; ; File: DialogMgrPatches.a ; ; Contains: Various fixes to the Dialog Manager ; ; Written by: Scott Boyd and Kevin MacDonell ; ; Copyright: © 1990-1992 by Apple Computer, Inc., all rights reserved. ; ; Change History (most recent first): ; ; <29> 12/17/92 JSM Fix bug in DialogSelectFixes patch where item hit was not being ; set to -1 (just putting it in D3 isnΥt enough, since we jump ; back into ROM after the point where D3 is stuffed into ; DSItemHit). This code path appears to be rarely taken, so the ; bug probably doesn't show up much (I discovered it just looking ; at the code). ; <28> 6/11/92 JSM Add comments about IIci patches that have been rolled into ; DialogMgr.a: IsDialogEventFixes, DialogSelectFixes, DSEditPatch, ; FixDoAlertToDisposeCIconHandles, FixDoStaticSub, and ; DontPurgeDialogColorTables. ; <27> 6/10/92 JSM Move some routines common to both ROM and System to ; DialogMgrExtensions.a from this file, donΥt define kOSEvent ; here, use osEvt from SysEqu.a instead, change DSEditPatch to ; just jump to the common routine DSEdit in DialogMgrExtensions.a. ; <26> 2/13/92 KSM xxx: #1019549: Fix ROM bind "AfterH2HinDoStatic" re: <23> for ; Plus and SE - off by 4! ; <25> 9/20/91 JSM Fix screwed up and missing comments from revisions past, move ; all ROM binds closer to where they're used. ; <24> 9/19/91 JSM Nuke come-from on _GetCIcon that fixed bug in ; [Could|Free][Alert|Dialog], since these traps are completely ; patched out by this file already. (However, I also rolled the ; patch into DialogMgr.a for no good reason.) ; <23> 8/22/91 KSM DCC,#Bruges: New citation substitution algorithm that fixes both ; the 2-byte problem and the recursive crash. ; <22> 4/5/91 dba gbm, KSM: enable fix to 'actb' and 'dctb' purging ; <21> 3/31/91 dba gbm, #85902: patch the Dialog Manager so actb and dctb resources ; donΥt get purged ; <20> 3/27/91 DC KSM, #85626: Rewrite patches to TEDelete and TEPaste (revision ; 15) ; <19> 3/4/91 dba dty: get rid of SysVers conditionals ; <18> 2/25/91 dba KSM, #dba022505: remove 12 bytes of parameters from ; DialogSelect, instead of 4 (which was wrong) ; <17> 1/14/91 KSM Call StdEntry/StdExit around patches to TEPaste/Delete. ; <16> 1/5/91 fjs (KSM) do not allow non-printing function keys ; <15> 12/7/90 DC Fixed bug in DlgCut, DlgPaste and DlgClear that cuased the ; wrong color and style of text to be drawn into an editText item ; <14> 12/7/90 JSM Move patch on _DisposDialog and come-from patches on ; _GetAuxWin, _DetachResource, and _SetWinColor here from ; PatchIIROM.a; make CouldDialog, FreeDialog, CouldAlert, and ; FreeAlert do nothing for 7.0 and beyond. ; <13> 11/27/90 JSM Move come-from patch on _SetPort inside DrawItem here from ; PatchIIROM.a. ; <12> 11/26/90 JSM Enable come-from patch on _DisposeHandle inside ; CloseDialog for the SE and II (it was already here for the ; Plus), move come-from patch on _ValidRect inside SetIText here ; from Patch[PlusSEII]ROM.a. ; <11> 11/16/90 KSM Fix bug where Stop/Note/Caution Alert call GetCIcon but ; never calls DisposeCIcon. Also fix bug in CouldAD and FreeAD ; where it calls GetCIcon rather than GetResource('cicn') and ; H[No]Purge that handle. ; <10> 11/14/90 JSM Move come-from patch on _TEAutoView to fix destRect here ; from Patch[PlusPortableSE]ROM.a. ; <9> 11/12/90 dba & KSM; get rid of a warning by removing the equate for the ; high-level event number ; <8> 9/24/90 KSM LetΥs return thru the right address in the TEKey patch. ; <7> 8/28/90 DFH