;
;	File:		TimDriver.a
;
;	Contains:	This file contains the video driver for use by the Macintosh
;				OS for the Jaws (TIM) hardware.
;
;	Written by: David A. Fung/Mike Puckett
;
;	Copyright:	© 1990-91 by Apple Computer, Inc.  All rights reserved.
;
;	Change History (most recent first):
;
;	   <SM3>	 11/5/92	SWC		Changed VideoEqu.a->Video.a and ShutdownEqu.a->Shutdown.a.
;	   <SM2>	 11/2/92	kc		Don't include SonicEqu.a.
;		 <1>	 10/6/92	GDW		New location for ROMLink tool.
;	   <SM4>	09-03-92	jmp		(jmp,H2) Corrected .s vs. non-.s branches and odd-alignment
;									problems.
;		 <1>	 3/30/92	JSM		first checked in
;		<10>	 6/10/91	djw		Add NeedsGoodBye Kiss csCode to Control, to close driver
;		 <9>	  6/5/91	jmp		In VidOpen, I now try to re-open the Backlight driver, because
;									it might have been closed.  In VidClose, I now close the
;									Backlight driver and gray the screen; this is to support a new &
;									improved method of restarting and shutting donw the system
;									(i.e., to prevent desktop persistence on restart).
;		 <8>	 5/22/91	jmp		Code Review changes:  For consistency, did a StripAddress on
;									VidOpenÕs copy of the privates; eliminated the redundant clears
;									and checks for the the driver copy of the fixed-entry clut; and
;									replaced #0Õs with #noErrÕs where appropriate.
;		 <7>	 5/15/91	jmp		SetInterrupt wasnÕt checking the input value (supposed to be
;									either 0 or 1), but instead was just looking at D0; so, it would
;									either enable (0) or disable (1), depending on whether D0.w was
;									non-zero or not.  GetInterrupt returned -1.w (instead of 1.b)
;									for  the disabled state, so some test tools were getting
;									confused; so, I now just return 1.b when interrupts are
;									disabled.
;		 <6>	 5/10/91	jmp		Made the GrayScreen code more universal (for things like
;									DB-Lite) by swapping into 32-bit mode prior to accessing the
;									framebuffer.
;		 <5>	 5/10/91	jmp		Fixed a bug in GetEntries where A0 was not loaded properly.
;									Made GetEntries 32-bit clean.  GetEntries was trashing A1, so
;									async calls were failing (i.e., jumping thru IODone requires A1
;									to be pointing to the AuxDCE).  Indexed GetEntries didnÕt work
;									at because I was checking for index vs. sequential off A3
;									instead of A2!  Made the Control & Status dispatchers 32-bit
;									clean.  SaveMode was never being set up!  From the code review:
;									Changed the TimeMgr task to micro-second base and fixed
;									frequency at approximately 60.15Hz; eliminated SetEntries &
;									SetDefaultMode and fixed GetDefaultMode.
;		 <4>	 4/17/91	jmp		Updated various comments, and cleaned up the fixed-device
;									support.
;		 <3>	 4/15/91	djw		Fix trashed register bug in interrupt handler, Enabled fixed
;									depth code in Open.
;		 <2>	 2/15/91	jmp		Started looking into making TIM a fixed device, but need to get
;									working properly -- commented out for now.  Also, need to look
;									at VidClose for last VBL problem.
;		 <1>	 12/8/90	HJR		First time for Terror.
;		 <3>	 9/13/90	MSH		Waimea is gone, long live TIM
;		 <2>	 4/19/90	DAF		Correct header (I almost got it right...)
;		 <1>	 4/19/90	DAF		Added WaimeaDriver.a for the first time
;
;-------------------------------------------------------------------
;	Mod History :
;
;	17Apr90 	DAF		New today (spawned from ElsieDriver.a)
;
;-------------------------------------------------------------------


				STRING 	C

				PRINT	OFF
				LOAD	'StandardEqu.d'

				INCLUDE 'DockingEqu.a'
				INCLUDE	'EgretEqu.a'
				INCLUDE	'GestaltEqu.a'
				INCLUDE	'GestaltPrivateEqu.a'
				INCLUDE 'HardwarePrivateEqu.a'
				INCLUDE	'IOPrimitiveEqu.a'
				INCLUDE	'PowerPrivEqu.a'
				INCLUDE 'ROMEqu.a'
				INCLUDE	'Video.a'
				INCLUDE	'SlotMgrEqu.a'
				INCLUDE	'ShutDown.a'
;				INCLUDE	'SonicEqu.a'
				INCLUDE	'UniversalEqu.a'
				
				INCLUDE	'DepVideoEqu.a'
				PRINT	ON

				SEG		'_sTimDriver'

					BLANKS		ON
					STRING		ASIS
					MACHINE		MC68020

kTIMVBLTime			EQU			-16626		; 60.14742 Hz using the microsecond timer.

