Refer to github.com/dgsga/netatalk in README.md

Update readme.md to reflect code changes from December 2020.

README.md

@@ -1,26 +1,44 @@
 ## afpfs-ng for macOS / OS X
 
+```diff
+-                                 A N N O U N C E M E N T                                
+
+- dgsga ported netatalk to compile and run on macOS!
+
+- While afpfs-ng is in fact immature and incomplete, netatalk has been developed and
+- refined over many years making it a solid software.
+
+- So everyone who came here looking for a solution to network his Classic Mac or emulator
+- (running up to Mac OS 9.2) with modern macOS, I’d like to encourage using his solution.
+
+- Find his repository and the related discussion at the following links, respectively:
+```
+https://github.com/dgsga/netatalk
+
+https://www.emaculation.com/forum/viewtopic.php?f=34&t=11123
+
+
 ### Description
 
 macOS / OS X ships with the ability to mount volumes via AFP. However, OS X 10.6 and newer are not capable of AFP version 2.x or older which is needed to network with Classic MacOS (7.6 to 9.2 via IP).
 
-This version of afpfs-ng is based on Simon Vetter's version. It has fixes 'hacked in' to make it work with Fuse for macOS / OSXFUSE on macOS / OS X. As a consequence, it does not work with Fuse for Linux.
+This version of afpfs-ng is based on Simon Vetter’s version. It has fixes ‘hacked in’ to make it work with macFUSE on macOS / OS X. As a consequence, it does not work with Fuse for Linux.
 
-It is of use for you if you emulate Classic MacOS, e.g. using SheepShaver or QEMU. And of course if you own an old Macintosh you want to exchange files with.
+It is of use for you if you emulate Classic Mac OS, e. g. using SheepShaver or QEMU. And of course if you own an old Macintosh you want to exchange files with.
 
-macOS / OS X already makes use of the 'mount_afp' command. Thus in this version of afpfs-ng that command has been changed to 'mount_afp2' (to indicate it is for use with AFP v. 2.x).
+macOS / OS X already makes use of the ‘mount_afp’ command. Thus in this version of afpfs-ng that command has been changed to ‘mount_afp2’ (to indicate it is for use with AFP v. 2.x).
 
 
 ### Prerequesites
 
-Download and install Fuse for macOS from https://osxfuse.github.io/ (v. 3.7.1 as of writing this). The Fuse compatibility layer is NOT required.
+Download and install macFUSE from https://osxfuse.github.io/ (v. 4.0.5 as of writing this).
 
 
 ### Installation
 
-Either use the .pkg installer at https://github.com/mabam/afpfs-ng-OSX/releases or compile yourself as follows:
+Either use the .pkg installer at https://github.com/mabam/afpfs-ng-mac/releases or compile yourself as follows:
 