Correct capitialiazion of highLongOfPSN and lowLongOfPSN ; <6> 8/17/90 dba move Plus patch to CloseDialog here (come-from on DisposeHandle) ; <5> 8/7/90 KSM Fix bug in DialogSelect patch. Add Cut/Copy/Paste to ; DialogSelect via comefrom on TEKey. ; <4> 7/16/90 stb resynch with process manager, which now uses FSSpecΥs rather ; than filename for GetProcessInfo ; <3> 7/10/90 stb bug fix ; <2> 6/26/90 stb Add patches for IsDialogEvent and DialogSelect to deal with nil ; windows. Also patches to deal with kOSEvents as suspend/resume ; for those apps which don't otherwise get [de]activate events. ; Also patches to ignore high-level events. ; <1> 6/5/90 stb first checked in ; load 'StandardEqu.d' include 'LinkedPatchMacros.a' include 'LayerEqu.a' ; ROM binds used in several patches DialogStdEntry ROMBind (Plus, $14C50), (SE, $0F272), (II, $13CC0), (Portable, $12F78), (IIci, $19D76) ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; The ROM default sound routine for the dialog manager doenΥt preserve a1/d2. ; The fix is to duplicate the code in initDialog till the sound routine is ; set up and then jump to rom to continue with the rest of InitDialog. ; ; This patch has been rolled into DialogMgr.a. ; ROMInitDialogContinue ROMBind (Plus, $148CC), (SE, $0EEEE), (II, $13852), (Portable, $12BEA), (IIci, $198E4) FixSoundInDialog PatchProc _InitDialogs,(Plus,SE,II,Portable,IIci) jsrrom DialogStdEntry ; duplicate the rom code. MOVE.L 8(A6), ResumeProc ; Get restartProc pointer to save CLR.W ACount ; Say starting with 0 for count ST ANumber ; some bogus ANumber LEA DABeeper,A0 ; clear the string handles LEA myZounds,A1 ; point to default sound routine jmprom ROMInitDialogContinue ; finish the rest of this routine in rom. ;-------------- ; myZounds: Default sound proc ; ; 0(sp) (long) return address ; 4(sp) (word) number of beeps myZounds tst.w 4(sp) ; check parameter passed in beq.s @exit ; see if number of beeps is zero @Loop move #3,-(sp) ; decent beep tone _SysBeep ; move #6,A0 ; delay 1/10 second _Delay ; sub.w #1,4(sp) ; any more beeps? bne.s @Loop ; @exit move.l (sp)+,A0 ; get return address add.w #2,sp ; ... pop off parameter jmp (A0) ; ... and return EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; IsDialogEvent no-windows fix. ; With this patch, IsDialogEvent returns FALSE rather than looking at low memory if there is no ; window (FrontWindow returns NIL). ; ; kHighLevelEvent fix. ; High-level events are not dialog events. They will be ignored. ; ; app4 (osEvt) fix. ; Return false if the event is an app4 event and not a suspend or resume event. ; ; IsDialogEvent suspend/resume for doOwnActivate process fix. ; This will treat a suspend/resume as an activate/deactivate if the process ; is set for for doOwnActivate. ; ; Registers Used ; -------------- ; a2 gets and holds the address of the event record ; a4 gets the dialog window (if any) from ClaimEvent ; d3 trashed ; ; This patch has been rolled into DialogMgr.a. ; ROMIsDiaClaimEvent ROMBind (Plus, $14B48), (SE, $0F16A), (II, $13B98), (Portable, $12E6C), (IIci, $19C4E) IsDiaNotDlgExit ROMBind (Plus, $14B96), (SE, $0F1B8), (II, $13BE6), (Portable, $12EBA), (IIci, $19C9C) IsDiaAfterClaimEvent ROMBind (Plus, $14B6E), (SE, $0F190), (II, $13BBE), (Portable, $12E92), (IIci, $19C74) IsDialogEventFixes PatchProc _IsDialogEvent,(Plus,SE,II,Portable,IIci) IsDiaRtnAddress EQU 4 ; EventDialog return address IsDiaEvent EQU IsDiaRtnAddress+4 ; in event IsDiaResult EQU IsDiaEvent+4 ; function result IMPORT NotOwnActivator IMPORT FakeUpEvent jsrrom DialogStdEntry ; duplicate the rom code, preserve a2-a4/d3-d7 ; check if this is a dialog event clr.w IsDiaResult(a6) ; assume failure move.l IsDiaEvent(a6),a2 ; get the event pointer jsrrom ROMIsDiaClaimEvent ; now A4 points to dialog window move.l a4,d3 ; test result beq.s @NotValid ; no window; not a dialog event exit through ROM ; Is this a kHighLevelEvent? move.w EvtNum(a2),d3 cmpi.w #kHighLevelEvent,d3 ; is this a high-level event? beq.s @NotValid ; if so, it's not a dialog event! ; Is this a osEvt? cmpi.w #osEvt,d3 ; is this a suspend/resume/mouse-moved/app-died event? bne.s @Valid ; we're still here? must be ok (unless we forgot something). ; Is this a suspend or resume? cmpi.b #1,evtMessage(a2) ; high-order byte holds type of event, 1 => suspend/resume bne.s @NotValid ; it's not, so it's some other osEvt, return FALSE ; Check to see if this process requires its own activate event. ; If it is, fake [de]activate event on the stack. jsr NotOwnActivator beq.s @NotValid ; Doesn't require own activate event, so get out jsr FakeUpEvent ; Build a fake event on the stack, make room for a short ; result, and push the event record address _IsDialogEvent ; Find out whether this one qualifies as a dialog event move.w (sp)+,IsDiaResult(a6) ; pop the result add.w #evtBlkSize,sp ; pop the event record ; Unlink A6, restore regs, pop D0 byte for parameters. movem.l (sp)+,a2-a4/d3-d7 ; Restore regs unlk a6 move.l (sp)+,(sp) ; Pop off 4 bytes of parameters (wierd idiom) rts ; return @Valid jmprom IsDiaAfterClaimEvent ; rejoin the ROM @NotValid jmprom IsDiaNotDlgExit ; not a dialog event; exit through ROM EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; DialogSelect no-windows fix. ; With this patch, DialogSelect returns FALSE rather than looking at low memory ; when FrontWindow returns NIL. ; ; DialogSelect suspend/resume for doOwnActivate process fix. ; This will treat a suspend/resume as an activate/deactivate if the process is set for ; for doOwnActivate. It clones the event onto the stack and calls DialogSelect again. ; Everyone in the patch chain gets a crack at the new event. ; ; Registers Used ; -------------- ; a2 gets and holds the address of the event record ; a4 gets the dialog window (if any) ; d3 trashed ; ; This patch has been rolled into DialogMgr.a. ; DSAfterClaimEvent ROMBind (Plus, $14BAE), (SE, $0F1D0), (II, $13C00), (Portable, $12ED4), (IIci, $19CB6) DSNotMineExit ROMBind (Plus, $14BD6), (SE, $0F1F8), (II, $13C28), (Portable, $12EFC), (IIci, $19CDE) DialogSelectFixes PatchProc _DialogSelect,(Plus,SE,II,Portable,IIci) DSRetAddr EQU 4 ; EventDialog return address DSItemHit EQU DSRetAddr+4 ; item clicked on DSWindow EQU DSItemHit+4 ; returned dialog wondow VAR DSEvent EQU DSWindow+4 ; in/out event DSResult EQU DSEvent+4 ; function result IMPORT NotOwnActivator IMPORT FakeUpEvent jsrrom DialogStdEntry ; duplicate the rom code, preserve a2-a4/d3-d7 ; check if this is a dialog event clr.w DSResult(a6) ; Set return boolean, assume failure movea.l DSWindow(a6), a3 ; Get VAR address of dialog pointer clr.l (a3) ; Set to NIL, assuming failure movea.l DSEvent(A6), a2 ; Check event classification and get dialog ptr jsrrom ROMIsDiaClaimEvent ; now A4 points to dialog window move.l a4,d3 ; test result beq.s @NotValid ; no window; not a dialog event exit through ROM ; Is this a osEvt? move.w EvtNum(a2),d3 cmpi.w #osEvt,d3 ; is this a suspend/resume/mouse-moved/app-died