; This is device storage which is stored in the dCtlStorage field of the AuxDCE.

TIMVidPrivates		RECORD		0
saveBaseAddr 		DS.L		1			; the screen base address
saveFixedCLUT		DS.L		1			; pointer to fixed-entry CLUT
saveNumFixedEntries	DS.W		1			; number of entries in fixed CLUT (zero based)
saveMode			DS.W		1			; the current mode setting
GFlags				DS.W		1			; flags word
TTask				DS.B		tmXQSize	; extended time manager task block
IntDisableFlag		DS.W		1			; this word is non-zero when the VBL interrupt
											; 	simulator is disabled
TIMVidPrivSize		EQU			*
					ENDR
					
LTimDriver		MAIN	EXPORT
;-------------------------------------------------------------------
;	Video Driver Header
;-------------------------------------------------------------------
;
TIMDrvr		DC.W	$5C00					; ctl,status,needsLock,needsGoodBye
			DC.W	0,0,0					; not an ornament

; Entry point offset table

			DC.W	TIMVidOpen-TIMDrvr 		; open routine
			DC.W	TIMDrvr-TIMDrvr			; no prime
			DC.W	TIMVidCtl-TIMDrvr		; control
			DC.W	TIMVidStatus-TIMDrvr	; status
			DC.W	TIMVidClose-TIMDrvr		; close

			STRING	Pascal
TIMVidTitle	DC.B	'.Display_Video_Apple_TIM'		
			STRING	ASIS
			ALIGN	2						; make sure we're word aligned
			DC.W	CurTimDrvrVersion		; version
			
;
; According to CARDS & DRIVERS, video drivers are supposed to shut off
;	video at close time Òto avoid the persistence of the desktop
;	during reboots.Ó  Since we canÕt really turn TIMÕs video off,
;	we must simulate it by turning off the backlighting and writing
;	white (because itÕs an LCD screen) to the frame buffer.  Also,
;	because the video driver might be closed and then re-opened
;	prior to a reboot (AUX?), we must always re-open the backlight
;	driver in the video driverÕs open routine.  And, for this reason,
;	when we close the backlight driver, we do NOT remove itÕs DCE,
;	and do we donÕt dispose of the driver.  NOTE:  On the first
;	time thru (i.e., after startup or restart), the Backlight driver
;	will not have been installed yet, so our attempting to open it
;	in our open routine will fail, which is okay.  This may change
;	in the future.
;

			String	Pascal
TIMBackLite	Dc.b	'.Backlight'			; Name of Backlight Driver for TIM.
			String	Asis
			Align	2
			
**********************************************************************
*
* TIMVidOpen allocates private storage for the device in the AuxDCE and locks
*	it down for perpetuity. Also, install the simulated interrupt handler and 
*	start it going.
*
* Entry:	A0 = param block pointer
*			A1 = AuxDCE pointer
*
* Locals:	A3 = pointer to private storage
*
**********************************************************************

			WITH	VDPageInfo,TIMVidPrivates,spBlock

TIMVidOpen	
		
;
; Allocate private storage (since block is CLEAR, GFlags are zeroed) and get
;	a pointer to it in A3.
;

			MOVEQ	#TIMVidPrivSize,D0			; get size of parameters
			_ResrvMem  ,SYS 					; make room as low as possible
			MOVEQ	#TIMVidPrivSize,D0			; get size of parameters
			_NewHandle ,SYS,CLEAR				; get some memory for private storage
			BNE  	@OpError1					; => return an error in open
			MOVE.L	A0,dCtlStorage(A1)			; save returned handle in AuxDCE
			_HLock								; and lock it down forever (this includes a Time Mgr QElem)
			MOVE.L	(A0),A3						; get a pointer to it
			
			MOVE.L	(A0),D0						; Get a 32-bit clean pointer
			_StripAddress						;	to our privates into A3.
			Move.l	D0,A3
			
			MOVE.L	dCtlDevBase(A1),saveBaseAddr(A3) ; save the screen base address

;
; TIM doesn't have a normal slot interrupt handler since the LCD doesn't really interrupt!  We simulate
;	the interrupt with a timer task that goes off at 60.14742 Hz.

