mac-rom/OS/StartMgr/StartInit.a

3990 lines
161 KiB
Plaintext

;__________________________________________________________________________________________________
;
; File: StartInit.a
;
; Contains: This code must be placed at the very beginning of the ROM. It contains the hardware
; start vectors and low level hardware initialization code. It is entered through the
; reset vector on a hardware reset or cold start.
;
; Originally written by Larry Kenyon February 1983
; Substantially rewritten by Wayne R. Loofbourrow June 1986
; Hopelessly scrambled by Jerome T. Coonen mid-September 1986
; Mercilessly hacked by everyone but the Pope throughout 1989 and beyond
; Unscrupulously kludged by TERRORists first year, last decade, 20th century
; Totally messed up by SuperMario players Nov 1991-Jan 92
; Released upon the world by Pandorists (Not!) MCMXCII
; Scrambled again by SuperMario World May 92 - Dec 92
; Repaired by PDM guys 1993
; Spell-Checked by TNT guys shortly thereafter
;
; Copyright: © 1983-1994 by Apple Computer, Inc. All rights reserved.
;
; Change History (most recent first):
;
; <SM163> 2/2/94 DCB Added call to INITSCSIBOOT so that it gets called after Slot
; Interrupts and ADB are initialized. It used to be called from
; SCSIMgrInit but that was too early and screwed up third party
; SIMs.
; <SM161> 1/28/94 chp For TNT: allow most everything except the .Sound driver.
; <SM160> 1/4/94 LB For TNT: allow floppy driver installation.
; <SM159> 12/13/93 PN Roll in KAOs and Horror changes to support Malcom and AJ
; machines.
; <SM158> 12/2/93 chp For TNT: allow serial driver installation.
; <SM157> 11/10/93 chp For TNT: enable VIA interrupts for SetUpTimeK; install a
; pseudo-slotVBL interrupt for PCI video cursor tracking; disable
; several drivers.
; <SM156> 11/9/93 KW added some eieioSTP macros. Only expands for CygnusX1 ROM
; <SM155> 11/8/93 SAM Roll in <MC7> from mc900ftjesus.
; <MC7> 11/8/93 SAM Removed some confusing, misleading, and commented out code to
; adjust gestalt's lram size (following initgestalt).
; <SM154> 10/25/93 SAM Roll in <MC6> from mc900ftjesus.
; <MC6> 10/25/93 SAM Moved the call to CheckforResetPRAM a little earlier in the boot
; (just following the Cuda/Egret init).
; <SM153> 10/15/93 SAM Roll in <mc5> from mc900ftjesus.
; <MC5> 10/15/93 SAM Deleted the NuBusReset code for Bart (leftover from the last
; checkin). Removed the code that created the bogus "heap"
; gestalt selector.
; <SM152> 10/12/93 SAM Roll in <MC4> from mc900ftjesus.
; <MC4> 10/12/93 SAM Moved the Bart Nubus reset from here to USTStartup. Made the
; figment "heap" gestalt setup universal.
; <SM151> 10/4/93 JDR undo change SM150. it was already being done in SndPrimitives.a
; <SM150> 10/1/93 KW Installing tables for sound primitives. Allows Quadras/Wombats
; to record, set volume level etc. Great if moved to SoundMgr
; initialization code.
; <SM149> 9/28/93 SAM From mc900ftjesus.
; <MC3> 9/26/93 pdw Added NOT hasAsyncSCSI around call to InitSCSIHW since
; InitSCSIMgr does the hardware init when AsyncSCSI is present.
; <MC2> 9/25/93 SAM Removed the build time conditional around the call to InitEgret.
; Added a runtime check to EgretDFACandPDM. Cleaned up the
; intialization of SoundBase (again). Changed CheckForEgret to
; CheckForEgretOrCuda. Removed PDM Evt1 support from NuBusReset &
; DynamicBoxFlag
; <SM146> 9/13/93 SAM Updated the Gestalt heap install stuff. Initialized the
; HeapUtilities globals ptr .
; <SM145> 9/12/93 pdw Split up InitIOMgr into InitIOPStuff, InitDeviceMgr and
; InitDrivers.
; <SM144> 9/3/93 GMR Changed bit used for BART slot disable from bit 0 to bit 7. Also
; fixed a problem found by Fernando in RdVidParam that causes us
; not to boot if we have a video card without on-board video
; connected.
; <SM143> 9/1/93 SKH Finish SetupTimeK export. (Forgot to add change history)
; <SM142> 9/1/93 SKH Export SetupTimeK because the portable dynamic speed stuff needs it
; <SM141> 8/23/93 pdw Added support for LimitPRAMClear, IgnoreCmdOptShDel,
; LoadDefaultOnly - three options required for AIX security,
; enabled by setting bits in PRAM $76.
; <SM140> 8/20/93 BG Modified DynamicBoxFlag to know about CarlSagans.
; <SM139> 8/20/93 chp Rather than calling InitPDMDMA explicitly from StartInit,
; install that routine as an interrupt initialization postproc in
; the AMIC interrupt primitives table. (See InterruptHandlers.a).
; It is executed as part of the call to InitIntHandler.
; <SM138> 8/16/93 RC Made changes to CheckForResetPRAM routine. I added support for
; saving off some of the PRAM information which is needed for
; security reasons (mostly needed by the AUX team)
; <SM137> 8/12/93 SAM Undid the last two changes (not needed). Added code to
; NuBusReset to disable Slot E IRQs for multiple slot PDM style
; machines with a BART NuBus controller.
; <SM136> 8/12/93 KW adding two more smurf wombats
; <SM135> 8/11/93 KW added some branches based on new smurf boxes
; <SM134> 8/4/93 JDR Integrate sound manager 3.0 project.
; <SM133> 8/3/93 GMR Added code to issue a NuBus reset on PDM machines with BART.
; Ideally, this should be before diagnostics....
; <SM132> 7/20/93 SAM Changed the name of the offset in the new ROM header that points
; to the 7.0 toolbox init code to be "InitSys7ToolBoxOff" instead
; of InstallMgr which wasn't very descriptive. Added code to
; create 768 master pointers in the System heap at its creation.
; This will help keep the sys heap from becoming fragmented.
; <SM131> 7/9/93 PN Remove my last change
; <SM130> 7/2/93 PN Add conditional hasCPUIDregister
; <SM129> 7/1/93 KW Set SoundBase to ROM address 40800000 if ROM is in RAM.
; <SM128> 6/29/93 SAM Added code to install a "heap" gestalt selector if Figment is
; around.
; <SM127> 6/29/93 SAM Commented out the code that added the Edisk size to the
; *physical* RAM size! All logical RAM size adjustments are made
; from within Gestalt (as it was).
; <SM126> 6/24/93 SAM Updated PDM's dynamic boxflag code to include a new set of
; "boxes" (fridge).
; <SM125> 6/22/93 kc Setuo parameter to FROVideo before calling it.
; <SM124> 6/21/93 kc Fix InitIOMgr so that it doesn't trash a0 (and the UnitTable).
; <SM123> 6/17/93 rab Moved initialization of expandmem to before InitIntHandler.
; Fixes some boot problems caused by the Ludwig roll-back.
; <SM122> 6/14/93 kc Roll in Ludwig.
; <LW17> 4/14/93 fau Made the CheckForTV use CivicExists, instead of BoxFlags.
; <LW15> 4/11/93 chp Rewrite serial driver installation code in InitIOMgr. Use
; ProductInfo to select the correct 'SERD' resource.
; <LW14> 4/9/93 fau Changed the EdiskDriver to use the InstallDrvr routine so that
; it doesn't stomp on a previously installed driver.
; <LW13> 4/8/93 fau Changed the open of the netboot driver to use the InstallDrvr
; routine, so it uses the lowest refnum above -47, instead of the
; resource id. This is much more friendly.
; <LW7> 2/16/93 ejb move initialization of realtime mgr, rt drvr, and dsp std snd to
; gibbly so that strings and icons can be localized.
; <LW6> 2/11/93 PW Removing IMPORT of SCSILoad (it's not used in this file).
; <SM121> 6/3/93 SAM Chas. I thought we had an agreement here... Added dynamic
; boxflag hack for HMC machines.
; <SM120> 6/1/93 CSS Touch this file so Universal ROM version can be updated (v $02).
; <SM119> 5/18/93 CSS Touch this file so Universal ROM version can be updated (v $01).
; <SM118> 5/9/93 SAM Removed bogus soundmgr init code that was writing an
; uninitialized value into the sound mgr globals.
; <SM117> 5/7/93 joe & CCH. Bumped MinSysExtra constant to compensate for all the
; new stuff being thrown in. It's previous size was causing
; booting problems on PDMs and Smurfs.
; <SM116> 5/6/93 SAM Removed some _SwapMMUMode calls. Fixed ConfigureRAM to not
; write past the top of RAM if the RAM size is not a multiple of
; 64k. Changed another one of those nasty SIGNED address
; comparisons.
; <SM115> 5/5/93 CSS Touch this file so Universal ROM version can be updated (v $00).
; <SM114> 4/20/93 CSS Touch this file so Universal ROM version can be updated.
; <SM113> 4/11/93 chp Rewrite serial driver installation code in InitIOMgr. Use
; ProductInfo to select the correct 'SERD' resource.
; <SM112> 4/8/93 SAM Added calls to "INSTALLBASSCOMMON" and "FORCEINITFONTSCALL" to
; initalize Bass before the first call to _InitGraf (which calles
; _InitFonts).
; <SM111> 4/1/93 GMR Moved PDM's DMA stuff to InterruptHandlers.a.
; <SM110> 3/31/93 GMR Fixed a bug in PDM's DMA handler when dealing with bits 8,9.
; Optimized the handler. This stuff belongs in InterruptHandlers.a,
; and will be moved there soon.
; <SM109> 3/31/93 chp Remove support for Cyclone EVT3 (limited changes from Ludwig).
; <SM108> 3/25/93 RB In order for interrupt handlers to run from RAM when running a
; virtual ROM, the InfoRecord needs to be adjusted so it points to
; its RAM copy.
; <SM107> 3/11/93 SAM Indirection, indirection. Why use one instruction when you can
; use two. Lvl5IrqHandler.
; <SM106> 3/11/93 SAM Added a check before the adjustment to total ram size before
; InitGestalt that wont adjust anything if the EDisk was not
; stolen from the 68k mmu tables. Added a refCon to the DMA irq
; handler.
; <SM105> 3/4/93 RC Added check of AMIC to determine if we need to load the SERD 1
; resource or not. One line is currently commented out to keep it
; from loading until we have fixed hardware
; <SM104> 2/25/93 RB When running from RAM, the hard coded offsets used for ROM
; vectors need to be adjusted after calling InitROMVectors.
; <SM103> 2/23/93 RC Bug fix to the Level 5 Interrupt Handler for PDM/AMIC
; <SM102> 2/22/93 RC Use a Gestalt check around GoNative.
; <SM101> 2/20/93 SAM Ok, here goes...Added a InitDMA routine that sets up a structure
; in expandmem for dealing with multiple DMA interrupt sources.
; Rearranged several calls after BootRetry to 1) make more sense,
; and 2) necessitate creating expandmem much earlier than it
; previously was. Moved the installation of the 040BlockMove
; routine much earlier. Put several Supports24Bit's round things.
; Changed many *signed* comparisons - everyone needs to stop
; making singed Address comparisions! Made the GoNative install
; universal.
; <SM100> 2/12/93 PN Change BEQ.S to BEQ.W to fix the build
; <SM99> 2/10/93 RB Reviewed by CS. Added code to copy ROM code into RAM for
; performance. Removed some of the NOT LC930 stuff, since it is
; obsolete after the test code Steve added.
; <SM98> 2/5/93 GMR Added check for SWIM3 in InitIOMgr, to support SonyDriver on
; PDM. Extended SetupHWBases to deal with all 96 basesValid bits.
; Setup IWM in SetupHWBases if SWIM3Exists.
; <SM97> 2/5/93 RC GoNative is needer for both PDM and Smurf
; <SM96> 2/5/93 SAM Temporarily conditionalize assembly of the GoNative installation.
; <SM95> 1/15/93 RC Took out the Auto Launch of RAM Disk on PDM
; <SM94> 1/10/93 RC Added more nops for Smurf
; <SM93> 12/23/92 RC GoNative turned back on
; <SM92> 12/21/92 SWC Pulled InstallPrivTrap out of the has040MMU conditional since it
; installs the correct routine into the trap for both an Ô881 and
; an Ô040 style FPU.
; <SM91> 12/17/92 RB Removed some of the LC930 conditionals now that Steve added a
; bunch hasPwrControls conditionals. Changed some of the other
; LC930 conditionals to use has2MegROMOrMore. Others were changed
; to has040. Re-enabled some 24 bit mode code with the conditional
; Supports24Bit.
; <SM90> 12/11/92 RC Temporarily comment out the Branch to GoNative until the
; GoNative code is a little more ready for the ROM
; <SM89> 12/11/92 SWC Rearranged stuff at BootRetry so that machine/feature specific
; support can be setup earlier so there's not a gray region where
; the world is kinda set up.
; <SM88> 12/10/92 JDB ejb: Fix my ENDIF
; <SM87> 12/10/92 ejb remove code for installing RTSndIn Driver- as this is not
; needed. The SoundMgr will take care of this.
; <SM86> 12/8/92 RC Installing GoNative as soon as Resource manager and memory
; manager are up and alive
; <SM85> 12/8/92 SWC Fixed an LC930 gotcha from <SM84>.
; <SM84> 12/8/92 SWC Moved LCDScreenChk->PowerMgr.a. Cleaned up the backlight, DSP
; driver loading since some pieces of code were duplicated 3
; times. Did some general cleanup and removed unused code.
; <SM83> 12/06/92 HY Remove space in .Sound and .EDisk definitions as a result of
; change in <SM82> which preceded strings with STRING PASCAL directive.
; This caused the EDisk and Sound drivers from being loaded.
; <SM82> 12/5/92 SWC Moved InitSndHW, InitSndNoRAM to SndPrimitives.a. Removed the
; ASC test before the call to InitSndHW since that routine will
; now do what's appropriate for each machine. Cleaned up the
; initial low mem setup. Removed the PowerBook 140 boxFlag patch.
; <SM81> 12/4/92 SWC Moved InitMemMgr->MemoryMgr.a, InitRsrcMgr->ResourceMgr.a,
; InitDTQueue->DeferredTaskMgr.a, SwitchMMU->MMU.a.
; <SM80> 12/3/92 PN Back out the change in SM72 since a better fix is implemented in
; Startboot.a
; <SM79> 12/02/92 HY Zeroed out memory on stack before calling InitEgretAlt. This could
; potentially cause sporadic crashes on RESTART. Also changed
; InitHiMemGlobals to use BaseOfROM to decide where BufPtr should
; be set to in 24-bit mode (LC based machines are at $00A00000).
; Bracketed call to EnableSwimIOPInts in InitIOMgr with "IF hasIopSwim".
; <SM78> 12/2/92 SWC Moved PortableCheck to PowerManager.a.
; <SM77> 12/2/92 ejb move installation of RTSnd beforeRTDrvr since driver now calls
; StdSndSignInCPUDevice
; <SM76> 12/1/92 SWC Removed the call to EnableParityInts since it was only used on
; the IIfx (and has gone away).
; <SM75> 11/25/92 PW Changed minSysExtra value from 16K to 64K to attempt to (and
; apparently did) fix the many drivers-not-loading bugs (NewPtr
; failed).
; <SM74> 11/24/92 RB In the SetApp_Base routine, put support for 24 bit mode.
; <SM73> 11/20/92 fau Put a test around InitSndHw so we don't call it if an ASC doesn
; not exist. Enabled MUNI Interrupts on Cyclone.
; <SM72> 11/19/92 PN Radar #1050264 the SetAppBase patch needs to be rolled in
; correctly. At the early init time, the patch to the _SetAppBase
; is not needed. Yet we roll the patch into SetApplBase routine so
; we have to replace _SetAppBase with JSR SetApp_Base so that the
; _InitApplZone is not called.
; <SM71> 11/14/92 kc Export MyROM.
; <SM70> 11/11/92 RB The code that sets MemTop should be executed before Gestalt is
; initialized. Moved the code to earlier in the boot process. Put
; back the old Sound Manager (7.1) for the LC930, since Sadism is
; not ready.
; <SM69> 11/11/92 GD Made a change to support Romulator for PowerBooks.
; <SM68> 11/7/92 rab Roll in Horror changes. Comments follow: ¥ÊFrom StartInit.a ¥
; <H11> 8/25/92 BG Modified SetupTimeK so that the VIATime loop is unaligned. This
; 'fixes' a problem with the floppy driver doing a wait loop that
; is unaligned and taking too long, causing MFM writes to occur
; too late.
; <H10> 7/21/92 NJV Removed hasSonora1 conditionalized code (no longer needed)
; <H9> 7/13/92 GMR Now initialize ExpandMem before InitADB so we can initialize the
; CrsrDev stuff when InitADB is called.
; ¥ÊFrom StartInitPatch.a ¥
; <H19> 9/13/92 NJV Added initialization of DJMEMC's new diagnostic register on a
; warm start (the Sound Block Configuration Register).
; <H16> 07-01-92 jmp Made the change in <H13> only take effect on warm-starts.
; <H13> 06-26-92 jmp Added some code to InitSoundHW that checks for the presence of a
; djMEMC. If a djMEMC exists, this code then shuts off the
; djMEMCÕs (DAFBÕs) sync control so that video is off BEFORE the
; boot beep occurs.
; <H12> 6/24/92 ag Added Dartanian to the list of cpu's which must use the sound
; pan registers for volume control. Allow Zero volume which will
; mute the boot beep. Zero volume is only achived if the user set
; it to zero, invalid pram will default to level 5.
; <SM67> 11-04-92 jmp Cleaned up the enable cache code to be a little more
; maintainable.
; <SM66> 11/4/92 mal Put back enable cache code that was erroneously removed in rev
; 64. Removed 2nd StartInit.a from end of file that was
; erroneously added in rev 64.
; <SM65> 11/3/92 RB Changed the use of LC930 in the 24 bit mode support test to
; Supports24Bit. Change the include of SCSIEqu.a to SCSI.a,
; VideoEqu.a to Video.a and ATalkEqu.a to AppleTalk.a
; <SM64> 11/3/92 fau Together with Mlaw: Loaded a new SoundBase that points to the
; start of the MarioBootSound in ROM, instead of the middle of
; ROM. Also, chaned the gestalt in <SM59> to use a TestFor macro,
; as it is much faster.
; <SM63> 11/2/92 fau Added a check on Cyclone/Tempest to determine if the user has
; Cmd-opt-T-V held down (if so, it will allow for booting off
; without a monitor, directing output to the composite video
; port).
; <SM62> 10/30/92 RB On the LC930, do not force 32 bit mode, since it supports 24 bit
; mode.
; <SM61> 10/29/92 RB Removed the temporary ADBReinit call I added because it takes a
; long time. Added a low ROM address for InitROMVectors since the
; intl' OS guys need it.
; <SM60> 10/27/92 CSS Changed some short branches to word branches.
; <SM59> 10/27/92 fau Used gestaltSoundHardware to determine whether to install the
; sound interrupt handlers for ASC machines.
; <SM58> 10/22/92 fau Moved ADBReinit <SM56> to before grayscreen, so that the user
; won't see a frozen mouse. This call should just be temporary
; and a fix to the Q950 should be found. ADBReinit takes like 1
; second to execute!
; <SM57> 10/22/92 fau Got rid of all MMCExists by making them DSPExists or PSCExists.
; <SM56> 10/22/92 RB Exclude any PowerManager calls from the LC930 build (1 Meg ROM).
; Call ADBReInit at Startup to fix the mouse freeze bug in 950's.
; Made the startup port be the one that Boot3 expects as defined
; in the BootGlobals.
; <SM55> 10/18/92 CCH Added a nop to flush pending writes and a RAM Disk on PDM.
; <SM54> 10/12/92 RB Exclude 040 specific code from the LC930 1 Meg ROM build.
; <SM53> 10/7/92 CSS Fixed so only non-cyclone machines will load the SoundDriver which
; is now back in ROM. This is a hack to get the sound volume on Quadra to
; work.
; <SM52> 10/6/92 RB Added the ROMinRAM conditional to avoid RESET when buidling a
; ROM that will be copied to RAM in order to do testing. Killed
; the register to use with some of the BIG macros, since the
; macros have been updated for 68020's.
; <SM51> 10/5/92 PN Fix MacII si booting process with InitROMVector after InitMMU
; <SM50> 10/2/92 PN Set 32bit mode in PRAM
; <SM49> 9/18/92 kc Change InitVectors to InitRomVectors. Change short branches to
; long branches.
; <SM48> 9/8/92 chp Install default primary SCC interrupt handlers as soon as the
; PSC dispatch table is set up on Cyclone, and enable SCC
; interrupts once and for all. InitSCC rewritten to remove
; unnecessary code left over from pre-ADB Macs.
; <SM47> 8/26/92 kc Roll in Horror changes.
; <H9> 7/13/92 GMR Now initialize ExpandMem before InitADB so we can initialize the
; CrsrDev stuff when InitADB is called.
; <H5> 2/12/92 SWC Added a call to InitCrsrDev in InitCrsrMgr so that the new mouse
; acceleration stuff can be installed. Moved call to InitCrsrMgr
; to just after ExpandMem is initialized since the CrsrDev stuff
; keeps its globals there.
; <SM46> 8/26/92 PN Set SoundBase global to a safe location since it is no longer
; valid. Apps that write to this address will safely write to
; ROM.
