supermario/base/SuperMarioProj.1994-02-09/OS/EgretMgr.a

2280 lines
87 KiB
Plaintext
Raw Normal View History

2019-06-29 15:17:50 +00:00
;
; File: EGRET Manager.a
;
; Contains: Contains low level code to support sending and receiving
; packets (ADB, Pseudo Commands, Ticks, etc) to/from the Egret
; 6805uC.
;
; Written by: Gary Rensberger
;
; Copyright: © 1990-1993 by Apple Computer, Inc. All rights reserved.
;
; Change History (most recent first):
;
; <SM19> 11/9/93 KW added some eieioSTP macros. Only expands for CygnusX1 ROM.
; <SM18> 9/29/93 SAM From mc900ftjesus.
; <MC3> 9/25/93 SAM Whoot! What a mess. Removed usless/redundant entry points and
; imports/exports by the thousands. Cleaned up tons of stuff.
; Changed the labels of a few routines to reflect the fact that
; they apply to both egret and cuda. Export ChkFirmware for
; vectorization. Backedout change <SM17>.
; <SM17> 9/23/93 PN Add condition for Egret
; <SM16> 7/12/93 kc Re-roll in ShiftRegIRQPatch to fix Quadra 900-950 ReadTime bug.
; <SM15> 12/1/92 RB Turned off the debug feature in Egret.
; <SM14> 11/20/92 GS Removed the CudaPDMPatch from the initialization of the DFAC and
; PDMs for Caboose or Cuda. This initialization for Cyclone is
; now done in the Gibbly.
; <SM13> 11/3/92 SWC Changed ShutdownEqu.a->Shutdown.a.
; <SM12> 10/02/92 AEK Conditionalize call to InitReliabitity to keep it from being
; called twice if not on an overpatched ROM
;
; <SM11> 9/18/92 GS Debug Enter - removed PDMSuspend command. DebugExit - add
; MacsbugContinue command, add Window update. EgretDFACandPDM
; routine - removed the Keybd NMI enable for the Cuda FW. In the
; Cuda FW, the command to enable/disable Keybd NMI no longer is a
; valid command. Keybd NMI is always enabled with the Cuda FW.
; <SM10> 6/26/92 GS (RBM) Removed the Enable KeyboardNMI call made in the
; EgretDFACandPDM
; routine. With the new version of Cuda FW (Cuda 0.22), the NMI
; is always ON.
; No longer has entry in the pseudo cmd table for SetDFACmode.
; Instead, a new
; command exists, called RdWrIIC to perform bidirectional IIC
; transactions.
; This requires special setup of the Cuda globals by the routine
; 'SetTransferParams' (see CudaMgr.a).
;
; <SM9> 5/24/92 RB Removed the routine QuadraEgretChanges since EgretDFACandPDM is
; a better version from the Pandora ROM. This routine gets called
; from StartInit.a
; <SM8> 5/24/92 RB Removing "patches" as they get rolled into the other
; sources...PowerSwitchIntPatch is out.
; <SM7> 5/23/92 RB Making Cyclone changes...Revised some patches rolled in from
; Terror. Pandora comments follow: with some duplications... Note
; that a lot of this code should be reworked with the ADBMgr, the
; first step is to get it all in... **** From EgretPatches.a: <P2>
; 4/24/92 GS Added a Egret Dispatch call to suspend/continue PDM
; when entering exiting Macsbug. This is to prevent problems of
; determining whether or not to ignore PDM messages. **** From
; EgretMgr.a: <P4> 2/10/92 GS Exported the PseudoTable for use by
; the CudaMgr.a code. Cleaned up some comments. <P3> 02/07/92 jmp
; Added some padding so that Pandora matches Horror. <P2> 1/16/92
; GS Added code to determine the Egret Firmware Type (Egret8,
; Caboose, Cuda), then set up the appropiate vectors for IRQ,
; Ticks, Dispatcher...
; ———————————————————————————————————————————————————————————————————————————————————————
; Pre-Pandora ROM comments begin here.
; ———————————————————————————————————————————————————————————————————————————————————————
; <5> 2/20/91 BG Fixed error in CheckPacket. The check for allowable
; pseudo-packets was a hard-coded name check instead of an
; end-of-table check.
; <4> 12/11/90 JJ Mac LC: Changes references to VISAChipBit to V8ChipBit.
; <3> 12/7/90 CCH Adjusted the patch code in CheckPacket so that it fits in the
; same number of bytes as the original code.
; <2> 12/6/90 BG (with GA) Rolled in Eclipse-related Egret/Caboose changes.
; <P9> 4/24/92 GS Removed DSorDebuggerPatch that was called from StartErr.a New
; code and PDM Selectors used by PDM removed the need. Updated
; the DebugUtil code in EgretPatches.a to handle these cases.
; **** From EgretPatchesToo.a:
; <P8> 4/24/92 KW (SWC,H5) Moved ADB and DebugUtil routines to ADBPrimitives.a.
; <P10> 4/10/92 gjs Make Timer Mgr Task fire off a Cuda Tickle pkt every 3 sec
; instead of 7 secs. Still having problem with 2nd User Alert
; with mulitple hits to Keybd Reset key. Also bump up the Timer
; Timeout passed back to Cuda.
; <P9> 4/08/92 gjs Upon installing a TimeMgr task to tickle Cuda during the User
; alert, send a tickle to cover the first 7-10 seconds of the
; display of the alert.
; <P8> 3/30/92 GS The KeyBdSwHandler has been changed to set up a User Alert
; if the KeybdPower switch has been depressed, or if the
; chassis swithc or Secure Key switch has been used for a power down
; a deferred Task will be executed, with out a User Alert.
; <P7> 3/17/92 GS The PowerSwitch Int Handler has been changed to user the new
; ShutDown mgr code in the system. This makes all _ShutDown trap
; calls with the selector set to 1 a soft power off.
; <P6> 3/3/92 GS Update some Cuda Code to save some regs in Tickle timer code,
; and begin to setup for the new power down msg to indicate kybd
; or chassis sw power down.
; <P5> 02/11/92 jmp The EgretDFACandPDAM routine (which used to be the
; EclipseEgretPatches routine) got bigger, so I moved it into the
; pad space, with a branch from the original location.
; <P4> 2/11/92 GS Update the Cuda Patches used to support SoftPower On/Off. Added
; comments and revision tags. Updated a patch label from
; EclipseEgretPatches to EgretDFACandPDM to better describe the
; function of the patch. Also added functionality to the patch to
; handle Caboose and Cuda firmware initializations.
; <P3> 02/07/92 jmp (jmp,H3/BG,Z19) Fixed ReGenSoundInt to wait in between disabling
; and re-enabling sound interrupts. Also changed ReGenSoundInt to
; work like Kip originally intended (i.e. regenerate interrupts
; only on the channel(s) that need it).
; <P2> 1/16/92 GS Rolled in the newPatches that are associated with the Cuda
; firmware for SoftPower On/Off.
; ———————————————————————————————————————————————————————————————————————————————————————
; Pre-Pandora ROM comments begin here. (EgretPatchesToo)
; ———————————————————————————————————————————————————————————————————————————————————————
; <H2> 12/21/91 jmp (BG,Z18) Added code to re-generate sound interrupts when
; checking the keyswitch values since reading port B causes
; interrupts to get cleared (stupid design of original VIAs).
;
; <SM6> 5/17/92 kc Roll in Horror sources. (prepend via equates with v)
; <SM5> 5/13/92 SES Fixed bug in ShiftRegIrq patch roll in. Additional sr restore
; instructions were added only where necessary instead of trying
; to restore "globally" right before exiting.
; <SM4> 5/5/92 SES Rolled in patches from PatchIIciROM.a, including ShiftRegIrq
; patch for saving/restoring sr, and addition of SCC polling in
; EgretDispatch. Also fixed minor bug in tickHandler where
; with/endwith directives were left out.
