mac-rom/Interfaces/AIncludes/SonyEqu.a
Elliot Nunn 4325cdcc78 Bring in CubeE sources
Resource forks are included only for .rsrc files. These are DeRezzed into their data fork. 'ckid' resources, from the Projector VCS, are not included.

The Tools directory, containing mostly junk, is also excluded.
2017-12-26 09:52:23 +08:00

657 lines
25 KiB
Plaintext

;
; File: SonyEqu.a
;
; Contains: xxx put contents here xxx
;
; Written by: xxx put writers here xxx
;
; Copyright: © 1991-1993 by Apple Computer, Inc., all rights reserved.
;
; Change History (most recent first):
;
; <SM5> 8/3/93 BH Added drive queue flag (dqManEjBit) for manually ejectable
; device.
; <SM4> 12/7/92 rab Roll in Horror changes. Comments followÉ
; <H6> 8/4/92 SWC Increased the maximum head settling time to 100ms so
; slower-stepping drives won't try to read/write data before
; they're really ready.
; <H5> 2/25/92 CMP Added new status code to support speed check status call.
; <H4> 2/13/92 CMP Added a new control code for enabling/disabling retries and a
; global flag to indicate if retries are enabled.
; <H3> 1/21/92 CMP Added support for 32Mhz clock to SWIM2.
; <SM3> 5/17/92 kc Turn off onMac if undefined.
; <SM2> 4/16/92 JSM Roll-in change from Reality:
; <5> 4/14/92 DTY Fix up conditionals so the right offsets get generated for the
; System build. Moved extra stuff that was in the internal
; version of SonyEqu.a into this file, so we can get rid of the
; internal version.
; <4> 10/1/91 JSM DonÕt use onMvMac conditional, Modern Victorian never existed.
; <3> 1/30/91 gbm sab, #38: Change the Ôalready including this fileÕ variable to
; all uppercase (for security reasons)
;
; Version: 3.23
; Created: Friday, October 20, 1989 at 9:52:02 PM
;
; File: SonyEqu.a
;
; Assembler Interface to the Macintosh Libraries
; Copyright Apple Computer, Inc. 1984-1990
; All Rights Reserved
;
;--------------------------------------------------------------------
;
; The following information was formerly in "private" files that were
; not released to the general developer community.
;
; The information in this file is not needed for normal application
; development. These equates and macros were necessary for development
; of the Macintosh ToolBox and Operating System, and are likely to be
; dependent on their current implementation. Use of any information
; in this file is likely to cause your software to fail on future
; versions of Macintosh system software or hardware.
;
; Apple Developer Support will not support any use of the following
; information.
;
; In order to prevent any "accidental" use of this information, it has
; been disabled using the conditional-assembly variable defined below.
; If you change this to a non-zero value, you're on your own.
;--------------------------------------------------------------------
IF &TYPE('__INCLUDINGSONYEQU__') = 'UNDEFINED' THEN
__INCLUDINGSONYEQU__ SET 1
; If SonyNonPortable is defined to be non-zero, Then a machine type must be specified!
IF (&TYPE('SonyNonPortable') = 'UNDEFINED') THEN
SonyNonPortable EQU 0
ENDIF
IF (&TYPE('onMac') = 'UNDEFINED') THEN
onMac EQU 0 ; <SM3>
ENDIF
IF (&TYPE('onMacPP') = 'UNDEFINED') THEN
onMacPP EQU 0
ENDIF
IF (&TYPE('onNuMac') = 'UNDEFINED') THEN
onNuMac EQU 0
ENDIF
IF (&TYPE('onHcMac') = 'UNDEFINED') THEN
onHcMac EQU 0
ENDIF
; forDiskDup should be set to 0 for most uses
IF (&TYPE('forDiskDup') = 'UNDEFINED') THEN
forDiskDup EQU forROM ; Only significant for ROM builds.
ENDIF
; Note: supportsDCD means support for pass-thru connector as well.
; If this is 1, firstDCD and maxDCDcnt equates are needed as well.
; GetDrive must be adjusted for number of drives, as well!