; <SM45> 8/19/92 CSS Update from Reality:
; <72> 8/18/92 DTY Change the name of BootGlobs to StartGlobals to avoid confusion
; with BootGlobals, which is used by the boot code in Boot[1-3].a.
; <SM44> 8/17/92 CCH Extended universal support to 96-bits.
; <SM43> 08-11-92 jmp Added ReAnimator support for Õ030 CPUs (taken straight from
; HORROR).
; <SM42> 8/9/92 CCH Added conditional StartPC address for Smurf cards.
; <SM41> 7/28/92 WS Init DSP now use gestaltRealtimeMgr instead of checking the box
; flags
; <SM40> 7/27/92 RB The ExpandMem record should be allocated just after we have a
; System heap. When the resource Manager is called some of its
; routines use the ExpandedMem record, which was being allocated
; way after many things called the Resource Manager. Main bug
; fixed was trashing SCCRd for the serial drivers.
; <SM39> 7/24/92 RLM move initGestalt before InitIOMgr, this allows lockmem calls
; from initNewAge, note GetEDiskSize in initGestalt no longer
; requires the drivers to be installed, also InitSCSIMgr comes
; after InitIOMgr per Pauls request
; <SM38> 7/15/92 JDB Removed the code to install the SoundInput driver (it was
; commented out and unnecessary).
; <SM37> 7/9/92 RB The Sound Manager was not working right on the Quadras because
; the routine to enable the interrupts from the old Sound Manager
; needed to be called and it wasnt.
; <SM36> 7/7/92 RB Added back a call to INITIALIZESOUNDMGRCOMMON from the sound
; manager for sound input.
; <SM35> 7/6/92 RB Put back InitSndDispatch and InitMACEDispatch because Jim says
; we need them after InitSoundMgr.
; <SM34> 6/29/92 RB Removed the old calls to initialize the sound manager and
; replaced it with a new call, InitSoundMgr for the new new sound
; manager.
; <SM33> 6/25/92 kc Do what I said I did last time.
; <SM32> 6/25/92 kc Disable the data cache on Cyclone until after InitSlots. This is
; to work around a bug in MMC that will be fixed in EVT4. The
; problem is caused when MUNI asserts TEA and another buss master
; starts a transation befor MMC times out. The new MMC will watch
; for TEA as well as TA for cycle termination.
; <SM31> 6/25/92 PN Put in init routine for WindowMgr to allocalte an extend memory
; varialble
; <SM30> 6/25/92 ejb Add code to initialize RTSnd (DSP Standard Sound). Added and
; disabled code to install RTSndIn (DSP Sound Input Driver).
; <SM29> 6/24/92 chp Use different SERD resource with PSC to enable DMA Serial
; Driver.
; <SM28> 6/22/92 kc Added call to INITVECTORS.
; <SM27> 6/22/92 ejb Re-enabled DSPManager for EVT2 Cyclones. Added branch to
; DSPDriver initialization just before Sound Manager stuff.
; <SM26> 6/20/92 ejb Completely disabled RTMgr initialization for all EVTx units
; until RTMgr rev'd to BOMII d12.
; <SM25> 6/18/92 RB Added a compile time conditional to ¥ temporarily not open the
; DSP (RealTime Manager) on Cyclones other than EVT1 Cyclone.
; <SM24> 6/15/92 RB Caches should be disabled on Cyclone only during development.
; <SM23> 6/12/92 PN Roll in patchIIciROM.a. Check for PowerBook140 and set the
; boxflag
; <SM22> 6/10/92 JSM PatchMDJGNEFILTER is now MDJGNEFILTER.
; <SM21> 6/1/92 RB ¥ Temporary: Do not open the NewAge driver on Cyclone since it
; frezzes the machine.
; <SM20> 5/28/92 kc Hack DrawBeepScreen.
;ÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊ¥¥¥ÊWe need to Roll in the WindowMgrPatch file from Horror ¥¥¥
; <SM19> 5/28/92 CS Call to Open the video driver needs to be added.
; <SM18> 5/28/92 kc ¥¥¥ Kill the caches for ROM bring up. ¥¥¥
; <SM17> 5/27/92 CS Fix problem with label @noMMC jumping backwards. Need to change
; name as it exists in this scope.
; <SM16> 5/24/92 RB Making Cyclone changes...Updated some of the old comments which
; seemed to have been cut-off by some tool. Call EgretDFACandPDM
; from the Pandora roll-in instead of QuadraEgretChanges. Added
; code that installs the DSP Manager at runtime after checking for
; Cyclone. Initialize dbLite docking bar and scsi disk mode. Check
; for LCD screens instead of PowerBook 170 boxflags. Added New Age
; driver installation code. Deleted some old SE30 patch.
; ¥¥¥ LCDScreenChk, SCSIDiskMode commented out temporarily.
; <SM15> 5/23/92 RB Changed a bsr to bsr.l, also made the SuperMario ROM release id
; field a word, so I had to change its location.
; <SM14> 5/22/92 FM Turned off vectorization temporarily
; <SM13> 5/21/92 RB Defined the location for the SuperMario ROM version which will
; be used to determine which vectors to load from disk.
; <SM12> 5/21/92 kc Append "Trap" to the name of DTInstall to avoid name conflict
; with the glue.
; <SM11> 5/16/92 kc Roll in Horror changes. Comments Follow: ¥ÊFrom StartInit.a ¥
; <H7> 4/8/92 SWC Modified InitHiMemGlobals to force BufPtr to be at least
; "bufWorldSize" bytes (currently 8K) below the top of RAM so
; Macsbug won't load into [DBLite's] sound buffer and get trashed
; when a sound is played.
; <H6> 2/19/92 JC Define PatchFlags in unused byte of ROM header ($0014).
; <H5> 2/12/92 SWC Added a call to InitCrsrDev in InitCrsrMgr so that the new mouse
; acceleration stuff can be installed. Moved call to InitCrsrMgr
; to just after ExpandMem is initialized since the CrsrDev stuff
; keeps its globals there.
; <H2> 9/10/91 CMP Overpatched InitIWM to handle SWIM2 chip
; ¥ÊFrom PwrControlsPatches.a ¥
; <H14> 4/24/92 HJR Provided Econo-Mode support for Niagra.
; <H10> 3/16/92 SWC Added support for 33MHz MSC systems to CheckEconoMode.
; <H9> 2/21/92 HJR Modified check sleep to use new ram locations instead of
; obsolete VRam space.
; <H8> 2/10/92 HJR Fix a bug where we are returning from a BSR6 without setting the
; return address in A6.
; <H7> 2/7/92 SWC Modified the CheckEconoMode code to lookup the correct base
; Power Manager PRAM address from the primitives tables.
; <H6> 1/24/92 SWC In CheckEconoMode, do both econo-mode setup and chip
; configuration for the MSC case.
; <H2> 8/8/91 SWC Added import of USTPMGRSendCommand and modified the econo mode
; code to use it instead of sending the bytes discretely.
; Universalized the ADB code so that it supports interrupts on CA2
; and PMGR auto-polling for DB-Lite. Fixed PortableCheck so it
; handles the case when VRAM doesn't retain power across sleep
; (state saved in PMgrGlobals). Added EnableSCSIIntsPatch so we
; won't enable SCSI interrupts on DB-Lite.
; ¥ÊFrom StartInitPatch.a ¥
; <H7> 12/18/91 SWC Modified InitSWIM2 to check for the existance of registers as
; well as doing a bus error check since the final MSCs in DB-Lite
; don't generate a bus error if the chip isn't there.
; <H5> 10/30/91 SWC Added a check to InitSWIM2 to first check if the chip is even
; installed (bus error) to support DB-Lite where the SWIM chip is
; on an external board that may or may not be connected at startup
; time.
; <H2> 9/11/91 CMP Added InitSWIM2 to support SWIM2 chip.
; <SM10> 4/22/92 RB Added a call to vector initialization routine of the Window
; Manager, which is temporarily vector $2000. This is for
; experimentation.
; <SM9> 4/15/92 RB The 040 BlockMove was fixed almost immediately after I broke it.
; So I am re-enabling that code back. Removed the bullets in
; comment in <SM3> so that we know it's been taken care of. Also
; re-enabled 040 caches.
; <SM8> 4/14/92 kc Remove call to BTreeInstall.
; <SM7> 3/24/92 PN Add new soundmgr init into the existing soundmgr initialize
; routine. Disable 040 caches.
; <SM6> 3/4/92 kc Remove the 7.0 manager initialization calls.
; <SM5> 3/4/92 PN Adding a vector for InstallMgr
; <SM4> 3/4/92 kc Add call to _InitFS and comment out call to the install TimeMgr
; patch.
; <SM3> 3/4/92 kc Rearange the ordering to get around interdependencies. Added the
; code from StartBoot.a that initializes the managers
; We need to fix the 040 BlockMove
; <SM2> 2/12/92 RLM Roll in PatchMDJGNEFILTER PatchProc.
; ¥ Pre-SuperMario Comments Follow ¥
; <71> 1/30/92 KC (Really JSM) Change low byte of ROMVersion to $7D just to be
; really different from $067C.
; <70> 1/27/92 KC Fix bug in cpu test (change blt.s to bne.s).
; <69> 1/27/92 KC Remove call to InitNonMMU, and added runtime cpu check in
; SwitchMMU.
; <68> 1/23/92 KC Roll in Zydeco patches from StartInit.a and StartInitPatches.a
; From StartInit.a and StartInitPatches.a
; {30} 5/31/91 djw (for SWC) Call InstallSonyDriverPatch (StartInitPatches.a) to
; check for the existence of either an IWM/SWIM or SWIM IOP before
; installing the floppy driver (for systems without floppy
; drives).
; From Zydeco StartInitPatches.a: (original comments were missing)
; Added hasEDisk and forRomulator conditionals.
; Removed call to InitOverPatch and InitVidGlobals.
; Removed InitVidGlobals stub.
; Rolled in OpenNetBootPatch and EDiskPatch2 and ConfigureRAMPatch.
; Changed WhichCPU to use the data instead of instruction cache.
; Added code to check location of boot globals in InitHiMemGlobals.
; Added InitNonMMU and CheckForEgretOrCuda and call to
; InitEgretAlt which were deleted in last revision.
; Moved call to GetPRAM to before the call to InitMemMgr.
; Added call to InitMemoryDispatch, InstallPrivTrap, InstallFPSP and InitNonMMU.
; <67> 1/15/92 KC Fix comment from last checkout.
; <66> 1/15/92 KC Resolve BootGlobals name collision caused by moving the
; BootGlobals record into BootEqu.a (changed BootGlobals to
; BootGlobalsSize & QDBootGlobals to QDBootGlobalsSize).
; <65> 1/3/92 RB Install an optimized BlockMove for 68040 based CPUs.
; <64> 12/31/91 RB Use RAMConfigBase only on HcMac
; <63> 12/30/91 RB Need to export INITSNDNORAM since the new boot beep code calls
; it.
; <62> 12/29/91 RB Removed the implementation of ElsieTranslate24to32 since it is
; in a QuickDraw file too.
; <61> 12/27/91 RB Open backlight driver on machines with Power Mgr.
; <60> 12/27/91 RB Added Terror changes.
; <59> 11/16/91 DTY Replacing hard addresses with a record to make the equates Òmore
; universalÓ is nice but useless if the code has no way of getting
; to those addresses any more. Add equates for VidRAMSleepFlag
; and VidRAMWakeVect to this file to keep the ROM build building
; until the hardware guys figure out what theyÕre trying to do.
; <58> 10/17/91 JSM Get rid of all the stupid conditionals.
; <57> 10/2/91 JSM Use MemoryMgrPriv.a instead of HeapDefs.a.
; <56> 10/1/91 JSM DonÕt use onMvMac conditional, Modern Victorian never existed.
; <55> 10/1/91 JSM DonÕt use hasADB conditional, all future ROMs will support ADB.
; <54> 10/1/91 JSM DonÕt use eclipseDebug.
; <53> 9/30/91 JSM DonÕt use is32BitClean conditional, all future ROMs will be.
; <52> 9/27/91 JSM DonÕt use hasCQD conditional, all future ROMs will have color
; QuickDraw.
; <51> 9/16/91 JSM Cleanup header.
; <50> 6/12/91 LN Changed #include 'HardwareEqu.a' to 'HardwarePrivateEqu.a'
; <49> 5/21/91 gbm Nail a couple of warnings
; <48> 12/7/90 dba Institute dead-code stripping.
; <47> 10/22/90 JJ Rex V8: Change VISAChipBit to V8ChipBit.
; <46> 9/24/90 BG Changed the code at the very very start of the ROM that
; determines whether or not the CPU involved is an 040. The code
; first used the 040 Data Cache Enable bit in the CACR <19>, but
; that was switched when earlier versions of the 040 died
; immediately upon turning on the data cache. However, the correct
; bit to use is the data cache enable bit, and this mod. switches
; back to using that. Also changed various ugly raw constant
; references of bits set/tested/etc. in the CACR to symbolic
; constants defined in HardwarePrivateEqu.a.
; <45> 9/19/90 BG Removed various 040-related kludges. 040s are behaving more
; reliably now.
; <44> 9/14/90 MSH Put in a fancy new universal check for wake from sleep (ok, its
; not really elegant, you got a better idea?).
; <43> 9/1/90 BG Updated to handle Eclipse EVT1 board. Specifically - Egret
; lowmems were only initialized if the Universal tables say that
; we have ADBEgret. We also needed to initialize them if we have
; ClockEgret.
; <42> 7/4/90 CCH Added check to SetupHiMemGlobals to move bootglobs if its above
; ROM (when ROM is in RAM) and added a check that skips SCC
; initialization if running from RAM.
; <41> 7/3/90 BG Turn off 040 caches if we*re running from RAM.
; <40> 7/2/90 jmp Made no changes, accidently checked out file.
; <39> 6/28/90 BG Rolled in changes for Eclipse/040.
; <38> 6/12/90 NC Add the calls to init all the Sound I/O Manager stuff correctly.
; <37> 5/8/90 JJ Added code to disable the MemoryDispatch trap if the machine has
; no MMU or has an HMMU.
; <36> 5/3/90 GMR ConfigureRAM now merges contiguous RAM chunks into a single
; chunk.
; <35> 5/1/90 DAF Removing ELSIE Huge Hack to BufPtr
; <34> 4/21/90 GMR Moved ConfigureRAM functionality to SizeMem.a, to solve problems
; with writing the chunk table before stitching occurs. Before,
; pages within a bank might swap (depending on bank size/location)
; after stitching, causing the chunk table to no longer be at the
; end of the bank.
; <33> 4/4/90 MSH Removed universal test around InitPmgrVars.
; <32> 4/4/90 JJ Temporary hack to make "special" setting of BufPtr take place on
; Elsie.
; <31> 3/29/90 MSH Added universal test for Pmgr initialization.
; <30> 3/27/90 JJ Fixed bugs in ConfigureRAM code for VISA II.
; <29> 3/23/90 JJ Replaced VISA I code in ConfigureRAM with code for both VISA I
; and VISA II.
; <28> 3/22/90 JJ Change reset vector to begin execution in overlay ROM space
; rather than actual ROM space.
; <27> 3/22/90 MSH Changes to clock.a require small modifications to the PRAM
; calls.
; <26> 3/21/90 SS Removed the Egret initiatlization code. I moved it into
; USTStartUp.a after the RAM tests.
; <25> 3/13/90 GA Added a call to Egret to Stop AutoPoll and one second interrupts
; prior to running Diagnostics.
; <24> 2/28/90 JJ Added code to install ElsieTranslate24To32 routine as the
; Translate24To32 trap on machines with VISA decoders.
; <23> 2/28/90 GMR Changed Egret run time checks to use new equates.
; <22> 2/20/90 CCH Updated some comments.
; <21> 2/20/90 CCH Added routine to configure Orwell memory controller to
; ConfigureRAM.
; <20> 2/19/90 NC Put in initialization calls to the 7.0 Sound Manager if on a
; machine with Egret. THIS WILL CHANGE WHEN A REAL FLAG IS
; AVAILABLE!
; <19> 2/16/90 BG Modified cache testing and enable/disable instructions not to
; use the 040 data cache since it is non-functional in the current
; rev. of the 040 silicon. Switched usage of DE to IE in places
; where it matters.
; <18> 2/11/90 GA Added endwith to with statements inside hasEgret conditionals
; <17> 2/9/90 BG Added code to enable 040 caches.
; <16> 2/9/90 JJ VIA CPU ID bits $1110 assigned to Elsie. Modified InitSCC to
; avoid addressing location 1 below SCC base address. SCC reset
; now done by sending $C0 command to SCC. Add routine for VISA
; decoder to ConfigureRAM. Force result of CompBootStack to be
; even.
; <15> 2/4/90 CV HwCfgFlags gets read from d2, not from the universal tables.
; With an optional FPU, the table may not have the correct value.
; <14> 2/4/90 GA Added Calls to InitEgret and conditionals with Universal runtime
; checks.
; <13> 1/15/90 BG Corrected the enabling the of the instruction cache in WhichCPU.
; Also modified comments in WhichCPU, SwitchMMU to reflect
; reality.
; <12> 1/14/90 GGD NEEDED FOR ZONE-5: Changing the order of reset/mmu disable at
; start time to prevent possible double bus errors on machines
; with overlay bits. Also fixed a few bugs in the 040 detection
; code.
; <11> 1/11/90 CCH Added include of ÒHardwarePrivateEqu.aÓ.
; <10> 1/10/90 BG Updated WhichCPU to recognize 040s.
; <9> 1/9/90 BG Change StartBoot to be run-time detection of 040s instead of
; assembly-time for universality.
; <8> 1/8/90 BG Changed the code at StartBoot so that it does the correct thing
; for the 040. Unfortunately, this is an assembly-time change
; (for now) because the way you deal with the TC register is
; radically different than on the 020/030, and the 040 CACR looks
; and acts differently than the 020/030.
; <7> 1/6/90 BG Updating MMU- and Cache-related code to work correctly on the
; 040. This is assembly-time conditionalized for now but will be
; changed to Runtime checking later (where possible).
; <6> 1/4/90 BG Adding MACHINE MC68040 directive into the SETMACHINE macro. This
; will only be invoked if CPU = 040, a condition no one should be
; seeing unless you do a -Mac040- build.
; <5> 12/27/89 SWC Forgot to include a "WITH DecoderInfo" for the parity stuff.
; <4> 12/26/89 SWC Replaced "#"s with ";"s for the following comment since the
; AddChange script was messed up when this file got checked in.
; <3> 12/26/89 SWC Setup FMC configuration to do the right thing for both parity
; and non-parity systems.
; <2> 12/21/89 CCH Fixed up comment header.
; <11.7> 11/28/89 SWC Removed references to FMCRev2 since Zone 5 has the final version
; of its memory controller.
; <11.6> 11/15/89 GMR NEEDED FOR ZONE-5. Added call to EnableParityInts that sets the
; OSS RPU's mask reg to level 7 if the RPU is present.
; <11.5> 11/10/89 MSH Rolled in support for both black fill and white fill for hcmac
; NTSCmode.
; <11.4> 10/31/89 PWD Restore stack pointer after checking if the netBoot driver is
; there before _Opening it.
; <11.3> 10/31/89 MSH Took the conditional assembly of TEGlobalInit out, now always
; assembles. Changed
; <11.2> 10/31/89 PWD Added net booting. Just Opens the driver after the .Sony driver.
; <11.1> 8/23/89 SES Temporarily add MBProcHndl to this file until all nfile
; references in all sources are removed. Once nFiles are removed,
; MBProcHndl should be put into ToolEqu.a.
; <11.0> 8/22/89 SES Removed references to nFiles. Changed include DeclRomEqu.a to
; RomEqu.a.
; <10.9> 8/22/89 GMR Removed RunDiags, always call universal StartTest diags now.
; Prep A2 with VIA1 base before calling quasiPwrMgr when reading
; RamDisk size, to work with universal RdXByte.
; <10.8> 8/16/89 BBM made EDisk open on feature ÒhasEDiskÓ, rather than the hack
; onHcMac.
; <10.7> 7/27/89 CCH Fixed _real_ bug that was trashing a4 in configureRam, and
; restored fixAddr.
; <10.6> 7/27/89 CCH Fixed bug in fixAddr that was using address of bank B as it's
; size.
; <10.5> 7/25/89 CCH Modified configureRAM for glue chip and FMC based machines to
; adjust universal info pointers and return address on stack if
; their addresses change as a result of setting memory size bits
; when forRomulator flag is set.
; <10.4> 7/17/89 GGD Fixed comment from last change, added call to InitOverPatch.
; <10.3> 7/16/89 GGD NEEDED FOR AURORA: Modified the Reset PRAM key sequence to
; preserve the Reliability manager PRAM bytes, but invalidate all
; others.
; <10.2> 7/14/89 djw NEEDED FOR AURORA: Removed getting warmstart in initslots - now
; done in startsdeclmgr.
; <10.1> 7/14/89 SWC NEEDED FOR AURORA: Changed CACR setup so that bursting is
; disabled only on F-19s with old FMCs.
; <10.0> 7/13/89 GGD Added check for Cmd-Opt-R-P keys at boot time to Reset PRAM, in
; case PRAM contents prevents booting for some reason.
; <9.9> 7/8/89 CCH Modified to work with Romulator.
; <9.8> 7/6/89 GGD Un-Proc'd WriteSCC because code falls into it, and alignment
; would screw it up. Changed the FMC rev 1 vs 2 code to produce
; code that is the same size in both cases. Added some padding for
; overpatching.
; <9.7> 7/5/89 CCH Added ROM build version to ROM Header.
; <9.6> 6/30/89 rwh handle memory sizes not supported by hardware on FMC, GLU
; machines.