event? bne.s @Valid ; we're still here? must be ok (unless we forgot something). ; Is this a suspend or resume? cmpi.b #1,evtMessage(a2) ; high-order byte holds type of event, 1 => suspend/resume bne.s @NotValid ; it's not, so it's some other osEvt, return FALSE ; Check to see if this process requires its own activate event. ; If it is, fake [de]activate event on the stack. jsr NotOwnActivator beq.s @NotValid ; Doesn't require own activate event, so get out jsr FakeUpEvent ; Build a fake event on the stack, make room for a short ; result, and push the event record address move.l DSWindow(a6),-(sp) ; VAR dialogPtr move.l DSItemHit(a6),-(sp) ; VAR itemHit _DialogSelect ; Try again with new event record move.w (sp)+,DSResult(a6) ; pop the result add.w #evtBlkSize,sp ; pop the event record ; Unlink A6, restore regs, pop D0 byte for parameters. movem.l (sp)+,a2-a4/d3-d7 ; Restore regs unlk a6 move.l (sp)+,a0 ; get the return address <18> lea 12(sp),sp ; deallocate 12 bytes of parameters <18> jmp (a0) ; return <18> @Valid jmprom DSAfterClaimEvent ; rejoin the ROM @NotValid moveq #-1,d3 move.l DSItemHit(a6), a0 ; get VAR address of userΥs item <29> move.w d3, (a0) ; Save item number hit <29> jmprom DSNotMineExit ; not a dialog event; exit through ROM EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Come-from patch on _TEKey inside DBKeyDown ; ; This patch adds support for cut/copy/paste to _DialogSelect. Calls DSEdit in DialogMgrExtensions.a. ; ; This patch has been rolled into DialogMgr.a. ; TEKeyFromEventAD ROMBind (Plus, $1537A), (SE, $0F9A8), (II, $1454A), (Portable, $136DA), (IIci, $1A656) DSEditPatch ComeFromPatchProc _TEKey,TEKeyFromEventAD,(Plus,SE,II,Portable,IIci) import DSEdit jmp DSEdit EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Come-from patch on _DisposeHandle inside CloseDialog ; ; What used to happen: ; GetNewDialog and NewDialog did a TENew to create a "floating" TextEdit record to share ; amongst all editable text items. It threw away the created hText handle and shuttled ; handles to the various text items cloned from the item list. When CloseDialog came ; around, because hText would be disposed, it was decided to directly dispose the TEHandle ; rather than call TEDispose. This was fine when the only handle TENew created aside from ; the TERecord itself was for text. ; What happens now: ; TextEdit creates at least one additional record now. Set up a NIL for hText, then ; call TEDispose to do the right thing. AfterDisposeHandleInCloseDialog ROMBind (Plus, $14CC0), (SE, $0F2E2), (II, $13D46) CloseDialogTextEditPatch ComeFromPatchProc _DisposeHandle,AfterDisposeHandleInCloseDialog,(Plus,SE,II) ; <12> Move.L A0,-(SP) ; pass TEHandle to TEDispose Move.L (A0),A0 ; Dereference TEHandle Clr.L teTextH(A0) ; Stuff fake text handle _TEDispose ; (TEHandle is still on stack!) Rts ; back to caller EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Come-from patch on _TEAutoView inside SetNewEdit <10> ; ; This patch fixes a bug in the Dialog Manager that occurs with right ; justified text. The destRect allocated for TextEdit items in dialogs ; is made twice as wide as the dialog item bounding rectangle. This puts ; right justified text outside the bounding rectangle, where the user just ; can't see it. (No matter how hard he tries.) ; AfterTEAutoViewInSetNewEdit ROMBind (Plus, $154D2), (SE, $0FB00), (Portable, $1383C) SetNewEditTEAutoView ComeFromPatchProc _TEAutoView,AfterTEAutoViewInSetNewEdit,(Plus,SE,Portable) ; d0, d1 & a0 are set upon entry here by the Dialog Manager ; Turn the autoscroll off always! tst.w teSysJust ; teSysJust set? <21Nov86 jdt> beqOld ; no -> bail out. <21Nov86 jdt> ; We want to detect when the box is doubled in width, and reverse it. ; (a0) is teDestRect.right. ; a0 is the teRect. ; d0 is the adjusted top (for comparison with the bottom). cmp.w -2(a0),d0 ; repeat rom test. bltOld ; no fix necessary. add.w d1,(a0) ; fix right (d1 is negative). jmpOld ; continue EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; FixDoAlertToDisposeCIconHandles ; Note/Caution/Stop ALERT all call GetCIcon, then PlotCIcon, but never do they dispose the handle. ; This patches that PlotCIcon to follow with a DisposeCIcon. ; ; This patch has been rolled into DialogMgr.a. ; AfterPlotCIconInDoAlert ROMBind (II, $139B2), (IIci, $19A48) FixDoAlertToDisposeCIconHandles ComeFromPatchProc _PlotCIcon,AfterPlotCIconInDoAlert,(II,IIci) move.l 8(SP),4(SP) ; Move the rect over the CIconHandle move.l D0,(SP) ; Put the CIconHandle over the return addr move.l D0,8(SP) ; Put a CIconHandle under these for Dispose call jsrOld ; Go do the PlotCIcon _DisposeCIcon ; Nuke the CIconHandle jmpROM AfterPlotCIconInDoAlert EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Come-from patch on _ValidRect inside SetIText <12> ; ; SetIText calls a utility routine, DrawItem, which clobbers D6 even though D6 has a ; handle which will be referenced later. This patch restores the register. AfterValidRectInSetIText ROMBind (Plus, $14F26), (SE, $0F556), (II, $14034) SetITextValidRect ComeFromPatchProc _ValidRect,AfterValidRectInSetIText,(Plus,SE,II) move.l 12(A6),D6 ; set up clobbered register jmpOld ; continue EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Come-from patch on _SetPort inside DrawItem <13> ; ; The port, text attributes and colors are only restored if the color item list exists. ; This patch preceeds the GNEFilter SetPort patch. AfterRestoreSetPortInDrawItem ROMBind (II, $1438A) DrawItemSetPort ComeFromPatchProc _SetPort,AfterRestoreSetPortInDrawItem,(II) SUBQ #2+4,SP ; make room for boolean result and color table handle MOVE.L A4,-(SP) ; pointer to dialog window PEA 4+2(SP) ; point to room for color table _GetAuxWin ADDQ #2,SP ; ignore boolean result MOVE.L (SP)+,D0 ; is there an AuxWinRecord? BEQ.S SkipIt ; if not, do nothing MOVE.L D0,A0 ; get the handle MOVE.L (A0),A0 ; point to the data TST.L dialogCItem(A0) ; is there a color ditl? bneOld ; make the SetPort call SkipIt addq #8,sp ; get rid of port parameter, and SetPort return address rts ; return, but not to the caller! skip the restore stuff EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Dispose 'ictb' in DisposDialog, not CloseDialog, on Mac II <14> ; ; Originally patch PB195 written on 09jul87. ; ; This pair of patches to _DisposDialog and _GetAuxWin causes the 'ictb' to be thrown away ; in response to DisposDialog instead of CloseDialog on a Mac II. DisposDialogFix PatchProc _DisposDialog,(II) SUBQ #6,SP ; boolean result from GetAuxWin, handle MOVE.L 10(SP),-(SP) ; window for GetAuxWin PEA 6(SP) ; handle for GetAuxWin _GetAuxWin ADDQ #2,SP ; donΥt care if it is the default MOVE.L (SP)+,A0 ; get the aux handle MOVE.L (A0),A0 ; dereference MOVE.L dialogCItem(A0),D0 ; use the reserved field for ditl BEQ.S @noDitl MOVE.L D0,A0 _DisposHandle @noDitl jmpOld ; do old DisposDialog EndProc AfterGetAuxWinInCloseDialog ROMBind (II, $13D30) AtNoDITLInCloseDialog ROMBind (II, $13D40) NoIctbDisposeInCloseDialog ComeFromPatchProc _GetAuxWin,AfterGetAuxWinInCloseDialog,(II) ADD #18,SP ; remove parameters, return addr, and boolean and handle jmpROM AtNoDITLInCloseDialog ; and go around ROM code that disposes 'ictb' EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Duplicate 'dctb' and 'actb' on Mac II <15> ; ; Originally patch PB195 written on 09jul87. ; ; This pair of come-from patches to _DetachResource and _SetWinColor causes the 'actb' or 'dctb' ; to be duplicated if called by GetNewDialog or an alert call; it is never detached. SetWinColor ; allows color tables to specify that the window should use the default color table if ctSize is ; -1. In this case, it doesn't use the handle passed in at all, so we don't need to copy it. If ; we did copy it, it would never be thrown away later on. AfterDetachResourceInDoColor ROMBind (II, $13E6E) NoDetachResourceInDoColor ComeFromPatchProc _DetachResource,AfterDetachResourceInDoColor,(II) MOVE.L (SP)+,(SP) ; don't detach 'actb' or 'dctb' RTS EndProc AfterSetWinColorInGotStorage ROMBind (II, $13B26) DuplicateColorTableInNewDialog ComeFromPatchProc _SetWinColor,AfterSetWinColorInGotStorage,(II) MOVE.L 4(SP),A0 ; get the window color table MOVE.L (A0),A1 ; dereference CMP.W #-1,ctSize(A1) ; use default window colors? beqOld ; if so, no need to duplicate _HandToHand ; make copy for window manager MOVE.L A0,4(SP) ; and save for call to SetWinColor jmpOld EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Patch out CouldDialog, FreeDialog, CouldAlert, and FreeAlert <14> ; ; Under 7.0, these calls work even more poorly than they do under 6.0. So, with the goal of ; making them completely obsolete in the future, we'll make them do nothing. MakePatch CleanupTwoBytes,_CouldDialog,(Plus,SE,II,Portable,IIci) MakePatch CleanupTwoBytes,_FreeDialog,(Plus,SE,II,Portable,IIci) MakePatch CleanupTwoBytes,_CouldAlert,(Plus,SE,II,Portable,IIci) MakePatch CleanupTwoBytes,_FreeAlert,(Plus,SE,II,Portable,IIci) CleanupTwoBytes Proc Export move.l (sp)+,a0 ; get return address addq #2,sp ; remove dialogID parameter jmp (a0) ; and return EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; patches on TEDelete and TEPaste <20> ; ; When any text operation is performed on a color dialog with an 'ictb', it sets up the dialogΥs ; grafPort with the appropriate font and color information before and restores after. Since DlgPaste, ; DlgClear and DlgCut are glue, and were not revised for System 4, they do not do the appropriate set up ; and restore required for changing an EditText item. Even if they were rewritten, existing applications ; would not be fixed. Since DlgClear, DlgCut and DlgPaste call only TEPaste and TEClear, we patch these ; to routines to decide whether the TEHandle passed to them is the TEHandle used by a color dialog for ; its EditText items, and if so perform the necessary dialog manager operations to support any ; ictb entries associated with these items. FixTEPaste PatchProc _TEPaste,(II,IIci) Import IsDialogEdit Import SetUpDialog Import RestoreDialog MOVEA.L 4(SP), A0 ; Get TEHandle into A0 for call to IsDialogEdit JSR IsDialogEdit ; decide whether to call setup and restore TE beqOld ; do the inherited behavior, OtherwiseΙ jsrrom DialogStdEntry ; Set up standard Dialog Manager stack frame for SetUpDialog JSR SetUpDialog ; Performs set up for TextEdit operations on Color Dialogs MOVE.L 8(A6), -(SP) ; repush the TEHandle jsrold ; call the old routine JMP