			LEA		TIMBeginIH,A0				; get a pointer to the interrupt simulation timer task code
			MOVE.L	A0,tmAddr+TTask(A3)			; put it in the time task
			LEA		TTask(A3),A0				; get a pointer to the timer queue element
			Move.l	#'eada',(A0)				; Put in the magic signature to prevent VM from deferring us.
			_InsXTime							; Install the task (fixed frequency).

; Note that IntDisableFlag is clear from the NewHandle above which ÒenablesÓ the interrupt.

			BSR		TIMEnableVGuts				; turn on and prime the interrupt simulator
			
; For doing GetEntries, we need to get our fixed-entry CLUT from the Slot Manager.
;
			With	spBlock

			Suba	#spBlockSize,Sp				; Make an SpBlock on the stack and
			Move.l	Sp,A0						;	get a pointer to it in A0.
			
			Move.b	dCtlSlot(A1),spSlot(A0)		; Get the slotnumber.
			Move.b	dCtlSlotID(A1),spID(A0)		; Get the spID of video sRsrc.
			Clr.b	spExtDev(A0)				;
			_sRsrcInfo							; Try to get the spsPointer.
			Bne.s	@OpError2					; WeÕre dead if this fails.
			
			Move.b	#firstVidMode,spID(A0)		; Look for our mode entry.
			_sFindStruct						; If we donÕt find it, then
			Bne.s	@OpError2					;	weÕre dead.
			
			Move.b	#mTable,spID(A0)			; Get our fixed-entry CLUT.
			 _sGetBlock							; If we donÕt get it, then
			Bne.s	@OpError2					;	weÕre dead.
			
			Move.l	spResult(A0),A0				; Get ptr to fixed-entry CLUT
			Move.w	ctSize(A0),saveNumFixedEntries(A3)	; Save the number of entries.
			Lea		ctTable(A0),A0						; Get ptr to table, and
			Move.l	A0,saveFixedCLUT(A3)				;	save it.
			
			Adda	#spBlockSize,Sp				; restore stack
			
			EndWith
			
; ThereÕs only one vidMode, so save it now because SetMode doesnÕt need to.
;
			Move.w	#firstVidMode,saveMode(A3)
			
; Attempt to re-open the Backlight driver because it might have been closed
;	if someone (AUX?) closed us and then tried to reopen us prior to
;	rebooting.  Currently, this call will fail the first time thru
;	because video is installed before backlighting on boot.
;
			Sub.w	#ioQElSize,Sp				; Get a param block on the stack.
			Move.l	Sp,A0						; Point to it.
			Lea		TIMBackLite,A1				; Get pointer to Backlight driver name.
			Move.l	A1,ioFileName(A0)			; Load it.
			_Open								; Open the driver.
			
			Add.w	#ioQElSize,Sp				; Restore the stack.

; All done!
;
@AllDone	MOVEQ	#noErr,D0					; no error
@EndOpen	RTS 								; return

@OpError2	ADDA	#spBlockSize,SP				; release the spBlock
			LEA		TTask(A3),A0				; get the time manager task block
			_RmvTime							; remove this element from the queue
			MOVE.L	dCtlStorage(A1),A0			; get the private storage back
			_DisposHandle
@OpError1	MOVE.L	#OpenErr,D0					; say can't open driver
			BRA.S	@EndOpen

			ENDWITH

**********************************************************************
*
* Video Driver Control Call Handler.  There are ten calls:
*
*	(-1) GoodBye kiss																			<t10>
*	(0)  Reset (VAR mode, page: INTEGER; VAR BaseAddr: Ptr);
*	(1)  KillIO
*	(2)	 SetMode(mode, page: INTEGER; VAR BaseAddr: Ptr);
*	(3)	 SetEntries ( Table: Ptr; Start,Count : integer );
*	(4)	 SetGamma ( Table : Ptr );
*   (5)  GrayPage (page);
*   (6)  SetGray (csMode = 0 for color, 1 for gray)
*	(7)	 SetInterrupt ( csMode = 0 for enable, 1 for disable)
*	(8)	 DirectSetEntries (not implemented)
*	(9)	 SetDefaultMode 
*
*   Entry: 	A0 		= param block pointer
*			A1 		= AuxDCE pointer
*	Uses:	A2		= ptr to cs parameters (ie. A2 <- csParam(A0))
*			A3 		= scratch (doesn't need to be preserved)
*			A4		= scratch (must be preserved)
*			D0-D3 	= scratch (don't need to be preserved)
*
*	Exit:	D0	  	= error code
*
**********************************************************************

;
; Decode the call
;

TIMVidCtl	
			MOVEM.L	A0/A1,-(SP)						; Preserve exit registers.