; <9.3> 6/30/89 CSL initialize new low mem LockMemCt to zero. Also removed
; Dispatcher vector from Foreign OS vector table
; <9.2> 6/30/89 smb NEEDED FOR AURORA: Added call to TEGlobalInit for TE vectors
; stored in ExpandMem.
; <9.5> 6/30/89 DAF Added additional error checking to gamma loading routines to
; prevent allocation of garbage on cards w/o gamma directory
; <9.4> 6/30/89 CSL Fixed bug in SysHoleheap, field for cMoreMasters should be size
; word, not size long. and put conditional around TEGlobalInit to
; exclued HcMac.
; <¥9.5> 6/30/89 DAF Overriden again! There wasn't enough room on Reality to submit
; before!
; <¥9.5> 6/30/89 DAF Override submission because of network problems
; <9.1> 6/29/89 rwh Needed for AURORA: handle Bank B size > bank A for glu chip
; machines. Marked 9.0 changes.
; <9.0> 6/28/89 rwh NEEDED FOR AURORA: moved MMU switch code to Foreign OS table.
; Cleaned up comments near start for the BootGlobals way.
; <8.9> 6/27/89 rwh NEEDED FOR AURORA: changes to get FMC rev 2 working. Removed
; RoundUp of screen buffer sizes, since we wrap before AND after
; video buffer now. Changed error codes in CheckSize, but still
; need equate!
; <8.8> 6/26/89 GMR Exported StartTestFlags.
; <8.7> 6/20/89 SWC Replaced immediate constant with lomem variable for HcMac in
; DrawBeepScreen.
; <8.6> 6/16/89 SWC Save and restore registers around ValidatePRAM call.
; <8.5> 6/16/89 CSL Moved ValidatePRAM to after StartTest.
; <8.4> 6/15/89 SWC Added a call to ValidatePRAM (Clock.a) to make sure PRAM's got
; good stuff in it.
; <8.3> 6/13/89 DAF Moved routine which calculated dead macÕs top left corner inline
; into StartFail.a
; <8.2> 6/12/89 rwh corrected comment in FixAddr. Fixed setting of Glu size bits in
; ConfigureRam. Added register usage comments in ConfigureRam.
; Fixed booting in 24 bit mode w/>8mb RAM. Made InitSlots switch
; to 32 bit mode to access BootGlobs.
; <8.1> 6/12/89 djw Added universal slot zero pram support in GetRBVSize. GGD got
; Mac SE Rom in Ram working again.
; <8.0> 6/11/89 GGD Updated to use new Video, hwCfgFlags, and ROM85 info from
; Universal Rom tables.
; <7.9> 6/11/89 GMR Added call to universal StartTest diagnostics, in place of
; 'fake' diags.
; <7.8> 6/11/89 GMR Added some BIG Jmp/Jsr's to fix link errors. Fixed initNonMMU to
; handle bad RAM disk size.
; <7.7> 6/10/89 GGD Updated box flag names.
; <¥7.6> 6/10/89 SWC Initialized screen dimension lomems for Mac Plus/SE so that they
; can be used consistently on all machines. Fixed a bug in
; SetupHWBases (wrong bit tested). Always include ColorEqu.a
; (instead of conditional on hasCQD). Got rid of TestInRAM and
; associated code at StartBoot. Initialize BootGlobPtr on all
; machines so that the warmstart flag can be saved. Moved
; InitPmgrVars to PoweResourceMgr.a. Fixed a bug in InitNonMMU: A6
; was getting trashed. Bad dog, rwh!
; <7.4> 5/31/89 rwh removed some orphan code from ConfigureRam (sloppy!)
; <7.3> 5/30/89 DAF Updated InitDefGamma to use the card ROM's gamma directory if
; present
; <7.2> 5/30/89 rwh made ConfigureRam set up 'offset to top of bank' field in boot
; globals, and put stack halfway thru 1st bank of RAM. Change
; InitNonMMU to get at RAM chunk table using a6 instead of sp.
; Fixed conditional around import from change 7.1.
; <7.1> 5/30/89 CSL moved code to enable external cache to HWPriv.a and called the
; routine. Changed RunDiags to not run Aurora diags on NuMac
; machines.
; <7.0> 5/29/89 GGD Added runtime test to InitIWM to only call it if an IWM/SWIM
; exists. Added the ROM version number for all 32 bit universal
; roms. ($7C same as Aurora) Added check to see if StartTest
; matches machine we are running on, and only run it if there is a
; match. Added a fake StartTest for all other cases, which just
; beeps and sizes memory for now. Converted to a few more feature
; base conditionals. Removed the Alternate Diag Rom check for
; 020/030 machines, since it couldn't possibly work, and we were
; just branching around it. Added temporary runtime check for F19,
; to not enable bursting. Added call to SCCIOPHwInit in InitSCC
; for IOP based machines. Added special case runtime test for the
; SE30 only to undo the patching that the SE30 video driver Open
; call installs to the Sony Driver ICON information.
; <6.9> 5/26/89 rwh oops! never added call to ConfigureRam!
; <6.8> 5/26/89 rwh added Reliability Manager. Moved ConfigureRam from MMU.a to
; here, w/ggd's changes from version 2.3. Improved field names in
; BootGlobs, replaced FixMeLater's w/ BootGlobPtr's. Changed
; CompBootStack, SetUpSysAppZone to handle 'black hole' before
; system heap. Fixed bug in InitHiMemGlobals's clip of memory at 8
; meg for 24 bit mode.
; <6.7> 5/26/89 GGD Added some BIG Lea/Jsr to fix link errors.
; <6.6> 5/22/89 GMR Added InitNonMMU routine, to setup registers [a4-a6] so builds
; will run on hcMac and MacPP again.
; <6.5> 5/20/89 GGD Changed SetupHWBases to initialize SCCrd/wr, and IWM, using
; table info, since the IOP base addresses now point to the bypass
; mode register base. Changed conditional on parity code to allow
; IoMac to build again. Added universal support to the IOP manager
; initialization routine.
; <6.4> 5/16/89 rwh fix GetRBVsize - coupla missing lines 'o code
; <6.3> 5/16/89 rwh Added code to enable external cache on MDU based systems (ggd).
; Removed call to BootBeep, Start test does it now. New GetRBVSize
; courtest dave fung. Changed many bsr's to BigJsr's to fix link
; errors. Added save of parity enable state on via across call to
; InitVias. Put stack in middle of 1st bank before calling
; InitMMU. Deleted calls to RamTest, as all memory testing now
; done in Start Test. Added MMU switch sky hook for Pink & A/UX.
; Removed ALL Ramtest calls, Start Test tests all of RAM now. For
; csl, when in 32 bit, change Translate24to32 to an rts.
; <6.2> 5/15/89 GGD Saved and restored A5 around call to BootBeep, to fix MacPP
; builds. Removed the procedure InitADBVars, which is now done as
; part of InitADB.
; <6.1> 5/14/89 rwh fixed bad MACHINE directives for 68000 builds
; <6.0> 5/14/89 rwh changes for universal MMU setup: call InitMMU instead of
; MapAddress. With boot globals, can save & restore less
; information around various RAM tests.
; <5.9> 5/10/89 CCH Added test for Mac II's when running in RAM that will give
; GetHardwareInfo a hint that it's running on an 020 machine, so
; it will not twiddle VIA bits which turn off the MMU. Also figure
; out memory size in startinit when running out of RAM.
; <5.8> 4/30/89 GGD Implemented new improved table driven, universal, SetupTimeK
; routine. Reworked InitSlots to remove calls to routines that
; were eliminated from SIntCore. Removed hardware dependencies,
; and called universal routines to enable and disable various
; interrupt sources. VIA and hardware base initialization are now
; done using universal ROM tables and routines The Low memory
; globals for hardware base addresses are now kept updated
; throughout StartInit, to allow routines to be more universal.
; WhichBoard now uses universal rom information. WhichCPU
; completely re-written to not use low mem exception vectors.
; Changed MapAddress to preserve some registers across the call,
; and re-arranged some of the registers that is uses to abtain
; that. Added call to JumpIntoROM to find the ROM and machine
; info. Removed old test for hard reset.
; <5.7> 4/28/89 CSL Initialized Phys2Log for Physical to logical convertion value
; for MMU table. PhysicalRAM and SystemRAM is renamed to
; PhysMemTop and RealMemTop.
; <5.6> 4/27/89 CCH Added changes to make Romulator work.
; <5.5> 4/24/89 MSH Gave everyone but Mac Plus the latest SCC init table data.
; <5.4> 4/18/89 CCH Added changes for Rom in Ram to work.
; <5.3> 4/17/89 CSL Added 2 vectors for A/UX, for Dispatcher and StartSDeclMgr, also
; initialize two new lo mem PhysicalRAM and SystemRAM.
; <5.2> 4/14/89 GMR Disable ADB interrupts in BootRetry. Later InitADB is called to
; set up the handler and re-enable them.
; <5.1> 4/13/89 MSH InitPmgrVars uses a new power manager command ($21) to clear ADB
; autopolling.
; <5.0> 4/13/89 GGD Changed OSS interrupt mask initialization to use new names from
; hardwareEqu. Added initialization of new VIA2RBVOSS lowmem, and
; changed various routines to get base addresses from memory
; instead of using absolute addresses. Started converting to
; feature based conditionals. Made Foreign OS tables available on
; all CPUs. Cleaned up comment and code for the 4 bit CPUID field
; extraction.
; <4.9> 4/7/89 MSH InitPmgrVars disables auto polling, loads pmgr interrupt
; handlers, and enables pmgr interrupts. Also backed out change
; 4.8. StartTest will clear warmstart if a hard reset ocurred.
; <4.8> 4/4/89 SES Added check for PwrMgr reset on HcMac. If PwrMgr reset occurred,
; then Ram test is run regardless of warmStart value.
; <4.7> 4/3/89 MSH Clear MMUType if no mmu exists. This area needs work to support
; all combinations of MMUs, processors, and accelerators.
; <4.6> 3/31/89 SES Added some BigJSRs & BigLEAs for IoMac & MvMac.
; <4.5> 3/31/89 MSH Made battery monitor into sound monitor vbl task.
; <4.4> 3/28/89 SES Moved MapAddress above first call to RAMtest. For hcMac, hafMac
; and mvMac StartInit is once again making the calls to RAMtest,
; but BootBeep is still called in StartTest.
; <4.3> 3/24/89 CCH Added RomLoc location in Rom Header to hold information on where
; ROM is executing from (i.e. Ram, Emulator).
; <4.2> 3/22/89 CSL Turn on Burst mode for I/D cache, also ROMmap is now a 32 bit
; heap, also fix slimy RockWell VIA bug by saving output reg. A in
; WhichBoard routine. New code to replace SwapMMUmode with
; SwapMMU32only for pure 32 bit only addressing.
; <4.1> 3/14/89 MSH Added Esprit ASIC register init that was pulled for starttest.
; <4.0> 3/9/89 MSH Updated an equte in init pmgr vars.
; <3.9> 3/6/89 GGD Modified InitIWM to force SWIM chip to switch into IWM mode to
; prevent looping if SWIM did not get reset properly (HcMac does
; not do a RESET on restart, and has problems) Added deferred task
; manager for onMacPP. Moved InitXVectTables to
; InterruptHandlers.a, and renamed it InitIntHandler. Added
; conditional support for Ram based onMacPP rom image. Added an
; extra entry in the ROM header for HiRam to use to insert the ROM
; Size. Contimued effort to make the ROM position independent,
; allowing for an initial PC that assumes the ROM is mapped to
; zero at start time, and the jumps into the real ROM space.
; Changed RBV register usage now that equates are offsets from
; RBVBase, instead of being absolute addresses.
; <3.8> 3/3/89 CCH Now initializes expandMem and Gestalt.
; <3.7> 3/3/89 MSH Initialize LastAct and LastHd to 1.
; <3.6> 3/2/89 jwk Adding "BigJSR INITADB" so that IoMac will build.
; <3.5> 3/1/89 MSH Cleaned up topanga support.
; <3.4> 2/28/89 CSL Added support for 32 bit clean memory manager.
; <3.3> 2/27/89 CSL changed RBV on board video from slot E to slot 9 for DVT and
; later machines.
; <3.2> 2/21/89 CSL changed movea to movea.l in MapAddress.
; <3.1> 2/16/89 rwh added support for Fitch Memory Controller rev 1, which has a
; split memory model like MDU. WHen FMC2 arrives (contiguous
; memory), remove these changes. Removed conditionals for
; non-working Vias.
; <3.0> 2/16/89 SES Jumped around the remaining Ram test for hafMac. Will revisit
; later.
; <2.9> 2/14/89 SES Jumped around a memory test and bootbeep for HafMac since they
; are currently being done by the StartTest files.
; <2.8> 2/14/89 rwh made some lea's & bsr's into BigLea's and BigJsr's to fix link
; problems. Fixed
; <2.7> 2/10/89 rwh Oops! Appletalk checks for ROM version ³ 76 for presence of
; Start Manager (with
; <2.6> 2/9/89 CCH Made version numbers of HafMac, HcMac, and MvMac all $01, since
; this is the first iteration of each ROM.
; <2.5> 2/8/89 SGS Added support for SCC IOP
; <2.4> 2/8/89 MSH dded support for Topanga video interface converter. NTSC
; monitors require a narrowed
; <2.3> 2/6/89 rwh Fix MapAddress: on 4Mb 4Square, 1st entry in 1st level 32 bit
; mode table 2nd
; <2.2> 1/30/89 cv Added Spin as a CPU type
; <2.1> 1/28/89 GGD Added scratch register to new BigLEA/JMP/JSR macros to be
; position independent. Fixed assembly error, and logic errors in
; Mac II class board id routine.
; <2.0> 1/25/89 rwh rewrote parts of WhichBoard to generalize for newer 4 bit id
; machines. Fixed two bugs in MapAddress for MDU machines w/o
; onboard video.
; <1.9> 1/23/89 CSL put conditional around setting MMU24Info
; <1.8> 1/23/89 CSL Initialize MMU24Info to point to the physical address of the MMU
; table
; <1.7> 1/20/89 CSL Generate MMU tables for any RAM configurations, for both 24 bit
; and 32 bit mode.
; <1.6> 12/15/88 GGD Added initialization of TimeVIADB and VIA2RBV low mems.
; <1.5> 12/14/88 MSH Changed VIA interrupts to be independent active negative edge.
; <1.4> 12/13/88 rwh added startup of IOP Scc in InitSCC. Must be done before
; calculating TimeSccDb. Even though IOP is in bypass at reset,
; timing differs when it is running.
; <1.3> 11/23/88 rwh Added cache enables after last call to RamTest.
; <1.2> 11/17/88 GGD Deleted code for InitDispatcher and BadTrap, they are now
; located in Dispatch.a Changed GoofyDoEject to do a BigJMP so
; that TFS code can move away some more.
; <1.1> 11/10/88 CCH Fixed Header.
; <1.0> 11/9/88 CCH Adding to EASE.
; <3.1> 11/6/88 GGD Ported to IoMac.
; <3.0> 11/1/88 MSH Moved the init of the deferred task manager out of slot init.
; Now anyone can use it.
; <2.9> 10/24/88 CSL added temporary address translation table for RBV RAM based
; screen buffer.
; <2.8> 10/7/88 rwh changed some MvMac, MMU, ADB and generic 020/030 stuff to
; feature based conditionals. Made sound, IWM base addr name
; uniform on all machines.
; <2.7> 10/5/88 CSL Added support for RBV and MDU.
; <2.6> 9/29/88 MSH Flagged time outs to be dirty when allocated so they get updated
; later.
; <2.5> 9/24/88 rwh oops - fix 2.4's missing ENDIF in non-onMvMac builds.
; <2.4> 9/24/88 rwh roll in onMvMac changes. Note that InitADB moved to after
; InitIOMgr to support Gary's IOP based ADB implementation.
; <¥2.3> 9/23/88 CCH Got rid of inc.sum.d and empty nFiles
; <2.2> 9/12/88 rwh Fix WhichBoard so it builds for onHcMac.
; <2.1> 9/10/88 rwh Roll in of Mac IIx changes: New WhichCPU routine.
; InitHiMemGlobals pegs BufPtr to 8 Meg or less. CompBootStack
; uses BufPtr, not MemTop, for ALL machines. Ensure RAM tests are
; done in 32 bit mode for >8 Meg machines. Add WhichBoard routine,
; BoxFlag global for identification of logic board. Turn off 030
; MMU at start of HW Init sequence. Remove obsolete Rev8Chk
; routine & calls to it.
; <2.0> 9/9/88 MSH Added initialization of lomem value screenbytes for hcmac.
; <1.15> 9/8/88 MSH Moved allocation and initialization of Pmgr vars. Added read of
; sleep and hard disk time outs from pram into pmgr locals.
; <1.14> 8/16/88 GGD Moved Time Manager initialization into TimeMgr.a.
; <1.13> 8/5/88 MSH Removed useless Speedometer setting
; <1.12> 6/24/88 MSH New equate used for turning off everything at end of init for
; HcMac.
; <1.11> 6/15/88 MSH Removed ram testing and boot beep, now done in StartTest for
; HcMac. StartTest returns start of RAM Disk in A5 in on HcMac.
; Use instead of MemTop. Removed the eyebrows from the startup
; gray screen.
; <1.10> 5/27/88 MSH Restored video ram test temporarily and fixed stack
; initialization.
; <1.9> 5/26/88 MSH Moved NMInit IMPORT to MyROM PROC.
; <1.8> 5/26/88 MSH Took out redundant ram testing and fixed the ASC interrupt clear
; for HcMac.
; <1.7> 5/25/88 MSH Added EDisk driver open for Laguna.
; <1.6> 5/23/88 BBM Put NMgr init code in proper place (after traps inited).
; <1.5> 5/23/88 BBM added code to initialize the Notification Manager.
; <1.4> 5/19/88 BBM Fixed reference to GNEFilter.
; <1.3> 5/16/88 BBM Use alarm code from Notification Manager. cleaned up comments.
; <1.2> 4/25/88 MSH Clear pending ASC interrupt for HcMac
; <1.1> 4/18/88 CSL Need to turn off serial drivers at end of boot. Initialize
; speedometer to 16 mhz.
; <1.0> 2/10/88 BBM Adding file for the first time into EASEÉ
;__________________________________________________________________________________________________
PRINT OFF
LOAD 'StandardEqu.d'
INCLUDE 'HardwarePrivateEqu.a'
INCLUDE 'MemoryMgrPriv.a'
INCLUDE 'SCSI.a'
INCLUDE 'MMUequ.a'
INCLUDE 'BootEqu.a' ; Must appear after MMUEqu.a
INCLUDE 'ROMEqu.a'
INCLUDE 'SlotMgrEqu.a'
INCLUDE 'Video.a'
INCLUDE 'DepVideoEqu.a'
INCLUDE 'ColorEqu.a'
INCLUDE 'UniversalEqu.a'
INCLUDE 'ReliabilityEqu.a'
IF hasEgret THEN
INCLUDE 'EgretEqu.a'
ENDIF
INCLUDE 'EDiskEqu.a'
INCLUDE 'SCSIEqu96.a'
IF hasPwrControls THEN
INCLUDE 'PowerPrivEqu.a'
ENDIF
INCLUDE 'PSCEqu.a' ; <SM16>
INCLUDE 'IOPrimitiveEqu.a' ; <SM16>
INCLUDE 'GrandCentralPriv.a'
INCLUDE 'GestaltEqu.a' ; <SM41>
INCLUDE 'GestaltPrivateEqu.a' ; <SM59>
IF hasNetBoot THEN
INCLUDE 'AppleTalk.a' ; <SM65>
INCLUDE 'AtalkPrivateEQU.a'
ENDIF
PRINT ON
BLANKS ON
STRING ASIS
;----------------------------------------------------------------
; Equates
;----------------------------------------------------------------
dsGNLoadFail EQU 20011
MBProcHndl EQU $D54 ;put it here until we're rid of nFiles
; During startup, the system heap is growable (since it masquerades in appÕs clothing). This constant
; specifies how much space we need beyond the suite of drivers and before the final size is specified.
MinSysExtra EQU 128*1024 ; was 16K <SM117> CCH & joe <SM75>
; The boot time stack size depends on quickdraw, since thereÕs no significant nesting of start routines.
; WARNING -- cross-defined in StartBoot.a
BootStackSize EQU 8*1024
; While drawing HorstÕs BeepScreen, a QD world is required just below the area where the boot blocks are
; loaded. BootGlobalsSize gives the amount below the boot blocks buffer where the stack can begin.
; QDBootGlobalsSize gives the amount above the stack that the A5 world can begin. We err on the big side
; here for slackÕs sake. For example, on a megabyte machine, MemTop is $100000. Boot blocks will arrive
; at $80000. Allowing $400 for boot globals and $190 (400 decimal) for QD globals, SP would be at $7FC00,
; and A5 at $7FD90. The utter clarity of it all!
