit number (0 or 1). This will default to 0. This option is
only used when there are multiple SCSI devices on a shared SCSI
controller. (This is not common)
EXAMPLES
Show a listing of all of the SCSI devices and their current status.
rasctl -l
Example output:
+----+----+------+-------------------------------------
| ID | UN | TYPE | DEVICE STATUS
+----+----+------+-------------------------------------
| 0 | 1 | SCHD | /home/pi/harddisk.hda
+----+----+------+-------------------------------------
Request the RaSCSI process to attach a disk (assumed) to SCSI ID 0 with
the contents of the file system image "HDIIMAGE0.HDS".
rasctl -i 0 -f HDIIMAGE0.HDS
SEE ALSO
rascsi(1) scsimon(1)
Full documentation is available at:
<https://www.github.com/akuker/RASCSI/wiki/>
rascsi(1)