			MOVE.L	csParam(A0),A2					; A2 <- Ptr to control parameters
					
			MOVE.L	dCtlStorage(A1),A3				; A3 <- Ptr to private storage
			MOVE.L	(A3),D0							;
			_StripAddress							;
			MOVE.L	D0,A3							;

			MOVE.W	csCode(A0),D0					; get the opCode
			
			ADDQ.W	#1,D0							; offset opCode by 1						<t10>
			CMP.W	#10,D0							; IF csCode NOT IN [0..10] THEN				<t10>
			BHI.S	TIMCtlBad						;   Error, csCode out of bounds
			MOVE.W	TIMCtlJumpTbl(PC,D0.W*2),D0		; Get the relative offset to the routine
			JMP		TIMCtlJumpTbl(PC,D0.W)			; GOTO the proper routine
				
TIMCtlJumpTbl	
			DC.W	TIMGoodBye-TIMCtlJumpTbl		; $FF => NeedGoodBye Kiss					<t10>
			DC.W	TIMVidReset-TIMCtlJumpTbl		; $00 => VidReset
			DC.W	TIMCtlGood-TIMCtlJumpTbl		; $01 => KillIO
			DC.W	TIMSetVidMode-TIMCtlJumpTbl		; $02 => SetVidMode
			DC.W	TIMCtlBad-TIMCtlJumpTbl			; $03 => SetEntries			(not needed)
			DC.W	TIMCtlBad-TIMCtlJumpTbl			; $04 => SetGamma			(not needed)
			DC.W	TIMGrayPage-TIMCtlJumpTbl		; $05 => GrayPage
			DC.W	TIMCtlBad-TIMCtlJumpTbl			; $06 => SetGray			(not needed) 
			DC.W	TIMSetInterrupt-TIMCtlJumpTbl	; $07 => SetInterrupt
			DC.W	TIMCtlBad-TIMCtlJumpTbl			; $08 => DirectSetEntries	(not needed)
			DC.W	TIMCtlBad-TIMCtlJumpTbl			; $09 => SetDefaultMode		(not needed)

TIMCtlBad	MOVEQ	#controlErr,D0					; else say we don't do this one
			BRA.S	TIMCtlDone						; and return
			
TIMCtlGood	MOVEQ	#noErr,D0						; return no error

TIMCtlDone	MOVEM.L	(SP)+,A0/A1						; Restore exit registers.
			BRA		TIMExitDrvr

TIMGoodBye											;											<t10>
;---------------------------------------------------------------------
;
;	Upon the GoodBye Kiss, close the video driver
;
;---------------------------------------------------------------------

			BSR.S	TIMVidClose						; make the driver close call
			BRA.S	TIMCtlGood						; => no error
		
TIMVidReset
;---------------------------------------------------------------------
;
;	Reset the card to its default
;
;---------------------------------------------------------------------

			WITH	VDPageInfo,TIMVidPrivates
		
			MOVE	#FirstVidMode,csMode(A2)		; return default mode
			MOVE	#FirstVidMode,saveMode(A3)		; remember FirstVidMode as the requested mode
			CLR.W	csPage(A2)						; return page zero
			MOVE.L	saveBaseAddr(A3),csBaseAddr(A2) ; return the base address
			BSR		TIMGrayScreen					; paint the screen gray
			BRA.S	TIMCtlGood						; => no error

			ENDWITH
		
TIMSetVidMode
;---------------------------------------------------------------------
;
;	Set the card to the specified mode and page.  If it's not 1-bit 
;	mode, page zero, then return an error
;
;   If the card is already set to the specified mode, then do nothing.
;
;---------------------------------------------------------------------

			WITH	VDPageInfo,TIMVidPrivates
		
			CMP.W	#FirstVidMode,csMode(A2)		; is it one-bit (the first and only)
			BNE.S	TIMCtlBad						; => not a valid mode

			TST.W	csPage(A2)						; it is page zero?
			BNE.S	TIMCtlBad						; => not a valid page

			MOVE.L	saveBaseAddr(A3),csBaseAddr(A2)	; return the base address
			BRA.S 	TIMCtlGood						; => return no error
		
			ENDWITH

TIMSetEntries
;---------------------------------------------------------------------
;
;	Since TIM has no color table, thereÕs nothing do here.  Return a ctl
;	bad result (but do it up above in the control dispatcher, since it
;	saves a few bytes.
;
;---------------------------------------------------------------------
			