BootGlobalsSize EQU $400 ; 1K for QD and other globals
QDBootGlobalsSize EQU $190 ; a mere 400 bytes for QD
; <60>, move this constants to hardwareprivateequ later...
nuBusTTxlat EQU $807FC040 ; nubus space $8-$F with serialized writes
;ioNuBusTTxlat EQU $403FC040 ; ROM, I/O space and nuBus $6-$7 with serialized writes <T19>
ioNuBusTTxlat EQU $500FC040 ; I/O space and nuBus $6-$7 with serialized writes <T19>
MACRO
SETMACHINE
IF CPU = 020 THEN
MACHINE MC68020
ELSEIF CPU = 030 THEN
MACHINE MC68030
ELSEIF CPU = 040 THEN
MACHINE MC68040
ELSE
AERROR 'Unknown CPU type'
ENDIF
ENDM
SETMACHINE
;---------------------------------------------------
; EXPORTs and IMPORTs
;---------------------------------------------------
; labels from other files
IMPORT BaseOfRom
IMPORT BadTrap ; Dispatch.a
IMPORT BlockMove68040 ; BlockMove.a <SM9>
IMPORT BootBeep ; BootBeep.a
IMPORT BootMe ; StartBoot.a
IMPORT CritErr ; StartFail.a
IMPORT CrsrDevHandleVBL ; CrsrDev.a
IMPORT DisableIntSources ; InterruptHandlers.a
IMPORT DispTable ; DispTable.a
IMPORT DoEject ; TFS.a
IF hasEgret THEN
IMPORT EgretDFACandPDM ; EgretMgr.a <SM16>
ENDIF
IMPORT ElsieTranslate24To32 ; QDUtil.a
IMPORT EMT1010 ; Dispatch.a
IMPORT Enable60HzInts ; InterruptHandlers.a
IMPORT EnableExtCache ; HWPriv.a
IMPORT EnableOneSecInts ; InterruptHandlers.a
IMPORT EnableSlotInts ; InterruptHandlers.a
IF hasIopSwim THEN
IMPORT EnableSwimIopInts ; InterruptHandlers.a
ENDIF
IMPORT EraseMyIcon ; StartSearch.a
IMPORT FSIODneTbl ; DeviceMgr.a
IMPORT GetExtHardwareInfo ; Universal.a
IMPORT GetHardwareInfo ; Universal.a
IMPORT InitADB ; ADBMgr.a
IMPORT InitCrsrDev ; CrsrDev.a
IMPORT InitCrTable ; CCrsrCore.a
IMPORT InitDispatcher ; Dispatch.a
IMPORT InitDTQueue ; DeferredTaskMgr.a
IF hasEgret THEN
IMPORT InitEgretOrCuda ; EgretMgr.a
ENDIF
IMPORT InitFasterInvals ; WindowMgrExtensions.a
IMPORT initGestalt ; GestaltFunction.a
IMPORT initGlobals ; SoundMgrPriv.c
IMPORT InitIntHandler ; InterruptHandlers.a
IF IopADB | hasIopScc | hasIopSwim THEN
IMPORT InitIOPMgr ; IOPMgr.a
ENDIF
IMPORT InitMemMgr ; MemoryMgr.a
IMPORT InitMemoryDispatch ; HWPriv.a
IMPORT InitMemVect ; MemoryMgr.a
IMPORT InitMMU ; MMUTables.a
IMPORT InitMMUGlobals ; MMU.a
IMPORT InitMMUTrap ; MMU.a
IMPORT InitOverPatch ; Overpatch.a
IMPORT InitPmgrVars ; PowerManager.a
IMPORT InitQueue ; Queue.a
IMPORT InitReliability ; SysUtil.a
IMPORT InitRomVectors ; VectorTableInit.a
IMPORT InitRSRCMgr ; ResourceMgr.a
IMPORT InitSCSIHW ; SCSIMgrInit.a
IMPORT InitSCSIMgr ; SCSIMgrInit.a
IMPORT InitSDTbl ; SlotInterrupts.a
IMPORT InitSndDispatch ; SoundDispatch.a
IMPORT InitSndHW ; SndPrimitives.a
IMPORT InitSndNoRAM ; SndPrimitives.a
IMPORT InitTimeMgr ; TimeMgr.a
IMPORT InitVBLQs ; VerticalRetraceMgr.a
IMPORT InitVIAs ; Universal.a
IF has040MMU THEN ; <SM91>
IMPORT InstallFPSP ; FPEmulation.a
ENDIF ; <SM91>
IMPORT InstallPrivTrap ; FPPrivTrap.a
IMPORT InstallSoundIntHandler ; SoundInterrupts.c
IMPORT JumpIntoROM ; Universal.a
IF hasPwrControls THEN
IMPORT LCDScreenChk ; PowerMgr.a
ENDIF
IMPORT MARIOBOOTSOUND ; BootBeep.a
IMPORT MDJGNEFILTER ; ? <SM22>
IMPORT MMUCleanupFor8Mb ; MMU.a
IMPORT NMGNEFilter ; NotificationMgr.c
IMPORT NMInit ; NotificationMgr.c
IF hasPwrControls THEN
IMPORT PortableCheck ; PowerMgr.a
IMPORT PowerDownAll ; PowerMgr.a <SM84>
ENDIF
IMPORT ReadXPRam ; Clock.a
IF hasIopScc THEN
IMPORT SCCIOPByPass ; IOPMgr.a
IMPORT SCCIOPHwInit ; IOPMgr.a
ENDIF
IMPORT SCSIDiskMode ; SCSIDiskMode.a <SM16><SM68>
IMPORT SetupDockBases ; DockingMgr.a
IMPORT StartSDeclMgr ; SlotMgrInit.a
IMPORT StartTest1 ; USTStartup.a
IMPORT SysErrInit ; StartErr.a
IMPORT SwitchMMU ; MMU.a
IMPORT TEGlobalInit ; TextEditInit.a
IMPORT ValidatePRAM ; Clock.a
IMPORT INSTALLBASSCOMMON ; BassExtensions.a <SM112>
IMPORT FORCEINITFONTSCALL ; BassExtensions.a <SM112>
IMPORT GetCPUIDReg ; Universal.a
IMPORT InitSys7Toolbox ; StartBoot.a
IMPORT Ck4LimitPRAMClear ; StartSearch.a
IF hasAsyncSCSI THEN
IMPORT ISITT
IMPORT INITSCSIBOOT
ENDIF
MyROM MAIN Export
EXPORT AddVidDevice
EXPORT BootRetry
EXPORT Critical
EXPORT DispOff
EXPORT InitDefGamma
EXPORT InitSCC
EXPORT OpensDrvr
; EXPORT PMSPSwOS
EXPORT RomLoc
EXPORT StartBoot
EXPORT StartInit1
; EXPORT WDCBSwOS
EXPORT TCOff
EXPORT SetUpTimeK ; <SM142>
; EXPORT DynamicBoxFlag
*************************************************************************************************
* *
* S T A R T O F R O M *
* *
*************************************************************************************************
DC.L numTbTrap+numOsTrap-1 ; [ 0] number of traps for postlinker (HiRam stuffs checksum here)
StartPC DC.L ResetEntry-BaseOfRom ; [ 4] RESET vector
ROMVersion DC.B Machine ; [ 8] machine number
; NOTE: until Appletalk changes the way it checks for existence of
; TimeDBRA, ROM version numbers must be between $76 and $7F inclusive
DC.B $7D ; [ 9] Universal, Mac II class, 32 bit machines
;---------------------------------------------------
; ROM vectors & entry points
;---------------------------------------------------
StBoot JMP StartBoot ; [ A] jump to start code for a restart
BadDisk JMP StartBoot ; [ E] eject disk, and reboot
DC.W ROMRelease ; [12] ROM release version
PatchFlags DC.B 0 ; [14] ROM overpatch basis for Horror (unused in SuperMario)
DC.B 0 ;¥[15] UNUSED
DC.L ForeignOS-BaseOfRom ; [16] offset to foreign OS vector table
RomRsrc DC.L 0 ; [1A] ROMStart -> HiRam -> offset to ROM resource header
Eject JMP GoofyDoEject ; [1E] jump to utility to eject and notify Bruce
DispOff DC.L DispTable-BaseOfRom ; [22] offset to the dispatch table
Critical JMP CritErr ; [26] jump to critical error handler
ResetEntry JMP StartBoot ; [2A] RESET entry point
RomLoc DC.B 0 ; [2E] ROM Loc (Bit 0: In Ram, Bit 1: In Emulator)
DC.B 0 ;¥[2F] UNUSED
DC.L 0 ; [30] ROM checksum byte 0
DC.L 0 ; [34] ROM checksum byte 1
DC.L 0 ; [38] ROM checksum byte 2
DC.L 0 ; [3C] ROM checksum byte 3
DC.L 1 ; [40] HiRam -> Size of ROM in bytes <SM132>
DC.L EraseMyIcon-BaseOfRom ; [44] erase the happy mac
DC.L InitSys7Toolbox-BaseOfRom ; [48] Offset to Sys 7 Toolbox init code. (used by Boot3.a & Gibbly)
DC.W SubRelease ; [4C] version number of SuperMario based ROMs <SM132>
;--- End of official ROM header --------------------
;---------------------------------------------------
; Foreign OS table - exports offsets of interesting ROM stuff to other OS's like Aux or Pink
;---------------------------------------------------
ForeignOS DC.L InitDispatcher-BaseOfRom ; [4E] initializes A-trap dispatch tables
DC.L EMT1010-BaseOfRom ; [52] A-trap dispatcher
DC.L BadTrap-BaseOfRom ; [56] handler for unimplemented traps
DC.L StartSDeclMgr-BaseOfRom ; [5A] initializes the Slot Manager
DC.L InitMemVect-BaseOfRom ; [5E] initializes the Memory Manager jump tables
DC.L SwitchMMU-BaseOfRom ; [62] MMU switch code
DC.L InitRomVectors-BaseOfROM ; [66]
;---------------------------------------------------
GOOFYDoEject
BRA.L DoEject ; branch island to eject code
STRING AsIs
DC.L 'Copyright (c) 1983-2002 Apple Computer, Inc. All Rights Reserved.'
*************************************************************************************************
* *
* R E S E T / R E B O O T E N T R Y P O I N T *
* *
*************************************************************************************************
; b4
TCOff dc.w 0 ; for turning off MMU below
Start
StartBoot MOVE #$2700,SR ; Disable processor interrupts.
RESET ; ***** Reset The World *****
; <60>, check what WakeUp does, does it return here again after changing clock ?
*************************************************************************************************
* *
* H A R D W A R E I N I T I A L I Z A T I O N *
* *
*************************************************************************************************
; bc
BSR6 JumpIntoROM ; init the hardware
move #$2600, sp
moveq #0, d7
moveq #0, d6
move #$11, d7
import LASTLY_A8FE0
BSR6 LASTLY_A8FE0
move.l (sp),a6
StartInit1 ; Jumped to from StartTest1. <C11>
;-----
; here, after running the diagnostics, we have:
;
; a6 -> memory chunk table near top of highest RAM bank found by the diagnostics.
; Each table entry is a pair of longwords giving the physical start address
; and size of a RAM bank. The table is terminated by a single longword of
; $FFFFFFFF. The end of the highest bank is 3 longwords after the terminator.
;
; For instance, a two bank Mac 2 with 4 meg in bank A and 1 Meg in Bank B:
;
; --- top of bank B ---
; <filler 3> - last longword of Bank B
; <filler 2> - next to last longword
; <filler 1> - next to last longword
; $FFFFFFFF - RAM chunk table terminator
; $00100000 - size bank B
; $04000000 - physical address bank B
; $00400000 - size bank A
; a6->$00000000 - physical address Bank A
;
; a5 -> top of useable memory, given RAM disk. This is only used on contiguous
; memory systems that support RAM disks, such as the Portable.
;
; sp -> a little bit (32k) above the bottom of the lowest bank of RAM found.
;
; vbr -> (020/30/.. only) exception vectors set up by the diagnostics at the bottom
; of the lowest bank found.
;
; On 68000 machines, exception vectors set up by the diagnostics are in RAM at address zero.
;-----
; de
WITH StartGlobals
moveq.l #0,d2 ; no hint about configuration
getHInfo move.l a6,-(sp) ; save regs <SM44>
BSR6 GetHardwareInfo ; figure out what we are running on <SM52>
movem.l d0-d1/d7,-(sp) ; save universal regs <SM44>
BSR6 GetExtHardwareInfo ; Get extended universal information
move.l 12(sp),a6 ; get pointer to bootglobs
movem.l d0-d1/d3-d4,sgScratch(a6) ; save extended info in scratch space in BootGlobs
movem.l (sp)+,d0-d1/d7 ; restore valid and ext feature flags #0-31
;-----
; Here, after running GetHardwareInfo we have:
;
; a0 - Pointer to table of base addresses
; a1 - Pointer to ProductInfo record for this machine
; d0 - Flags indicating which base addresses are valid
; d1 - Flags indicating which external features are valid
; d2 - Bits 31..16, hwCfgFlags info (possibly unknown)
; d2 - Bits 15..8, BoxFlag info (possibly unknown)
; d2 - Bits 7..0, Address Decoder Kind (zero if unknown)
;-----
; 108
BSR6 InitVIAs,a2 ; initialize the VIAs and RBV
BSR.L ValidatePRAM ; make sure PRAM is checked for reasonable values
move.l (sp)+,a6 ; restore regs <SM44>
;----------------------------------------------------------------
; Get logical: set up RAM, address translation tables
;----------------------------------------------------------------
; 11a
bsr ConfigureRam ; set up RAM, move sp to middle of 1st bank
;----------------------------------------------------------------
; D7 <- CPU type in low word, logic board type in hi word
;----------------------------------------------------------------
; 11e
BSR WhichCPU ; get CPU type in low word of d7
bsr WhichBoard ; get logic board type in hi word of d7
bsr.l InitMMU ; generate MMU tables, enable MMU <SM15>
; returns a4 -> BootGlobs
move.l sgTotalRAM(a4),a6 ; get top of memory
move.l a4,a5 ; get ptr to BootGlobs
add.l sgAllocOff(a4),a5 ; top useable memory = ptr + allocation offset
@done
;-----
; Now that we have low memory, set up some globals. We may nuke some of them later if its
; a cold boot, but we will re-set them up.
;
; At this point:
; 'Universal ROM' registers
; a0 - Pointer to table of base addresses in physical space
; a1 - Pointer to ProductInfo record for this machine in physical space
; d0 - Flags indicating which base addresses are valid
; d1 - Flags indicating which external features are valid
; d2 - Bits 15..8, BoxFlag info (possibly unknown)
; d2 - Bits 7..0, Address Decoder Kind (zero if unknown)
; d7 - bits 31-16: logic board type
; d7 - bits 15-0: cpu type (0 = 68000, 1 = 68010, etc)
;
; a4 - points to BootGlobs in logical space
; a5 - top of useable memory
; a6 - top of memory
; sp - in the middle of the useable logical space
;
;-----
; 136
MOVEM.L sgScratch(A4),D3-D6 ; get the extended Universal info <SM82>
ENDWITH ; {StartGlobals}
MOVEM.L D0-D6/A0-A1,-(SP) ; save all Universal info <SM82>
IF forRomulator THEN ; <T5>
TestInRam a0 ; are we in RAM?
beq.s @notInRam ; IF we are in RAM THEN
LEA $300,A0 ; use $300 so we don't blow away nub vars
bra.s @cont ; continue
@notInRam ;
ENDIF ; ELSE
LEA SysCom,A0 ; A0 <- pointer to start of system globals
@cont ; ENDIF
LEA HeapStart,A1 ; A1 <- pointer to end of system globals.
BSR FillWithOnes ; Fill system globals with ones.
BSR.L InitRomVectors ; initialize ROM vectorization
MOVEM.L (SP)+,D0-D6/A0-A1 ; restore Universal info <SM82>
swap d2 ; get high word for flags
move.w d2,HwCfgFlags ; store in the low mem global
swap d2 ; restore d2 to original value
move.l d0,AddrMapFlags ; save Universal info
move.l d1,UnivROMFlags ;
move.l a1,UnivInfoPtr ;
move.l d3,AddrMapFlags1 ; and extended universal info
move.l d4,UnivROMFlags1 ;
move.l d5,AddrMapFlags2 ;
move.l d6,UnivROMFlags2 ;
MOVE.B D7,CpuFlag ; save type of CPU we have
swap d7 ;
@StoreBox move.b d7,BoxFlag ; ... and save it in lomem
move.l a4,BootGlobPtr ; save the pointer to the boot globals (near top of RAM)
MOVE.L A5,BufPtr ; save the top of useable memory
MOVE.L A6,MemTop ; and the top of available memory
move.l UnivInfoPtr,a1 ; reload a1 in case the info record was adjusted in RAM <SM108> rb
bsr SetupHWBases ; setup the hardware base address low mems
BSR InitSCC ; init the SCC
bsr.l InitMMUGlobals ; set up MMU globals
BSR6 SysErrInit ; Init exception vectors.
clr.l DockingGlobals ; flag for EnableExtCache to know traps don't exist <H15>
MOVE.L #(1<<CACR_EI_020_030|\ ; WA=1, DBE=1, CD=1, ED=1, IBE=1, CI=1, EI=1
1<<CACR_CI_020_030|\ ;
1<<CACR_IBE_030|\ ;
1<<CACR_ED_030|\ ;
1<<CACR_CD_030|\ ;
1<<CACR_DBE_030|\ ;
1<<CACR_WA_030),D0 ;
@EEC ; nothing to do with Europe or Eric Clapton
Movec D0,CACR ; set up the CACR as desired from above
BSR.L EnableExtCache ; enable external cache
BSR.L DisableIntSources ; mask all interrupts
BSR SetUpTimeK ; Initialize TimeDBRA and TimeSCCDB.
BSR InitHiMemGlobals ; set up high memory. If > 8 meg RAM and 24-bit OS,
; BufPtr clipped at 8 meg and stack at 4 meg
*************************************************************************************************
* *
* B O O T R E T R Y *
* *
* Come back here if we fail to mount a volume, get a System file, or get memory. *
* *
* The only variables we don't reset at this time are: *
* *
* BootMask - needed to avoid continually trying to boot off a hard disk with bad blocks *
* MemTop, PWMBuf1, PWMBuf2, PWMValue, SoundBase, BufPtr *
* CPUFlag, TimeDBRA, TimeSCCDB, TimeSCSIDB *
* all Universal variables (i.e., UnivInfoPtr, UnivROMFlags, AddrMapFlags, etc) *
* *
*************************************************************************************************
; 1ce
BootRetry MOVE #$2700,SR ; disable interrupts
; initialize enough to get the Memory Manager going for InitIntHandler
BSR InitGlobalVars ; initialize a bunch of global variables
BSR.L DisableIntSources ; mask all interrupts
BSR.L InitDispatcher ; initialize the trap dispatcher
BSR.L InitMMUTrap ; set up SwapMMUMode trap
BSR.L InitMemMgr ; initialize the memory manager
BSR SetUpSysAppZone ; setup the system/application heap zone
; Move Stack to halfway through RAM and set new system heap limit.
BSR CompBootStack ; A0 <- the location of the stack at boot time
MOVE.L A0,SP ; Set the stack pointer there
SUBA.W #BootStackSize,A0 ; Give ourselves some stack space
_SetApplLimit ; Don't let the System Heap crash our stack
BSR.L InitMemoryDispatch ; go set up the MemoryDispatch globals
; initialize the expanded low-mem area (really in the system heap)
WITH ExpandMemRec ; <SM40>
Move.l #emRecSize,d0 ; size of ext to old low-mem <SM40>
_NewPtr sys,clear ; get a blob <SM40>
Move.l a0,ExpandMem ; stuff global ptr <SM40>
Move.w #emCurVersion,(a0)+ ; version number <SM40>
Move.l #emRecSize,(a0) ; size <SM40>
ENDWITH ; <SM40>
IMPORT InterC_1cc0_MoveUnivInfoToSysHeap
BSR.L InterC_1cc0_MoveUnivInfoToSysHeap
BSR.L initGestalt ; initialize Gestalt <SM39>
BSR.L FiddleWithEmulator
BSR.L InitIntHandler ; initialize interrupt vectors and dispatch tables
BSR CheckForEgretOrCuda ; Do we have an Egret/Caboose/Cuda? <mc2>
BNE.S @EInitDone ; -> Nope, don't be callin' shit
BSR.L InitEgretOrCuda ; Initialize Egret or Cuda Manager
IMPORT GestaltCudaFunc
BSR.L GestaltCudaFunc
@EInitDone
*************************************************************************************************
* *
* W E L C O M E T O M A C I N T O S H *
* *
* At this point, all the machine/feature specific stuff should be setup, so we should be *
* able to take off as if we were a generic Macintosh. *
* *
*************************************************************************************************
; 244
BSR.L InitRSRCMgr ; initialize the Resource Manager
BSR.L NMInit ; Initialize the Notification Manager
CLR.W -(SP) ; pass the INIT message to ShutDown
_ShutDown ; to initialize the queue
IMPORT EXPANSIONBUSMGR_452D0
BSR.L EXPANSIONBUSMGR_452D0
;ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ <SM101> SAM
; Install Code Fragment Mangaer (GoNative) <tcn>
;ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
; 25a
CASE ON
IMPORT GoNative
BSR.L GoNative ; Load all those NCODs!
CASE OFF
BPL.S @noPower ; -> No errors. Keep booting <SM132> SAM
MOVE.W #dsGNLoadFail,D0 ; Fatal GoNative load error.
_SysError ; Put up a dialog and die.
@noPower
; 268
IMPORT InterC_1690_CodeRegister
BSR.L InterC_1690_CodeRegister
IMPORT InterC_15c0_CodePrepare2
BSR.L InterC_15c0_CodePrepare2
IMPORT EXPANSIONBUSMGRFIRSTFUNC
BSR.L EXPANSIONBUSMGRFIRSTFUNC
BSR.L CompBootStackOld ; lifted from SetUpSysAppZone
MOVE.L A0,SP
SUBA.W #BootStackSize,A0
_SetApplLimit
IMPORT InterC_2560
BSR InterC_2560
CLR.L -(SP) ; who wrote this?
