Macintosh-SW/mac-rom-simm-programmer
1
0
Fork 0
mirror of https://github.com/dougg3/mac-rom-simm-programmer.git synced 2025-01-17 21:34:09 +00:00
Code Issues Projects Releases Wiki Activity

Fix some spaces that should have been tabs

Browse Source
This commit is contained in:
Doug Brown 2020-11-26 10:55:15 -08:00 committed by Doug Brown
parent 9e586339dd
commit 39f34d67c4
1 changed files with 57 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

114
hal/at90usb646/parallel_bus.c
View File

@ -132,17 +132,17 @@ void ParallelBus_SetAddress(uint32_t address)
// inputs, this function might mess with their pull-up resistors.
// Only use it under normal operation when all the address pins are being
// used as outputs.
union {
uint32_t addr;
uint8_t addrBytes[4];
} u;
union {
uint32_t addr;
uint8_t addrBytes[4];
} u;
u.addr = address;
u.addr = address;
PORTA = u.addrBytes[0]; // A0-A7
PORTC = u.addrBytes[1]; // A8-A15
// A16-A20 are special because they are split up...(We use PORTD pins 0, 1, 4, 5, 6)
u.addrBytes[2] = (u.addrBytes[2] & 0x03) | (uint8_t)((u.addrBytes[2] & 0x1C) << 2) | (PORTD & 0x8C);
PORTD = u.addrBytes[2];
PORTD = u.addrBytes[2];
}
/** Sets the output data on the 32-bit data bus
@ -158,15 +158,15 @@ void ParallelBus_SetData(uint32_t data)
// function might mess with their pull-up resistors.
// Only use it under normal operation when all the data pins are being
// used as outputs
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.data = data;
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.data = data;
// Doing the AVR registers first makes it so we don't have to use the stack
// (at least according to my testing with avr-gcc)
// Doing the AVR registers first makes it so we don't have to use the stack
// (at least according to my testing with avr-gcc)
PORTE = u.dataBytes[1]; // D16-D23
PORTF = u.dataBytes[0]; // D24-D31
@ -235,15 +235,15 @@ void ParallelBus_SetAddressDir(uint32_t outputs)
*/
void ParallelBus_SetDataDir(uint32_t outputs)
{
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.data = outputs;
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.data = outputs;
// Doing the AVR registers first makes it so we don't have to use the stack
DDRE = u.dataBytes[1]; // D16-D23
// Doing the AVR registers first makes it so we don't have to use the stack
DDRE = u.dataBytes[1]; // D16-D23
DDRF = u.dataBytes[0]; // D24-D31
// D0-D15 are part of the MCP23S17
@ -327,12 +327,12 @@ void ParallelBus_SetDataPullups(uint32_t pullups)
// NOTE: If any pins of PORTE or PORTF are set as outputs, this
// function might mess with their output values.
// Only use it when all the data pins are being used as inputs
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.data = pullups;
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.data = pullups;
PORTE = u.dataBytes[1]; // D16-D23
PORTF = u.dataBytes[0]; // D24-D31
@ -400,11 +400,11 @@ uint32_t ParallelBus_ReadAddress(void)
*/
uint32_t ParallelBus_ReadData(void)
{
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
union {
uint32_t data;
uint16_t dataShorts[2];
uint8_t dataBytes[4];
} u;
u.dataShorts[1] = MCP23S17_ReadInputs(&mcp23s17);
@ -464,17 +464,17 @@ void ParallelBus_WriteCycle(uint32_t address, uint32_t data)
{
// Using this union surprisingly speeds things up when assembling or
// interpreting a uint32_t on the AVR.
union {
uint32_t word;
uint8_t bytes[4];
} u;
union {
uint32_t word;
uint8_t bytes[4];
} u;
// We should currently be in a state of "CS is asserted, OE/WE not asserted".
// As an optimization, operate under that assumption.
// We should currently be in a state of "CS is asserted, OE/WE not asserted".
// As an optimization, operate under that assumption.
// Set address. This is basically the exact same code as ParallelBus_SetAddress,
// but repeated in here so we don't have any function call overhead.
u.word = address;
u.word = address;
PORTA = u.bytes[0];
PORTC = u.bytes[1];
u.bytes[2] = (u.bytes[2] & 0x03) | (uint8_t)((u.bytes[2] & 0x1C) << 2) | (PORTD & 0x8C);
@ -496,7 +496,7 @@ void ParallelBus_WriteCycle(uint32_t address, uint32_t data)
}
// Set data. Bypass the SPI/GPIO drivers again...
u.word = data;
u.word = data;
PORTE = u.bytes[1];
PORTF = u.bytes[0];
AssertControl(MCP_CS_PIN);
@ -526,15 +526,15 @@ uint32_t ParallelBus_ReadCycle(uint32_t address)
{
// Using this union surprisingly speeds things up when assembling or
// interpreting a uint32_t on the AVR.
union {
uint32_t word;
uint8_t bytes[4];
} u;
union {
uint32_t word;
uint8_t bytes[4];
} u;
// We should currently be in a state of "CS is asserted, OE/WE not asserted".
// As an optimization, operate under that assumption.
// We should currently be in a state of "CS is asserted, OE/WE not asserted".
// As an optimization, operate under that assumption.
// If the data pins are set as outputs, change them to inputs
// If the data pins are set as outputs, change them to inputs
if (dataIsOutput)
{
// Set data as inputs. Bypass the SPI/GPIO drivers for this for efficiency.
@ -563,7 +563,7 @@ uint32_t ParallelBus_ReadCycle(uint32_t address)
// Set address. This is basically the exact same code as ParallelBus_SetAddress,
// but repeated in here so we don't have any function call overhead.
u.word = address;
u.word = address;
PORTA = u.bytes[0];
PORTC = u.bytes[1];
u.bytes[2] = (u.bytes[2] & 0x03) | (uint8_t)((u.bytes[2] & 0x1C) << 2) | (PORTD & 0x8C);
@ -603,17 +603,17 @@ uint32_t ParallelBus_ReadCycle(uint32_t address)
*/
void ParallelBus_Read(uint32_t startAddress, uint32_t *buf, uint16_t len)
{
// We should currently be in a state of "CS is asserted, OE/WE not asserted".
// As an optimization, operate under that assumption.
// We should currently be in a state of "CS is asserted, OE/WE not asserted".
// As an optimization, operate under that assumption.
// Using this union surprisingly speeds things up when assembling or
// interpreting a uint32_t on the AVR.
union {
uint32_t word;
uint8_t bytes[4];
} u;
union {
uint32_t word;
uint8_t bytes[4];
} u;
// If the data pins are set as outputs, change them to inputs
// If the data pins are set as outputs, change them to inputs
if (dataIsOutput)
{
// Set data as inputs. Bypass the SPI/GPIO drivers for this for efficiency.
@ -643,7 +643,7 @@ void ParallelBus_Read(uint32_t startAddress, uint32_t *buf, uint16_t len)
{
// Set address. This is basically the exact same code as ParallelBus_SetAddress,
// but repeated in here so we don't have any function call overhead.
u.word = startAddress++;
u.word = startAddress++;
PORTA = u.bytes[0];
PORTC = u.bytes[1];
u.bytes[2] = (u.bytes[2] & 0x03) | (uint8_t)((u.bytes[2] & 0x1C) << 2) | (PORTD & 0x8C);