Merge pull request #51 from TomRBarber/patch-1

Update assembly.md
This commit is contained in:
Eric Helgeson 2021-10-08 20:04:42 -05:00 committed by GitHub
commit 979448853d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -16,7 +16,7 @@ The community has created a few assembly videos:
1. Solder on the surface mount SD Card holder. Use the [Drag Solder](https://youtu.be/Z_KL4fWOMug) technique.
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
- Ensure the SD card fits and you dont have too much solder on the sides or contacts
2. Solder the dioeds to the **bottom** of the board. Be sure they are flush as possible to the bottom.
2. Solder the diodes to the **bottom** of the board. Be sure they are flush as possible to the bottom.
![Diode Orientation](images/diodes.png)
3. Solder the header pins on to the BluePill. Then BluePill pill to the BlueSCSI PCB.
- Correct orientation is having the USB connector of the BluePill should be over the SD Card holder.