MOVE.L (SP)+, ($D18)
MOVE.L ToolScratch, -(SP)
LEA.L SetUpTimeK, A0
MOVE.L A0, ToolScratch
IMPORT InterC_2090_PowerMgr
BSR InterC_2090_PowerMgr
IMPORT InterC_2a80_EtherPrintfLib
BSR.L InterC_2a80_EtherPrintfLib
MOVE.L (SP)+, ToolScratch
BSR GetPRAM ; get 20 bytes PRAM, and TIME
BSR InitSlots ; inits slot cards, grays the screen(s)
BSR.L InitDTQueue ; initialize the Deferred Task Manager Queue
BSR.L EnableOneSecInts ; allow the clock interrupts
BSR.L Enable60HzInts ; allow vbl interrupts
;----------------------------------------------------------------
; Enable processor interrupts, after which we can start wanging real hw
;----------------------------------------------------------------
MOVE #$2000,SR ; supervisor state, interrupts on
IMPORT RSETKMAP
BSR.L RSETKMAP
IMPORT InterC_2bc0_DebugPrint
BSR.L InterC_2bc0_DebugPrint
MOVEQ.L #10, D0
_NewHandle ,Sys,Immed
MOVE.L A0, D0
BEQ.B @fail
MOVE.L D0, $1E0C
@fail
BSR.L INSTALLBASSCOMMON ; Init Bass before anyone calls _InitFonts (like _InitGraf) <SM112>
BSR.L FORCEINITFONTSCALL ; More Bass init stuff <SM112>
BSR InitCrsrMgrMiddle
BSR.L InitCrsrDev ; initialize Cursor globals <H9>
; (InitCrsrDev must preceed InitADB)
SUBQ #2, SP
MOVEQ.L #-1, D0
_DisplayDispatch
ADDQ #2, SP
;----------------------------------------------------------------
; Install Drivers (Disk, Sound, Video).
;----------------------------------------------------------------
; 300
LEA DrvQHdr, A1 ; Initialize the drive queue.
BSR.L InitQueue
BSR InitDeviceMgr ; Init unit I/O table and install the drivers.
IMPORT InitDeviceDispatch
BSR.L InitDeviceDispatch
BTST.B #$6, ($2400)
BNE.B @definitely
BTst.B #$0, ($DD0)
BEQ.B @dont
@definitely
BSR NewStartInitFunc
BSR.L InitSCSIMgr ; Init old and new SCSI Mgrs
@dont
IMPORT InitExpansionMgr
BSR.L InitExpansionMgr
IMPORT InterC_1980_Drivers
BSR.L InterC_1980_Drivers
BSR LoadDrivers ; load the standard drivers
BSR.L InitADB ; initialize ADB interface
import InterC_1910_USBFamilyExpertLib
bsr.l InterC_1910_USBFamilyExpertLib
BSR InitCrsrMgr ; Initialize cursor variables
IMPORT InitBCScreen
BSR.L InitBCScreen
BSR.L TEGlobalInit ; initialize TextEdit vectors
;----------------------------------------------------------------
; Create a temporary application heap. Load boot block buffer
; ptr into A6 and phoney A5 global world. Note these are based
; on an SP pointing to an EMPTY stack, whose location was earlier
; computed to be at (MemTop/2 - BootGlobalsSize).
;
; Historically, there was a _SetAppBase here after the system zone had been grown during
; initialization so far. We continue with the coincident zones, but run the _SetAppBase anyway
; for the sake of its internal side-effects. After the call, ApplZone, HeapEnd, and HiHeapMark
; must be reset. ApplLimit is set to BufPtr-DefltStack, which is fine for boot time.
;----------------------------------------------------------------
; 35a
MOVE.L SysZone,A0 ; Point to System Heap
MOVE.L bkLim(A0),A0 ; Point to end of System Heap
ADDA.L #MinSysExtra,A0 ; Make sure we have enough System Heap space
_SetAppBase ; Set up the start of the application heap
MOVEA.L SysZone,A0 ; the one true zone
MOVE.L A0,TheZone ; We still want the System Heap to be the default
MOVE.L A0,ApplZone ; revert to coincident zones
MOVE.L bkLim(A0),HeapEnd ; end of dynamic sys/appl zone
LEA BootGlobalsSize(SP), A6 ; boot blocks load pt
LEA QDBootGlobalsSize(SP),A5 ; leaving room for globals
BSR.L EnableSlotInts ; enable NuBus slot interrupts
BSR.L InitFasterInvals ; init the expandmem variable for WindowMgr
IF hasPwrControls THEN
BSR.L PowerDownAll ; power down all peripheral subsystems
ENDIF
BSR DrawBeepScreen ; Horst BeepmanhÕs patented gray screen
MOVE.L #WmStConst,WarmStart ; write warm start constant to indicate warm start
MOVEA.L BootGlobPtr,A0 ; point to bootGlobals
move.l #WmStConst,StartGlobals.sgWarmStart(A0) ; flag warm start in a
; place where StarTest can see it w/o an MMU
import InterC_2780_FireWire
bsr.l InterC_2780_FireWire
;----------------------------------------------------------------
; Initialize the File System.
;----------------------------------------------------------------
; 3b0
MOVE #40,D0 ; Inital number of file control blocks
_InitFS
;----------------------------------------------------------------
; <65>, Other Terror changes...
;----------------------------------------------------------------
; 3b6
BTST #$1, $2409
BEQ.B @dont_do_mysterious_thing
IMPORT LoadPCCardLib
BSR.L LoadPCCardLib
@dont_do_mysterious_thing
IMPORT InterC_2a20_SCSITargetMode
BSR.L InterC_2a20_SCSITargetMode
BTst.B #5, $2408
BEQ.B @nodiskmode
BSR.L SCSIDiskMode ; check if we should be in SCSI Disk Mode <SM16>
@nodiskmode
BSR.L INITSCSIBOOT ; allocate some memory for SCSI booting
; and load third party SIMs (SCSI Interface
; modules
IMPORT ATAMgr_5dae0
BSR.L ATAMgr_5dae0
IMPORT ATAMgr_5dde0
BSR.L ATAMgr_5dde0
IMPORT InterC_2130_CardBus
BSR InterC_2130_CardBus
*************************************************************************************************
* *
* Everything's ready to go, so go look for a disk to boot from *
* *
*************************************************************************************************
BRA BootMe ; Exit Stage Right
*************************************************************************************************
* *
* M I S C E L L A N E O U S U T I L I T I E S *
* *
*************************************************************************************************
;________________________________________________________________________________________
;
; Routine: WhichCPU 3f2
;
; Inputs: none
;
; Outputs: D7.L- 0, 1, 2, 3, or 4 for 68000, 68010, 68020, 68030, 68040 respectively
;
; 020 - icache flushed & enabled
; 030 - both caches flushed, icache enabled, dcache set up for write allocate
; but not enabled
; 040 - both caches invalidated, icache enabled.
;
; Trashes: none
;
; Function: determines which sibling of the 68K is running by looking at exception stack
; frames, addressing modes, and at instruction/data cache enables
;
; Technical details:
;
; 020 CACR: (from MC68020 User's Manual, 3rd Ed. pg. 6-3)
; +------------------------------------------------+
; | 0 .............. 0 | C | CE | F | E |
; +------------------------------------------------+
; 31 4 3 2 1 0
;
; C = Clear Cache
; CE = Clear Entry
; F = Freeze Cache
; E = Enable (Inst.) Cache
;
;
; 030 CACR: (from MC68030 User's Manual, 2nd Ed. pg 6-15)
; +------------------------------------------------------------------------------------+
; | 0 ... 0 | WA | DBE | CD | CED | FD | ED | 0 | 0 | 0 | IBE | CI | CEI | FI | EI |
; +------------------------------------------------------------------------------------+
; 31 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
;
; WA = Write Allocate
; DBE = Data Burst Allocate
; CD = Clear Data Cache
; CED = Clear Entry in Data Cache
; FD = Freeze Data Cache
; ED = Enable Data Cache
; IBE = Instruction Burst Enable
; CI = Clear Instruction Cache
; CEI = Clear Entry in Instruction Cache
; FI = Freeze Instruction Cache
; EI = Enable Instruction Cache
;
;
; 040 CACR: (from MC68040 User's Manual, 1st Ed., pg. 7-19)
; +-------------------------------------+
; | DE | 0 ... 0 | IE | 0 ... 0 |
; +-------------------------------------+
; 31 30 16 15 14 0
;
; DE = Enable Data Cache
; IE = Enable Instruction Cache
;
;
; The assumption made here (and other places where the CACR is manipulated) are
; that if the bits specified in the CACRs above specified as having a value of
; zero are written, those bits are ignored. All bits documented in the CACR as
; zero are ALWAYS read as zeroes. Given the placement of the various bits,
; setting a bit that is valid in one of the MC68xxx processors that is undefined
; (reserved, or zero) on others will be the method of CPU detection.
;________________________________________________________________________________________
WhichCPU
MACHINE MC68020
moveq.l #2,d7 ; setup index to see if index scaling works
rts ; all done
;________________________________________________________________________________________
;
; Routine: WhichBoard 3f6
;
; Inputs: D7.B- CPU type
;
; Outputs: D7.L- [ 0 ] [logic board type, i.e., boxFlag] [ 0 ] [CPU type]
;
; Trashes: none
;
; Function: figures out what logic board we are running on
;________________________________________________________________________________________
WhichBoard swap d7 ; get CPU type in hi word
clr.w d7 ; be defensive, prepare a word...
move.b ProductInfo.ProductKind(a1),d7 ; get the BoxFlag value
swap d7 ; put BoxFlag into hi word
rts
;________________________________________________________________________________________
;
; Routine: SetUpTimeK 402
;
; Inputs: D7.B- CPU type
;
; Outputs: D7.L- [ 0 ] [logic board type, i.e., boxFlag] [ 0 ] [CPU type]
;
; Trashes: D0-D2, A0-A4
;
; Function: sets up timing constants in low memory:
;
; TimeDBRA - empty DBRA iterations/millisecond
; TimeSCCDB - TST SCC + DBRA iterations/millisecond (used by AppleTalk)
; TimeSCSIDB - TST SCSI 5380 + DBRA iterations/millisecond (used by SCSI Manager)
;
; NOTE: VIA1 Timer 2 must not be in use, and there must be no sources of
; processor interrupts (although processor interrupts will be enabled)
;________________________________________________________________________________________
SetUpTimeK
MoveM.L D1-D2/A1-A4, -(A7)
Move SR, -(A7)
OrI #$700, SR
Move.L ($64), -(A7)
BTst.B #$6, ($2400)
BNE.B L8
BTst.B #$1, ($2400)
BNE L12
Bra L13
L8: MoveQ.L #$0, D0
Move ([$68FFEFD0.L],$80), D0
MoveM.L D0-D2/A0, -(A7)
MoveA.L ([$68FFEFD0.L],$18), A0
Tst.L A0
BNE.B L10
MoveA.L ([$68FFEFF0.L],$100), A0
Move.L #$80000000, D1
CmpI.L #$1F, D0
BGT.B L9
ROR.L D0, D1
Or.L D1, $14(A0)
Nop
Bra L11
L9: SubI.L #$20, D0
ROR.L D0, D1
Or.L D1, $4(A0)
Nop
Bra L11
L10: AddA.L #$10000, A0
LsL.L #$5, D0
Move.L $0(A0,D0.W), D1
BClr.L #$7, D1
Move.L D1, $0(A0,D0.W)
Nop
L11: MoveM.L (A7)+, D0-D2/A0
Bra.B L13
L12: MoveA.L ($DD8), A0
AddA.L (A0), A0
MoveA.L $E4(A0), A0
OrI.L #$400, $24(A0)
L13: MoveA.L ($1D4), A1
BClr.B #$5, $1600(A1)
Nop
Move.B #$FF, $1200(A1)
Nop
Move.B #$A0, $1C00(A1)
Nop
; Load timer with number of VIA ticks per millisecond - 3. There are 3 clocks of overhead
; because it takes 1 clock for the timer to load, and 2 extra clocks because it has to count
; through -1, instead of down to 0.
moveq.l #(NTicks-3)**$FF,d1 ; low byte of value to load into timer
moveq.l #(NTicks-3)>>8,d2 ; high byte of value to load into timer
movea.l sp,a3 ; mark the stack
lea TimerInt,a0 ; point to the interrupt handler
move.l a0,AutoInt1 ; setup the interrupt handler
lea TimingTable,a4 ; point to table of routines to time
@nextRoutine
movea.l a4,a0 ; point to table entry
adda.w (a4),a0 ; get routine address
moveq.l #2,d0 ; make a quick run to get it into the cache
lea @cacheLoaded,a2 ; setup return address
jmp (a0) ; call the routine to time
@cacheLoaded
movea.l a4,a0 ; point to table entry
adda.w (a4)+,a0 ; get routine address
moveq.l #-1,d0 ; run until the timer interrupts
lea @timedOut,a2 ; setup return address
andi.w #$F8FF,sr ; enable interrupts
jmp (a0) ; call the routine to time
@timedOut not.w d0 ; convert to number of loop executions.
bne.s @skip_the_thing
move.w #$ffff, d0
@skip_the_thing
movea.w (a4)+,a0 ; get the address of the lowmem
move.w d0,(a0) ; store the result
btst #6,$2400
beq.b @dont
MOVE.B ([$68FFEFD0],$0083),([$68FFEFD0],$008D) ; VIAIntBit+1 -> CompletedInts+1
@dont
tst.w (a4) ; see if any more routines to time
bne.s @nextRoutine ; time all routines in the table
eieioSTP
move.b #(0<<ifIRQ)+(1<<ifT2),vIER(a1) ; Disable Timer 2 interrupts.
NOP
MOVE.L (A7)+,$0064
MOVE (A7)+,SR
MOVEM.L (A7)+,D1/D2/A1-A4
rts
TimerInt nop
tst.b vT2C(a1) ; Reset the timer interrupt.
nop
movea.l a3,sp ; restore the stack pointer
jmp (a2) ; just jump to the return address
TimingTable dc.w DbraTime-*,TimeDBRA ; simple DBRA loop timing
dc.w SCCTime-*,TimeSCCDB ; SCC access timing
dc.w SCSITime-*,TimeSCSIDB ; SCSI access timing
dc.w VIATime-*,TimeVIADB ; VIA access timing
dc.w 0 ; end of list
DbraTime
move.b d1,vT2C(A1) ; load low order byte
move.b d2,vT2CH(A1) ; load high order byte & go.
@loop
dbra d0,@loop ; time an empty DBRA loop
jmp (a2) ; return if loop expires
SCCTime
movea.l SCCRd,a0 ; point to SCC base read address
move.b d1,vT2C(A1) ; load low order byte
move.b d2,vT2CH(A1) ; load high order byte & go.
@loop
btst.b #3,$DD3
bne.s @differentloop
dbra d0,* ; time the SCC DBRA loop
jmp (a2) ; return if loop expires
@differentloop
btst.b #0,(a0)
dbra d0,@differentloop
jmp (a2)
SCSITime
TestFor SCSI96_1Exists
bne.s @normalTest
btst.b #6, $2400
beq.s @normalTest
move.b d1, vT2C(a1) ; load low order byte
move.b d2, vT2CH(a1) ; load high order byte & go.
dbra d0, *
jmp (a2)
@normalTest
movea.l SCSIBase,a0 ; point to SCSI base address
move.b d1, vT2C(a1) ; load low order byte
eieioSTP
move.b d2, vT2CH(a1) ; load high order byte & go.
eieioSTP
TestFor SCSI96_1Exists ; use macro to check if we have
beq.s @loop80 ; SCSI96. Bra. if not
@loop96
btst.b #0, rSTA(a0) ; typical SCSIMgr96 loop
dbra d0, @loop96 ; time the SCSI DBRA loop
jmp (a2) ; return if loop expires
@loop80
btst.b #0,sCSR(A0) ; typical SCSIMgr loop
dbra d0,@loop80 ; time the SCSI DBRA loop
jmp (a2) ; return if loop expires
; ----------------------------------------------------------------------------------------------------- <H11>
;
; VIATime 5ca, in the IIci/IIfx/TERROR/HORROR ROMs, lives at 40x008BC. <H11>
; --------
; This means that the @loop btst.b #0,(A0) is at 40x008C8, and the dbra d0,@loop <H11>
; is at 40x008CC. This code, "half cache-line aligned, when run on an 040 and above, will execute <H11>
; in an on-chip cache SEPARATE FROM THE I-CACHE, called (appropriately), the DBRA-CACHE (not to be <H11>
; confused with the Zebra-cache, or any other African equine). Why this is so important is that the <H11>
; memory address the BTST.B is referencing is a VIA (not surprising, since this is a loop that <H11>
; calculates Time-VIA-DB), and on 040s and above I/O space ($5xxxxxxx) is marked as non-cached and <H11>
; serialized. At 20MHz and below, 040s will encounter a 'beat frequency' between the CPU and VIA <H11>
; clocks, which will cause the CPU to miss both edges of the VIA clock on the first pass. This causes <H11>
; the CPU to have to wait an extra VIA clock cycle (1.2µs * 2 = 2.4µs) to access the register on the <H11>
; VIA about 21% of the time when running out of the DBRA CACHE. However, if the loop is unaligned and <H11>
; does not run from the DBRA-cache and CPU = 040 @ ² 20MHz, it will synchronize with the VIA clock <H11>
; on the first VIA clock cycle ZERO percent of the time. So, just to perform sadistic, saddalistic <H11>
; necroequinia, ALL unaligned loop VIA accesses at 20MHz and below will take 2.4µs. This is important <H11>
; (you knew I'd get to this part eventually, right?) when using TimeVIADB as an EXACT time instead of <H11>
; a "minimum" type of timing constant. Poignant example - {Drivers}Sony:SonyMFM.a in mWrData uses <H11>
; TimeVIADB to wait EXACTLY a certain amount of time (~ 235µs). However, the constant generated from <H11>
; this loop when it is aligned is $2B0. But 1ms/$2B0 ~= 1.45µs, which indicates the bias of 79% of the <H11>
; VIA accesses taking 1.2µs (1.2µs * (0.79 * $2B0) = 652µs) and 21% taking 2.4µs <H11>
; (2.4µs * (0.21 * $2B0) = 346µs), giving (652+346 = 998µs. The loop in mWrData is unaligned so 100% <H11>
; of the VIA accesses will take 2.4µs. So instead of the loop waiting 235µs (040 @ 20MHz = 162 times <H11>
; thru the loop; 162 * 1.45 = ~235), it actually waits 162 * 2.4 = ~389 µs. This is bad since the <H11>
; reason why this loop is waiting is for the floppy drive head to reach the correct place at the start <H11>
; of a sector to begin writing and since that loop waits so long, sectors are written late and the <H11>
; floppy is trashed. <H11>
;
; So by unaligning this loop it calculates a smaller number since each VIA access will then take 2.4µs <H11>
; and mWrData will work correctly.
;
; In the case of 25MHz and above 040 processors, the rate that CPU and VIA clocks don't synchronize <H11>
; drops to ~ 1% and above that the CPU clock rate is fast enough that it always guarantees that it <H11>
; NEVER misses the first synchronization with the VIA clock. Unaligning the loop has no effect on <H11>
; ³ 25MHz 040 processors. <H11>
;
; ----------------------------------------------------------------------------------------------------- <H11>
VIATime
lea vIER(a1),a0 ; <40x008BC> point to a VIA register <H11>
eieioSTP
move.b d1,vT2C(A1) ; <40x008C0> load low order byte <H11>
eieioSTP
move.b d2,vT2CH(A1) ; <40x008C4> load high order byte & go. <H11>
eieioSTP
@loop
btst.b #0,(A0) ; <40x008CA> typical VIA access loop <H11>
dbra d0,@loop ; <40x008CE> time the VIA DBRA loop <H11>
jmp (a2) ; <40x008D2> return if loop expires <H11>
;________________________________________________________________________________________
;
; Routine: JmpTblInit 5e0, JmpTbl2 5e2
;
; Inputs: A0 - pointer to table of routine word offsets (A0-relative)
; A1 - pointer to destination jump table in RAM
; D1 - number of vectors to install - 1
;
; Outputs: A0 - pointer to next entry in offset table
; A1 - pointer to next jump table entry in RAM
;
; Trashes: D0-D2
;
; Function: sets up RAM-based jump tables from ROM-routine offset tables
;________________________________________________________________________________________
JmpTblInit MOVE.L A0,D0 ; remember its address
JmpTbl2 MOVEQ #0,D2 ; clear high part for arithmetic
MOVE.W (A0)+,D2 ; get the next offset
ADD.L D0,D2 ; compute the address
MOVE.L D2,(A1)+ ; install it in the jump table
DBRA D1,JmpTbl2 ; loop for all vectors
RTS
;________________________________________________________________________________________
;
; Routine: FillWithOnes 5f0
;
; Inputs: A0 - pointer to starting RAM location (must be longword aligned)
; A1 - pointer to ending RAM location (must be longword aligned)
;
; Outputs: A0 - pointer to next entry in offset table
; A1 - pointer to next jump table entry in RAM
;
; Trashes: D0-D2
;
; Function: fills a longword-aligned memory range with all 1's
;________________________________________________________________________________________
FillWithOnes
MOVEQ #-1,D1 ; what to fill memory with <SM84>
@FillLoop MOVE.L D1,(A0)+ ; fill next longword <SM84>
CMPA.L A1,A0 ; have we reached the end of the range? <SM84>
BLO.S @FillLoop ; -> no, keep looping until done <SM84>
RTS ; <SM84>
;________________________________________________________________________________________
;
; Routine: CompBootStack 5fa
;
; Inputs: none
;
; Outputs: A0 - location of stack pointer at boot time
;
; Trashes: D0
;
; Function: computes the boot time stack pointer = sysZone + (BufPtr-sysZone)/2 - space for QD
;________________________________________________________________________________________
CompBootStack
btst #$06,$240B
beq.s CompBootStackOld
move.l #$007EFFE0,A0 ; 8 M - 64 K - 32 b
rts
CompBootStackOld
move.l BufPtr,d0 ; get top useable memory
move.l sysZone,a0 ; get start system heap
sub.l a0,d0 ; get (top useable - sys heap start)
lsr.l #1,d0 ; divide by two
add.l a0,d0 ; get sys heap + (top - sysHeap)/2
sub.w #BootGlobalsSize,d0 ; leave room for QuickDraw stuff.
andi.w #$FFF0,d0 ; force it to be even <SM81>
move.l d0,a0
rts
;________________________________________________________________________________________
;
; Routine: ConfigureRAM 624
;
; Inputs: D2.B- address decoder kind (from Universal)
; A0 - pointer to machine's DecoderInfo table (from Universal)
; A6 - pointer to RAM chunk table
;
; Outputs: A6 - pointer to RAM chunk table
; RAM chunk table pointed to by A6 reflects current RAM h/w setup
; 'offset to top of bank' field in boot globals is set up
; SP - initialized to value as described below
; Universal ROM registers (A0-A1/D0-D6) unchanged
;
; Trashes: D7, A2-A5
;
; Function: sets up the stack to point at 1.5 meg into the first bank if it's ³2 meg,
; otherwise it points at 3/4 of the first bank's size. It also changes the
; chunk table so there is one entry per contiguous block of physical RAM. (ie
; it merges two or more adjacent physical entries into one with a size equal to
; the sum of the adjacent chunks).
