/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ /* ---------- Memory options ---------- */ /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 byte alignment -> define MEM_ALIGNMENT to 2. */ #define MEM_ALIGNMENT 1 /* MEM_SIZE: the size of the heap memory. If the application will send a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE 1600 /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application sends a lot of data out of ROM (or other static memory), this should be set high. */ #define MEMP_NUM_PBUF 16 /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One per active UDP "connection". */ #define MEMP_NUM_UDP_PCB 4 /* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. */ #define MEMP_NUM_TCP_PCB 5 /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. */ #define MEMP_NUM_TCP_PCB_LISTEN 8 /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. */ #define MEMP_NUM_TCP_SEG 16 /* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. */ #define MEMP_NUM_SYS_TIMEOUT 3 /* The following four are used only with the sequential API and can be set to 0 if the application only will use the raw API. */ /* MEMP_NUM_NETBUF: the number of struct netbufs. */ #define MEMP_NUM_NETBUF 2 /* MEMP_NUM_NETCONN: the number of struct netconns. */ #define MEMP_NUM_NETCONN 4 /* MEMP_NUM_APIMSG: the number of struct api_msg, used for communication between the TCP/IP stack and the sequential programs. */ #define MEMP_NUM_API_MSG 8 /* MEMP_NUM_TCPIPMSG: the number of struct tcpip_msg, which is used for sequential API communication and incoming packets. Used in src/api/tcpip.c. */ #define MEMP_NUM_TCPIP_MSG 8 /* These two control is reclaimer functions should be compiled in. Should always be turned on (1). */ #define MEM_RECLAIM 1 #define MEMP_RECLAIM 1 /* ---------- Pbuf options ---------- */ /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #define PBUF_POOL_SIZE 6 /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ #define PBUF_POOL_BUFSIZE 128 /* PBUF_LINK_HLEN: the number of bytes that should be allocated for a link level header. */ #define PBUF_LINK_HLEN 16 /* ---------- TCP options ---------- */ #define LWIP_TCP 1 #define TCP_TTL 255 /* Controls if TCP should queue segments that arrive out of order. Define to 0 if your device is low on memory. */ #define TCP_QUEUE_OOSEQ 1 /* TCP Maximum segment size. */ #define TCP_MSS 128 /* TCP sender buffer space (bytes). */ #define TCP_SND_BUF 256 /* TCP sender buffer space (pbufs). This must be at least = 2 * TCP_SND_BUF/TCP_MSS for things to work. */ #define TCP_SND_QUEUELEN 4 * TCP_SND_BUF/TCP_MSS /* TCP receive window. */ #define TCP_WND 1024 /* Maximum number of retransmissions of data segments. */ #define TCP_MAXRTX 12 /* Maximum number of retransmissions of SYN segments. */ #define TCP_SYNMAXRTX 4 /* ---------- ARP options ---------- */ #define ARP_TABLE_SIZE 10 #define ARP_QUEUEING 1 /* ---------- IP options ---------- */ /* Define IP_FORWARD to 1 if you wish to have the ability to forward IP packets across network interfaces. If you are going to run lwIP on a device with only one network interface, define this to 0. */ #define IP_FORWARD 1 /* If defined to 1, IP options are allowed (but not parsed). If defined to 0, all packets with IP options are dropped. */ #define IP_OPTIONS 1 /* ---------- ICMP options ---------- */ #define ICMP_TTL 255 /* ---------- DHCP options ---------- */ /* Define LWIP_DHCP to 1 if you want DHCP configuration of interfaces. DHCP is not implemented in lwIP 0.5.1, however, so turning this on does currently not work. */ #define LWIP_DHCP 0 /* 1 if you want to do an ARP check on the offered address (recommended). */ #define DHCP_DOES_ARP_CHECK 1 /* ---------- UDP options ---------- */ #define LWIP_UDP 1 #define UDP_TTL 255 /* ---------- Statistics options ---------- */ /*#define LWIP_STATS 1*/ #ifdef LWIP_STATS #define LINK_STATS 1 #define IP_STATS 1 #define ICMP_STATS 1 #define UDP_STATS 1 #define TCP_STATS 1 #define MEM_STATS 1 #define MEMP_STATS 1 #define PBUF_STATS 1 #define SYS_STATS 1 #else #define LINK_STATS 0 #define IP_STATS 0 #define ICMP_STATS 0 #define UDP_STATS 0 #define TCP_STATS 0 #define MEM_STATS 0 #define MEMP_STATS 0 #define PBUF_STATS 0 #define SYS_STATS 0 #endif /* STATS */ #endif /* __LWIPOPTS_H__ */