TIMSetGamma
;---------------------------------------------------------------------
;
;	Since TIM has no color table, there's no opportunity to set the
;	gamma correction in this hardware.  Return a ctl bad result (but
;	do it up above in the control dispatcher, since it saves a few bytes.
;
;---------------------------------------------------------------------
			
TIMGrayPage											
;---------------------------------------------------------------------
;
;	Clear the specified page in the current mode to gray
;
;		A1 = Ptr to AuxDCE
;		A2 = Ptr to cs parameter record
;		A3 = Ptr to private storage
;
;---------------------------------------------------------------------
			
			WITH 	VDPageInfo,TIMVidPrivates
		
			TST.W	csPage(A2)						; Is it requesting page zero?
			BNE.S	TIMCtlBad

			BSR		TIMGrayScreen					; paint the screen gray
			BRA.S	TIMCtlGood						; => return no error

			ENDWITH
		
TIMSetGray
;---------------------------------------------------------------------
;
;	Since TIM has no color table, there's no opportunity to set
;	luminence mapping in this hardware.  Return a ctl bad result (but
;	do it up above in the control dispatcher, since it saves a few bytes.
;
;---------------------------------------------------------------------
			
TIMSetInterrupt
;---------------------------------------------------------------------
;
;	Enable (csMode = 0) or disable (csMode = non-zero) VBL interrupts
;
;   As a future performance enhancement, interrupts on the card can be
;	disabled or enabled from software. For instance, if the cursor is
;	not on a screen, and there is nothing in the Slot Interrupt Queue
;	for that device, interrupts may be disabled reducing interrupt 
;	overhead for the system.
;
;	The slot interrupt queue element is always allocated by the Open call.
;	This routine just inserts and removes it from the slot interrupt task queue.
;
;		A1 = Ptr to AuxDCE
;		A2 = Ptr to cs parameter record
;		A3 = Ptr to private storage
;
;---------------------------------------------------------------------

			WITH	VDPageInfo,TIMVidPrivates
			
			Move.b	csMode(A2),D0					; get mode
			Ext.w	D0								; extend for word-sized flag
			MOVE.W	D0,IntDisableFlag(A3)			; save it
			BNE.S	TIMSIDone						; if disabling, setting the flag word is all that's needed

; if enabling interrupt simulator, then we need to prime the timer task

			BSR.S	TIMEnableVGuts					; call common code
TIMSIDone
			BRA.S	TIMCtlGood						; and go home
	
	
TIMEnableVGuts										; 	

			MOVE.L	A1,-(SP)						; jPrimeTime trashes A1									<3> djw
			LEA		TTask(A3),A0					; get time task block in A0
			MOVE.L	#kTIMVBLTime,D0					; delay for about 1/60th of a second
			MOVE.L	jPrimeTime,A1					; point straight at the Time Manager dispatch vector
			JSR		(A1)							; start the delay going
			MOVEA.L	(SP)+,A1						;														<3> djw

			RTS										; return home						

			ENDWITH
	
TIMSetDefaultMode
;---------------------------------------------------------------------
;
;	Since TIM only has one video sRsrc and itÕs already set, just return
;	a ctl bad result (but do it up above in the control dispatcher, since
;	it saves a few bytes.
;
;---------------------------------------------------------------------

**********************************************************************
*
* VideoClose releases the device's private storage and removes the 
*		interrupt handler.
*
*
* Entry:	A0 = param block pointer
*			A1 = AuxDCE pointer
*
* Other:	A2 = temporary AuxDCE pointer copy
*
**********************************************************************
			
			WITH	 TIMVidPrivates

TIMVidClose		
		
			MOVE.L	dCtlStorage(A1),A3				; A3 <- Ptr to private storage
			MOVE.L	(A3),D0							;
			_StripAddress							;
			MOVE.L	D0,A3							;

; Shut off VBL interrupts.
;
			MOVE.W	#1,IntDisableFlag(A3)			; set this word to ÒdisableÓ interrupts
			LEA		TTask(A3),A0					; get the time manager task block
			_RmvTime								; remove this element from the queue
			
; Close the Backlight driver.
;
			Sub.w	#ioQElSize,Sp					; Get a param block on the stack.
			Move.l	Sp,A0							; Point to it.
			Lea		TIMBackLite,A1					; Get pointer to Backlight driver name.
			Move.l	A1,ioFileName(A0)				; Load it.
			_Open									; Open driver to get the refNum.
			Bne.s	@SkipClose						; If open fails, donÕt try to close it.
			_Close									; Otherwise, close it.