;________________________________________________________________________________________
ConfigureRAM
WITH StartGlobals ; <SM45>
move.l (sp)+,sp ; save return address
move.l 4(a6),d7 ; get size 1st chunk
cmp.l #$200000,d7 ; at least two meg of RAM in first bank? <T16>
bhs.s @plentyORam ; IF we have less than two meg THEN <T16>
lsr.l #2,d7 ; divide amt useable logical memory by 4 <T16><SM116>
mulu.l #3,d7 ; multiply by 3 to get 3/4 of useable memory <T16><T32>
bra.s @stakOk ; go set stack <T16>
@plentyORam ; ELSE <T16>
move.l #defStackAddr,d7 ; use default stack addr <T16>
@stakOk ; ENDIF
exg.l d7,sp ; set stack at increment
add.l (a6),sp ; add in base 1st chunk
move.l d7,-(sp) ; restore return address
move.l a6,a3 ; ptr into chunk table
@newBank move.l a3,a2 ; keep ptr to bank size
move.l (a3)+,d7 ; init size
@loop add.l (a3)+,d7 ; add in length
cmp.l (a3)+,d7 ; does next start = start of next bank?
beq.s @loop ; yes, continue merging
sub.l (a2)+,d7 ; subtract off start to get size
move.l d7,(a2)+ ; write back the total
subq.l #4,a3 ; no, back up to start of that bank
cmpi.l #-1,(a3) ; any more banks?
bne.s @newBank ; and start merging again with that bank...
move.l (a3)+,(a2)+ ; write the terminator <SM116>
move.l (a3)+,(a2)+ ; copy the 1st dig long
move.l (a3)+,(a2)+ ; copy the 2nd dig long
move.l (a3)+,(a2)+ ; copy the 3rd dig long
; move.l (a3)+,(a2)+ ; copy the last diag sig long
sub.l a6,d7
move.l d7,sgTopOff(a6) ; save offset to top of RAM
rts ;
ENDWITH ; {StartGlobals}
;________________________________________________________________________________________
;
; Routine: SetUpSysAppZone 674
;
; Inputs: none
; Outputs: none
; Trashes: D0,A0
;
; Function: Creates the system heap weÕll use till rebooting. ItÕs handy to fool the
; Memory Manager into thinking itÕs both system and application heaps in order
; to allow the heap to grow as drivers, buffers, etc. are loaded. One subtlety
; is that HeapEnd (which applies to the app heap) must be set up along with ApplZone.
;________________________________________________________________________________________
SetUpSysAppZone
lea SysHeap,a0 ; point at normal system heap template
_InitZone ; set up initial system heap
Move.L theZone,SysZone ; save pointer to the new zone
Move.L SysZone,RamBase ; setup RamBase to system heap
; Make the System Heap growable by making it look like the Application Heap
MOVE.L SysZone,A0 ; Point to the System Heap
MOVE.L A0,ApplZone ; Make it the Application Heap as well
MOVE.L bkLim(A0),A0 ; Point to the end of the System Heap
MOVE.L A0,HeapEnd ; Set it as the end of the Application Heap
; Set ApplLimit (really, ÔSysLimitÕ) based on having a real qd-capable stack smack in the middle of RAM.
BSR.S CompBootStack ; A0 <- the future location of our stack
CMPA.L SP,A0 ; Future - Current stack ptrs (want A0 = lower value)
BLS.S @3 ; Future <= Current means use Future (be pessimistic)
MOVE.L SP,A0 ; Use the current sp when itÕs lower
@3 SUBA.W #BootStackSize,A0 ; Give ourselves some stack space
_SetApplLimit ; Don't let the System Heap crash our stack
; _MoreMasters ; Create 768 master pointers at the bottom of <SM132> SAM
; _MoreMasters ; the heap. This is approximately the number of
; _MoreMasters ; relocatable objects in the system heap for
; _MoreMasters ; System 7.1 and a set of standard inits.
; _MoreMasters ; (We need 6 calls to MoreMasters to get 768 of them.
; ; _InitZone will create one block of "4*dfltMasters"
; RTS ; MPs for us.)
move.l d3,-(sp)
moveq.l #2,d3
@trap_blk
_MoreMasters
_MoreMasters
_MoreMasters
_MoreMasters
_MoreMasters
_MoreMasters
_MoreMasters
_MoreMasters
dbf d3,@trap_blk
move.l (sp)+,d3
rts
SysHeap DC.L HeapStart
DC.L HeapStart+SysZoneSize
DC.W 4*dfltMasters ; Master Pointer allocation size = 128 (MPs)
DC.L 0
;________________________________________________________________________________________
;
; Routine: GetPRAM 6ce
;
; Inputs: none
; Outputs: none
; Trashes: D0-D2, A0-A1
;
; Function: reads in the original 20 bytes of PRAM, and sets up globals based on the saved state
;________________________________________________________________________________________
GetPRAM _InitUtil ; seed low memory PRAM buffer
; Initialize the keyboard repeat parameters from system parameter memory.
MOVEQ #0,D1
MOVE.B SPKbd,D1 ; Get keyboard rate and threshold info.
MOVEQ #$0F,D0
AND.W D1,D0 ; Mask out the keyboard repeat rate.
BNE.S @1 ; Branch if rate is valid.
MOVEQ #$48,D0 ; If invalid, use default rate.
@1 ADD.W D0,D0 ; Convert to ticks.
MOVE.W D0,KeyRepThresh ; Save keyboard repeat rate.
LSR.W #4,D1 ; Get keyboard repeat threshold.
BNE.S @2 ; Branch if valid.
MOVE.W #$1FFF,D1 ; If invalid, use default rate.
@2 LSL.W #2,D1 ; Convert to ticks.
MOVE.W D1,KeyThresh ; Save keyboard repeat threshold.
; Note: double click (dddd) and caret blink (cccc) times are stored as (ddddcccc),
; where dddd and cccc are each in fifteenths of a second.
MOVE.B SPClikCaret,D1 ; Get double click & caret times (ddddcccc)
MOVEQ #$F,D0 ; Caret time is in low nibble
AND.B D1,D0 ; Compute caret time
LSL.B #2,D0 ; Convert to ticks
MOVE.L D0,CaretTime ; Save caret time (in ticks)
LSR.B #2,D1 ; D1 <- xxddddxx (where dddd is dbl click time)
MOVEQ #$3C,D0 ; Double click mask
AND.B D1,D0 ; Compute double click time in ticks
MOVE.L D0,DoubleTime ; Save double click time
RTS
*************************************************************************************************
* *
* G L O B A L I N I T I A L I Z A T I O N R O U T I N E S *
* *
*************************************************************************************************
;________________________________________________________________________________________
;
; Routine: InitHiMemGlobals 70c
;
; Inputs: none
; Outputs: none
; Trashes: D0-D1, A0-A2
;
; Function: sets up globals peculiar to the BufPtr world, which may be set by a
; diagnostic ROM, if any
;________________________________________________________________________________________
InitHiMemGlobals
MOVE.W #-1,PWMValue ; set current pwm speed invalid
move.l BufPtr,a0 ; get top of useable memory
move.l MemTop,A1 ; get the top of total memory <H7>
move.l A1,PhysMemTop ; Save top of total memory. <H7>
move.l a0,RealMemTop ; Save top of available memory
move.l ([BootGlobPtr],StartGlobals.sgPhys2Log),Phys2Log
; <SMx> CSS get physical->logical conversion factor
SUBA.W #bufWorldSize,A1 ; maximum BufPtr location allowed <H7>
CMPA.L A1,A0 ; is BufPtr still too high in memory? <H7>
BLS.S @BufPtrOK ; -> no, leave it alone <H7>
MOVEA.L A1,A0 ; yes, move it down a bit <H7>
@BufPtrOK MOVE.L A0,BufPtr ; save pointer to top of usable RAM.
RTS ; ENDIF
;________________________________________________________________________________________
;
; Routine: InitGlobalVars 73c
;
; Inputs: none
; Outputs: none
; Trashes: D0-D1, A0-A1
;
; Function: presets a bunch of system and toolbox globals (the Memory Manager sets up
; a few others)
;________________________________________________________________________________________
InitGlobalVars
Lea BaseOfRom,A0 ; point to RomBase
MOVE.L A0,ROMBase
movea.l UnivInfoPtr,a0 ; get pointer to product info record
move.w ProductInfo.Rom85Word(a0),ROM85 ; Set the Rom85 and PowerOffInt bits appropriately
MOVE.L #$00010001, OneOne ; set up magic constants
MOVEQ #-1,D0
MOVE.L D0, MinusOne ; set up MinusOne
MOVE D0,FSFCBLen ; mark that FS needs (re)initialization
MOVE.L D0,SMGlobals ; no Sound Manager yet
bsr SetupHWBases ; Init some I/O and driver base addresses
CLR.L PollProc ; no proc to handle SCC poll data
CLR.L DSAlertTab ; no deep shit alerts yet
BigLea FSIODneTbl,A0 ; point to the offset table
LEA JFetch,A1 ; point to 1st jump table entry
MOVEQ #2,D1 ; there are 3 vectors
BSR JmpTblInit
; Initialize some system booleans so we can initialize the system properly.
CLR.B DskVerify ; no disk verify
CLR.B LoadTrap ; no trap before launch
CLR.B MmInOK ; initial memory mgr checks
CLR.W SysEvtMask ; don't allow any events to be posted
CLR.L JKybdTask ; no keyboard task yet
CLR.L StkLowPt ; set stack low at this time (turn off check during VBL)
; SoundBase really truely is an OUT-OF-DATE lowmem. However, there's glue code, linked into
; apps/drvrs, out there that still references this guy. Sooooo, we'll set SoundBase=ASCBase
; on ASC machines. On non-asc machines, ie. cyclone, we'll set SoundBase to a ROM address
; so apps/drvrs will write to ROM. We must carefully choose our ROM address. If
; its close to a ROM jump table. Apps/drvrs writing to @SoundBase can corrupt a ROM jump table
; in the DATA CACHE. We'll choose the starting address of the bootbeep since its not code or
; jump table.
;
Move.l ROMBase,A0 ; Get ROMBase
Move.l A0,SoundBase ; Set up SoundBase
;--------------------------------------
LEA VBLQueue,A1
BSR.L InitQueue ; initialize VBL queue header
CLR.L Ticks ; clear system tick count
MOVE.B #$80,MBState ; set current mouse button state to UP
CLR.L MBTicks ; set timestamp for mouse button
;--------------------------------------
; Font Manager Globals
CLR.L SysFontFam ; clear SysFontFam and SysFontSize
CLR.L WidthTabHandle ; clear global width table handle
CLR.W teSysJust ; clear default Text justification
CLR.B WordReDraw ; don't draw words in RecalDraw
CLR.L SynListHandle ; clear handle to synthesized fonts
MOVE.W MinusOne,FMExist ; no InitFonts call yet
;--------------------------------------
; Clear out the nominally QD but mostly cursor variables
BSR.S InitCrsrVars
; leave DSAlertRect =-1 (disabled)
; leave DSDrawProc = -1 (disabled)
CLR.W SysVersion ; zero ram-patch version in low memory
BCLR #AlrmFlEnable,AlarmState ; disable alarm flashing
BigLea MDJGNEFILTER,A0 ; hook in our GNE filter <SM22>
MOVE.L A0,JGNEFilter ;
CLR.L IAZNotify ; no InitApplZone notify proc
MOVE.W #$FF7F, FlEvtMask ; init for disable of DIP flushes (move to InitEvents??)
MOVEQ #-1,D0 ; Get -1
MOVE.W D0,ChunkyDepth ; no pixel depth yet
MOVE.L D0,CrsrPtr ; no cursor save area
MOVE.L D0,PortList ; no grafport list
LEA RGBWhite,A0 ; init for color manager
MOVE.L D0,(A0)+ ; 6 bytes for white value
MOVE.W D0,(A0)
LEA RGBBlack,A0 ; init for color manager
CLR.L (A0)+ ; 6 more bytes for black value
CLR.W (A0)
CLR.L LockMemCt ; initialize Lock Memory Count
RTS
;________________________________________________________________________________________
;
; Routine: InitCrsrVars 81e
;
; Inputs: none
; Outputs: none
; Trashes: A0,A1
;
; Function: initializes cursor globals
;________________________________________________________________________________________
InitCrsrVars
LEA GrafBegin,A0 ; start of global vars
LEA GrafEnd,A1 ; end of global vars
@ZeroLoop CLR.W (A0)+
CMPA.L A1,A0
BCS.S @ZeroLoop ; clear out cursor globals area
RTS
;________________________________________________________________________________________
;
; Routine: InitCrsrMgr 82e
;
; Inputs: none
; Outputs: none
; Trashes: A0,A1
;
; Function: initializes cursor globals
;________________________________________________________________________________________
; ugly, but put here for now!
ADBCount equ 0 ; word: number of valid error deltas
MaxCnt equ ADBCount+2 ; word: limit on number of error deltas
Err7 equ MaxCnt+2 ; word: time-7 error magnitude
Err6 equ Err7+2 ; word: time-6 error magnitude
Err5 equ Err6+2 ; word: time-5 error magnitude
Err4 equ Err5+2 ; word: time-4 error magnitude
Err3 equ Err4+2 ; word: time-3 error magnitude
Err2 equ Err3+2 ; word: time-2 error magnitude
Err1 equ Err2+2 ; word: time-1 error magnitude
Error equ Err1+2 ; word: accumulated error
GSize equ Error+2 ; size of globals
TotalSize equ GSize+8 ; size of globals + size of mickey bytes
InitCrsrMgr MOVE.L #$000F000F,D0
LEA MTemp,A0 ; point to the temp mouse variable
MOVE.L D0,(A0)+ ; put MTemp AT 15,15
MOVE.L D0,(A0)+ ; put RawMouse AT 15,15 TOO
MOVE.L D0,(A0)+ ; put Mouse AT 15,15 TOO
CLR.L (A0)+ ; CrsrPin: top = 0, left = 0
MOVE.W ColLines,(A0)+ ; set bottom
MOVE.W RowBits,(A0) ; set left
moveq #TotalSize,d0 ; allocate space for mouse tracking ptr
_NewPtr ,SYS ; put in in system heap
move.l a0,MickeyBytes ; save globals ptr
; initialize some of the ADB Globals
move.w #1,ADBCount(a0) ; Count = 1
move.w #8,MaxCnt(a0) ; MaxCnt = 8
clr.w Error(a0) ; Error = 0
; stuff in 8 bytes to initialize tracking
lea MouseBytes,a1 ; source = default bytes
add #GSize,a0
move.l (a1)+,(a0)+ ; move the bytes in
move.l (a1),(a0)
RTS
MouseBytes dc.b 4,10,15,255,255,83,77,72
InitCrsrMgrMiddle
LEA GrafEnd,A1 ; end of cursor globals
BigLea CrsrDevHandleVBL,A0 ; install cursor VBL task <H9>
MOVE.L A0,-(A1) ; JCrsrTask
MOVE.W #$0006,-(A1) ; CrsrThresh
; Init the cursor jump table. The offsets are obtained from a table in CrsrCore.
BigLea InitCrTable,A0 ; point to the offset table
LEA JHideCursor,A1 ; point to 1st jump table entry
MOVEQ #8-1,D1 ; there are 8 vectors
BSR JmpTblInit ; init vectors (destroys D0-D2)
; A0 points to next entry in offset table
LEA NewCrsrJTbl,A1 ; point to 1st new jump table entry
MOVEQ #NewCrsrJCnt,D1 ; get number of vectors
BSR JmpTbl2 ; init vectors (destroys D0-D2)
LEA HiliteRGB,A0
MOVE.L #$00060082,D0
_ReadXPRam
MOVEQ #-1,D0 ; Useful constant for cursor init
MOVE.W D0,CrsrNew ; flag cursor as changed, turn on tracking
MOVE.L D0,MouseMask ; No jerkiness with $FFFFFFFF mask
RTS
;________________________________________________________________________________________
;
; Routine: SetupHWBases 8be
;
; Inputs: none
; Outputs: none
; Trashes: D0, D3, A0, A2, A3
;
; Function: sets up the hardware base address low memory globals
;________________________________________________________________________________________
SetupHWBases
with DecoderInfo
movem.l d1/d2,-(sp) ; save these
move.l AddrMapFlags,d0
move.l AddrMapFlags1,d1 ; get new bits 32-63
move.l AddrMapFlags2,d2 ; and bits 64-96
movea.l UnivInfoPtr,a0
adda.l ProductInfo.DecoderInfoPtr(a0),a0
lea @BaseInitTable,a2 ; point to the table
@loop move.w (a2)+,d3 ; get the bit number
bmi @exit ; exit if end if table
movea.w (a2)+,a3 ; get the low mem address
cmpi.w #32,d3 ; above low 32 bits?
bge.s @chkmid32 ; yes, branch
btst.l d3,d0 ; see if the base is valid
beq.s @loop ; if not, skip it
lsl.w #2,d3 ; setup index into bases table
move.l (a0,d3.w),(a3) ; initialize the low mem
bra.s @loop ; go on to next low mem
@chkmid32 sub.w #32,d3 ; it's in 32-63 range
cmpi.w #32,d3 ; above low 32 bits?
bge.s @chkhigh32 ; yes, branch
btst.l d3,d1 ; see if the base is valid
beq.s @loop ; if not, skip it
lsl.w #2,d3 ; setup index into bases table
move.l (4*32,a0,d3.w),(a3) ; initialize the low mem
bra.s @loop ; go on to next low mem
@chkhigh32 sub.w #32,d3 ; it's in 64-95 range
btst.l d3,d2 ; see if the base is valid
beq.s @loop ; if not, skip it
lsl.w #2,d3 ; setup index into bases table
move.l (4*64,a0,d3.w),(a3) ; initialize the low mem
bra.s @loop ; go on to next low mem
@BaseInitTable
dc.w VIA1Exists,VIA ; init VIA1 base address
dc.w SCCRdExists,SCCRd ; init SCC read base address
dc.w SCCWrExists,SCCWr ; init SCC write base address
IF hasIopScc THEN
dc.w SCCIOPExists,SCCRd ; init SCC IOP read base address
dc.w SCCIOPExists,SCCWr ; init SCC IOP write base address
ENDIF
dc.w IWMExists,IWM ; init IWM base address
IF hasIopSwim THEN
dc.w SWIMIOPExists,IWM ; init SWIM IOP base address
ENDIF
IF hasSwim3 THEN
dc.w SWIM3Exists,IWM ; init SWIM3 base address
ENDIF
dc.w PWMExists,PWMBuf1 ; init primary PWM buffer
dc.w PWMExists,PWMBuf2 ; init secondary PWM buffer
dc.w SoundExists,SoundBase ; init sound buffer base address
dc.w SCSIExists,SCSIBase ; init SCSI base
dc.w SCSIDackExists,SCSIDMA ; init SCSI Dack base
dc.w SCSIHskExists,SCSIHsk ; init SCSI Dack base
IF hasMac2VIA2 | hasEclipseVIA2 THEN
dc.w VIA2Exists,VIA2 ; init VIA2 base address
ENDIF
IF hasASC THEN
dc.w ASCExists,ASCBase ; init ASC base address
ENDIF
IF hasRBV THEN
dc.w RBVExists,RBV ; init RBV base address
ENDIF
dc.w SCSIDMAExists,SCSIBase ; init SCSI DMA base addresses
dc.w SCSIDMAExists,SCSIDMA ; init SCSI DMA base addresses
dc.w SCSIDMAExists,SCSIHsk ; init SCSI DMA base addresses
IF hasOSS THEN
dc.w OSSExists,OSS ; init OSS base address
ENDIF
dc.w -1 ; end of list
@exit
; Setup miscellaneous low mem SCSI addresses
; Existing Mac SCSI systems are either 80-base or 96-based
;
; a0 -> base of address table
; d0 -> Addresses Map Flags, which system addresses are valid
SetupMiscSCSI
IF hasSCSI96 THEN
btst.l #SCSI96_1Exists, d0 ; see if we have 1st SCSI96
beq.s @2ndSCSI96 ; bra. if not
move.l SCSI96Addr1(a0), SCSIBase ; initialize the low mem <SM82>
@2ndSCSI96
btst.l #SCSI96_2Exists, d0 ; see if we have 2nd SCSI96
beq.s @80based ;
move.l SCSI96Addr2(a0), SCSI2Base ; initialize the low mem <SM82>
bra.s @SCSIHskDone
@80based
ENDIF
btst.b #6, ($2400)
bne.b @SCSIHskDone
btst.l #SCSIDackExists,d0 ; see if we have SCSI Dack
bne.s @SCSIDackDone ; if we do, it's setup ok
move.l SCSIHsk,SCSIDMA ; if not, use hsk instead
@SCSIDackDone
btst.l #SCSIHskExists,d0 ; see if we have SCSI Hsk
bne.s @SCSIHskDone ; if we do, it's setup ok
move.l SCSIDMA,SCSIHsk ; if not, use Dack instead
@SCSIHskDone
movem.l (sp)+,d1/d2
rts ; all done
endwith
;________________________________________________________________________________________
;
; Routine: InitSlots 992
;
; Inputs: none
; Outputs: none
; Trashes: D0, A0
;
; Function: initializes the slot dispatch table, gives the Slot Manager its wakeup call,
; and grays the screen for devices with video cards
;________________________________________________________________________________________
InitSlots BSR.L InitSDTbl ; init slot int dispatch table
BSR.L InitVBLQs ; init VBLqueues for all slots
BSR.L StartSDeclMgr ; init the slot manager
BNE.S @SlotError ; branch if an error occurred
RTS
@SlotError MOVE.L D0,D6 ; save error code
MOVEQ #$1F,D7 ; NuMac Error
BRA Critical ; Critical error
;________________________________________________________________________________________
;
; Routine: InitDeviceMgr 9b0
;
; Inputs: none
; Outputs: none
; Trashes: ???