; <SM3> 5/4/92 FM fix typo
; <SM2> 5/4/92 FM Roll in changes from PatchIICiRom.a file that were "lost" in the
; review process… Changing the TickHandler to update the Time
; lo-mem global so that the RdDateTime can simply return whats in
; the global.
; <21> 1/20/92 KC Move RequestDonePatch into ADBMgr.a. Changed
; CheckForCabooseKeyswitch into TestFor KeyswCabooseBit macro
; call.
; <20> 1/13/92 kc Added Terror changes, origional comments below.
; {?} Added "Enable PDMMessage" and "SendDefault DFAC" to PseudoCntTable.
; {5} 2/20/91 BG Fixed error in CheckPacket. The check for allowable
; pseudo-packets was a hard-coded name check instead of an
; end-of-table check.
; <19> 12/29/91 RB Added Terror changes and rolled in patches to support Quadras.
; <18> 8/30/91 JSM Cleanup header, dont include SysErr.a since its in
; StandardEqu.d.
; <17> 6/12/91 LN removed #include 'HardwareEqu.a'
; <16> 4/24/91 dba fix warning
; <15> 10/22/90 JJ Rex V8: Change VISAChipBit to V8ChipBit.
; <14> 5/15/90 GA Removing calls to SCCPollDelay. Routine not needed.
; <13> 5/8/90 GA Disabled all interrupts during interrupt handler to prevent
; AppleTalk from interrupting Egret Manager and the issuing a
; ReadXPram call which calls Egret Manager Synchronously. Changed
; the Delay100 routine to SCCPollDelay. It polls and buffers any
; serial data from the SCC and calls the Serial Driver PollProc
; routine if one is present. Modified SendEgretCmd to have a retry
; count to communicate with Egret. If the Retry count expires,
; EgretMgr calls Error1Handler. Modified SendPtype to read the
; interrupt flags register in the via 32767 times (≈41.9 millsecs
; max) and then try send the packet type again based on the retry
; count.
; <12> 4/25/90 GA Fixed a bug with SendDFAC to allow 1 to 4 bytes to be sent to
; Egret. Fixed a bug with the error reporting mechanism to return
; all 4 bytes of the error packet returned by Egret.
; <11> 4/10/90 GA Fixed a bug in the error checking code. Made a change to make
; KeyLite program work (returns parameter block byte count
; unchanged).
; <10> 4/2/90 GA Removing the Routine Read LastByte from the SendEgretCmd code.
; Also, fixing lines of source which have had their C/R changed to
; a Null ($00) character. We suspect that Romlister may trash
; source files which are open during the build.
; <9> 3/30/90 GA Added Error reporting for bad parameter blocks from the system
; to Egret.
; <8> 3/22/90 GA Changed the Via_Full Ack process on the last byte of
; transactions to clarify the Logic Analyzer displays.
; <7> 3/15/90 GA Ray and I added conditionalized code to send Stop Autopoll and
; send mode 0 one second interrupt command s in place of the
; SendNOPCmd to support the B3 release of Egret. This code will be
; inactivated when the final Egret parts come in.
; <6> 3/13/90 GA Added a routine called SENDNOPCMD. This routine is register
; driven and issues a command to Egret to Stop AutoPoll and one
; second interrupts in Egret
; <5> 3/9/90 GMR Optimized code in a few places. Moved assertion of SysSes bit to
; after test of XcvrSes, to fix bug on 2 byte tick packets.
; <4> 2/28/90 GMR Rewrote file.
; <3> 2/14/90 GA Added support code for Restart & shutdown in Egret. Issues stop
; autopoll & stop 1 sec interrupts prior to restarting the system.
; <2> 2/9/90 GA 1. Added two calls to DelayLoop to give Egret time to see
; transitions of SysSession signal.
;
; 2. SendWithCheck & SynChkSend now wait for the shift register
; interrupt bit to be asserted before exiting when a transaction
; is aborted.
;
; 3. Moved code which sends bitmap and starts autopoll to Egret into
; EgretMgr.a. ADBMgr now issues a JSR StartEgretAutopoll to do
; the same function. This makes the Erickson overpatch easier.
;
; <1> 2/3/90 GA first checked in
;
************************************************************************
machine mc68020
BLANKS ON
STRING ASIS
PRINT OFF
LOAD 'StandardEqu.d'
INCLUDE 'EgretEqu.a'
INCLUDE 'HardwarePrivateEqu.a'
INCLUDE 'UniversalEqu.a'
INCLUDE 'IOPEqu.a'
INCLUDE 'AppleDeskBusPriv.a'
INCLUDE 'ShutDown.a'
INCLUDE 'FSEqu.a'
INCLUDE 'PowerPrivEqu.a'
PRINT ON
include 'EgretEqu.a'
eject
EgretDebug EQU 0
EgretMgr PROC EXPORT
EXPORT InitEgretOrCuda, EgretDispatch, CheckPacket
EXPORT PseudoCntTable, ADBCntTable, SetResponseParams, ChkFirmware
IMPORT GetHardwareInfo, Error1Handler
IMPORT CudaDispatch,CudaShiftRegIRQ,CudaTickHandler
IMPORT CudaInit, SendCudaCmd
rayFix EQU 1 ; needed to fix Egret bug on old parts
ErrEgretInit equ $0030 ; TEMPORARY definition of error equate defined in STEQU.a
WITH EgretGlobals,EgretPB,RespHeader ; <60> rb
;===============================================================================================
; Routine: InitEgret
;
; Function: Allocates globals, sets vACR to shift in mode, sets up globals for an auto-response
; packet (ADB/Ticks).
;
; Inputs: none
;
; Outputs: none
;
; Destroys: a0-a2, d0-d2
;________________________________________________________________________________________________
InitEgretOrCuda
moveq.l #EgretGlobSize,D0 ; get size of globals
_NewPtr ,SYS,CLEAR ; allocate space on heap and clear
move.l a0,EgretBase ; save ptr to it
movea.l a0,a2 ;
move.w sr,-(sp) ; save irq enable status
ori.w #HiIntMask,sr ; mask out interrupts
lea workPb(a2),a0 ; pointer to work parameter block <SM7> rb
move.l a0,adbPb(a2) ; store in adb parameter block <SM7> rb
bsr SetResponseParams ; setup globals to handle auto response packets again
bsr.l ChkFirmware ; Set up dispatch,IRQ, and ticks (Sets up _EgretDispatch trap)
move.l a0,Lvl1DT+8 ; the level 1 dispatch table
move.l a1,tickComp(a2) ; set up default tick packet handler
movea.l VIA,a1 ; point to the VIA
eieioSTP
bclr.b #SRdir,vACR(a1) ; shift reg direction = input
eieioSTP
move.b #(1<<ifIRQ)|\
(1<<ifSR),vIER(a1) ; enable shift register interrupts
eieioSTP
move.w (sp)+,sr ; restore interrupts
rts
;________________________________________________________________________________________________
; Routine: EgretDispatch
;
; Function: This is the Egret manager trap routine. It waits for Egret to be idle, sends
; the first byte of the command packet. If Egret didn't abort, then it sets up
; globals for the IRQ handler, and if a completion routine was specified, it returns
; back to the caller. If no completion routine, then it waits synchronously for
; the command/response to finish, using the busy bit. When the IRQ handler has finished
; the response packet, it preps the globals to expect an auto-response packet
; (ticks or ADB), clears 'busy' and calls the completion routine (if any).
;
; Inputs: a0 - pointer to parameter block
;
; Outputs: d0 - result (0 for now)
;
; Destroys: a0-a2, d0-d1
;________________________________________________________________________________________________
EgretDispatch
bsr CheckPacket ; Validate the Packet type & command byte
bne @done ; Exit if Error packet
movea.l EgretBase,a2 ; a2 gets ptr to globals
movea.l VIA,a1 ; a1 points to VIA base
@checkSpecial
cmpi.b #specialPkt,pbCmdType(a0) ; is this a special command? <SM7> rb
bne.s @ckPDMInit ; check for Eclipse PowerDown Message Initialization <SM7> rb
move.l a0,ADBpb(a2) ; yes, is to set the ADB param block (for autopoll data). <SM7> rb
bra @done ; <SM7> rb
@ckPDMInit ; <SM7> rb
;
; Check for Eclipse PowerDown Message Vector
; Initialization.
