lwip-contrib-mac/ports/ecos/README

44 lines
1.5 KiB
Plaintext
Raw Normal View History

2003-02-28 14:29:13 +00:00
This part of the lwip-contrib section is the ecos glue
Check out latest ecos or beta 2 if available and apply ioeth.diff to packages/io/eth
2003-02-28 14:29:13 +00:00
You must have the current lwip sources checked out and the scripts here will hopefully generate
a correct EPK suitable for use with ecos.
To make an ecos package:
Run the mkepk script something like this
# EPK=/dir/of/epk LWIP_CVS=/dir/of/checked/out/lwip ./mkepk
This will put the generated EPK in the dir you specify
then add that EPK to your package repository and use it
Build example:
#ecosconfig new edb7xxx kernel
#ecosconfig add lwip
this will default to SLIP connection.If you also
#ecosconfig add net_drivers
you'll be able to configure for ethernet
In both cases set LWIP_MY_ADDR and LWIP_SERV_ADDR (means host/gateway for eth or host/peer for slip)
#ecosconfig tree
#make tests
and you can try any of the five tests included
Tests:
udpecho - echo service port 7 on UDP
tcpecho - ditto on TCP
sockets - as tcpecho but written with the socket API not the lwip specific API
https - http server on port 80 written with the raw API
nc_test_slave - a port of the test with the same name in net/common to lwip. Used to compare
lwIP throughput to that of the FreeBSD stack.In this matchup lwIP gets a well deserved
silver medal.Not bad for a newcomer ;)
Bugreports (or even better patches) at jani@iv.ro not the lwip or ecos mailing lists!!
Only if you peek into the lwip sources and think you found a bug post to lwip-users.