IF onMac THEN
supportsPWM EQU 1 ; set to 1 if PWM supported
maxDrvNum EQU 4
supportsDCD EQU 1 ; set to 1 to include DCD code
firstDCD EQU 3
maxDCDcnt EQU 2
iwmMode EQU $1F
ENDIF
IF onMacPP THEN
supportsPWM EQU 1 ; set to 1 if PWM supported
maxDrvNum EQU 5
supportsDCD EQU 1 ; set to 1 to include DCD code
firstDCD EQU 4
maxDCDcnt EQU 2
iwmMode EQU $17 ; changed for Brian Howard to set half speed
; <?? same as Mac ??>
ENDIF
IF (&TYPE('onNuMacDCD') = 'UNDEFINED') THEN
onNuMacDCD EQU 0
ENDIF
IF onNuMac THEN
supportsPWM EQU 0 ; set to 1 if PWM supported
IF onNuMacDCD THEN
maxDrvNum EQU 4
supportsDCD EQU 1 ; set to 1 to include DCD code
firstDCD EQU 3
maxDCDcnt EQU 2
ELSE
maxDrvNum EQU 2
supportsDCD EQU 0 ; set to 1 to include DCD code
ENDIF
iwmMode EQU $17
ENDIF
IF onHcMac THEN
supportsPWM EQU 0 ; set to 1 if PWM supported
maxDrvNum EQU 5
supportsDCD EQU 1 ; set to 1 to include DCD code
firstDCD EQU 4
maxDCDcnt EQU 2
iwmMode EQU $17
ENDIF
IF SonyNonPortable THEN
IF (&TYPE('supportsMFM') = 'UNDEFINED') THEN
supportsMFM EQU 0
ENDIF
; SonyVars Data Structure (offsets):
; (1) Driver local vars.
; (2) Drive-specific vars.
; (3) More driver local vars.
; (4) Direct-connect driver locals.
;
; Drive Constants:
; (1) Floppy drive constants (tuneable).
; (2) Floppy drive sense/control constants.
; (3) Floppy drive formatting constants.
; (4) Direct-connect drive constants.
;
; Driver Constants:
; (1) Driver Control codes.
;
; Driver Vectors:
; (1) Location of disk routine vectors.
;
;_______________________________________________________________________
;_______________________________________;
; ;
; SonyVars Data Structure (offsets): ;
;_______________________________________;
;_______________________________________;
;
; (1) Driver local vars. ; * = known to be used in a copy-
; protection scheme.
; +---------------------+ DiskUnitPtr <-----+
; | | |
; | "driver local vars" | |
; | | EjectWait |
; +---------------------+ <----+ |
; | | Track | |
; | drive1 | DrvLclLth |
; | | DriveMisc | |
; +---------------------+ <----+ |
; | | Track |
; | drive2 | Sony disk driver
; | | DriveMisc vars, plus
; +---------------------+ locals for each
; | | Track diskette drive
; | driveX | |
; | | DriveMisc |
; +---------------------+ |
; | | FloppyLclEnd |
; | "more driver vars" | |
; | | SonyVarEnd <-----+
; +---------------------+ <-----+
; | | Track |
; | driveN | |
; | | DriveMisc |
; +---------------------+
; | | DCD driver vars
; | driveN | plus locals for
; | | each DCD drive
; +---------------------+ |
; | | DCDCmd |
; | DCD driver locals | |
; | | DiskVarLth <-----+
; +---------------------+
;
;_______________________________________________________________________
;
IF supportsMFM THEN
mfmSectTime EQU 75 ;7.5msec sector time
maxMFMSectors EQU 18 ;18 MFM sectors/track side (@1440K)
ENDIF
maxGCRSectors EQU 12 ;12 GCR sectors/track side (max)
diskUnitPtr EQU 0 ; pointer to device control entry
diskQVE EQU diskUnitPtr+4 ; disk VBL task control block
drive EQU diskQVE+14 ; * 0001 = int drive, 0002 = ext drive
wait EQU drive+2 ; extra wait time for speed changes
sideTrack EQU wait+2 ; destination side/track
oneToOne EQU sideTrack+2 ; open up rupts flg (no longer used)
active EQU oneToOne+1 ; * non-zero when driver is active
timeOut EQU active+1 ; * power time out
