Fixed IOBS bugs

This commit is contained in:
Zane Kaminski 2023-03-31 06:14:53 -04:00
parent 64acc12a9d
commit a3c913c8c3

View File

@ -22,13 +22,11 @@ module IOBS(
/* Read data OE control */
assign nDinOE = !(!nAS && IOCS && nWE && !ROMCS);
wire IOStart = BACT && IOCS && ~Once;
/* I/O transfer state
* TS0 - I/O bridge idle:
* asserts IOREQ
* transitions to TS3 when IOStart true
* transitions to TS3 when BACT && IOCS && !ALE1 && !Once true
* TS3 - starting I/O transfer:
latches LDS and UDS from FSB or FIFO secondary level
transitions immediately to TS2
@ -48,7 +46,7 @@ module IOBS(
always @(posedge CLK) begin
// If write currently posting (TS!=0),
// I/O selected, and FIFO secondary level empty
if (TS!=0 && IOStart && ~ALE1) begin
if (TS!=0 && BACT && IOCS && !ALE1 && !Once && IOPWCS) begin
// Latch R/W now but latch address and LDS/UDS next cycle
IORW1 <= nWE;
Load1 <= 1;
@ -77,7 +75,7 @@ module IOBS(
TS <= 3;
IOREQ <= 1;
IORW0 <= IORW1;
end else if (IOStart) begin // If I/O selected and FIFO empty
end else if (BACT && IOCS && !ALE1 && !Once) begin // If I/O selected and FIFO empty
// Request transfer from IOBM and latch R/W from FSB
TS <= 3;
IOREQ <= 1;
@ -114,7 +112,7 @@ module IOBS(
end else if (TS==1) begin
// Wait for IOACT low (transfer over) before going back to idle
if (~IOACTr) TS <= 0;
else TS <= 2;
else TS <= 1;
IOREQ <= 0;
// Address latch released since it's controlled by IOBM now
ALE0 <= 0;
@ -124,14 +122,14 @@ module IOBS(
/* Once, ready, BERR control */
always @(posedge CLK) begin
if (~BACT) Once <= 0;
else if (IOCS && !ALE1 && (TS==0 || IOPWCS)) Once <= 1;
else if (BACT && IOCS && !ALE1 && !Once && (TS==0 || IOPWCS)) Once <= 1;
end
always @(posedge CLK) begin
if (~BACT) begin
// Deassert IOReady and /BERR when bus inactive
IOReady <= 0;
nBERR_FSB <= 1;
end else if (Once && !ALE1 && (TS==0 || (TS==1 && !IOACTr))) begin
end else if (BACT && IOCS && !IOPWCS && !ALE1 && Once && (TS==0 || (TS==1 && !IOACTr))) begin
// If transaction submitted, FIFO second level empty,
// and in or entering TS0, all transactions including
// current are complete. So terminate cycle.
@ -139,6 +137,6 @@ module IOBS(
nBERR_FSB <= !IOBERR;
end
end
assign IOBS_Ready = !IOCS || IOReady || (IOPWCS && !ALE1);
assign IOBS_Ready = !IOCS || ((IOReady) || (IOPWCS && !ALE1));
endmodule