@SkipClose			
			Add.w	#ioQElSize,Sp					; Restore the stack.
			
; Gray the screen.
;
			Bsr		TimGrayScreen					; Gray the screen.		
			
; Dispose of all storage.
;
			Move.l	saveFixedCLUT(A3),A0			; Dispose of our fixed-entry CLUT.
			_DisposPtr

			MOVE.L	dCtlStorage(A1),A0				; Dispose of the private storage
			_DisposHandle							;

			MOVEQ	#noErr,D0						; no error
			RTS										; and return
			
			ENDWITH

**********************************************************************
*
* Video Driver Status Call Handler.  Right now there are ten calls:
*
*	(0)  Error
*	(1)  Error
*	(2)	 GetMode
*	(3)  GetEntries
*	(4)	 GetPage
*	(5)	 GetPageBase
*	(6)  GetGray
*	(7)	 GetInterrupt
*	(8)	 GetGamma
*	(9)  GetDefaultMode
*
*   Entry: 	A0 		= param block
*			A1 		= AuxDCE pointer
*	Uses:	A2		= cs parameters
*			A3 		= pointer to private storage
*			D0-D3 	= scratch (don't need to be preserved)
*
*	Exit:	D0	  	= error code
*
**********************************************************************

TIMVidStatus	

			MOVEM.L	A0/A1,-(SP)						; Preserve exit registers.
			
			MOVE.L	csParam(A0),A2					; A2 <- Ptr to control parameters
		
			MOVE.L	dCtlStorage(A1),A3				; A3 <- Ptr to private storage
			MOVE.L	(A3),D0							;
			_StripAddress							;
			MOVE.L	D0,A3							;

			MOVE.W	csCode(A0),D0					; get routine selector
			
			CMP.W	#9,D0							;IF csCode NOT IN [0..9] THEN
			BHI.S	TIMStatBad						;  Error, csCode out of bounds.
			MOVE.W	TIMStatJumpTbl(PC,D0.W*2),D0	;Get the relative offset to the routine.
			JMP		TIMStatJumpTbl(PC,D0.W)			;GOTO the proper routine.
				
TIMStatJumpTbl
			DC.W	TIMStatBad-TIMStatJumpTbl		;$00 => Error
			DC.W	TIMStatBad-TIMStatJumpTbl		;$01 => Error
			DC.W	TIMGetMode-TIMStatJumpTbl		;$02 => GetMode
			DC.W	TIMGetEntries-TIMStatJumpTbl	;$03 => GetEntries
			DC.W	TIMGetPage-TIMStatJumpTbl		;$04 => GetPage
			DC.W	TIMGetPageBase-TIMStatJumpTbl	;$05 => GetPageBase
			DC.W	TIMStatBad-TIMStatJumpTbl		;$06 => GetGray				(not needed)
			DC.W	TIMGetInterrupt-TIMStatJumpTbl	;$07 => GetInterrupt
			DC.W	TIMStatBad-TIMStatJumpTbl		;$08 => GetGamma			(not needed)
			DC.W	TIMGetDefaultMode-TIMStatJumpTbl ;$09 => GetDefaultMode

			
TIMStatBad	MOVEQ	#statusErr,D0					; else say we don't do this one
			BRA.S	TIMStatDone						; and return
			
TIMStatGood	MOVEQ	#noErr,D0						; return no error

TIMStatDone	MOVEM.L	(SP)+,A0/A1						; Restore exit registers.
			BRA		TIMExitDrvr

TIMGetMode
;---------------------------------------------------------------------
;
;	Return the current mode
;
;		Inputs : A2 = pointer to csParams
;				 A3 = pointer to private storage
;
;---------------------------------------------------------------------

			WITH	TIMVidPrivates,VDPageInfo
		
			MOVE.W	saveMode(A3),csMode(A2)			; return the mode
			CLR.W	csPage(A2)						; return the page number
			MOVE.L	saveBaseAddr(A3),csBaseAddr(A2)	; and the base address
			
			BRA.S	TIMStatGood						; => return no error
	
			ENDWITH

TIMGetEntries
;---------------------------------------------------------------------
;
;	Fake the current contents of the CLUT.  There isn't really a clut around,
;	but that's no reason not to return a reasonable looking response
;
;		Inputs : A2 = pointer to csParams
;				 A3 = pointer to privates
;
;	For TIM the color table is fixed.  So, weÕll always return good values
;	as long as there is a reasonable looking color table around.
;
;	Idea:	If weÕre in indexed mode, weÕll cycle thru the input
;			table.  While doing this, weÕll ignore all entries
;			whose value fields are out of range.  For entries
;			whose value field are in range, weÕll return the
;			appropriate rgb fields.
;
;			If weÕre in sequential mode, we just need to write out
;			the number of entries we know about.
;
;---------------------------------------------------------------------

			With	TimVidPrivates

			Move.l	csTable(A2),D0					; If we were handed a nil pointer,
			Beq.s	TIMStatBad						;	then hike.
			_StripAddress							; Otherwise, make it 32-bit clean.
			
