Mirror the Mac SE video over VGA
Go to file
2023-07-14 15:39:14 -05:00
Hardware Add initial PCB render 2023-07-14 15:31:38 -05:00
LICENSE Add CC-BY-SA license and initial Rev3 Readme 2023-07-14 15:25:57 -05:00
README.md Upload new schematic plot 2023-07-14 15:36:11 -05:00
SE-VGA_Schematic.pdf Upload new schematic plot 2023-07-14 15:36:11 -05:00
se-xga.sv Mostly working 2021-10-22 22:18:44 -05:00

SE-VGA

SE-VGA is a video card primarily for the Mac SE, but also compatible with the Macintosh, 512k, and Plus. The FPGA configuration here will duplicate the Mac video pixel-doubled to 1024x768 and displayed letterboxed (black borders) in a 1024x768@60Hz frame over VGA. It does this by snooping the CPU bus for writes to the frame buffer region of memory, caching the video data in its own VRAM, and generating a new video signal from that data. It can plug directly into the PDS slot in a Mac SE, or plugs in place of the CPU on the Plus, 512k, or 128k models (CPU must be removed and a socket installed in its place; the CPU must then be installed on the SE-VGA card).

Circuit is built around a Latice iCE40HX4K FPGA with a single 16-bit SDRAM, theoretically supporting up to 512Mbit (64MB) of video memory. Video output is a 24-bit R2R DAC with output buffer. The PCB is designed as a 4-layer board with inner power and ground planes. Use of a PCB assembly service is recommended for the many 0402 passive components.

The memory capacity and output capabilities of this project greatly exceed those necessary for duplicating the classic Macintosh video output in the hopes that it may be a starting point for projects which go beyond merely duplicating the classic Macintosh video output.

MacSE Rev3 PCB Render

Bill of Materials

Qty Manufacturer Part No. Name Description

Frame Buffer Addressing

The Mac primary framebuffer starts at 0x5900 below the top of RAM. Since it's not in a static location for every system, the system's memory configuration is needed. This is set by the Memory Size switches/jumpers. The chart below indicates the primary and alternate frame buffer locations based on the installed SIMM combinations in the Mac Plus/SE, as well as for the 512k & 128k models.

Main Framebuffer Alt Framebuffer RAM Top Address + 1 RAM Size Installed SIMMs
0x3fa700 0x3f2700 0x400000 4.0MB [ 1MB 1MB ][ 1MB 1MB ]
0x37a700 0x372700 0x380000 3.5MB Invalid combination
0x2fa700 0x2f2700 0x300000 3.0MB Invalid combination
0x27a700 0x272700 0x280000 2.5MB [ 1MB 1MB ][256kB 256kB]
0x1fa700 0x1f2700 0x200000 2.0MB [ 1MB 1MB ][ --- --- ]
0x17a700 0x172700 0x180000 1.5MB Invalid combination
0x0fa700 0x0f2700 0x100000 1.0MB [256kB 256kB][256kB 256kB]
0x07a700 0x072700 0x080000 512kB [256kB 256kB][ --- --- ]
0x01a700 0x012700 0x020000 128kB NA

FPGA Pin Assignments

signal Direction Pin

Known Issues

  • Logic has not yet been rewritten for the iCE40 FPGA

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. See https://creativecommons.org/licenses/by-sa/4.0/.

Acknowledgements

Special thanks to TubeTimeUS, whose Graphics Gremlin project answered many of the questions I had while designing this project. https://github.com/schlae/graphics-gremlin