-AFP up to v. 2.x does not offer password encryption which is why we simply disable it rather than installing gcrypt on macOS / OS X first:
+I’m not sure whether AFP up to v. 2.x offers password encryption. But I didn’t succeed in compiling it in anyway, which is why I simply disabled it:
 ```bash
 ./configure --disable-gcrypt --enable-fuse
 ```
@@ -31,7 +49,7 @@ make
 sudo make install
 ```
 
-Also, I couldn't figure how to make the fuse components compile automatically on macOS / OS X. This is how to do that manually:
+Also, I couldn’t figure how to make the Fuse components compile automatically on macOS / OS X. This is how to do that manually:
 ```bash
 cd fuse
 ```
@@ -45,15 +63,18 @@ sudo make install
 
 ### Usage, credits and license
 
-Don't forget to load Fuse for macOS first:
+See https://github.com/mabam/afpfs-ng-mac/releases for a version with GUI.
+See https://emaculation.com/forum/viewtopic.php?f=34&p=58790#p58790 for some main issues.
+
+If you prefer using the shell, don’t forget to load macFUSE first:
 ```bash
 /Library/Filesystems/osxfuse.fs/Contents/Resources/load_osxfuse
 ```
-See README_old.md for examples on commands. But mind the change to 'mount_afp2'.
+See README_old.md for examples on commands. But mind the change to ‘mount_afp2’.
 
 There you can also find information on the license and credits.
 
-Credits for this macOS / OS X version goes to 'adespoton' for his guidance.
+Credits for this macOS / OS X version goes to ‘adespoton’ for his guidance.
 
 
 ### Links / further reading

config.h.in

@@ -33,7 +33,7 @@
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
-/* Define to 1 if you have the `fuse' library (-losxfuse). */
+/* Define to 1 if you have the `fuse' library (-lfuse). */
 #undef HAVE_LIBFUSE
 
 /* Define to 1 if you have the `gcrypt' library (-lgcrypt). */

configure

@@ -21824,13 +21824,13 @@ echo "$as_me: error: FUSE is not installed.  To build without fuse, configure wi
    { (exit 1); exit 1; }; }
 		fi
 
-{ echo "$as_me:$LINENO: checking for fuse_main in /usr/local/lib/libosxfuse.la" >&5
-echo $ECHO_N "checking for fuse_main in /usr/local/lib/libosxfuse.la... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: checking for fuse_main in /usr/local/lib/libfuse.la" >&5
+echo $ECHO_N "checking for fuse_main in /usr/local/lib/libfuse.la... $ECHO_C" >&6; }
 if test "${ac_cv_lib_fuse_fuse_main+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="/usr/local/lib/libosxfuse.la  $LIBS"
+LIBS="/usr/local/lib/libfuse.la  $LIBS"
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -21890,13 +21890,13 @@ if test $ac_cv_lib_fuse_fuse_main = yes; then
 #define HAVE_LIBFUSE 1
 _ACEOF
 
-  LIBS="/usr/local/lib/libosxfuse.la $LIBS"
+  LIBS="/usr/local/lib/libfuse.la $LIBS"
 
 fi
 
 		CFLAGS=$old_cflags
 		CPPFLAGS=$old_cppflags
-		LIBFUSE_LDFLAGS="/usr/local/lib/libosxfuse.la"
+		LIBFUSE_LDFLAGS="/usr/local/lib/libfuse.la"
 
 		 if true; then
   HAVE_LIBFUSE_TRUE=

configure.ac

@@ -79,7 +79,7 @@ case $host in
 		AC_CHECK_LIB([fuse], [fuse_main])
 		CFLAGS=$old_cflags
 		CPPFLAGS=$old_cppflags
-		LIBFUSE_LDFLAGS="/usr/local/lib/libosxfuse.la"
+		LIBFUSE_LDFLAGS="/usr/local/lib/libfuse.la"
 		AC_SUBST(LIBFUSE_LDFLAGS)
 		AM_CONDITIONAL(HAVE_LIBFUSE, true)
 	fi

fuse/Makefile.am

@@ -5,8 +5,8 @@ mount_afp2_CFLAGS = -I$(top_srcdir)/include -D_FILE_OFFSET_BITS=64 @CFLAGS@
 mount_afp2_LDADD = $(top_builddir)/lib/libafpclient.la
 
 afpfsd_SOURCES = commands.c daemon.c fuse_int.c fuse_error.c
-afpfsd_LDADD = $(top_builddir)/lib/libafpclient.la /usr/local/lib/libosxfuse.la
-afpfsd_LDFLAGS = -export-dynamic /usr/local/lib/libosxfuse.la
+afpfsd_LDADD = $(top_builddir)/lib/libafpclient.la /usr/local/lib/libfuse.la
+afpfsd_LDFLAGS = -export-dynamic /usr/local/lib/libfuse.la
 afpfsd_CFLAGS = -I$(top_srcdir)/include -D_FILE_OFFSET_BITS=64 @CFLAGS@
 
 install-data-hook:

fuse/Makefile.in

@@ -187,8 +187,8 @@ mount_afp2_SOURCES = client.c
 mount_afp2_CFLAGS = -I$(top_srcdir)/include -D_FILE_OFFSET_BITS=64 @CFLAGS@
 mount_afp2_LDADD = $(top_builddir)/lib/libafpclient.la
 afpfsd_SOURCES = commands.c daemon.c fuse_int.c fuse_error.c
-afpfsd_LDADD = $(top_builddir)/lib/libafpclient.la /usr/local/lib/libosxfuse.la
-afpfsd_LDFLAGS = -export-dynamic /usr/local/lib/libosxfuse.la
+afpfsd_LDADD = $(top_builddir)/lib/libafpclient.la /usr/local/lib/libfuse.la
+afpfsd_LDFLAGS = -export-dynamic /usr/local/lib/libfuse.la
 afpfsd_CFLAGS = -I$(top_srcdir)/include -D_FILE_OFFSET_BITS=64 @CFLAGS@
 all: all-am
 

fuse/commands.c

@@ -35,7 +35,7 @@
 #ifdef __linux
 #define FUSE_DEVICE "/dev/fuse"
 #else
-#define FUSE_DEVICE "/dev/osxfuse0"
+#define FUSE_DEVICE "/dev/macfuse0"
 #endif
 
 

fuse/fuse_int.c

@@ -20,7 +20,7 @@
 
 #include "afpfs-ng/afp.h"
 
-#include </usr/local/include/osxfuse/fuse.h>
+#include </usr/local/include/fuse.h>
 #include <stdio.h>
 #include <string.h>
 #include <errno.h>