;
cmpi.b #PDMVectPkt,pbCmdType(a0) ; check for PowerDown message vector Init <60> rb <SM7> rb
bne.s @EgretRestart ; Must be Egret Command <60> rb <SM7> rb
move.l pbParam(a0),PDMComp(a2) ; handler for Eclipse PowerDown Message Packet <60> rb <SM7> rb
bra @done ; and exit
@EgretRestart
move.w sr,-(sp) ; save SR
ori.w #hiIntMask,sr ; mask interrupts
eieioSTP
btst.b #xcvrSes,vBufB(a1) ; does Egret want to abort?
eieioSTP
beq.s @abort ; yes, wait for it to go away
bset.b #busy,flags(a2) ; not an abort, mark that we're busy.
eieioSTP
beq.s @sendPackType ; we were not busy before, so try to send the first byte
@abort move.w (sp)+,sr ; we were busy, enable interrupts
bsr pollByte ; poll shift reg, calling handler if interrupts masked
bra.s @EgretRestart ; and keep waiting for busy to go away...
@sendPackType ; interrupts masked here
eieioSTP
bset.b #sysSes,vBufB(a1) ; assert System Session (we're starting command packet)
eieioSTP
bset.b #SRdir,vACR(a1) ; switch to output
eieioSTP
move.b pbCmdType(a0),vSR(a1) ; send command packet to shift reg
eieioSTP
bset.b #viaFull,vBufB(a1) ; tell Egret we sent it
eieioSTP
;<SM4><SES> Rolled in from PatchIIciROM.a
;----------------------------------------------------------------------------------------------------
; This patch fixes possible loss of data to the SCC by calling
; the Poll Proc when SCC data is available.
;
; NOTE: This is a slightly modified version of the one from PatchIIciROM.a
;----------------------------------------------------------------------------------------------------
;_________________________
; If PollProc exists, Poll the SCC and save any available data
; When the shift register irq comes in call the PollProc
; then process the shift register irq data
;
movem.l d0/d1/a0-a4/a6,-(sp) ; save some registers
move.l sp,PollStack ; Pointer to buffer for polled bytes
eieioSTP
btst.b #0,SccIopFlag ; Check if we are in IOP mode (On Eclipse...)
eieioSTP
beq.s @NoPollWait ; If IOP then we don't need to poll
tst.l PollProc ; Check for a Poll Proc available
beq.s @NoPollWait ; If no Poll Proc then we don't need to poll
movea.l SccRd,a3 ; SCC may have data to get
movea.l a3,a6
addq.l #Actl,a3 ; Point to data available register (RR0)
addq.l #AData,a6 ; Point to the SCC data register
@wait
eieioSTP
btst.b #RxCa,(a3) ; Test for SCC data available
eieioSTP
beq.s @2
move.b (a6),-(sp) ; Push the data on the stack
@2
eieioSTP
btst.b #vShift,vIFR(a1) ; now wait for shift reg IRQ
eieioSTP
beq.s @wait
cmpa.l PollStack,SP ; Is there any poll data
beq.s @NoSCCData
;
; We have SCC data and a Poll Proc to call. Go call it
;
pea @NoSCCData ; Return addr for PollProc
move.l PollProc,-(SP) ; Point to the PollProc
rts ; Call the PollProc
@NoPollWait
eieioSTP
btst.b #vShift,vIFR(a1) ; now wait for shift reg IRQ
eieioSTP
beq.s @NoPollWait
@NoSCCData movem.l (sp)+,d0/d1/a0-a4/a6 ; restore work registers
@VsrIrq
eieioSTP
btst.b #xcvrSes,vBufB(a1) ; did Egret abort?
eieioSTP
bne.s @accepted ; no, then it will accept our packet
bclr.b #SRdir,vACR(a1) ; yes, switch back to input
eieioSTP
bclr.b #sysSes,vBufB(a1) ; ack the abort
eieioSTP
bsr CallShiftRegIRQ ; handle it
eieioSTP
bra.s @abort ; and wait
;<SM4><SES> end of EgretDispatch SCC poll fix
@accepted ; we sent the packetType, now set up for the IRQ handler
jsr SetTransferParams ; setup globals for this packet
bsr CallShiftRegIRQ ; transfer second byte (command) to start things
move.w (sp)+,sr ; now enable interrupts
eieioSTP
tst.l pbCompletion(a0) ; do we have a completion routine
eieioSTP
bne.s @done ; yes, then return asynchronously
@waitComplete
btst.b #busy,flags(a2) ; otherwise, are we still busy?
eieioSTP
beq.s @done ; no, then we're done...
bsr.s pollByte ; yes, poll out a byte if necessary
; bclr.b #busy,flags(a2) ; otherwise, are we still busy?
bra.s @waitComplete ; and wait here (synchronously)
@done moveq #0,d0 ; no errors for now
rts
;________________________________________________________________________________________________
;
; Validate the Packet type and Command if Pseudo Pkt.
;
; If an error is encountered with the packet a error packet will be
; built in the pbParam area of the parameter block as if Egret had
; returned the packet. Also, the pbResult field will contain a System
; error code for bad parameter block format.
;
; Entry: A0 = Parameter block pointer
;
; Exit: sr.Z = 0 if valid packet/pseudocmd nonzero otherwise
;
_________________________________________________________________________________________________
CheckPacket
cmp.b #SpecialPkt,pbCmdType(a0) ; could be an ADB initialization packet
beq.s @OkExit
cmp.b #PDMVectPkt,pbCmdType(a0) ; could be PowerDown message Vector Init Packet <60> rb
beq.s @OKExit ; if equal, CONTINUE <60> rb
cmp.b #ErrorPkt,pbCmdType(a0) ; ADB ($00) and Pseudo ($01) only
bhi.s @BadPkt ; Invalid packet
cmp.b #PseudoPkt,pbCmdType(a0) ; Check for pseudo commands
bne.s @OkExit ; On Pseudo Packets check the command
cmp.b #MaxPseudoCmd,pbCmd(a0) ; Validate the Pseudo command number {5}
bls.s @OkExit
@BadPseudo move.w #InvPseudo,pbParam(a0) ; report a pseudo command error
move.w pbCmdType(a0),pbParam+2(a0) ; we are faking an error packet
bra.s @ErrorExit
@BadPkt move.w #InvPkt,pbParam(a0) ; report invalid packet error
move.w pbCmdType(a0),pbParam+2(a0) ; we are faking an error packet
@ErrorExit move.w #paramErr,pbResult(a0) ; parameter error in result field
bra.s @Exit
@OkExit move.w #0,pbResult(a0) ; So far packet OK
@Exit rts
;________________________________________________________________________________________________
; Routine: PollByte
;
; Function: This routine checks to see if level 1 interrupts are masked, exits if not.
; If masked, it polls the flag register for a shift reg interrupt, and
; calls the handler if found.
;
; Inputs: a1 - VIA base ptr
; a2 - globals pointer
;
; Outputs: none
;
; Destroys: d0,d1
;________________________________________________________________________________________________
PollByte
move.w sr,d0 ; get 68xxx interrupt mask
andi.w #hiIntMask,d0 ; are we at interrupt level?
beq.s @exit ; no, just exit
eieioSTP
btst.b #vShift,vIFR(a1) ; yes, poll the shift reg
eieioSTP
beq.s @exit ; no shift reg interrupt, return
bsr.s CallShiftRegIRQ ; yes, handle it
@exit rts
;________________________________________________________________________________________________
; Routine: SendByte
;
; Function: This routine clears viaFull bit, delays 125us, sends a byte to the shift reg,
; then asserts viaFull bit.