diskBuffer EQU timeOut+2 ; pointer to track data buffer
firstSect EQU diskBuffer+4 ; low sector number needed on a track
sectMap EQU firstSect+2 ; bit map of sectors needed on a track
firstFSeq EQU sectMap+4 ; first file seq # for current r/w request
fBlksDone EQU firstFSeq+2 ; file blocks done previous to this track
readErrInit EQU fBlksDone+2 ; init value, read error countdown cntr
readErrCnt EQU readErrInit+1 ; read error countdown cntr
recalInit EQU readErrCnt+1 ; init value, recal count
recalCnt EQU recalInit+1 ; recal count
wrgSectInit EQU recalCnt+1 ; init value, wrong sector countdown cnt
wrgSectCnt EQU wrgSectInit+1 ; wrong sector countdown cnt
badSpdInit EQU wrgSectCnt+1 ; init value, bad speed
badSpdCnt EQU badSpdInit+1 ; bad speed countdown value
command EQU badSpdCnt+1 ; I/O command
headSettle EQU command+2 ; disk head settle time (@100usec)
spdChgTime EQU headSettle+2 ; motor speed change time (@100usec)
pwrOnTime EQU spdChgTime+2 ; * power-on wait time (@100usec)
pwrOffTime EQU pwrOnTime+2 ; * power down time (@1/2sec)
seekTime EQU pwrOffTime+2 ; seek wait time (@100usec)
sectTime EQU seekTime+2 ; * sector time (@100usec)
dskVBLTime EQU sectTime+2 ; VBL task time (@16ms)
ejectTime EQU dskVBLTime+2 ; Eject time (@100usec)
ckDelta EQU ejectTime+2 ; delta time before speed recheck
ejectWait EQU ckDelta+4 ; VBL times after eject to ignore DIP
; Format/Verify code reuses some of these fields as follows:
gapSync EQU sectMap ; (2) start with 7 groups of intersector sync
twoSided EQU command ; (1) set non-zero for 2-sided format
sectSave EQU firstSect ; (2) SectMpSave must follow
sectMapSave EQU sectMap ; (8) uses SectMap, FirstFSeq, FBlksDone
sectCnt EQU firstSect ; (2) loop counter . . .
;_______________________________________;
;
; (2) Drive-specific vars.
drvLclLth EQU 66
drive1 EQU ejectWait+2 ; * internal drive variables
drive2 EQU drive1+drvLclLth ; * external drive variables
IF onMacPP | onHcMac THEN
drive3 EQU drive2+drvLclLth ; * real external for MacPP
floppyLclEnd EQU drive3+drvLclLth
ELSEIF onMac | onNuMac | onMac32 THEN
floppyLclEnd EQU drive2+drvLclLth
ENDIF
track EQU 0 ; current track location (used for spd)
writeProt EQU 2 ; * bit7=1=write-protected
diskInPlace EQU 3 ; * $FC-$FF= just ejected,
; 0=no disk in place,1=DIP,2=clamped
installed EQU 4 ; * 0=don't know, 1=inst., $FF=not inst.
sides EQU 5 ; * bit7=0=1 sided
dqel EQU 6 ; drive queue element for this drive
driveQLink EQU 6
driveQVers EQU 10
driveSize EQU 18 ; drive block size (DCD only!)
twoSideFmt EQU 18 ; * non-zero if 2-sided format
newIntf EQU 19 ; $FF if new interface, $00 for old
driveErrs EQU 20 ; drive soft errs
driveS1 EQU 20 ; drive block size (high word)
driveType EQU 22 ; old OffSpeed (no longer supported)
driveManf EQU 24
driveChar EQU 26
IF supportsMFM THEN
mfmDrive EQU 22 ;$FF=SuperDrive, $00=400K or 800K GCR
mfmDisk EQU 23 ;$FF=MFM, $00=GCR or unformatted
twoMegFmt EQU 24 ;$FF=2 meg MFM (1440K), $00=1 meg (720K)
ENDIF
driveMisc EQU 27
spdAdjCnt EQU 24 ; speed adjust count this drive
trkSpeedTbl EQU 26 ; 5-entry track speed table
tSTblCode EQU 0 ; first is speed code
tSTblDelta EQU 2 ; 2% speed code delta
tSTblTicks EQU 4 ; longword last time checked tick cnt
trkSTEnd EQU 66 ; end of drive vars
;_______________________________________;
;
; (3) More driver local vars.
