lwip-contrib-mac/ports/unix/proj/minimal/lwipopts.h
2006-04-19 07:19:38 +00:00

219 lines
7.5 KiB
C

/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__
#define NO_SYS 1
/* #define LWIP_EVENT_API 1 */
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
byte alignment -> define MEM_ALIGNMENT to 2. */
#define MEM_ALIGNMENT 2
/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
#define MEM_SIZE 6000
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 30
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 4
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 2
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 8
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 16
/* The following four are used only with the sequential API and can be
set to 0 if the application only will use the raw API. */
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
#define MEMP_NUM_NETBUF 0
/* MEMP_NUM_NETCONN: the number of struct netconns. */
#define MEMP_NUM_NETCONN 0
/* MEMP_NUM_APIMSG: the number of struct api_msg, used for
communication between the TCP/IP stack and the sequential
programs. */
#define MEMP_NUM_API_MSG 0
/* MEMP_NUM_TCPIPMSG: the number of struct tcpip_msg, which is used
for sequential API communication and incoming packets. Used in
src/api/tcpip.c. */
#define MEMP_NUM_TCPIP_MSG 0
/* MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active
timeouts. */
#define MEMP_NUM_SYS_TIMEOUT 0
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 46
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
#define PBUF_POOL_BUFSIZE 128
/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a
link level header. */
#define PBUF_LINK_HLEN 16
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
#define TCP_TTL 255
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 0
/* TCP Maximum segment size. */
#define TCP_MSS 128
/* TCP sender buffer space (bytes). */
#define TCP_SND_BUF 256
/* TCP sender buffer space (pbufs). This must be at least = 2 *
TCP_SND_BUF/TCP_MSS for things to work. */
#define TCP_SND_QUEUELEN 4 * TCP_SND_BUF/TCP_MSS
/* TCP receive window. */
#define TCP_WND 512
/* Maximum number of retransmissions of data segments. */
#define TCP_MAXRTX 12
/* Maximum number of retransmissions of SYN segments. */
#define TCP_SYNMAXRTX 4
/* ---------- ARP options ---------- */
#define ARP_TABLE_SIZE 10
#define ARP_QUEUEING 0
/* ---------- IP options ---------- */
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
IP packets across network interfaces. If you are going to run lwIP
on a device with only one network interface, define this to 0. */
#define IP_FORWARD 0
/* If defined to 1, IP options are allowed (but ignored). If
defined to 0, all packets with IP options are dropped. */
#define IP_OPTIONS 1
#define IP_REASSEMBLY 1
#define IP_FRAG 1
/* ---------- ICMP options ---------- */
#define ICMP_TTL 255
/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
interfaces. DHCP is not implemented in lwIP 0.5.1, however, so
turning this on does currently not work. */
#define LWIP_DHCP 0
/* 1 if you want to do an ARP check on the offered address
(recommended). */
#define DHCP_DOES_ARP_CHECK 1
/* ---------- UDP options ---------- */
#define LWIP_UDP 1
#define UDP_TTL 255
#define LWIP_RAW 0
/* ---------- Statistics options ---------- */
#define LWIP_STATS 0
#if LWIP_STATS
#define LINK_STATS 0
#define IP_STATS 0
#define ICMP_STATS 0
#define UDP_STATS 0
#define TCP_STATS 0
#define MEM_STATS 1
#define MEMP_STATS 1
#define PBUF_STATS 1
#define SYS_STATS 0
#endif /* LWIP_STATS */
/** print only debug messages with this level or higher */
#define DBG_MIN_LEVEL 0
#define DBG_TYPES_ON (DBG_ON | DBG_TRACE | DBG_STATE | DBG_FRESH)
/**
* Enable/disable debugging per module
*/
#define DEMO_DEBUG DBG_OFF
#define ETHARP_DEBUG DBG_OFF
#define NETIF_DEBUG DBG_OFF
#define PBUF_DEBUG DBG_ON
#define DELIF_DEBUG DBG_OFF
#define DROPIF_DEBUG DBG_OFF
#define TUNIF_DEBUG DBG_OFF
#define UNIXIF_DEBUG DBG_OFF
#define TAPIF_DEBUG DBG_OFF
#define SIO_FIFO_DEBUG DBG_OFF
#define PPP_DEBUG DBG_OFF
#define API_LIB_DEBUG DBG_OFF
#define API_MSG_DEBUG DBG_OFF
#define SOCKETS_DEBUG DBG_OFF
#define ICMP_DEBUG DBG_OFF
#define INET_DEBUG DBG_OFF
#define IP_DEBUG DBG_OFF
#define IP_REASS_DEBUG DBG_OFF
#define MEM_DEBUG DBG_ON
#define MEMP_DEBUG DBG_ON
#define SYS_DEBUG DBG_OFF
#define TCP_DEBUG DBG_ON
#define TCP_INPUT_DEBUG DBG_ON
#define TCP_FR_DEBUG DBG_OFF
#define TCP_RTO_DEBUG DBG_OFF
#define TCP_REXMIT_DEBUG DBG_OFF
#define TCP_CWND_DEBUG DBG_OFF
#define TCP_WND_DEBUG DBG_OFF
#define TCP_OUTPUT_DEBUG DBG_OFF
#define TCP_RST_DEBUG DBG_OFF
#define TCP_QLEN_DEBUG DBG_OFF
#define UDP_DEBUG DBG_OFF
#define TCPIP_DEBUG DBG_OFF
#define TCPDUMP_DEBUG DBG_OFF
#define DHCP_DEBUG DBG_OFF
#endif /* __LWIPOPTS_H__ */