;
; Function: initializes the I/O system by building the Unit Table
;________________________________________________________________________________________
InitDeviceMgr ; Compute the size of the unit table and allocate it.
MOVEQ #UnitEntries,D0 ; get number of entries in unit table
MOVE.W D0,UnitNtryCnt ; save for IOCore checking
MOVE.L #MaxUTEntries*2,D0 ; reserve more memory so table can grow <SM84>
_NewPtr ,SYS,CLEAR ; allocate it and zero out the memory
MOVE.L A0,UTableBase ; and save its address
rts
;________________________________________________________________________________________
;
; Routine: LoadDrivers 9c4
;
; Inputs: none
; Outputs: none
; Trashes: ???
;
; Function: issues initialization calls to all the component drivers.
;________________________________________________________________________________________
LoadDrivers
;
;ÑÑÑÑÑÑÑÑÑ Floppy Driver ÑÑÑÑÑÑÑÑÑ
;
LEA -IOQElSize(SP),SP ; allocate parameter block for device manager calls
MOVE.L SP,A0
CLR.B IOPermssn(A0) ; r/w permissions
;
;ÑÑÑÑÑÑÑÑÑ RAM Disk Driver ÑÑÑÑÑÑÑÑÑ
;
; if we don't have an EDisk driver, this will not affect anything
; to enable the EDisk, make sure that it is included in the rom resources
IF hasEDisk THEN
LEA.L EDiskName,A1
MOVEQ.L #$30,D2 ; and resource ID <SM84>
BSR InstallDriver ; go install the driver <SM84>
ENDIF
;
;ÑÑÑÑÑÑÑÑÑ LAN Disk Driver ÑÑÑÑÑÑÑÑÑ
;
IMPORT InterC_1890_InitLANDisk
BSR InterC_1890_InitLANDisk
;
;ÑÑÑÑÑÑÑÑÑ BCScreen Driver ÑÑÑÑÑÑÑÑÑ
;
IF hasBCScreen THEN
SubQ.L #$2, sp
Move.L sp, -(sp)
Move.L #$3FF, -(sp)
Move.L #$36, -(sp)
Clr.L -(sp)
Pea.L BCScreenName
Move.L #$FFFFBF7D, -(sp)
IMPORT Interstix208c_1
BSR.L Interstix208c_1
dc.w $defc, $001a
;AddA #$1A, A7
ENDIF
;
;ÑÑÑÑÑÑÑÑÑ Backlight Driver ÑÑÑÑÑÑÑÑÑ
;
IF hasPwrControls THEN
BTst.B #$0, (HWCfgFlags)
BEQ.B @noBacklight
BTst.B #$6, ($2409)
BNE.B @noBacklight
Move.L #'only', -(A7)
LEA.L BacklightName,A1 ; get the backlight driver's name <SM84>
MOVE.W #-16511,D2 ; and resource ID <SM84>
BSR InstallDriver ; go install the driver <SM84>
AddQ #$4, A7
@noBacklight
MoveA.L A7, A0
Clr.B $1B(A0)
Bsr (* + $128)
Lea.L $32(A7), A7
BTst.B #$6, ($2409)
BEQ.B @skipALine
import InterC_1f40_Backlight
Bsr.L InterC_1f40_Backlight
@skipALine
BTst.B #$3, ($DD3)
BEQ @exitDrivers
ENDIF
;
;ÑÑÑÑÑÑÑÑÑ Serial Drivers ÑÑÑÑÑÑÑÑÑ
;
; The ROM serial driver is stored in a resource of type 'SERD'. The classic serial driver
; is 'SERD' (0) and the SerialDMA serial driver is 'SERD' (1). Which serial driver to use
; is indicated by a bit in Universal ProductInfo. A 'SERD' resource is a code resource
; whose entry point is an installation procedure. A 'SERD' installs itself into the unit
; table, remaining closed and inactive until opened by a client.
subq #4,sp ; allocate space for return value
move.l #'nsrd',-(sp) ; push serial driver resource type
move.w #1,-(sp) ; SerialDMA driver is 'SERD' (1)
move.w #mapTrue,ROMMapInsert ; get resource from ROM
_GetResource
move.l (sp)+,d0 ; did it get the handle?
beq.b @exitDrivers
movea.l d0,a2
movea.l (a2),a1
SubQ #$4, A7
Move.L A2, -(A7)
dc.w $a9a5 ; _SizeResource
Move.L (A7)+, D1
Move.L D1, D0
dc.w $A440 ; _ResrvMemSys
Move.L D1, D0
_NewHandle ,Sys
Move.L A0, D0
BEQ.B (* + $E)
_HLock
Move.L D1, D0
MoveA.L (A0), A1
MoveA.L (A2), A0
_BlockMove
jsr (a1) ; call the install code
@exitDrivers
rts
STRING PASCAL
SndName DC.W '.Sound' ; <SM83>
IF hasEDisk THEN
EDiskName DC.W '.EDisk' ; <SM83>
ENDIF
IF hasNewAge THEN
NewAgeName DC.W '.NewAge' ; <SM16>
ENDIF
IF hasNetBoot THEN
NetBootName DC.W '.netBOOT'
ENDIF
IF hasPwrControls THEN
BacklightName
DC.W '.Backlight'
ENDIF
IF hasBCScreen THEN
BCScreenName
DC.W '.BCScreen'
ENDIF
STRING ASIS
*************************************************************************************************
* *
* V I D E O R O U T I N E S *
* *
*************************************************************************************************
;________________________________________________________________________________________
;
; Routine: DrawBeepScreen ab0
;
; Inputs: A5 - pointer to QuickDraw globals in boot globals space
;
; Outputs: none
;
; Trashes: D0-D2, A0-A1
;
; Function: Grays the screen (with rounded corners on non-LCD screens) using Horst's
; patented methods. The use of QuickDraw here forces existance of a temporary
; app heap during system initialization time.
;________________________________________________________________________________________
DrawBeepScreen
PEA -4(A5) ; set up QuickDraw global area
_InitGraf
PEA BootGlobals.port(a5) ; let Grafport be above A7, A5 <SM56>
_OpenCPort ; open default COLOR port (closed in StartBoot)
MOVE.L (A5),A2 ; point to QuickDraw globals
PEA arrow(A2) ; show the arrow cursor
_SetCursor
IF hasPwrControls THEN ; <SM81>
; if built-in video is an LCD screen, use square corners to avoid "eyebrows" on the top ends
; of the menu bar (because the screen background is white on LCD screens vs black on CRTs)
BSR.L LCDScreenChk ; is this an LCD screen ? <SM16><SM68>
BEQ.B @DoNormalBeepScreen ; -> no, do the normal stuff <SM16><SM68>
Clr.B ($B3E)
Pea.L -$74(A2)
Clr.B -(A7)
Jsr (* + $204A)
Tst.B (A7)+
BNE.B (* + $8)
Pea.L -$18(A2)
Bra.B (* + $14)
MoveA.L ($2b6), A0
ST.B $341(A0)
Pea.L (* + $62)
_RGBForeColor
Pea.L -$10(A2)
_FillRect
MoveQ.L #$5, D0
DC.W $ABE0
RTS
@DoNormalBeepScreen
ENDIF ; <SM81>
; for normal screens (CRTs), draw the screen with rounded corners
LEA ScreenBits+bounds+8(A2),A0 ; make a copy of the screen rectangle
LEA TempRect+8,A1
MOVE.L -(A0),-(A1)
MOVE.L -(A0),-(A1)
MOVE.L A0,-(SP) ; push the screen rectangle for FillRoundRect
MOVE.L A1,-(SP) ; push the copy for FrameRoundRect
MOVE.L A1,-(SP) ; and for InsetRect
MOVE.L #$FFFDFFFD,-(SP) ; make the rectangle bigger by 3 on each side
_InsetRect
MOVE.L #$00030003,-(SP) ; make pen 3 pixels wide.
_PenSize
MOVE.L #$00160016,-(SP) ; rounding factor ($00100010 + 2 * $00030003)
_FrameRoundRect ; draw black corners without flicker
_PenNormal ; restore the pen
Pea.L (* + $24)
_RGBForeColor
Move.L #$100010, -(A7)
Pea.L -$10(A2)
Bra.B (* + $C)
DC.L $2F3C0010 ; '/< '
DC.L $0010486A ; ' Hj'
DC.W $FFE8 ; ' '
_FillRoundRect
MoveQ.L #$5, D0
DC.W $ABE0
RTS
;________________________________________________________________________________________
;
; Routine: FROVideo b54
;
; Inputs: A0 - pointer to ioParamBlock
;
; Outputs: none
;
; Trashes: D0-D2, A0-A2
;
; Function: finds, reads parameters for, and opens the driver for a video sRsrc
;________________________________________________________________________________________
DC.W $8888, $8888, $8888
WITH spBlock,seBlock,vpBlock
FROVideo MOVE.L A0,A1 ; save the param block pointer for _Open
LINK A6,#-spBlockSize ; allocate space for a slot parameter block
MOVE.L SP,A0 ; and point to it
BTST.B #6, ($240B)
BEQ.B @TryDefault
MoveM.L D0-D7/A0-A4, -(A7)
Move.L ($1FB8), -(A7)
MoveA.L ($2b6), A3
MoveA.L $1E0(A3), A3
Move.L $C(A3), -(A7)
Lea.L (* + $28A), A2
Move.L A2, ($1FB8)
Move.L A2, $C(A3)
SubQ #$2, A7
Clr.L -(A7)
Move #$2EB, D0
_DisplayDispatch
Move (A7)+, D0
MoveA.L ($2b6), A3
MoveA.L $1E0(A3), A3
Move.L (A7)+, $C(A3)
Move.L (A7)+, ($1FB8)
Tst D0
MoveM.L (A7)+, D0-D7/A0-A4
BNE.B @End
@TryDefault
BSR OpnVidDeflt ; open the default video device, set video params
BEQ @End ; -> got it
; the default video device is bad, so go search for a video sRsrc...
MOVE.L #(CatDisplay<<16) ++ TypVideo, spCategory(A0) ; stuff Category and Type, looking
; for an Apple compatible video card
MOVE.W #DrSwApple,spDrvrSw(A0) ; want Apple driver software interface
MOVE.B #1,spTBMask(A0) ; mark spDrvrHw field as donÕt care
CLR.B spSlot(A0) ; start with slot #0
CLR.B spId(A0) ; start with sResource ID #0
CLR.B spExtDev(A0) ; no external devices
; keep looking for a video driver until we find one that we can open...
@NextVidsRsrc
_sNextTypesRsrc ; search for a video sRsrc
BNE @End ; -> couldn't find one, so allocate a dummy screen
BSR OpensDrvr ; open the video driver
BNE.S @NextVidsRsrc ; -> couldn't do it, so go look some more
MOVE $18(A1), -(SP)
BSR RdVidParam ; read the video parameters
TST D0
BNE.S @NextVidsRsrc ; -> error, so go search some more
BSR InitVidDeflt ; initialize the default video device
BNE.S @NextVidsRsrc ; -> error during initialization, so go looking
BRA.S @End
BSR InitDummyScreenWrapper
@End UNLK A6 ; get rid of the slot parameter block
RTS
;________________________________________________________________________________________
;
; Routine: OpnVidDeflt bfa
;
; Inputs: A0 - pointer to Slot Manager parameter block
; A1 - pointer to ioParamBlock
;
; Outputs: CCR - BEQ if successful, BNE if failure
;
; Trashes: D0-D2, A2
;
; Function: opens the default video device
;________________________________________________________________________________________
OpnVidDeflt MOVE.L A0,A2 ; save A0
SUBQ.W #2,SP ; allocate space for parameter RAM info
MOVE.L SP,A0 ; and point to it
_GetVideoDefault ; get the default video info
MOVE.B (A0)+,spSlot(A2) ; save the slot number
MOVE.B (A0)+,spId(A2) ; and ID
ADDQ.W #2,SP ; (clean up the stack)
MOVE.L A2,A0 ; restore A0
CLR.B spExtDev(A0) ; no external devices
_sRsrcInfo ; get the sResource Type
BNE.S @Error ; -> error
CMP.L #(CatDisplay<<16) ++ TypVideo,spCategory(A0) ; are the category and type correct?
BNE.S @Error ; -> no, keep on searching
CMP.W #DrSwApple,spDrvrSW(A0) ; does it have an Apple driver interface (software only)?
BNE.S @Error ; -> no, keep on searching
BSR OpensDrvr ; open the video driver
BNE.S @Error ; -> couldn't do it
MOVE $18(A1), -(SP)
BSR RdVidParam ; a video sRsrc was found, so read the video parameters
TST D0
BNE.S @Error ; -> error during the read
BSR InitVidDeflt ; initialize the default video device
@Error RTS
;________________________________________________________________________________________
;
; Routine: RdVidParam c42
;
; Inputs: A0 - pointer to Slot Manager parameter block
; A1 - pointer to ioParamBlock
;
; Outputs: CCR - BEQ if successful, BNE if failure
;
; Trashes: D0
;
; Function: Searches the video card ROM for expected video parameters. These values are
; then saved in low memory as needed.
;________________________________________________________________________________________
RdVidParam LINK A6, #-$94
MOVEM.L A0-A2/D3,-(SP)
MOVE.B spId(A0),D3 ; save the ID
CLR.B spExtDev(A0) ; no external devices
_sRsrcInfo ; get a pointer to the sRsrc list
BNE @Error
_sFindDevBase ; get the device base address
BNE @Error ; -> error
MOVE.L spResult(A0),ScrnBase ; save it as screen base.
MOVE.B #MinorLength,spId(A0)
_sReadLong ; get the total number of bytes occupied by screen sRsrc
BEQ @gotBase ; got it, save away
MOVE.B #MajorLength,spId(A0) ; else, try major length (some don't support minor length) <SM144>
_sReadLong ; get the total number of bytes occupied by screen sRsrc <SM144>
BNE @Error ; -> couldn't find it <SM144>
@gotBase MOVE.L spResult(A0),ScreenBytes ; save it
MOVE.B D3,spId(A0) ; restore the sRsrc ID
MOVE $18(A1), -(SP)
BSR GetDefVidMode ; get the default video mode
MOVE.B D0,spId(A0) ; and save it
_sFindStruct ; go look up the default video mode
BNE @Error ; -> default mode is not supported
MOVE.B #mVidParams,spId(A0) ; ID for video sBlock
_sGetBlock ; go get it
BNE @Error ; -> not found
MOVE.L spResult(A0),A1 ; save the pointer to the parameter block
; save required parameters in low memory globals:
MOVE.W vpBounds+4(A1),ColLines ; screen height
MOVE.W vpBounds+6(A1),RowBits ; screen width
MOVE.W vpRowBytes(A1),D0 ;
MOVE.W D0,ScreenRow ; screen rowBytes
MOVE.W D0,CrsrRow ; cursor's screen rowBytes
MOVE.W vpVRes(A1),ScrVRes ; vertical resolution
MOVE.W vpHRes(A1),ScrHRes ; horizontal resolution
MOVE.L vpBaseOffset(A1),D0 ; update the screen base
ADD.L D0,ScrnBase
MOVE.L ScrnBase,CrsrBase ; and the cursor base address
MOVEQ #0,D0
MOVE.B spSlot(A0),D0 ; get the slot number
_AttachVBL ; setup the VBL connection for the main video card
MOVE.L #VideoMagic,VideoInfoOK ; show that the video info is available
MOVE.L A1,spsPointer(A0) ; pointer to parameter block
_sDisposePtr ; all done, dispose it
MOVEQ #0,D0 ; no errors
@End MOVE.B D3,spId(A0) ; restore ID for caller
MOVEM.L (SP)+,A0-A2/D3
UNLK A6
RTD #2
@Error MOVEQ #1,D0 ; bad video card (woof)
BRA.S @End
;________________________________________________________________________________________
;
; Routine: OpensDrvr d0a
;
; Inputs: A0 - pointer to Slot Manager parameter block
; A1 - pointer to ioParamBlock
;
; Outputs: CCR - BEQ if successful, BNE if failure
;
; Trashes: D0-D1
;
; Function: opens a slot driver
;________________________________________________________________________________________
OpensDrvr MOVE.L A2,-(SP)
LEA -seBlockSize(SP),SP ; allocate an sExec parameter block,
MOVE.L SP,A2 ; point to it,
MOVE.L A2,spsExecPBlk(A0) ; and save a copy in the slot PB
LEA -256(SP),SP ; allocate space for the driver's name
MOVE.L SP,spResult(A0) ; and save it in the PB
_sReadDrvrName ; read the name of the driver
BNE.S @End ; -> error
MOVE.L spResult(A0),seIOFileName(A2) ; name of driver, for seBlock
MOVE.B spSlot(A0),seSlot(A2) ; slot,
MOVE.B spId(A0),sesRsrcId(A2) ; sRsrc,
CLR.B seDevice(A2) ; and device,
MOVE.L seIOFileName(A2),ioFileName(A1) ; copy the driver name pointer to ioFileName.
CLR.L ioMix(A1) ; this field should be 0
CLR.W ioFlags(A1) ; clear the flags
BSET.B #fMulti,ioFlags+1(A1) ; set the Multi bit
MOVE.L A2,ioSEBlkPtr(A1) ; point to the seBlock (for sLoad record)
CLR.B ioPermssn(A1) ; R/W permissions
EXG.L A0,A1 ; A0=pointer to ioParamBlock, A1=pointer to slot PB
_Open ,IMMED ; open the video driver, using the extended parameter block
; (keep error code and CCR through to RTS)
EXG.L A0,A1 ; restore A0,A1
@End LEA 256+seBlockSize(SP),SP ; clean up the stack
MOVE.L (SP)+,A2
RTS
;________________________________________________________________________________________
;
; Routine: InitVidDeflt
;
; Inputs: A0 - pointer to Slot Manager parameter block
; A1 - pointer to ioParamBlock
;
; Outputs: none
;
; Trashes: D0-D1
;
; Function: allocates a GDevice for the default video device
;________________________________________________________________________________________
InitVidDeflt
MOVEM.L D1-D2/A0-A3,-(SP) ; save all registers
SubQ #$4, A7
MoveA.L A7, A2
Move $18(A1), -(A7)
Bsr GetDefVidMode
Move.L ($1FB8), -(A7)
MoveA.L ($2b6), A3
MoveA.L $1E0(A3), A3
Move.L $C(A3), -(A7)
Lea.L InitVidDeflt_RTS, A3
Move.L A3, ($1FB8)
Move.L A3, (12)
SubQ #$4, A7
MoveA.L A7, A3
SubQ #$2, A7
Move.L A3, -(A7)
Move $18(A1), -(A7)
Move.L D0, -(A7)
Clr.L -(A7)
Clr.L -(A7)
Clr.L -(A7)
Clr.L -(A7)
Move #$D23, D0
_DisplayDispatch
Move (A7)+, D0
MoveA.L (A7)+, A3
Tst D0
BNE.B @skip
SubQ #$2, A7
Move.L A3, -(A7)
Move.L A2, -(A7)
Clr.B -(A7)
Move #$51F, D0
_DisplayDispatch
Tst (A7)+
BNE.B @skip
SubQ #$2, A7
Move.L A3, -(A7)
Clr.L -(A7)
Move #$40B, D0
_DisplayDispatch
Tst (A7)+
BNE.B @skip
SubQ #$2, A7
Move.L (A2), -(A7)
Move.L A2, -(A7)
Clr.B -(A7)
Move #$520, D0
_DisplayDispatch
Tst (A7)+
BNE.B @skip
MoveA.L (A2), A0
@skip
MoveA.L ($2b6), A3
MoveA.L $1E0(A3), A3
Move.L (A7)+, $C(A3)
Move.L (A7)+, ($1FB8)
AddQ #$4, A7
BSR InitDefGamma ; initialize gamma correction for this device
MOVEM.L (SP)+,D1-D2/A0-A3 ;restore all registers
MOVEQ #0,D0 ;no error
RTS
InitVidDeflt_RTS
RTS
;________________________________________________________________________________________
;
; Routine: GetDefVidMode
;
; Inputs: A0 - pointer to Slot Manager parameter block
;
; Outputs: D0 - default video mode
;
; Trashes: none
;
; Function: returns the default video mode for the device specified in the slot PB
;________________________________________________________________________________________
GetDefVidMode
LINK A6, #-$58
MOVE.L spsPointer(A0),-(SP) ; save the sPointer,
MOVE.B spId(A0),-(SP) ; the id,
MOVEM.L A1-A2,-(SP) ; and registers
LEA -SizesPRAMRec*3(A6),A1 ; make room for parameter RAM info
MOVE.L A1,(A0) ; and point to it
_SReadPRAMRec ; get parameter RAM record
BNE.S @OneBit ; -> it's invalid, so default to one bit mode
CLR.B spExtDev(A0) ; no external devices
_sRsrcInfo ; get a pointer to the sResource list
BNE.S @OneBit ; -> error
MOVE.B 2(A1),spId(A0) ; check for a valid mode
_sFindStruct
BNE.S @OneBit ; -> not valid
MOVEQ #0,D0
MOVE.B 2(A1),D0 ; get the default mode
@ValidMode MOVEM.L (SP)+,A1-A2 ; restore registers,
MOVE.B (SP)+,spId(A0) ; the id,
MOVE.L (SP)+,spsPointer(A0) ; and the sPointer
UNLK A6
RTD #2
@OneBit MOVE.B #OneBitMode,2(A1) ; Set default to OneBitMode
MOVE.L A1,spsPointer(A0) ; Pass pointer to buffer
_SPutPRAMRec ; Save parameter RAM record
MOVE.L #OneBitMode,D0 ; Assume one bit mode
BRA.S @ValidMode ; Branch if mode is valid
;________________________________________________________________________________________
;
; Routine: InitDefGamma e64
;
; Inputs: A0 - handle to GDevice
;
; Outputs: none
;
; Trashes: D0, A0, A1
;
; Function: Sets the default gamma correction table for the device. This routine is
; updated to look in the video card's gamma directory for the default gamma
; table. If a gamma directory is not found, then this routine leaves the
; gamma table unchanged from its default. If the card is an original Mac II
; Video Card (TFB card), then it sets the default gamma from the ROM resource.
