Firmware for Mac ROM SIMM programmer

Doug Brown 522ded0973 Added .bin file generation for firmware upload		2012-03-04 17:28:15 -08:00
.settings	Fixed bug that screwed up reading after doing an electrical test.	2012-03-04 12:03:02 -08:00
LUFA
tests	Fixed bug that screwed up reading after doing an electrical test.	2012-03-04 12:03:02 -08:00
usb_serial	Tried to do some better commenting in usb_serial.c, also tried to do a better job of documenting the protocol in programmer_protocol.h	2012-01-26 20:42:42 -08:00
.cproject	Added .bin file generation for firmware upload	2012-03-04 17:28:15 -08:00
.gitignore
.project
cdc_device_definition.c	Did some more splitting of responsibilities in the code	2011-12-26 15:02:39 -08:00
cdc_device_definition.h	Did some more splitting of responsibilities in the code	2011-12-26 15:02:39 -08:00
chip_id.h	Started writing more command handling	2011-12-11 08:35:53 -08:00
delay.c
delay.h
Descriptors.c	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
Descriptors.h	Continued playing with USB serial stuff. I think it's working well now, but I'm running into problems reading from the SIMM, so I need to figure out why I'm not getting the data I expect.	2011-12-10 10:35:41 -08:00
external_mem.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
external_mem.h	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
main.c	Tried to do some better commenting in usb_serial.c, also tried to do a better job of documenting the protocol in programmer_protocol.h	2012-01-26 20:42:42 -08:00
mcp23s17.c	Broke out the SPI read/write into a single routine. Less code repetition -- easier to read and smaller.	2011-12-17 13:43:12 -08:00
mcp23s17.h
ports.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
ports.h
programmer_protocol.h	Tried to do some better commenting in usb_serial.c, also tried to do a better job of documenting the protocol in programmer_protocol.h	2012-01-26 20:42:42 -08:00