			Move.l	D4,-(Sp)						; Save work register.

; Calculate the index rangeÉ
;
			Move.w	saveNumFixedEntries(A3),D3		; Get number of entries to check against.
			
			Move.w	csCount(A2),D4					; Get the number of entries to set,
			Bmi.s	@GEErr							; 	and hike if itÕs out of range.
			Cmp.w	D3,D4							; If D4-D3 > 0 (count > # of entries),
			Bhi.s	@GEErr							;	then hike.
			Move.w	D4,D2							; Otherwise, copy the count.
			
			Move.l	D0,A0							; Get pointer to input table.
			Cmp.w	#indexEntries,csStart(A2)		; If table accesses are to be indexed,
			Beq.s	@GECom							;	then go on.
			
			Move.w	D4,D1							; Otherwise, sequence thru table from
			Add.w	csStart(A2),D2					;	csStart thru csCount entries.

; The following code is BAD, BAD, BAD!  We should build our own table here so
;	as to NOT mess up the userÕs data.  But all the previous Apple video drivers
;	have done the same thing, so weÕll continue the trend for now.

@TableLoop	Move.w	D2,value(A0,D1*colorSpecSize)	; Write the index into the table.
			Subq	#1,D2							; Decrement index.
			Dbra	D1,@TableLoop

@GECom		
@Repeat		Move.w	value(A0),D1					; Get the NEXT table position into D1.
			Cmp.w	D3,D1							; If this position is out of range,
			Bhi.s	@Until							;	then go on.
			
			Move.l	saveFixedCLUT(A3),A1			; Point to start of fixed CLUT.	
			Lea		(A1,D1*colorSpecSize),A1		; Index into right entry.

			Move.w	rgb+red(A1),rgb+red(A0)			; Copy	red,
			Move.w	rgb+green(A1),rgb+green(A0)		; 		green,
			Move.w	rgb+blue(A1),rgb+blue(A0)		;		blue.

@Until		Addq	#colorSpecSize,A0				; Point to next entry in input ColorTable.
			Dbra	D4,@Repeat

			Move.l	(Sp)+,D4						; Restore work register.
			Bra.s	TimStatGood						; Return noError.
			
@GEErr		Move.l	(Sp)+,D4						; Restore work register.
			Bra.s	TimStatBad						; Return statError.
			
			EndWith

TIMGetPage
;---------------------------------------------------------------------
;
;	Return the number of pages in the specified mode.  
;
;---------------------------------------------------------------------
			
			WITH	TIMVidPrivates,VDPageInfo
		
			CMP.W	#FirstVidMode,csMode(A2)		; this mode, or else
			BNE		TIMStatBad						; oh,oh
			
 			MOVE.W	#OBMPagesLCD,csPage(A2)			; return page count
			BRA		TIMStatGood						; => return no error
			
			ENDWITH
		
TIMGetPageBase
;---------------------------------------------------------------------
;
;	Return the base address for the specified page in the current mode
;
;---------------------------------------------------------------------
			
			WITH	TIMVidPrivates,VDPageInfo
		
			MOVE.W	csPage(A2),D0					; get the requested page
			BNE		TIMStatBad						; => no, just return
						
			MOVE.L	saveBaseAddr(A3),csBaseAddr(A2)	; return the base address
			BRA 	TIMStatGood						; => return no error
			
			ENDWITH
			
TIMGetGray
;---------------------------------------------------------------------
;
;	No CLUT, so this routine returns an status error.  It's implemented
;	in the Status dispatch table above.
;
;---------------------------------------------------------------------

TIMGetInterrupt
;---------------------------------------------------------------------
;
;	Return a boolean in csMode, set true if VBL interrupts are disabled
;
;---------------------------------------------------------------------

			WITH	TIMVidPrivates,VDPageInfo
		
			TST.W	IntDisableFlag(A3)				; test the interrupt state
			BEQ.S	@isOn							; if not on,
			MOVE.B	#1,csMode(A2)					;	then return disabled state.
			BRA		TIMStatGood						; 
@isOn	
			CLR.B	csMode(A2)						; return enabled state
			BRA		TIMStatGood
			