; For all other cards it leaves the gamma table unchanged if a directory is
; not found.
;________________________________________________________________________________________
IOPBlk EQU -IOVQElSize ; [64] parameter blk for I/O calls
VidParms EQU IOPBlk-12 ; [12] size of mode params
VARSIZE EQU VidParms ; size of locals
InitDefGamma
LINK A6,#VARSIZE ; allocate local stack frame
MOVEM.L A2/A3,-(SP) ; save work registers
MOVE.L A0,A2 ; save GDevice
; find the video sRsrc list based on the gDevice's gdRefnum.
MOVE.L (A2),A1 ; de-reference the GDevice handle
MOVE.W gdRefNum(A1),D0 ; and get the device's refnum
NOT.W D0 ; invert it to make an index
MOVE.L UTableBase,A1 ; get the unit table base
MOVE.L (A1,D0*4),A1 ; get DCE handle
MOVE.L (A1),A1 ; and de-reference it
LEA -spBlockSize(SP),SP ; allocate a Slot Manager parm block
MOVE.L SP,A0 ; and point to it
MOVE.B dCtlSlot(A1),spSlot(A0) ; slot number
CLR.W spID(A0) ; zero spID, spExtDev
MOVE.W #CatDisplay,spCategory(A0) ; look for this slot's card
MOVE.W #TypVideo,spCType(A0)
MOVE.W #DrSwApple,spDrvrSW(A0)
MOVE.B #1,spTBMask(A0) ; mark spDrvrHw field as donÕt care
_sNextTypesRsrc ; get the spsPointer
BNE.S @Error ; -> couldn't get it
CMP.W #DrHwTFB,spDrvrHW(A0) ; is this a TFB card?
BEQ.S @DoTFB ; -> yup, so get the gamma resource from ROM
; get the default gamma from the video card's gamma directory. Keep the temp handle in A3
MOVE.B #sGammaDir,spID(A0) ; look for the gamma directory
_sFindStruct ; get that baby
BNE.S @Error ; -> not present
MOVE.B #128,spID(A0) ; get the default gamma table, (always 128)
_sReadPBSize ; read the physical block size
BNE.S @Error ; -> not present <SM60>
MOVE.L A0,A3 ; save the slot parameter block for a second
MOVE.L spSize(A0),D0 ; get the table size
_NewHandle ; allocate it
BNE.S @Error ; if you couldn't get it, then bail out <SM60>
_HLock ; lock it down
EXG.L A0,A3 ; get handle in A3, spBlock back in A0
MOVE.L (A3),A1 ; get pointer to the block
MOVE.L A1,spResult(A0) ; point slot manager toward this buffer
SUBQ.W #4,spSize(A0) ; subtract block header from size
_sReadStruct ; read the data into the handle
BNE @Error ; something went wrong <SM60>
MOVE.L spResult(A0),A0 ; get gamma table ptr in A0
; skip over header
ADDQ.W #2,A0 ; skip resID
@Name TST.B (A0)+ ; skip over gamma name
BNE.S @Name
MOVE.L A0,D0
ADDQ.L #1,D0 ; round up the pointer
ANDI.B #$FE,D0 ; and word-align it
MOVEA.L D0,A0 ; then put it back in A0
; now call the driver to set this gamma table (handle on stack)
@SetIt LEA VidParms(A6),A1 ; point to params for SetGamma
MOVE.L A0,csGTable(A1) ; gamma table pointer is only param
LEA IOPBlk(A6),A0 ; point to parameter block
MOVE.L A1,csParam(A0) ; move addr of parms into block
MOVE.W #4,csCode(A0) ; csc_SetGamma
CLR.L ioCompletion(A0) ; no completion routine
CLR.W ioVRefNum(A0) ; no volRefNum
MOVE.L (A2),A1 ; point to gdevice
MOVE GDRefNum(A1),ioRefNum(A0) ; set device's refnum
_Control ,IMMED ; SetGamma(GammaTable);
MOVE.L A3,A0 ; get handle to gamma table
_HUnlock ; unlock the gamma table
_DisposHandle ; and get rid of it
@Error ADDA #spBlockSize,SP ; release the slot parameter block
MOVEM.L (SP)+,A2/A3 ; restore all registers
UNLK A6 ; strip stack frame
RTS
; get the default gamma table from ROM
@DoTFB SUBQ #4,SP ; make room for function result
MOVE.L #'gama',-(SP) ; push gamma table rsrc type
CLR -(SP) ; get 'gama' resource 0
MOVE.W #MapTRUE,ROMMapInsert ; get from ROM
_GetResource ; try to read in gamma table
MOVE.L (SP),-(SP) ; push a copy
_DetachResource ; make it a handle
MOVE.L (SP)+,A0 ; get handle to gamma table
_HLock ; lock down the gamma table
MOVE.L A0,A3 ; remember it in A3
MOVE.L (A0),A0 ; get gamma table ptr in A0
BRA.S @SetIt ; set it
InitDummyScreenWrapper ; f52
MOVE.L (DeviceList), D0
BEQ.B InitDummyScreen
CMPI.L #$FFFFFFFF, D0
BEQ.B InitDummyScreen
RTS
;________________________________________________________________________________________
;
; Routine: InitDummyScreen f62
;
; Inputs: none
; Outputs: none
; Trashes: D0-D2, A0-A1
;
; Function: allocates all the necessary structures for operation without a screen device
;________________________________________________________________________________________
; First allocate bits for a dummy screen. Make it 32*32 just for fun!
InitDummyScreen
MOVEQ #32,D0 ; get height of screen
MOVE.W D0,ColLines ; save number of columns
MOVE.W D0,RowBits ; save number of rows
MOVEQ #4,D0 ; get byte width of screen
MOVE.W D0,ScreenRow ; save rowbytes of screen
MOVE.W D0,CrsrRow ; save rowbytes of cursor
MOVEQ #(32*4)/2,D0 ; get size of screen
ADD.L D0,D0
MOVE.L D0,ScreenBytes ; save size of screen
_NewPtr ; allocate screen memory
MOVE.L A0,ScrnBase ; save base of screen
MOVE.L A0,IconTLAddr ; save base for icon
MOVE.L A0,CrsrBase ; save base for cursor
MOVEQ #$0048,D0 ; get screen resolution
MOVE.W D0,ScrHRes ; save horiz resolution
MOVE.W D0,ScrVRes ; save vert resolution
; allocate a dummy GDevice, and set up all devices
CLR.L -(SP) ; make room for result
CLR -(SP) ; no refNum
MOVEQ #-1,D0 ; get mode = -1
MOVE.L D0,-(SP) ; and push mode -1
_NewGDevice ; allocate and init GDevice
MOVE.L (SP)+,A0 ; get gDevice
MOVE.L A0,theGDevice ; set theGDevice
MOVE.L A0,DeviceList ; set head of device list
MOVE.L A0,MainDevice ; set as first device
MOVE.L A0,SrcDevice ; set as src device
MOVE.L A0,CrsrDevice ; and as cursor device
; initialize the GDevice's pixMap
MOVE.L (A0),A1 ; point to gdevice
MOVE #4,GDResPref(A1) ; set preferred resolution
MOVE.W #(1<<screenActive)|\ ; flags: in use
(1<<noDriver)|\ ; no driver for this GDevice
(1<<screenDevice)|\ ; screen device [not used]
(1<<allInit)|\ ; all devices initialized
(1<<mainScreen)|\ ; main screen
(1<<ramInit),GDFlags(A1) ; initialized from 'scrn' resource
MOVEQ #32,D0 ; get height and width
MOVE D0,GDRect+bottom(A1) ; get the device rectangle's bottom and right
MOVE D0,GDRect+right(A1)
MOVE.L GDPMap(A1),A0 ; get handle to pixMap
MOVE.L (A0),A0 ; point to pixMap
MOVE.L scrnBase,baseAddr(A0) ; set base address
MOVE screenRow,rowBytes(A0) ; set rowbytes
MOVE D0,bounds+right(A0) ; set bounds
MOVE D0,bounds+bottom(A0) ; right and bottom
MOVEQ #$48,D0 ; get resolution
SWAP D0 ; put in high word for fixed
MOVE.L D0,hRes(A0) ; save as horizontal res
MOVE.L D0,vRes(A0) ; and as vRes
MOVEQ #1,D0 ; get a useful number
MOVE D0,pixelSize(A0) ; pixelSize = 1
MOVE D0,cmpCount(A0) ; cmpCount = 1
MOVE D0,cmpSize(A0) ; cmpSize = 1
; set the GDevice's color table to be one bit per pixel
MOVE.L pmTable(A0),A0 ; get handle to color table
MOVE.L (A0),A0 ; and point at that puppy
MOVEQ #1,D1 ; get a useful number
MOVE.L D1,(A0)+ ; CTSEED := 1
MOVE.L D1,(A0)+ ; TransIndex := 0, CTSize := 1
CLR (A0)+ ; entry 0: value := 0
MOVEQ #-1,D0 ; set entry 0 to white
MOVE.L D0,(A0)+ ; set R,G
MOVE D0,(A0)+ ; and B
SWAP D1 ; D1 = $00010000
MOVE.L D1,(A0)+ ; entry1: value := 1, R = 0
CLR.L (A0)+ ; set G, B
RTS
;________________________________________________________________________________________
;
; Routine: AddVidDevice 101c
;
; Inputs: A0 - pointer to Slot Manager parameter block
; A1 - pointer to ioParamBlock
;
; Outputs: CCR - BEQ if successful, BNE if failure
;
; Trashes: D0-D1
;
; Function: allocates a GDevice for a video device and installs it in the device list
;________________________________________________________________________________________
AddVidDevice
MOVEM.L D1-D2/A0-A3,-(SP) ; save work registers
; scan for end of chain of grafDevices
; in case already opened, check if this refNum already installed
MOVE ioRefNum(A1),D1 ; get refNum of the opened device
MOVE.L DeviceList,D0 ; get head of device list
@NextDev MOVE.L D0,A2 ; save handle to current device
MOVE.L (A2),A3 ; point to current device
CMP GDRefNum(A3),D1 ; does the refNum match?
BEQ.S @End ; =>yes, already installed (default device)
MOVE.L GDNextGD(A3),D0 ; get handle of next device in chain
BNE.S @NextDev ; there is one, keep looking
; allocate and initialize a grafDevice for this device
CLR.L -(SP) ; make room for GrafDevice handle
MOVE ioRefNum(A1),-(SP) ; push the device's refNum
BSR.S GetDefVidMode ; D0 <- the default video mode
MOVE $18(A1), -(SP)
MOVE.L D0,-(SP) ; Push it
_NewGDevice ; allocate a new GrafDevice (in system heap)
MOVE.L (A2),A0 ; get pointer to device at end of list
MOVE.L (SP),GDNextGD(A0) ; save current device at end of list
MOVE.L (SP),A0 ; get the new device's handle
MOVE.L (A0),A0 ; point to the new device
ORI.W #(1<<screenDevice),GDFlags(A0) ; set flag: ScreenDevice
MOVE.L (SP)+,A0 ; device already on stack
BSR InitDefGamma ; initialize gamma correction for this device
@End MOVEM.L (SP)+,D1-D2/A0-A3 ; restore all registers
MOVEQ #0,D0 ; no error
RTS
ENDWITH ; {spBlock,seBlock,vpBlock}
*************************************************************************************************
* *
* M A C H I N E / F E A T U R E S P E C I F I C R O U T I N E S *
* *
*************************************************************************************************
;________________________________________________________________________________________
;
; Routine: InitSCC 1066
;
; Inputs: none
; Outputs: none
; Trashes: A0, A1
;
; Function: resets both channels of the SCC
;________________________________________________________________________________________
InitSCC
IF forRomulator THEN
TestInRam a0 ; check if we're in RAM <SM82>
bne.s @dontInitSCC ; -> don't initialize the SCC if so <SM82>
ENDIF
IF hasIopScc THEN
TestFor SCCIOPExists ; see if we have an SCC IOP
bz.b @NoIOP ; if not, donÕt try to initialize it
bsr.l SCCIOPHwInit ; initialize the IOP hardware registers
@NoIOP ; fall thru -- IOP boots in bypass mode
ENDIF
btst.b #3, ($DD3)
beq.b @dontInitSCC
movea.l SCCWr,a0 ; point to SCC base write address (chan B)
movea.l SCCRd,a1 ; point to SCC base read address (chan B)
tst.b (a1) ; synchronize SCC accesses
move.b #9,(a0) ; select write register 9
move.b #$C0,(a0) ; hardware reset both channels
@dontInitSCC ; <SM82>
rts
;________________________________________________________________________________________
;
; Routine: InstallDriver 1082
;
; Inputs: A1 - pointer to driver name string (pascal)
; D2 - driver's resource ID
;
; Outputs: none
;
; Trashes: D0-D2, A0-A2
;
; Function: gets a driver from the ROM, and installs and opens it in the first available
; slot after entry 48
;________________________________________________________________________________________
InstallDriver
move.l a1,a2 ; move name ptr to a2 for safe keeping
bsr.s GetDetachDRVR ; get and detach resource (d1,d1/a1)
beq.s @exit ; exit if no handle
bsr.s FirstEntryFree ; get ref num of first free entry (/d0,d1)
_DrvrInstall ; create dce (d0/d0)
tst.l d0 ; test for error
bne.s @releaseDrvr ; ... exit if error
move.l UTableBase,a0 ; point to utable array
move.l (a0,d1),a0 ; get handle to dce in a3
move.l (a0),a0 ; get pointer to dce
move.l (a1),dCtlDriver(a0) ; load driver
move.l (a1),a1 ; get pointer to driver
move.w drvrFlags(a1),dCtlFlags(a0) ; copy data to dce
move.w drvrDelay(a1),dCtlDelay(a0)
move.w drvrEMask(a1),dCtlEMask(a0)
move.w drvrMenu(a1),dCtlMenu(a0)
bclr.b #dNeedLock,dCtlFlags+1(a0) ; set the handle bit
cmpi.l #'only', $4(sp)
beq.b @exit
@openDrvr move.l a2,a1 ; load pointer to driver name
bra.s OpenDRVR ; open the driver (a1/)
@releaseDrvr
move.l a1,a0 ; move handle to a0
_DisposHandle ; release the memory
@exit rts
;________________________________________________________________________________________
;
; Routine: GetDetachDrvr 10ce, GetDetachRes 10d4
;
; Inputs: D1 - resource type (GetDetachRes)
; D2 - driver's resource ID
;
; Outputs: A1 - handle to resource
; CCR - BEQ if successful, BNE if failure
;
; Trashes: D0-D2, A0-A2
;
; Function: gets a driver from the ROM and detaches it
;________________________________________________________________________________________
GetDetachDRVR
MOVE.L #'DRVR',D1
GetDetachRes
MOVE.W #MapTrue,ROMMapInsert ; make sure we can get it from ROM
SUBQ.L #4, SP ; For return address
MOVE.L D1, -(SP) ; Resource type
MOVE.W D2, -(SP) ; Resource ID
_GetResource
MOVE.L (SP), A1 ; Get resource handle to return
BNE.S @NoDetach ; If not found, don't try to detach it
_DetachResource
MOVE.L A1,D0 ; Set result code
RTS
@NoDetach
ADDA.L #4,SP ; recover stack
MOVEQ #0,D0 ; set error
RTS ; return
;________________________________________________________________________________________
;
; Routine: FirstEntryFree 10f2
;
; Inputs: none
;
; Outputs: D0 - driver refNum
;
; Trashes: none
;
; Function: finds the first free entry in the unit table
;________________________________________________________________________________________
StartEntry equ (48-1) ; this avoids AppleTalk area
FirstEntryFree
move.l a0,-(SP) ; save a0
@findEntry move.l UTableBase,a0 ; point to utable array
move.l #(StartEntry*4),d0 ; start at entry (48-1)
@testEntry addq.l #4,d0 ; increment to next entry
tst.l 0(a0,d0) ; test entry
bne.s @testEntry ; if != 0, next entry
@calcRefnum move.l d0,d1
lsr.l #2,d0 ; divide by 4 to get entry number
addq.l #1,d0 ; add 1 (refnum is -(entry number + 1)
neg.l d0 ; negate to get reference number
move.l (SP)+,a0 ; restore a0
rts
;________________________________________________________________________________________
;
; Routine: OpenDRVR 1112
;
; Inputs: A1 - pointer to driver name string (pascal)
;
; Outputs: D0 - driver refNum in high word, Open result in low word
; CCR - BEQ if successful, BNE if failure
;
; Trashes: A0
;
; Function: opens a driver
;________________________________________________________________________________________
OpenDRVR LEA -ioQElSize(SP),SP ; Allocate IO stack frame
MOVE.L SP,A0 ; set a0 to point to the pb
MOVE.L A1,ioVNPtr(A0) ; load pointer to name
MOVE.B #fsCurPerm,ioPermssn(A0) ; set permission (not used)
_Open
MOVE.W ioRefNum(A0),D0 ; return ioRefNum (D0.W:HI)
SWAP D0 ; move ioRefNum HI
MOVE.W ioResult(A0),D0 ; return result (D0.W:LO)
LEA ioQElSize(SP),SP ; Release stack frame
RTS ; Sucess returned in status
IF hasEgret THEN
;________________________________________________________________________________________
;
; Routine: CheckForEgretOrCuda 1132
;
; Inputs: none
;
; Outputs: CCR - BEQ if there is an Egret/Caboose/Cuda of some sort
;
; Trashes: D0
;
; Function: checks if the Egret chip exists
;________________________________________________________________________________________
EXPORT CheckForEgretOrCuda ; so others can use this <T9>
CheckForEgretOrCuda ; <T2>
moveq.l #ProductInfo.ADBMask,d0 ; mask for ADB kind <T2>
and.l UnivRomFlags,d0 ; isolate the field <T2>
subq.l #ProductInfo.ADBEgret,d0 ; see if we have Egret ADB <T2>
beq.s @checkDone ; if we do, go initialize it <T2>
moveq.l #ProductInfo.ClockMask,d0 ; mask for Clock kind <T2>
and.l UnivRomFlags,d0 ; isolate the field <T2>
cmpi.b #ProductInfo.ClockEgret,d0 ; see if we have Egret Clock + PRAM <T2>
@checkDone rts ; <T2>
ENDIF
NewStartInitFunc
; 1148
SubQ.L #$2, A7
MoveA.L A7, A0
Move.L #$20002, D0
_ReadXPRam
Move (A7), D0
AndI #$808, D0
CmpI #$808, D0
BEQ.B @skipwrite
Move #$4F48, (A7)
MoveA.L A7, A0
Move.L #$20002, D0
_WriteXPRam
@skipwrite
Move (A7)+, D0
LsR #$8, D0
AndI #$7, D0
MoveQ.L #$1, D1
LsL.B D0, D1
Move.B D1, (SCSIDrvrs)
Rts
FiddleWithEmulator
; 1180
Move.L #'ppcf', D0
_Gestalt
BNE.B @done
Move.L A0, D0
AndI.L #$10, D0
BEQ.B @done
Move.L #$2000, D0
_NewPtrSysClear
BNE.B @done
Lea.L ($68FFF000).L, A2
Move.L A0, D0
AddI.L #$FFF, D0
AndI.L #$FFFFF000, D0
Move.L D0, $E0(A2)
Move.L #$FE000000, $E8(A2)
Clr.L $EC(A2)
MoveA.L D0, A0
MoveA #$1000, A1
MoveQ.L #$2, D0
_MemoryDispatch
import GETREALPROC
bsr.l GETREALPROC
BMI.B @done
Move.L A0, $E4(A2)
@done
Rts
align 16
end