Michael McMaster
026583b1fd
Fix bug in using nor flash storage without SD
2021-03-22 13:48:51 +10:00
Michael McMaster
8becbd1827
More v5.2 bug fixes
2021-03-16 23:13:06 +10:00
Michael McMaster
c6d35e2a72
SPI Flash DMA support
2021-01-31 12:13:38 +10:00
Michael McMaster
b5cfe91cc5
Implement reading spi flash over SCSI
2021-01-28 07:20:13 +10:00
Michael McMaster
c8eb8a88f4
Fix up compilation issues
2021-01-06 22:14:36 +10:00
Michael McMaster
35dec8a9fe
Untested port of V6 multidev branch commit 3dc7c11acb55b16fd0a8a033f9fe877d7b18f269
2021-01-02 22:51:19 +10:00
Michael McMaster
1d57ede2e7
Fix compile issue
2019-12-09 20:40:09 +10:00
Michael McMaster
54ac6377ce
Add READ DEFECT DATA command emulation
2019-12-02 19:25:08 +10:00
Michael McMaster
bc8faaea31
Add 10ms delay to seek command
2019-03-02 15:12:29 +10:00
Michael McMaster
381a4f7d67
Fix for multiple devices on the scsi bus.
2018-09-19 22:10:24 +10:00
Michael McMaster
258da24a7a
Added V5.1 support, XEBEC support, and fixed some bugs.
2018-04-15 22:10:01 +10:00
Michael McMaster
56f1d31703
Bug fixes galore! Added lots more settings, and moved them into another config tab
...
- wxWidgets upgrade to 3.02
- PSoC Creator upgrade to 3.3
2015-10-30 13:43:44 +10:00
Laurent Vivier
0c1e0071de
CDROM: allow to boot from MacOS 7.6 CDROM
...
Reading one sector from the CDROM is always reading several (4)
from the SD card, so always set multBlock to one in this case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2015-09-25 00:45:58 +02:00
Michael McMaster
ceb8d24303
Add DB25 adapter hardware design, plus other minor fixes
2015-09-23 20:23:45 +10:00
Michael McMaster
9f5624ddd7
Performance fixes, scsi2sd-util crash fixes, scsi2 config option.
2015-07-21 10:55:08 +10:00
Michael McMaster
1b14acad1a
Removed default config from flash.
...
The bootloader checksum check fails if the configuration is changed.
2015-04-26 08:10:09 +10:00
Michael McMaster
9ad7cc15d0
Small compatibility improvements, and added scsi2sd-monitor test program
2015-04-20 16:09:51 +10:00
Michael McMaster
95b519789b
Implement WRITE BUFFER and WRITE WITH VERIFY commands
...
Also fixes a problem with SD card initialisation not setting
the clock back to normal on an error condition. The next
initialisation attempt ends up running the card at a very slow
rate.
2015-02-20 16:56:27 +10:00
Michael McMaster
70257ca867
SD card interface rewrite to improve compatibility with some SD cards.
...
- Fixed write problems with Samsung SD card controllers
- Added workaround to prevent timeouts on slow writes.
- Upgrade to PSoC Creator 3.1 and gcc 4.8.4
2015-02-01 13:42:01 +10:00
Michael McMaster
64fed3d6b1
Change default configuration to 2GB limit, no parity, no attention.
2015-01-08 20:54:27 +10:00
Michael McMaster
638c94ce5c
scsi2sd-util bug fixes and hot swap support.
2014-12-23 09:22:01 +10:00
Michael McMaster
b19a0a4c7c
Emulation of multiple SCSI targets now working.
...
The CDROM device support has a few bugs, as does scsi2sd-util
2014-12-05 13:17:06 +10:00
Michael McMaster
a8cd4216a2
Fixed parity handling to respect the --no-parity config option.
...
- Automatically disable parity checks for old SASI/SCSI1 hosts.
- Add scsi disconnect/reconnect support for long SD card writes.
2014-10-09 09:47:46 +10:00
Michael McMaster
7db82a4e4a
Added glitch filter on ACK line, registered all outputs, double-synced inputs, and fixed parity checks.
2014-08-28 23:28:09 +10:00
Michael McMaster
5e0f1e3360
Added support for v4.2 boards
...
Renamed "pbook" firmware to "v4". Original "green" boards now under "v3".
Add external LED support for v4 firmware.
Added --reset to scsi2sd-config
bootloaderhost can now reset the board.
2014-07-12 23:55:57 +10:00
Michael McMaster
5ede6f0d07
Updating Powerbook firmware with the latest mainline changes.
2014-06-23 13:52:05 +10:00
Michael McMaster
092541dd02
Fix DMA transfer bug.
2014-05-30 23:35:19 +10:00
Michael McMaster
5bcd0c3a18
Use DMA for SCSI and SD card transfers for a massive performance boost.
2014-05-30 11:09:55 +10:00
Michael McMaster
db9c316019
More compatibility and bug fixes.
...
- Maximum sector size increased to 8192
- Fix for REQUEST SENSE to support Ensoniq ASR-10
- Fix to configurable sector sizes
2014-05-18 13:42:51 +10:00
Michael McMaster
767f12e481
Adding Ensoniq ASR-10 support and improved FORMAT UNIT command.
...
- Read the data-phase bytes during a FORMAT UNIT command
- Return the exact number of bytes requested for the REQUEST SENSE command
2014-04-29 17:40:22 +10:00
Michael McMaster
0bb5ed8349
Added configurable block-size support
2014-03-28 00:24:33 +10:00
Michael McMaster
abe0a5f51a
Powerbook firmware!
...
Includes updates to the bootloderhost utility to compare the USB device release
number against an expected firmware filename to prevent loading the Powerbook
firmware on the normal board, and vice-versa.
2014-03-23 08:36:29 +10:00