;
; Inputs: d0 - byte to send
; a1 - VIA base ptr
;
; Outputs: none
;
; Destroys: d1
;________________________________________________________________________________________________
SendByte
eieioSTP
bclr.b #viaFull,vBufB(a1) ; negate via full
eieioSTP
bsr.s Delay100 ; give Egret time to see it
eieioSTP
move.b d0,vSR(a1) ; send the byte to the shift reg
eieioSTP
bset.b #viaFull,vBufB(a1) ; let Egret know it's there
eieioSTP
rts
;________________________________________________________________________________________________
CallShiftRegIRQ
movem.l a0-a3/d0-d3,-(sp) ; save regs like interrupt handler does
movea.l Lvl1DT+8,a0 ; get the shift reg IRQ handler
jsr (a0) ; call it
movem.l (sp)+,a0-a3/d0-d3 ; restore regs
rts
;________________________________________________________________________________________________
viaFullAck
eieioSTP
bset.b #viaFull,vBufB(a1) ; acknowlege the byte
eieioSTP
bsr.s Delay100 ; give Egret time to see it
eieioSTP
rts ; gets cleared on exit from IRQ handler
;________________________________________________________________________________________________
Delay100
move.l d1,-(sp) ; save d1
move.w timeViaDB,d1 ; 1 ms loop count
lsr.w #3,d1 ; / 8 = 125 us
; cmpi.b #boxQuadra900,boxFlag ; is this a Quadra900 ? <60> rb
; bne.s @loop ; no ? then skip <60> rb
add.w #EclipseDelay,d1 ; <60> rb, we need an extra 25 usecs on Eclipse <GAA Eclipse>
@loop
eieioSTP
tst.b (a1) ; access the VIA
eieioSTP
dbra d1,@loop
move.l (sp)+,d1 ; restore d1
eieioSTP
rts
;________________________________________________________________________________________________
; Routine: ShiftRegIRQ
;
; Function: This routine is called in response to a VIA shift reg interrupt. It will transfer
; the next byte in the current packet. When the packet is complete, the globals are
; prepped for an auto-response packet (ADB/Ticks), then the completion routine
; is called (if present).
;
; Inputs: a1 - VIA base ptr
;
; Outputs: a2 - globals pointer
;
; Destroys: a0-a2,d0,d1
;________________________________________________________________________________________________
EXPORT ShiftRegIRQ
ShiftRegIRQ
move.w sr,d3
ori.w #hiIntMask,sr ; mask interrupts <13>
movea.l EgretBase,a2 ; get ptr to globals <13>
bset.b #busy,flags(a2) ; make sure we're marked as busy
eieioSTP
btst.b #SRdir,vACR(a1) ; see if VIA direction is output
eieioSTP
beq.s @input ; no, then we're receiving..
tst.b vSR(a1) ; clear the shift reg interrupt
eieioSTP
tst.w sendHdrCnt(a2) ; any bytes left in header?
ble.s @ckSendData ; no, see if any send bytes left...
movea.l sendHdrPtr(a2),a0 ; get ptr to header
move.b (a0)+,d0 ; get next header byte
move.l a0,sendHdrPtr(a2) ; and update header ptr
bsr SendByte ; send the byte
subq.w #1,sendHdrCnt(a2) ; count it
move.w d3,sr ; restore interrupts <SM5><SES>
bra @exit ; and exit
@ckSendData
tst.w sendDataCnt(a2) ; any bytes left in data to send
ble.s @CmdFinished ; no, then we're finished with command packet
movea.l sendDataPtr(a2),a0 ; get current data ptr
move.b (a0)+,d0 ; yes, get next data byte
move.l a0,sendDataPtr(a2) ; and update the ptr
bsr SendByte ; send it
subq.w #1,sendDataCnt(a2) ; count it
move.w d3,sr ; restore interrupts <SM5><SES>
bra @exit ; and exit
@CmdFinished
eieioSTP
bclr.b #SRdir,vACR(a1) ; now switch to input
@sendCmd
eieioSTP
andi.b #~((1<<viaFull) | \ ; negate VIA full bit
(1<<sysSes)),vBufB(a1) ; negate System Session
eieioSTP
bsr.s Delay100 ; give Egret time to see System Session
move.w d3,sr ; restore interrupts <SM5><SES>
bra @exit ; and exit
@input ;-----------------------------------------------------------------------------
eieioSTP
move.b vSR(a1),d0 ; read the byte from shift reg into D0
eieioSTP
tst.w rcvHdrCnt(a2) ; any bytes left in response packet header?
ble.s @ckRcvData ; if not then must be data byte
@getHdrByte
eieioSTP
btst.b #sysSes,vBufB(a1) ; is System Session asserted?
eieioSTP
bne.s @notFirst ; yes, then this is not the first byte
bsr.s Delay100 ; delay 100us
bra.s @stuff
@notFirst
bsr.s viaFullAck ; acknowlege the byte using via full
@stuff move.w rcvHdrIndex(a2),d1 ; get index into header
lea rcvHeader(a2),a0 ; point to header buffer
move.b d0,(a0,d1.w) ; store byte away
addq.w #1,rcvHdrIndex(a2) ; bump to next byte
subq.w #1,rcvHdrCnt(a2) ; count it
ble.s @CheckError ; <12>
eieioSTP
btst.b #xcvrSes,vBufB(a1) ; is Egret done?
eieioSTP
bne.s @done ; yes, we're through...
bset.b #sysSes,vBufB(a1) ; make sure System Session is asserted <5>
eieioSTP
bra @exitRd ; not done with header yet... exit
@ckRcvData
movea.l rcvDataPtr(a2),a0 ; get ptr to receive data buffer
move.b d0,(a0)+ ; store the data byte
move.l a0,rcvDataPtr(a2) ; and update header ptr
subq.w #1,rcvDataCnt(a2) ; count it
bgt.s @ack ; not last, normal acknowlege
btst.b #openData,flags(a2) ; is this an open ended data packet?
eieioSTP
beq.s @ack ; no, normal acknowlege
bsr.s viaFullAck ; acknowlege the byte using via full <8>
eieioSTP
bclr.b #sysSes,vBufB(a1) ; yes, let Egret know we don't want more <8>
@wait
eieioSTP
btst.b #xcvrSes,vBufB(a1) ; wait for egret to acknowledge termination <8>
eieioSTP
beq.s @wait ; branch until xcvr session goes high <8>
bra.s @done ; and we're done
;
; If we have an error packet in progres then read 5 bytes instead of 4 for the header. <12>
; A flag will be set on the fourth byte of an error packet and will be cleared <12>
; after reading the fifth byte of the error packet. <12>
@CheckError lea rcvHeader(a2),a0 ; point to header buffer <12>
cmp.b #ErrorPkt,1(a0) ; check packet type for error packet <12>
bne.s @CheckDone ; not an error packet go check for data <12>
bclr.b #BadPkt,flags(a2) ; check for error packet in progress flag <12>
bne.s @CheckDone ; we read the fifth byte of the error packet <12>
@readbyte5 addq.w #1,rcvHdrCnt(a2) ; adjust the count before reading the fifth byte <12>
bset.b #BadPkt,flags(a2) ; set the flag then read the fifth byte <12>
bra @exitRd ; <12>
;
; Acknowledge the data byte
;
@ack bsr.s viaFullAck ; normal byte, acknowlege it
@checkDone
eieioSTP
btst.b #xcvrSes,vBufB(a1) ; was that Egrets last byte?
eieioSTP
bne.s @done ; yes, we're through...
tst.w rcvDataCnt(a2) ; any receive data bytes to get?
bgt @exitRd ; yes, then just exit
;---------------------------------------------------------------------------
@done
eieioSTP
bclr.b #viaFull,vBufB(a1) ; make sure via full is low
eieioSTP
bclr.b #sysSes,vBufB(a1) ; let Egret know we're done
eieioSTP
bsr delay100 ; Give Egret time to see transitions & Poll SCC <13>
movea.l curPb(a2),a0 ; a0 points to current param block
lea rcvHeader(a2),a1 ; a1 points to header buffer <11>
cmp.b #ErrorPkt,1(a1) ; check for Error response packet <11>
eieioSTP
bne.s @NotError
;
; The current transaction generated an Error <11>
;
move.l 1(a1),pbParam(a0) ; Return the Error Response packet to the caller (dont include attn byte) <11>
move.w #paramErr,pbResult(a0) ; and return a parameter block error <11>
@NotError cmpa.l adbPb(a2),a0 ; was this an implicit command?