wakeTimeCnt EQU floppyLclEnd ; WakeUp remainder count
saveRegs EQU wakeTimeCnt+2 ; * wakeup routine saves D3-D7,A3-A6 here
tagBufPtr EQU saveRegs+36 ; if non-zero, pointer to separate
; buffer for file tags . . .
tagBufOS EQU tagBufPtr+4 ; temp offset into buffer
diskErrs EQU tagBufOS+2 ; global soft errors
passThru EQU diskErrs+2 ; 0 if pass thru on external port
IF supportsMFM THEN
hasSuperDrives EQU passThru+1 ; $FF if at least 1 SuperDrive connected
curSector EQU hasSuperDrives+1 ; current sector being read/written
ELSE
sonyExtra EQU passThru+1 ; extra byte
curSector EQU sonyExtra+1 ; current sector being read/written
ENDIF
tcRdEnable EQU curSector+2 ; (byte) set non-zero to activate reads into cache
tcInstalled EQU tcRdEnable+1 ; (byte) non-zero when caching is installed and on
tcDrive EQU tcInstalled+1 ; (word) drive number of cache blks (zero to inval)
tcSideTrack EQU tcDrive+2 ; (word) side/track of cache blocks
tcSectMap EQU tcSideTrack+2 ; (long) bitmap of sectors currently cached
tcBuffer EQU tcSectMap+4 ; (long) pointer to track cache buffer (512+12)*12
tcNumCached EQU tcBuffer+4 ; (word) number read into cache
tcNumUsed EQU tcNumCached+2 ; (word actual number used
lastDrive EQU tcNumUsed+2 ; (word) set at CkDrvNum to previous value of Drive
timeOutDrive EQU lastDrive+4 ; (word) set at PowerDown to value of Drive
; Above value should have been +2 since lastDrive is a word.
timeQEl EQU timeOutDrive+2 ; a time queue element
IF onMac | (onMac32 and (NOT(onMacPP | onHcMac | forROM))) THEN
nextGZProc EQU timeQEl+tmQSize-2 ; (long) saved old GZ proc
; Above had been +tmQSize, but that changed from $C to $E.
sonyVarEnd SET nextGZProc+4 ; end of sony vars excluding DCD
ELSE
nextGZProc EQU timeQEl+tmQSize ; (long) saved old GZ proc
driveXlat EQU nextGZProc + 4 ; drive translate table (GetDrive,DiskOpen)
drvTblPtr EQU driveXlat+((maxDrvNum+1)*2)
; (long) pointer to DrvTbl to use
sonyVarEnd SET drvTblPtr+4
ENDIF
IF supportsMFM THEN
isSWIM EQU sonyVarEnd ;FDC type: $FF=SWIM, $00=IWM
mfmMode EQU isSWIM+1 ;Current register set selected: $FF=SWIM, $00=IWM
sonyVarEnd SET mfmMode+1 ; end of sony vars excluding DCD
ENDIF
IF onHcMac THEN
chipState EQU sonyVarEnd ; Byte holds flag to indicate IWM on or off
sonyVarEnd SET chipState+2 ; end of sony vars excluding DCD
ENDIF
IF hasPwrControls | hasPowerMgr THEN ; <1.1>
chipState EQU sonyVarEnd ; Bit7 - saved VIA dir, 6..0 - pmgr enables <1.1>
diskSleepQEL EQU chipState+2 ; sleep/wakeup queue element
sonyVarEnd SET diskSleepQEL+SleepqRec.SleepqSize ; end of sony vars excluding DCD
ENDIF
IF forDiskDup THEN
fmtParams EQU sonyVarEnd ;pointer to parameters for special format command
gcrFmtByte EQU fmtParams+4 ; saved GCR format byte for duplicator
clock32Mhz EQU gcrFmtByte+2 ; ( 1) Clock speed: $FF=32Mhz, $00=16Mhz <H3><SM4>
DisableRetries EQU clock32Mhz+1 ; ( 1) $FF=Don't perform retries, $00=normal <H4><SM4>
sonyVarEnd SET DisableRetries+1
ENDIF
IF onMac|onNuMacDCD THEN
;_______________________________________;
;
; (4) Direct-connect driver locals.
tagSize EQU 20 ; 20 bytes tags/block
dcdLclLth EQU 28 ; (use fields through DriveMisc)
drive3 EQU sonyVarEnd ; first DCD
drive4 EQU drive3+dcdLclLth ; second DCD
drive5 EQU drive4+dcdLclLth ; third DCD
drive6 EQU drive5+dcdLclLth ; fourth DCD
ENDIF
IF onMacPP|onHcMac THEN
;_______________________________________;
;
; (4) Direct-connect driver locals.
tagSize EQU 20 ; 20 bytes tags/block
dcdLclLth EQU 28 ; (use fields through DriveMisc)
drive4 EQU sonyVarEnd ; first DCD
drive5 EQU drive4+dcdLclLth ; second DCD
drive6 EQU drive5+dcdLclLth ; third DCD
ENDIF
IF onMac|onMacPP|onHcMac|onNuMacDCD THEN
stsRtnAddr EQU drive6+dcdLclLth ; DCD status call return address
dcdCmd EQU stsRtnAddr+4 ; command byte to DCD
response EQU dcdCmd ; response byte (command+$80)
seqNum EQU response+1 ; mb sequence number (sys commands only)
status EQU seqNum+1 ; returned status bytes
startBlock EQU status ; starting block # (in commands)
driveOut EQU startBlock+3 ; we send drive number in this field
driveIn EQU status+2 ; low 6 bits
tagBytes EQU status+4 ; tag bytes get stuffed here temporarily
devType EQU tagBytes ; first 20 bytes of status are written
devManufctr EQU devType+2 ; in the 20-byte tag buffer
devChar EQU devManufctr+2
devBlks EQU devChar ; low 3 bytes of this longword
devSpares EQU devChar+4
devBadBlks EQU devSpares+2
devMisc EQU devBadBlks+2 ; 8 bytes misc
bufSize EQU tagBytes+tagSize ; number of bytes/block
lastStatus EQU bufSize+4 ; last status returned
lastResult EQU lastStatus+4 ; error type
dcdFlags EQU lastResult+1 ; flag of whether we've done a reset
chkTime EQU dcdFlags+1 ; 100usec check ready count
maxTime EQU chkTime+2 ; maximum number of checks
stsBuffer EQU maxTime+2 ; 512 bytes of status
devReserve EQU stsBuffer
devIcon EQU devReserve+44
devFiller EQU devIcon+256 ; 32 bytes for optional name
diskVarLth EQU devFiller+32
stsBufSize EQU diskVarLth-stsBuffer
ELSE ;
diskVarLth EQU sonyVarEnd ;
ENDIF ;
; device characteristics byte:
devChEject EQU 4 ; ejectable if 1
devChWP EQU 3 ; write protected if 1
devChIcon EQU 2 ; icon available if 1
;_______________________________________;
; ;
; Drive Constants: ;
;_______________________________________;
dqSides EQU -1 ; Bit 7 of this byte: 0=single-sided Sony, 1=double sided
dqInstall EQU -2 ; 0=unknown, 1=installed, FF=no disk
dqDIP EQU -3 ; $FC-$FF = disk just ejected,
; 0 = no disk in place
; 1 = disk in place
; 2 = disk has been read
; >8 = non-ejectable disk
dqWrPrt EQU -4 ; Bit 7 of this byte: 1=disk is write protected.
dqManEjBit EQU 5 ; bit 5 of the dqInstall byte is set after <SM5> <BH 03Aug93>
; installation for a manual-eject drive
;_______________________________________;
;
; (1) Floppy drive constants (tuneable).
kSeekTime EQU 120 ; 12 ms trk-to-trk
kHdSetTime EQU 100*10 ; 100 ms head settle time <H6><SM4>
kEjectTime EQU 7500 ; .75 seconds eject time
kEjectWait EQU -4 ; - number of VBL calls after eject before dip check
kSectTime EQU 100 ; minimum sector time in 100 us increments (10 ms)
kPowerOn EQU 4000 ; read/write powerup time in 100 us increments
kRWPOff EQU 5 ; read/write power off time (in 1/2 seconds)
kDskVBLTime EQU 30 ; happens every 1/2 second
kSpdChgTime EQU 1500 ; speed change wait time = 150ms
kCkDelta EQU 14400 ; speed check delta time (in 1/60 sec) (4 min)
;_______________________________________;
;
; (2) Floppy drive sense/control constants.
; (ca1-ca0-sel-ca2).
dirLAdr EQU 0 ; dirtn low
dirHAdr EQU 1
rdDtaAdr EQU 1 ; side 0 read data
rdDta1Adr EQU 3 ; side 1 read data
stepLAdr EQU 4 ; step low and step sense address
stepHAdr EQU 5
IF supportsMFM THEN
mfmModeAdr EQU 6 ;Switch drive into MFM (constant) mode
gcrModeAdr EQU 7 ;Switch drive into GCR (variable) mode
ENDIF
mtrOnAdr EQU 8
mtrOffAdr EQU 9
ejectLAdr EQU 12
ejectHAdr EQU 13
dipAdr EQU 2 ; disk in place sense address
mfmDrvAdr EQU 5 ;1=SuperDrive, 0=400K or 800K GCR
wrProtAdr EQU 6 ; write protect sense address
sidesAdr EQU 9 ; sense for number of sides
tk0Adr EQU 10 ; track 0 sense address
readyAdr EQU 11 ; /Ready sense address
drvExstAdr EQU 13 ; sense=0 when a drive is connected
tachAdr EQU 14 ; tach feedback sense address
newIntfAdr EQU 15 ; implements ready handshake if 1
IF supportsMFM THEN
twoMegAdr EQU 15 ;0=1 meg disk, 1=2 meg disk
ENDIF
;_______________________________________;
;
; (3) Floppy drive formatting constants.
fmtByte EQU $02 ; 2-1 interleave, single-sided
fmt2Byte EQU $22 ; 2-1 interleave, double-sided
mustFindCt EQU 1500
minSync EQU 4 ; min number of inter-sector sync groups
IF supportsMFM THEN
numSDFmts EQU 3 ; 2 GCR + 1 MFM single-density
numDDFmts EQU 1 ; 1 MFM double-density format
ELSE
numSDFmts EQU 2 ; 2 GCR single density formats
ENDIF
IF onMac|onMacPP|onHcMac|onNuMacDCD THEN
;_______________________________________;
;
; (4) Direct-connect drive constants.
blkSize EQU 512 ; 512 bytes data/block
syncByte EQU $AA ; Sync byte for start of transmission
nonZerStat EQU 1
comErr EQU 2
; New HD20 error codes
wrtHsLw EQU $10 ; HSHK low before starting
wrtHSLwTO EQU $11 ; Time out waiting for HSHK to go low
wrtHSHighTO EQU $13 ; Time out waiting for HSHK to go high
rdHsHi EQU $20 ; HSHK high before starting
rdSyncTO EQU $21 ; Time out waiting for sync ($AA) bye
rdGroupTO EQU $22 ; Time out waiting for group
rdHoffSyncTO EQU $24 ; Time out waiting for sync after holdoff
rdHsHiTO EQU $25 ; Time out waiting for HSHK high
rdChksumErr EQU $26 ; Checksum error on response packet
invalidResp EQU $30 ; First byte in response packet was wrong
sqncNumErr EQU $31 ; Sequence number in response packet was wrong
dNumberErr EQU $32 ; Drive number in response packet was wrong
noResp EQU $40 ; No response packet ever received
; LastStatus
opFailed EQU 24 ; bit to test for operation failed
bChksum EQU 30 ; bit number for checksum error
; DCDFlags
resetonce EQU 0
retryonce EQU 1
maxTries EQU 4 ; max # times to try command
tSeekChk EQU 10 ; check during a seek every 1 ms
tSeekMax EQU 10000 ; max time for seek = 10 secs
tStsChk EQU 10 ; check during a status every 1 ms
tStsMax EQU 10000 ; max time for status = 10 secs
tQuickTime EQU 100
tNextChk EQU 7 ; check for next block after 700 µsec
tNextMax EQU 10000 ; max time for next block = 7 secs
tFVChk EQU 100 ; check during fmt/vfy every 10 ms
tFVMax EQU 18000 ; max time for fmt/vfy = 3 minutes
tRstAssert EQU 1000 ; assert reset for 100 msec
tRstSettle EQU 20000 ; 2 sec wait for busy to settle
tRstChk EQU 100 ; check during reset every 10 ms
tRstMax EQU 1600 ; max time for reset = 16 seconds
; DCD sense/cntl addr (ca1-ca0-sel-ca2)
dcdExist EQU 5 ; /Exist (/Sides=/DrvIn=1 also)
dcdReset EQU 1 ; for 1ms resets DCD controller
ENDIF ;
;_______________________________________;
; ;
; Driver Constants: ;
;_______________________________________;
;_______________________________________;
;
; (1) Driver Control codes.
verifyCC EQU 5 ; 'verify' control code
formatCC EQU 6 ; 'format' control code
tagBufCC EQU 8 ; 'set tag buffer' control code
tCacheCC EQU 9 ; 'track cache' control
iconIDCC EQU 20 ; 'get icon id' control code
iconCC EQU 21 ; 'get icon' control code
iconLogCC EQU 22 ; 'get logical icon' code
infoCC EQU 23 ; 'get drive info' code
RetriesCC EQU 17232 ; 'Enable/Disable Retries' code <H4><SM4>
IF forDiskDup THEN
FmtCopyCC EQU $5343 ;one-pass format/copy/verify for disk duplicator
ENDIF
GetRawDataCC EQU 18244 ; 'get raw track data' code <1.5>
; (2) Driver Status codes.
fmtLstCode EQU 6 ;Returns a list of disk formats
IF supportsMFM THEN
mfmStsCode EQU 10 ;'Get MFM status' status code
ENDIF
SpdChkSts EQU 17232 ; Checks disk speed at a given track <H5><SM4>
IF forDiskDup THEN
DupVerSts EQU $4456 ;disk duplicator version supported (to match features)
FmtByteSts EQU $5343 ;return address header format byte
ENDIF ; for disk duplicator
;_______________________________________;
;
; Driver Vectors: ;
;_______________________________________;
;_______________________________________;
;
; (1) Location of disk routine vectors.
jFigTrkSpd EQU DiskVars
jDiskPrime EQU jFigTrkSpd+4
jRdAddr EQU jDiskPrime+4
jRdData EQU jRdAddr+4
jWrData EQU jRdData+4
jSeek EQU jWrData+4
jSetUpPoll EQU jSeek+4
jRecal EQU jSetUpPoll+4
jControl EQU jRecal+4
jWakeUp EQU jControl+4
jReSeek EQU jWakeUp+4
jMakeSpdTbl EQU jReSeek+4
jAdrDisk EQU jMakeSpdTbl+4
jSetSpeed EQU jAdrDisk+4
niblTbl EQU jSetSpeed+4
jDiskSel EQU $B40 ; (long) vector to .Sony DiskSelect routine
jSendCmd EQU $B44 ; (long) vector to .Sony DCD SendCmd routine
jDCDReset EQU $B48 ; (long) vector to .Sony DCD DCDReset routine
IF supportsMFM THEN
jMRdAddr EQU $680 ; (long) vector to MFM MRdAddr
jMRdData EQU jMRdAddr+4 ; (long) vector to MFM MRdData
jMWrData EQU jMRdData+4 ; (long) vector to MFM MWrData
ENDIF
ENDIF ;end exclusion of private information
ENDIF ; ...already included