RestoreDialog ; execute clean-up code and jump to return code EndProc ; This patch fixes TECut as well because TECut calls TECopy and then TEDelete FixTEDelete PatchProc _TEDelete,(II,IIci) Import IsDialogEdit Import SetUpDialog Import RestoreDialog MOVEA.L 4(SP), A0 ; Get TEHandle into A0 for call to IsDialogEdit JSR IsDialogEdit ; decide whether to call setup and restore TE beqOld ; do the inherited behavior, OtherwiseΙ jsrrom DialogStdEntry ; Set up standard Dialog Manager stack frame for SetUpDialog JSR SetUpDialog ; Performs set up for TextEdit operations on Color Dialogs MOVE.L 8(A6), -(SP) ; repush the TEHandle jsrold ; call the old routine JMP RestoreDialog ; execute clean-up code and jump to return code EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; SetUpDialog <20> ; ; Calls Dialog Manager ROM routines BeginInWind and SetUpText which set thePort to the color dialog and ; sets the font and color of thePort to whatever is specified in the ictb (if there is any ictb). SetUpText ROMBind (II, $146F8), (IIci, $1A804) BeginInWind ROMBind (II, $13D62), (IIci, $19E14) SetUpDialog Proc Export MOVEA.L 8(A6), A0 ; Get the TEHandle (frame set up by DialogStdEntry) MOVEA.L (A0), A0 ; get the TEPtr MOVEA.L teGrafPort(A0), A4 ; get the grafPtr/DialogPtr jsrrom BeginInWind ; set thePort appropriately and put the editField value in D3 jsrrom SetUpText ; set up the dialog's pen color and text font for the ictb entry RTS EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; RestoreDialog <20> ; ; Calls Dialog Manager ROM routines RestoreTE and EndInWind to restore the dialog to its previous ; font and color state and to restore thePort to its previous value. We then call DialogStdExit ; to clear up the standard frame, pop off our parameters and return RestoreTE ROMBind (II, $14810), (IIci, $1A91C) EndInWind ROMBind (II, $13DA0), (IIci, $19DC2) DialogStdExit ROMBind (II, $13CCC), (IIci, $19D82) RestoreDialog Proc Export jsrrom RestoreTE ; call the dialog manager "cleanup-after-text-update" routine jsrrom EndInWind ; restore thePort MOVEQ #4, D0 ; Set D0 to size of the handle passed to TEDelete/TEPaste (for DialogStdExt) jmprom DialogStdExit ; clean up after RomStdEntry EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; IsDialogEdit <20> ; ; Takes a TEHandle in A0 and decides whether it is the TEHandle used by a Color Dialog for its EditText ; items. IsDialogEdit Proc Export Import IsColorDialog MOVE.L A0, D0 ; Test the TEHandle BEQ.S NotADialogWindow ; If it's NULL, it isn't any kind of window MOVEA.L (A0), A0 ; Get the TEPtr MOVE.L D0, -(SP) ; save the TEHandle for after IsColorDialog SUBQ #2, SP ; Set up for return value from IsDialogWindow MOVE.L teGrafPort(A0), -(SP) ; Push the TEHandle grafPtr JSR IsColorDialog ; Check the TEHandle's grafport to see if is a dialogptr MOVE.B (SP)+, D0 ; Store result in D0 MOVEA.L (SP)+, A1 ; recover TEHandle BEQ.S NotADialogWindow ; if this is not a color dialog, we're done checking MOVE.L (A1), A0 ; Get the TEPtr MOVE.L teGrafPort(A0), A0 ; Get the TEHandle's grafPtr (a DialogPeek) CMPA.L teHandle(A0), A1 ; Is our TEHandle the same as the Dialog's? SEQ D0 ; Set to ones if equal, clears otherwise NotADialogWindow TST.B D0 ; Set condition codes RTS EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; pascal Boolean IsColorDialog(GrafPtr thePort); <15> ; FUNCTION IsColorDialog(thePort: GrafPtr): BOOLEAN; ; ; IsColorDialog returns whether thePort is a COLOR window of dialogKind. IsColorDialog