beq.s @implicit ; yes, handle autopoll/tick packet
tst.b 1(a1) ; is this an ADB response?
bne.s @ckComp ; no, then data already transfered, call completion
@adbResp
IF rayFix THEN
cmpa.l adbPb(a2),a0 ; is this autopoll data
bne.s @skip ; no, don't fix ray's flag
bset.b #EgAutoPoll,2(a1) ; yes, fix em
eieioSTP
@skip
ENDIF
btst.b #EgAutoPoll,2(a1) ; check status, is this AutoPoll data?
eieioSTP
bne @ckAutoPollComp ; yes, handle if we have completion routine
move.b 2(a1),pbFlags(a0) ; explicit ADB command, stuff flags byte
move.w rcvHdrIndex(a2),d0 ; get header+data byte count
subq.w #4,d0 ; - header bytes
beq.s @dontupdate ; if no data received don't update the byte count <11>
move.w d0,pbByteCnt(a0) ; stuff data byte count
@dontupdate move.l pbBufPtr(a0),a2 ; get users buffer ptr
addq.w #4,a1 ; point at the data
bra.s @cnt
@xfer move.b (a1)+,(a2)+ ; copy the byte
eieioSTP
@cnt dbra d0,@xfer ; repeat for all bytes
move.l EgretBase,a2 ; get globals ptr again
@ckComp move.l pbCompletion(a0),d0 ; any completion routine?
beq @exitNoComp ; no, just exit
move.l d0,a1 ; yes, get it's address
move.l a0,-(sp) ; save param block ptr
bsr SetResponseParams ; setup globals to handle auto response packets again
move.w d3,sr ; restore interrupts
move.l (sp)+,a0 ; restore param block ptr
jmp (a1) ; and call it
;--------------------------------------------------------------------------------------------
; AutoPoll or Tick data, push it on stack and call completion rtn
@implicit
tst.b RespPktType(a1) ; is this an ADB response? <SM16>.start
beq.s @ckAutoPollComp ; yes, handle it
cmpi.b #tickPkt,RespPktType(a1) ; is this a short tick response?
beq.s @ckTickComp ; yes, handle it (has no param block)
cmpi.b #PDMPkt,RespPktType(a1) ; is this a PowerDown Message Packet?
beq.s @ckPowerDownComp ; yes, handle it
cmpi.b #pseudoPkt,RespPktType(a1) ; is this a pseudo command?
bne.s @InvalidPacket ; no, something is wrong
cmpi.b #RdTime,RespCmd(a1) ; is this a read time response?
beq.s @ckTickComp ; yes, handle it
@InvalidPacket
IF EgretDebug THEN ; We have an invalid packet
pea @InvPktStr ; call Macsbug
_DebugStr
bra.s @exitNoComp ; exit without completion
@InvPktStr dc.b $14,'INVALID EGRET Packet' ; Egret error string
align
Else
bra.s @exitNoComp ; exit without completion
Endif
@ckPowerDownComp
; call service routine if it exists. <SM16>.end
move.l PDMComp(a2),d2 ; get the completion routine address
beq.s @exitNoComp ; go away if vector is null
move.l d2,a3 ; call the Service routine
move.b RespCmd(a1),d0 ; get the powerDown Switch destination position
bsr.l SetResponseParams ; setup globals to handle auto response packets again
move.w d3,sr ; restore interrupts
jsr (a3)
bra.s @exit
@ckTickComp ; tick data, check for completion routine
move.l tickComp(a2),d2 ; get completion routine in d2
beq.s @exitNoComp ; none specified, just exit
bra.s @push ; otherwise, push response packet on stack, call it.
@ckAutoPollComp ; ADB autopoll data, check for completion rtn
IF rayFix THEN
bset.b #EgAutoPoll,2(a1) ; Set AutoPoll bit to fix bug in old Egret parts
ENDIF
tst.l a0 ; do we really have a current param block? (we should)
beq.s @exitNoComp ; no, exit
move.l pbCompletion(a0),d2 ; any completion routine? (keep in d2)
beq.s @exitNoComp ; no, just exit
@push suba.w #12,sp ; allocate 12 byte buffer on stack
movea.l sp,a2 ; point to the buffer
move.l (a1)+,(a2)+ ; copy response header onto stack
move.l (a1)+,(a2)+ ; copy response data onto stack
move.l (a1)+,(a2)+ ; copy response data onto stack
movea.l EgretBase,a2 ; restore ptr to globals
move.w rcvHdrIndex(a2),d0 ; d0 = # bytes in response header
subq.w #4,d0 ; byte count = # data bytes (strip off header bytes)
bsr SetResponseParams ; setup globals to handle auto response packets again
move.w d3,sr ; restore interrupts
move.l sp,a1 ; a1 = ptr to response packet
addq.l #2,a1 ; a1 = ptr to status flag
move.l d2,a3 ; get completion routine
jsr (a3) ; call it (a0 points to param block for ADB)
adda.w #12,sp ; pop buffer
bra.s @exit ; and exit
@exitNoComp ; no completion routine specified,
bsr SetResponseParams ; setup globals to handle auto response packets again
move.w d3,sr ; restore interrupts
bra.s @exit ; and exit
@exitRd
eieioSTP
bclr.b #viaFull,vBufB(a1) ; make sure via full is low
eieioSTP
move.w d3,sr ; restore interrupts <SM5><SES>
@exit rts
;________________________________________________________________________________________________
; Routine: SetTransferParams
;
; Function: This routine sets up transmit/receive ptrs (globals) for the packet pointed to by A0,
; for use by the Shift Reg interrupt handler.
;
; Inputs: a0 - Param block pointer
; a2 - Ptr to globals
;
; Outputs: none
; Destroys: d0,d1
;________________________________________________________________________________________________
SetTransferParams
move.l a1,-(sp) ; save a1
lea pbCmd(a0),a1
move.l a1,sendHdrPtr(a2) ; point to 1st byte of header to send
eieioSTP
moveq #0,d0
move.b pbCmd(a0),d0 ; get command
tst.b pbCmdType(a0) ; is this an ADB command?
bne.s @pseudo ; no, must be a pseudo command
andi.b #%00001111,d0 ; keep low 4 bits
lea ADBCntTable,a1 ; get ptr to our ADB command table
bra.s @check ; and look up our send/rcv byte counts
;
; Pseudo Command. Now Check for SEND DFAC and treat as special case if it is. <12>
; On DFAC, use the byte count in the parameter block as the count to send <12>
; to Egret instead the count contained in the PseudoCntTable. <12>
;
@pseudo
cmp.b #WrDFAC,pbCmd(a0) ; check for DFAC <12>
bne.s @notDFAC ; use the table if not DFAC <12>
move.w pbByteCnt(a0),d1 ; was Write DFAC use the byte count in the pBlock <12>
addq.w #1,d1 ; include the packet byte already sent <12>
move.w d1,sendHdrCnt(a2) ; set up header byte count <12>
eieioSTP
move.w #0,sendDataCnt(a2) ; do not send the bytes as data also <12>
eieioSTP
clr.w sendDataCnt(a2) ; no extended data bytes <12>
eieioSTP
clr.l sendDataPtr(a2) ; no extended data ptr <12>
eieioSTP
bra.s @rcvParams
@notDFAC lea PseudoCntTable,a1 ; get ptr to our pseudo command table
@check lsl.w #1,d0 ; x 2 for word table
move.w (a1,d0.w),d1 ; get send/rcv byte counts for this command
ror.w #8,d1 ; get send byte count in low byte
tst.b d1 ; is this an open-ended send command?
bmi.s @sendExt ; yes, branch...
move.b d1,d0 ; get byte count from table
ext.w d0 ; extend to word
addq.b #1,d0 ; data bytes + 1 = header byte count
move.w d0,sendHdrCnt(a2) ; set up header byte count
eieioSTP
clr.w sendDataCnt(a2) ; no extended data bytes
eieioSTP
clr.l sendDataPtr(a2) ; no extended data ptr
eieioSTP
bra.s @rcvParams ; now setup receive ptrs
@sendExt moveq #$7F,d0 ; prepare to mask sign
and.w d1,d0 ; get rid of sign
addq.w #1,d0 ; + 1 for command (packet type already sent)
move.w d0,sendHdrCnt(a2) ; set up header byte count
eieioSTP
move.w pbByteCnt(a0),sendDataCnt(a2) ; set up data byte count
eieioSTP
move.l pbBufPtr(a0),sendDataPtr(a2) ; set up send data ptr
eieioSTP
@rcvParams clr.w rcvHdrIndex(a2) ; reset index into header buffer
eieioSTP
move.w #4,rcvHdrCnt(a2) ; 4 byte header default
eieioSTP
asr.w #8,d1 ; get receive data byte count
bmi.s @rcvExt ; branch for open-ended reads
tst.b pbCmdType(a0) ; reading, is this a pseudo command?
beq.s @rcvADB ; no, must be adb data
lea pbParam(a0),a1 ; pseudo data will be received in pbParam
eieioSTP
move.l a1,rcvDataPtr(a2)
eieioSTP
move.w d1,rcvDataCnt(a2) ; get receive count from table
eieioSTP
bra.s @exit ; and exit
@rcvADB add.w d1,rcvHdrCnt(a2) ; total header bytes = 4 + ADB data
eieioSTP
clr.w rcvDataCnt(a2) ; not used
eieioSTP
bclr.b #openData,flags(a2) ; this is not an open ended data packet (readPram, read6805)
bra.s @exit
@rcvExt move.w pbByteCnt(a0),rcvDataCnt(a2) ; set up received data byte count
eieioSTP
move.l pbBufPtr(a0),rcvDataPtr(a2) ; set up received data buffer ptr
eieioSTP
bset.b #openData,flags(a2) ; this is an open ended data packet (readPram, read6805)
@exit move.l a0,curPb(a2) ; set up current param block
eieioSTP
movea.l (sp)+,a1 ; restore a1
rts
;________________________________________________________________________________________________
; Routine: SetResponseParams
;
; Function: This routine sets up transmit/receive ptrs (globals) for an auto response packet
; (e.g. ticks, ADB autopoll data), for use by the Shift Reg interrupt handler.
;
; Inputs: a2 - Ptr to globals
;
; Outputs: none
;
; Destroys: none
;________________________________________________________________________________________________
SetResponseParams
clr.l sendHdrPtr(a2) ; no command packet params
clr.w sendHdrCnt(a2) ;
clr.w sendDataCnt(a2) ;
clr.l sendDataPtr(a2) ;
move.w #12,rcvHdrCnt(a2) ; receive up to 12 response header bytes
clr.w rcvHdrIndex(a2) ; reset response header index
clr.w rcvDataCnt(a2) ; no extended data bytes
clr.l rcvDataPtr(a2) ; no receive data buffer
move.l adbPb(a2),curPb(a2) ; point to adb's autopoll param block
andi.b #~((1<<busy)|\ ; we're not busy now
(1<<openData)),flags(a2) ; we're not expecting an open ended data packet
rts
; <SM4><SES> put back function banner
;________________________________________________________________________________________________
; Routine: tickHandler
;
; Function: This is the completion routine for tick response packets.
;
; Inputs: a2 - ptr to globals
; (sp) - points to response packet
;
; Outputs: none
;
; Destroys: ???
;________________________________________________________________________________________________
; <SM22> FM This patch was rolled in from the PatchIIciRom.a file.
; <SM22> FM Its purpose is to keep the tim lo-mem up to date at
; <SM22> FM interrupt time so that the RdDateTime trap can simply
; <SM22> FM read the Time lo-mem global.
;----------------------------------------------------------------------------------------------------
; This patch fixes a bug in Egret Manager TickHandler routine. <89><101>
; The routine will store the 32 bit time passed by Egret to the
; system if the packet is a ReadRealTime into TIME lowmen.
; Decrements the lowmem Time by one to compensate for the interrupt
; Handler incrementing it by one and then calls the LVL1DT interrupt
; handler.
; If the packet is a tick packet then it calls LVL1DT to increment the
; time setting and check the alarm state.
;
; Entry:
; A1.l = Points at Response data buffer At Flags byte:
;
; +---------+----------+---------+---------+---------//-------+
; | Attn | Pkt Type | Flags | Pkt Cmd | 8 Bytes data Max |
; +---------+----------+---------+---------+---------//-------+
;
; A2.l = Points at Egret Manager Globals
;
;----------------------------------------------------------------------------------------------------
EXPORT TickHandler
TickHandler
WITH respPacket,EgretGlobals ; <SM4><SES>
subq.l #2,a1 ; <SM22> FM point to the beginning of the Response data buffer
cmpi.b #TickPkt,respPacket.respType(a1) ; <SM22> FM Check the Packet type
beq.s @CallLVL1DT ; <SM22> FM If tick packet just call LVL1DT handler
;
; The packet was a readTime packet from Egret. Update the Time lowmem and
; adjust it to compensate for the increment in the LVL1DT handler.
;
move.l respPacket.respData(a1),Time ; <SM22> FM write the new time in lowmem TIME
subq.l #1,Time ; <SM22> FM adjust to compensate for increment in LVL1DT
;
; JUMP to routine pointed to by the Contents of LVL1DT
;
@CallLVL1DT
move.l VIA,a1 ; point to the VIA
move.l LVL1DT,a0 ; get vector
jmp (a0)
ENDWITH ; <SM4><SES>
;________________________________________________________________________________________________
; These tables contain the transmit byte count and receive byte counts for each Egret command,
; one table for pseudo commands, and one table for ADB commands.
;
; tx byte cnt
; ____________
; bit 7 = 1 means pbByteCnt = number of data bytes to send after header
; bit 6-0 = # of pbParam bytes to send (in header)
;
; rx byte cnt
; ____________
; bit 7 = 1 means open ended read call (e.g. read6805, readPram)
; bit 6-0 = Pseudo Cmds: # of pbParam bytes to read into (after 4 byte header)
; bit 6-0 = ADB Cmds: # of data bytes to read into pbBufPtr
;________________________________________________________________________________________________
PseudoCntTable
dc.b $00, $00 ; 00 NoOperation send 0 bytes, receive 0 data bytes
dc.b $01, $00 ; 01 StartStopAutopoll send 1 byte, receive 0 data bytes
dc.b $02, $FF ; 02 Read6805 send 2 bytes, receive n data bytes
dc.b $00, $04 ; 03 ReadClock send 0 bytes, receive n data bytes
dc.b $00, $02 ; 04 GetRomSize send 0 bytes, receive 2 data bytes
dc.b $00, $02 ; 05 GetRomBase send 0 bytes, receive 2 data bytes
dc.b $00, $02 ; 06 GetRomHeader send 0 bytes, receive 2 data bytes
dc.b $02, $FF ; 07 ReadPRAM send 2 bytes, receive n data bytes
dc.b $82, $00 ; 08 Write6805 send 2+n bytes, receive 0 data bytes
dc.b $04, $00 ; 09 SetClock send 4 bytes, receive 0 data bytes
dc.b $00, $00 ; 0A PowerDown send 0 bytes, receive 0 data bytes
dc.b $04, $00 ; 0B SetPowerUp send 4 bytes, receive 0 data bytes
dc.b $82, $00 ; 0C WritePRAM send 2+n bytes, receive 0 data bytes
dc.b $01, $00 ; 0D SetResetFlag send 1 bytes, receive 0 data bytes
dc.b $01, $00 ; 0E SendDFAC send 1 bytes, receive 0 data bytes
dc.b $00, $02 ; 0F RunDiags send 0 bytes, receive 2 data bytes
dc.b $00, $01 ; 10 CtrlEnabSense send 0 bytes, receive 1 data bytes
; 10 BatterySense send 0 bytes, receive 1 data bytes
dc.b $00, $00 ; 11 Restart send 0 bytes, receive 0 data bytes
dc.b $01, $00 ; 12 SetVpp send 1 bytes, receive 0 data bytes
; 12 SetIPL send 1 bytes, receive 0 data bytes
dc.b $01, $00 ; 13 SetFileServer send 1 bytes, receive 0 data bytes
dc.b $01, $00 ; 14 SetAutoPoll send 1 bytes, receive 0 data bytes
dc.b $00, $02 ; 15 GetPramSize send 0 bytes, receive 2 data bytes
dc.b $00, $01 ; 16 GetAutoPollRate send 0 bytes, receive 1 data bytes
dc.b $01, $00 ; 17 SetBusDelay send 1 bytes, receive 0 data bytes
dc.b $00, $01 ; 18 GetBusDelay send 0 bytes, receive 1 data bytes
dc.b $02, $00 ; 19 SetDevList send 2 bytes, receive 0 data bytes
dc.b $00, $02 ; 1A GetDevList send 0 bytes, receive 2 data bytes
dc.b $01, $00 ; 1B SetOneSecMode send 1 bytes, receive 0 data bytes
dc.b $01, $00 ; 1C SetKbdNMI send 1 bytes, receive 0 data bytes
dc.b $01, $00 ; 1D SetPostParse send 1 bytes, receive 0 data bytes
dc.b $01, $00 ; 1E SetHangTime send 1 bytes, receive 0 data bytes
dc.b $00, $01 ; 1F GetHangTime send 0 bytes, receive 1 data bytes
dc.b $80, $00 ; 20 SendDefault DFAC send 0-4 bytes, receive 0 data bytes {?} rb
dc.b $01, $00 ; 21 Enable PDMMessage send 1 bytes, receive 0 data bytes {?} rb
dc.b $00, $00 ; 22 RdWrIIC send n bytes, receive n data bytes <S2> [rbm]
dc.b $01, $00 ; 23 Set WakeUpMode send 1 bytes, receive 0 data bytes <T2><SM7> rb
dc.b $01, $00 ; 24 Tickle PDM Timer send 1 bytes, receive 0 data bytes <T2><SM7> rb
ADBCntTable
dc.b $00, $00 ; 0000 SendReset send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0001 Flush send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0010 send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0011 send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0100 send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0101 send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0110 send 0 bytes, receive 0 data bytes
dc.b $00, $00 ; 0111 send 0 bytes, receive 0 data bytes
dc.b $80, $00 ; 10xx Listen send n bytes, receive 0 data bytes
dc.b $80, $00 ; 10xx Listen send n bytes, receive 0 data bytes
dc.b $80, $00 ; 10xx Listen send n bytes, receive 0 data bytes
dc.b $80, $00 ; 10xx Listen send n bytes, receive 0 data bytes
dc.b $00, $08 ; 11xx Talk send 0 bytes, receive 8 data bytes max
dc.b $00, $08 ; 11xx Talk send 0 bytes, receive 8 data bytes max
dc.b $00, $08 ; 11xx Talk send 0 bytes, receive 8 data bytes max
dc.b $00, $08 ; 11xx Talk send 0 bytes, receive 8 data bytes max
EndWith
Eject
;=========================================================================
; Routines: EgretInit
;
; This routine sends a NOP/WarmStart command to Egret. This routine is
; called early during rom Startup to stop autopoll and 1 sec irq. Also,
; the routine will issue a Send DFAC command to Egret to initialize the
; the DFAC hardware to a known state. The routine does not use ANY
; memory it is register driven only.
;
; NOTE: This routine actually sends a STOP AUTO POLL, SET ONE SECOND
; INTERRUPT MODE 0 call and a SEND DFAC command to Egret.
; The Stop Autopoll and set one second interrupt modes calls will
; be changed to a single NOP/WarmStart when Egret 3 becomes
; available (S/B 4/6/90).
;
; Inputs: NONE
;
; Outputs: NONE
;
; Destroys: D0, D1, D2, D3, A1, A5, A6, A4 (Egret 2 implementation)
; Destroys: D0, D3, A1, A5, A6 (Egret 3 implementation)
;
; NOTE: This routine is called via a BSR6 and returns via a RTS6
;-------------------------------------------------------------------------
EXPORT EgretInit
EgretInit movea.l DecoderInfo.VIA1Addr(a0),a1 ; get VIA 1 base address
eieioSTP
bclr.b #vSyssesbit,vBufB(a1) ; kill any pending transactions <8> <13>
eieioSTP
bclr.b #vViafullbit,vBufB(a1) ; <8> <13>
eieioSTP
moveq #$28,d0 ; we want to delay 4 millisecs
@killtime bsr5 delay100us ; in 100 usec increments
dbra d0,@killtime
move.l a6,a4 ; save the return address
if rayFix then
;
; Send the Stop autopoll pseudo command
;
move.l #(APoll << 16) + PseudoPkt,d0 ; first command to send is Stop Auto Poll
moveq #0,d1 ; sending one byte of data $00 = stop autopoll
moveq #1,d2
bsr6 SendEgretCmd ; send the command to Egret
tst.w d0 ; check for an error
bne.s @exit ; failed to send the command (hang timeout expired)
;
; Send the mode 0 1 second interrupt pseudo command
;
move.l #(Wr1SecMode << 16) + PseudoPkt,d0 ; mode 0 1 sec interrupts (stop 1 second irq)
moveq #0,d1 ; sending one byte of data
moveq #1,d2
bsr6 SendEgretCmd ; send the command to Egret
tst.w d0 ; negative if error
bne.s @exit ; failed to send the command (hang timeout expired)
else
;
; Send the NOP/WarmStart command
;
move.w #NopCmd,d0 ; Nop/WarmStart stops autopoll and 1 sec irq
swap d0 ; packet type Pseudo
move.w #pseudopkt,d0
moveq #0,d2 ; no data to send
bsr6 SendEgretCmd ; send the command to Egret
tst.w d0 ; nonzero if error
bne.s @exit ; failed to send the command (hang timeout expired)
endif
;
; Send Elsie/Erickson initial DFAC setting
;
with ProductInfo
moveq #0,d2 ; force full scan of hardware features <10>
bsr6 GetHardwareInfo ; get the ProductInfo Record <9>
btst.b #v8chipbit,ExtValid+3(a1) ; See if system has a VISA chip (bit7)<9><10>
beq.s @Erickson ; 0 = No Visa (Erickson) 1 = Visa (Elsie) <9>
move.l #ElsieDFAC,d1 ; Assume running on Erickson (Not Elsie) <9>
bra.s @sendit
@Erickson move.l #EricksonDFAC,d1 ; Erickson DFAC setting <9>
@sendit move.l #(WrDFAC << 16) + PseudoPkt,d0 ; Send DFAC command
moveq #1,d2 ; One byte to send
bsr6 SendEgretCmd ; send the command to Egret
tst.w d0 ; negative if error
@exit move.l a4,a6 ; restore return address
rts6 ; return to the caller
endwith
eject
************************************************************************************************************
* SendEgretCmd: This register based routine will send up to four bytes of data to Egret. The
* packet type, command, byte count and data are passed in registers. The routine
* will return with d0.w = $0000 if it sent the command successfully. A value of
* $FFFF signifies that the command did not get through. The system and Egret hung
* and the system aborted the transaction.
*
* WARNING: This routine will not error check the transaction requested. It is the responsibility of
* WARNING: the caller to make sure that the packet type, command, data and data byte count are valid
* WARNING: for the transaction requested. Failure to follow the rules will make this routine fail and
* WARNING: CRASH the system.