			ENDWITH
		
TIMGetGamma
;---------------------------------------------------------------------
;
;	No CLUT, so this routine returns an status error.  It's implemented
;	in the Status dispatch table above.
;
;---------------------------------------------------------------------

TIMGetDefaultMode
;---------------------------------------------------------------------
;
;	Read the card default mode from slot pRAM.
;
;		A1 = Ptr to AuxDCE
;		A2 = Ptr to cs parameter record
;		A3 = Ptr to private storage
;
;---------------------------------------------------------------------

; For most video drivers, we look in pRAM to see what the last
;	configuration set was.  However, for TIM, there only one
;	mode possible, so we just return that value here.

			WITH		VDPageInfo					; GDW1
			MOVE.B		dCtlSlotID(A1),csMode(A2)	; return the result
			BRA			TimStatGood					;
			ENDWITH									; GDW1

;---------------------------------------------------------------------
;
;	Exit from Control or Status.
;
;	 	A0 = Ptr to param block.
;		A1 = Ptr to AuxDCE.
;		D0 = error code.
;
;---------------------------------------------------------------------

TIMExitDrvr	BTST	#NoQueueBit,ioTrap(A0)			; no queue bit set?
			BEQ.S	TIMGoIODone						; => no, not immediate
			RTS 									; otherwise, it was an immediate call

TIMGoIODone	MOVE.L	JIODone,-(Sp)					; Get the IODone address,
			Rts										; 	and go there.

;=====================================================================
;
;	Utilities
;
;=====================================================================

TIMGrayScreen
;---------------------------------------------------------------------
;
;	Fill the screen with a 50% dithered gray pattern.
;			A3 = driver private storage
;
;	All registers are preserved
;

				WITH 		TIMVidPrivates

				MOVEM.L		D0/D2/D3/A0/A1,-(SP)	; save all registers

				Moveq		#true32b,D0				; Set up to flip into 32-bit mode.
				_SwapMMUMode						; Flip.
				Move.b		D0,-(Sp)				; Save previous mode.

				MOVE.L		#OneBitGray,D3			; get the one-bit gray pattern

				MOVE.L		saveBaseAddr(A3),A0		; get the frame buffer base address
				MOVE.W		#defmBounds_BLCD-1,D0	; get the # of rows

@NxtRow			MOVE.W		#(OBMLCDRB/4)-1,D2		; get the # of longs/row 
@NxtLong		MOVE.L		D3,(A0)+				; write gray
				DBRA		D2,@NxtLong				; for each scanline
				NOT.L		D3						; invert pattern on next row
				DBRA		D0,@NxtRow				; for each row

				Move.b		(Sp)+,D0				; Restore previous addressing mode.
				_SwapMMUMode
				
				MOVEM.L		(SP)+,D0/D2/D3/A0/A1	; restore registers
				RTS

				ENDWITH			

;-----------------------------------------------------------------------------
;	The Interrupt handler for the TIM Built-In Video
;
;	Since it doesn't make much sense for an LCD system to have all the 
;		interrupt related hardware that the CRT systems have since there
;		really isn't a blanking interval anyway.  On this machine we
;		simulate the slot interrupt system with a timer task.  We still 
;		call the slot VBL task queue so slot VBL tasks get called.
;-----------------------------------------------------------------------------
;
; The new time manager sets A1 to point to the TTask block on entry
;

TIMBeginIH		

				MOVE.L	A1,-(SP)					; save A1 (it's trashed by JVBLTask)
				
				CLR.W	D0							; set slot zero in D0	
				MOVE.L	JVBLTask,A0					; call the VBL task manager
				JSR		(A0)						; with slot # in D0
				MOVEA.L	(SP)+,A1					; restore A1 (ptr to TTask block)									<3> djw
				
				TST.W	tmXQSize(A1)				; test the flag word to see if ÒinterruptsÓ are on
													;	WARNING! - this field must be immediately after the TTask elem
				BNE.S	@Done						; if ­ 0, then ÒinterruptsÓ are disabled, so don't reprime
				
				MOVEA.L	A1,A0						; get time task block addr in A0									<3> djw
				MOVE.L	#kTIMVBLTime,D0				; delay for about 1/60th of a second
				MOVE.L	jPrimeTime,A1				; point straight at the Time Manager dispatch vector
				JSR		(A1)						; start the delay going
@Done			
				RTS									; and return to caller

		END