Proc Export MOVE.L 4(SP), A0 ; get the TEHandle's GrafPtr SUBQ #2, SP ; make room for call to EachWindow MOVEQ #firstWindow, D0 ; start our iteration at the first window in the layer MOVE.L D0, -(SP) CLR.L -(SP) ; finish after the last window in the layer CLR.L -(SP) ; use the current layer for the iteration PEA FindOurPort ; push the action proc MOVE.L A0, -(SP) ; Push the current port _EachWindow ; call the iterator CLR.W D1 ; clear D1 to use as a boolean return value TST.W (SP)+ ; check the return value, 0 or -1 - not a dialog SGT D1 ; set the low byte to be true or false appropriately MOVEA.L (SP)+, A0 ; Get the return address ADDQ #4, SP ; Pop the parameters MOVE.B D1, (SP) ; put the return result on the stack JMP (A0) ; return FindOurPort MOVE.L 4(SP), A0 ; Get the port to be tested MOVE.L 12(SP), A1 ; Get the window to test against CMPA.L A0, A1 ; Have we found ourselves yet? BNE.S KeepGoing ; No, keep looking TST.W portBits+rowBytes(A0) ; Check to see if this is a color window BGT.S NotADialog ; No, we're done checking and our window isn't color MOVE.W windowKind(A0), D0 ; Yes, lets see if we're a dialog, shall we? CMPI.W #dialogKind, D0 ; Is it a dialogΙ BNE.S NotADialog ; No, we're done checking and we don't hava a dialog MOVEQ #1, D1 ; set the return value and leave BRA.S Leave NotADialog MOVEQ #-1, D1 ; Set the return value to a number to stop iteratingΙ BRA.S Leave ; make it a negative number to indicate not a dialog KeepGoing CLR.W D1 ; indicate no result and continue Leave MOVE.L (SP)+, A0 LEA 12(SP), SP ; pop the parameters MOVE.W D1, (SP) ; leave the return value JMP (A0) ; return EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; FixDoStaticSub <23> ; ; DoStatic scans the static text string looking for carets to decide if it needs to do any ParamText ; string substitutions. If the font is a double-byte font, this will not work since the caret can ; be the second byte of a double-byte character. Hence, the wrong substitution is made. ; ; NOTE: This patch was put onto _HandToHand rather than the closer _GetHandleSize as a ; performance consideration. GetHandleSize is called significantly more often thus ; patching it is suboptimal versus adding the few extra lines of code to patch _H2H. ; ; This patch has been rolled into DialogMgr.a. ; AfterH2HinDoStatic ROMBind (Plus,$15268),(SE,$0F898),(II,$14400),(IIci,$1A4FC),(Portable,$135B6) ROMskipParam ROMBind (Plus,$15286),(SE,$0F8B6),(II,$14422),(IIci,$1A51E),(Portable,$135D8) FixDoStaticSub ComeFromAfterPatchProc _HandToHand,AfterH2HinDoStatic,(Plus,SE,II,IIci,Portable) MOVE.L A0,A2 ; save handle in A2 TST.B D6 ; is it an edit text item? beqROM ROMskipParam ; if so, donΥt substitute carets MOVE.L A2,-(SP) ; Push the string handle IMPORT ReplaceCitations JSR ReplaceCitations ; Use the new, cool citation replacement algorithm jmpROM ROMskipParam ; And rejoin the ROM as if no citations need to be done EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ ; Come-from patch on _GetResource inside doColorStuff ; ; DonΥt purge 'actb' and 'dctb' color tables for alerts and dialogs. ; ; This patch has been rolled into DialogMgr.a. ; AfterGetResourceInDoColor ROMBind (II,$13E60),(IIci,$19F2E) DontPurgeDialogColorTables ComeFromAfterPatchProc _GetResource,AfterGetResourceInDoColor,(II,IIci) move.l (sp),a0 ; get the result handle _HNoPurge ; call HNoPurge on it (even if it is NIL) RejoinROM EndProc ;ΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡΡ END