mirror of
https://github.com/elliotnunn/mac-rom.git
synced 2024-05-31 16:41:28 +00:00
4325cdcc78
Resource forks are included only for .rsrc files. These are DeRezzed into their data fork. 'ckid' resources, from the Projector VCS, are not included. The Tools directory, containing mostly junk, is also excluded.
245 lines
10 KiB
C
245 lines
10 KiB
C
/*
|
|
File: EgretEqu.h
|
|
|
|
Contains: xxx put contents here xxx
|
|
|
|
Written by: xxx put writers here xxx
|
|
|
|
Copyright: © 1992 by Apple Computer, Inc., all rights reserved.
|
|
|
|
Change History (most recent first):
|
|
|
|
<1> 6/3/92 RLM first checked in
|
|
|
|
*/
|
|
|
|
//************************************************************************
|
|
// EGRET Manager Equates
|
|
//
|
|
// File: EgretEqu.h
|
|
//
|
|
// Contains: Equate definitions used by EgretMgr
|
|
//
|
|
// Written by: Greg Shcroeder
|
|
//
|
|
// Copyright: © 1990, 1992 by Apple Computer, Inc., all rights reserved.
|
|
//
|
|
// This file is used in these builds: Mac32
|
|
//
|
|
//
|
|
// Change History (most recent first):
|
|
//
|
|
// <P2> 1/16/92 GS Update Egret Equates to include equates for the Cuda Firmware.
|
|
// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
|
|
// Pre-Pandora ROM comments begin here.
|
|
// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
|
|
//
|
|
// To Do:
|
|
//
|
|
//************************************************************************
|
|
|
|
//
|
|
// Egret parameter block
|
|
//
|
|
// Egret Manager Parameter Block
|
|
|
|
typedef struct {
|
|
Byte pbCmdType;
|
|
Byte pbCmd;
|
|
union {
|
|
long pblong;
|
|
short pbword[2];
|
|
Byte pbbyte[4];
|
|
} pbParm;
|
|
short pbByteCnt;
|
|
Ptr pbBufPtr;
|
|
Byte pbFlags; /*Was unsigned Byte*/
|
|
Byte pbSpareFlags; /*Was unsigned Byte*/
|
|
short pbResult;
|
|
Ptr pbCompletion;
|
|
} EgretPB, *EgretPBPtr;
|
|
|
|
#define EgretPBSize sizeof(EgretPB)
|
|
|
|
//________________________________________________________________________________________________
|
|
// Egret Globals
|
|
|
|
typedef struct {
|
|
short flags; // Egret Manager state flags
|
|
short sendHdrCnt; // # bytes in command header to send
|
|
Ptr sendHdrPtr; // ptr into command header
|
|
short sendDataCnt; // # data bytes to send for current cmd
|
|
Ptr sendDataPtr; // ptr to next data byte to send
|
|
short rcvHdrCnt; // # bytes to receive in response header
|
|
short rcvHdrIndex; // current index into receive header buffer
|
|
short rcvDataCnt; // # data bytes to receive
|
|
long rcvDataPtr; // ptr into receive buffer
|
|
Byte rcvHeader[12]; // temp buffer for response packet
|
|
Ptr completion; // ptr to completion routine for current packet
|
|
Ptr tickComp; // tick packet completion routine
|
|
Ptr PDMComp; // Eclipse PowerDown Message Handler Vector
|
|
Ptr adbPb; // ptr to ADB auto response param block
|
|
Ptr curPb; // ptr to current param block
|
|
Byte workPb[EgretPBSize]; // local parameter block for unsolicited packets
|
|
} EgretGlobals, *EgretGlblPtr;
|
|
|
|
#define EgretGlobSize sizeof(EgretGlobals)
|
|
//________________________________________________________________________________________________
|
|
// Response Packet
|
|
//
|
|
typedef struct { // record describing rcvHeader
|
|
Byte length; // number of bytes in rcvHeader (4+data count)
|
|
Byte respType; // packet type (0=ADB, 3=ticks)
|
|
Byte respFlag; // flags
|
|
Byte respCmd; // command
|
|
Byte respData[8]; // data bytes that came in (ticks, adb data)
|
|
} respPacket;
|
|
|
|
//________________________________________________________________________________________________
|
|
// Record Descriptor for Response Packet Header
|
|
//
|
|
typedef struct { // record descriptor for Response packet Header
|
|
Byte RespAttn; // Attention Byte
|
|
Byte RespPktType; // Packet type
|
|
Byte RespFlags; // Flags byte
|
|
Byte RespCmd; // Command number
|
|
Byte RespData[8]; // Data area for ADB or Time data
|
|
} RespHeader;
|
|
|
|
//________________________________________________________________________________________________
|
|
// Egret8 and Caboose Bit definitions
|
|
|
|
#define xcvrSes 3 // ADBu session PB3
|
|
#define viaFull 4 // Via full indicator PB4
|
|
#define sysSes 5 // System session is PB5
|
|
|
|
//________________________________________________________________________________________________
|
|
// Cuda VIA Bit Definitions
|
|
|
|
#define TReq 3 // CUDA transaction PB3
|
|
#define vByteAck 4 // acknowledge byte transfer PB4
|
|
#define TIP 5 // System transaction PB5
|
|
|
|
#define ACRmode %00001100 // shift reg mode (input with ext clock)
|
|
#define SRdir 4 // shift reg direction bit (0=input, 1=output)
|
|
// from Cuda, from System
|
|
#define vShift 2 // shift reg interrupt bit
|
|
|
|
//
|
|
//_______________________________________________________________________
|
|
// Egret Manager Flag Bit Definitions
|
|
|
|
#define busy 0 // flag bit 0 means we're busy with a packet
|
|
#define openData 1 // flag bit 1 means this is an open ended read response
|
|
#define BadPkt 2 // flag bit 2 means 1= Error Packet in progress
|
|
#define PBPending 3 // PB aborted and pending
|
|
|
|
#define IdleAckFlag 4 // flag bit 4 set means an IdleAck pkt expected (Cuda)
|
|
//
|
|
//_______________________________________________________________________
|
|
// Flag Bits in the ADB Status byte returned from the ADB processor
|
|
|
|
#define EgSRQ 0 // bit 0, 1=SRQ asserted
|
|
#define EgTimeOut 1 // bit 1, 1=Active device did not have data available
|
|
#define EgSRQError 2 // bit 2, 1=Device asserted excessive SRQ period
|
|
#define EgBusError 3 // bit 3, 1=Timing error in bit cell was detected
|
|
#define EgAutoPoll 6 // bit 6, 1=Data is from an Auto Poll
|
|
#define EgResponse 7 // bit 7, 1=Response packett in process
|
|
|
|
|
|
//________________________________________________________________________________________________
|
|
// Elsie/Erickson DFAC initial settings
|
|
|
|
#define ElsieDFAC 0x0057
|
|
#define EricksonDFAC 0x0000
|
|
#define EclipseDFAC 0x0010 // initial dfac values for Eclipse and Spike <t3> djw
|
|
#define SpikeDFAC 0x0010
|
|
|
|
|
|
//________________________________________________________________________________________________
|
|
// Packet types
|
|
|
|
|
|
#define adbPkt 0x0000 // ADB request packet type
|
|
#define pseudoPkt 0x0001 // pseudo commands packet type
|
|
#define errorPkt 0x0002 // error packets type
|
|
#define tickPkt 0x0003 // Egret 1 second tick packet type
|
|
#define PDMPkt 0x0004 // PowerDown Message Packet (From Egret) <T2>
|
|
#define PDMVectPkt 0x00FE // Eclipse Init PowerDown Message vector <T2>
|
|
#define specialPkt 0x00FF // used to install ADB handler/pb
|
|
|
|
//________________________________________________________________________________________________
|
|
// The following equates are ShutDown Initiator codes.
|
|
//
|
|
|
|
#define FrmChassisSw 0x01 // Initiate ShutDown from Chassis Power Switch
|
|
#define FrmKeyBdSw 0x02 // Initiate ShutDown from KeyBoard Switch
|
|
#define FrmKeySw 0x03 // Initiate ShutDown from Chassis Power Switch
|
|
|
|
//
|
|
//________________________________________________________________________________________________
|
|
// Pseudo commands
|
|
|
|
#define NopCmd 0x00
|
|
#define APoll 0x01 // start/stop autopoll
|
|
#define Rd6805addr 0x02 // read 6805 address
|
|
#define RdTime 0x03 // read real time clock pseudo commmand
|
|
#define RdRomSize 0x04 // get romsize command
|
|
#define RdRomBase 0x05 // get rom base address
|
|
#define RdRomHeader 0x06 // get rom header address
|
|
#define RdPram 0x07 // read parameter ram
|
|
#define Wr6805Addr 0x08 // write 6805 address
|
|
#define WrTime 0x09 // write time command
|
|
#define PwrDown 0x0A // Erickson powerdown command
|
|
#define WrPwrupTime 0x0B // Erickson set powerup time
|
|
#define WrPram 0x0C // write parameter ram
|
|
#define MonoReset 0x0D // Monostable reset
|
|
#define WrDFAC 0x0E // write DFAC
|
|
#define WrIIC 0x0E // write IIC
|
|
#define Egretdiags 0x0F // run egret diagnostics
|
|
#define RdCtlPanel 0x10 // Sense control panel enable
|
|
#define RdBattery 0x10 // Sense if battery was changed <P1>
|
|
#define ResetEgret 0x11 // Egret Cold start command
|
|
#define EnDisVpp 0x12 // ELSIE enable/disabe VPP
|
|
#define SetIPL 0x12 // Set IPL level <P1>
|
|
#define EnDisFiles 0x13 // enable/disable file server flag
|
|
#define SetAutopoll 0x14 // set autopoll rate
|
|
#define RdPramSize 0x15 // get parameter ram size
|
|
#define RdAutoRate 0x16 // get autopoll rate
|
|
#define WrBusDelay 0x17 // set bus delay constant
|
|
#define RdBusDelay 0x18 // get busdelay constant
|
|
#define WrDevList 0x19 // set ADB device list
|
|
#define RdDevList 0x1A // get ADB device list
|
|
#define Wr1SecMode 0x1B // set 1 second interrupt mode
|
|
#define EnDisKbdNmi 0x1C // enable/disable keyboard NMI
|
|
#define EnDisParse 0x1D // enable/disable post parse R2 A2
|
|
#define WrHangTout 0x1E // set hang threshold
|
|
#define RdHangTout 0x1F // get hang threshold
|
|
#define SetDefDFAC 0x20 // Set Default DFAC String <T2>
|
|
#define EnDisPDM 0x21 // Enable/Disable PowerDown Message <T2>
|
|
#define DFACorIIC 0x22 // Std DFAC or IIC Support <P1>
|
|
#define WakeUpMode 0x23 // Enable/Disable WakeUpMode <P1>
|
|
#define TimerTickle 0x24 // ShutDown Timer Tickle <P1>
|
|
#define MaxPseudoCmd TimerTickle // largest possible pseudo command number <P1>
|
|
|
|
//
|
|
//__________________________________________________________________________________________________
|
|
// MISC Equates
|
|
|
|
|
|
#define InvPseudo 0x0202 // Invalid Pseudo packet <6>
|
|
#define InvPkt 0x0201 // Invalid Packet type <6>
|
|
|
|
#define Enable 0x00FF // Nonzero to enable Egret functions <T2>
|
|
#define Disable 0x0000 // Zero to disable Egret functions <T2>
|
|
#define MaxRetries 0x0100 // 256 Retries to communicate with Egret in SendEgretCmd<9>
|
|
#define MaxTout 0x2000 // timeout waiting for Vsr irq from Egret 10millsecs<9>
|
|
#define DelayCnt 0x0068 // count for register base delay100us routine
|
|
#define EclipseDelay 00025 // Extra delay required for Eclipse <T2>
|
|
#define PollStackSize 0x0020 // 32 byte buffer for SCC Poll data
|
|
#define Mode3Clock 0x0003 // Mode 3 packets for clock data
|
|
#define MRUAddr 0x00B3 // MRU address in Egret/Caboose <10>
|
|
#define LRUAddr 0x00B4 // LRU address in Egret/Caboose <10>
|
|
#define CMRUAddr 0x00B2 // MRU address in Cuda <P1>
|
|
#define CLRUAddr 0x00B3 // LRU address in Cuda <P1>
|