*
* Input:
* a0.l Pointer to Base address table
*
* d0.l = High word PACKET Command
* Low word PACKET Type
*
* d1.l = Up to four bytes of data to send
* Long word data byte assigment = byte 4, byte 3, byte 2, byte 1
* Byte 1 sent out first
*
* d2.l = Byte count to send. (0-4 bytes)
* Byte count > 4 will send four bytes only
*
* Output: d0.w $0000 if call succeeded, Nonzero if failed
*
* d1.l high word = flags, low word packet type returned by Egret
*
* Destroys: D2.l, D3.l, D4.l, A5.l, A4.l, A1.l
*
************************************************************************************************************
Export SendEgretCmd
SendEgretCmd
movea.l DecoderInfo.VIA1Addr(a0),a1 ; get VIA 1 base address <P2> <SM7> rb, start
move.l #((MaxTout<<16) OR MaxRetries),d4 ; number of retries before giving up with Egret <13>
bsr5 Delay100us
eieioSTP
btst.b #vsysSesBit,vBufB(a1) ; check for a transaction in progress
eieioSTP
beq.s @AllOK
@Timeout
eieioSTP
bclr.b #vsysSesBit,vBufB(a1) ; kill the rest of the transaction <8>
eieioSTP
bclr.b #vViaFullBit,vBufB(a1) ; <8>
eieioSTP
bsr5 Delay100us ; in progretss <8>
bsr5 Delay100us ; <8>
@AllOK swap.w d4 ; timeout in low word of d4 Retry count in high word <13>
eieioSTP
btst.b #vxcvrSesBit,vBufB(a1) ; check for abort pending
eieioSTP
beq IrqMissed ; MIssed Vsr Irq because of INITVIAS
bset #vsysSesBit,vBufB(a1) ; assert sysSesBit
eieioSTP
bsr5 @SendPtype ; send the packet type
beq RealAbort ; Discard Aborting transaction <SM7> rb, end
;
; If not abort transaction in progress then send the command byte
;
swap d0
bsr5 sendByte1 ; send the command byte
bsr5 delay100us ; give Egret time to see viaEmpty
;
; Now send number of bytes contained in d1 based on
; byte count contained in d2.w
;
move.l d1,d0 ; get the data to send
subq #1,d2 ; adjust for DBRA
cmp.w #3,d2 ; if count out of range quit
bhi.s @EndCmd ; if count valid then adjust for dbra
@sendloop bsr5 sendByte1
bsr5 delay100us
lsr.l #8,d0 ; move data byte to low byte of register
@loopEntry dbra d2,@sendloop ; decrement byte count
;
; Wait for the response packet header
;
@EndCmd
eieioSTP
bclr.b #SRdir,vACR(a1) ; shift in
eieioSTP
bclr.b #vSyssesbit,vBufB(a1) ; negate vSyssesbit
eieioSTP
bsr5 Delay100us
;
; Now receive the Standard Response packet Header
;
bsr5 readAttn ; get the Attention byte
eieioSTP
bsr5 Delay100us
eieioSTP
bset.b #vSyssesbit,vBufB(a1) ; assert vSyssesbit
eieioSTP
bsr5 readByte ; get the packet type
and #$00FF,d0 ; keep low byte only
swap d0 ; save the packet type
bsr5 readByte ; get the flags byte
and.w #$00FF,d0 ; keep low byte only
swap d0 ; keep the flags byte as an error code
exg d0,d1 ; save the packet type and flags returned
bsr5 readByte ; get the command
eieioSTP
bclr.b #vSyssesbit,vBufB(a1) ; negate vSyssesbit
eieioSTP
bsr5 Delay100us
;
; Check for an error packet returned by Egret
;
move.l d1,d0 ; save the packet type and flags
cmp.b #errorpkt,d0 ; check for error packet
beq.s @Exit ; error pkt then just exit
sub.w d0,d0 ; zero for success
@exit rts6
;--------------------------------------------------------------------------
@SendPtype ; <2>
eieioSTP
bset.b #SRdir,vACR(a1) ; shift out
eieioSTP
btst.b #vXcvrsesbit,vbufB(a1) ; check for abort
eieioSTP
beq.s @AbortReq ; go away if abort requested
move.b d0,vSR(a1) ; load byte into shift reg
eieioSTP
bset.b #vViafullbit,vBufB(a1) ; indicate shift reg is full
eieioSTP
;
; Check Vsr Irq until timeout. If timeout then check the retry count
; and Call Death Chimes if Retry count exausted.
;
@PollDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
bne.s @VsrIrq ; Go service Shift register Irq <13>
dbra.w d4,@PollDelay ; try again if timed out <13><SM7> rb
move.w #MaxTout,d4 ; Reset the Timeout <13><SM7> rb
swap.w d4 ; get the Retry count <13><SM7> rb
subq.w #1,d4 ; Try again if Retry count not Exausted <13><SM7> rb
beq.s @Timeout ; <13>
@DeadEgret move.w #ErrEgretInit,d7 ; Egret failed <13>
move.l #0001,d6 ; d6.l must be nonzero <13>
bigjmp Error1Handler,a3 ; Play death chimes <13>
@VsrIrq
eieioSTP
tst.b vSR(a1) ; clear the interrupt
eieioSTP
bclr.b #vViafullbit,vBufB(a1) ; now indicate shift reg empty
eieioSTP
;
; Delay 100 usec
;
move.w #DelayCnt,d3
@wait20
eieioSTP
tst.b (a1) ; sync to VIA clock
eieioSTP
dbra d3,@wait20 ; delay at least 100 us (very rough)
eieioSTP
btst.b #vXcvrsesbit,vbufB(a1) ; check for abort
eieioSTP
@AbortReq rts5
;--------------------------------------------------------------------------
; DumpAbort This routine will read all the data for an abort transaction and
; discard it. When done it will jump back to SendNopCmd entry point
; to retry our command. This command will eventually complete...
RealAbort
eieioSTP
bclr.b #vSyssesbit,vBufB(a1) ; deassert system session
eieioSTP
IrqMissed bsr5 Delay100us ; Let Egret see SysSes. ≥ 125µsec
eieioSTP
bclr.b #SRdir,vACR(a1) ; shift in
eieioSTP
tst.b vSR(a1) ; discard the byte
eieioSTP
bset #vSyssesbit,vBufB(a1) ; assert vSyssesbit
eieioSTP
DumpAbort
eieioSTP
bclr #vViafullbit,vBufB(a1) ; then negate VIA full bit
eieioSTP
@loop
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s @loop
bset.b #vViafullbit,vBufB(a1) ; acknowlege byte
eieioSTP
tst.b vSR(a1) ; discard the byte
eieioSTP
;
; Delay 100 usec
;
move.w #DelayCnt,d3
@wait
eieioSTP
tst.b (a1) ; sync to VIA clock
dbra d3,@wait ; delay at least 100 us (very rough)
eieioSTP
btst.b #vXcvrsesbit,vBufB(a1) ; check for last byte
eieioSTP
beq.s DumpAbort ; Clock Tick Packets only 2 bytes
;
; Last byte was read
;
bclr #vViafullbit,vBufB(a1) ; then negate VIA full bit
eieioSTP
bclr.b #vSyssesbit,vBufB(a1) ; negate vSyssesbit
eieioSTP
bsr5 Delay100us ; delay 200 usec
bra.s SendEgretCmd ; go try sending our command again
;--------------------------------------------------------------------------
sendByte1 ; <2>
eieioSTP
bset.b #SRdir,vACR(a1) ; shift out
eieioSTP
move.b d0,vSR(a1) ; load byte into shift reg
eieioSTP
bset.b #vViafullbit,vBufB(a1) ; indicate shift reg is full
eieioSTP
@poll
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s @poll
tst.b vSR(a1) ; clear the interrupt
eieioSTP
bclr.b #vViafullbit,vBufB(a1) ; now indicate shift reg empty
eieioSTP
rts5
;--------------------------------------------------------------------------
readByte
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s readByte
bset.b #vViafullbit,vBufB(a1) ; Tell Egret we saw the byte
eieioSTP
move.b vSR(a1),d0 ; read the byte
;
; Delay 100 usec
;
eieioSTP
move.w #DelayCnt,d3
@wait
eieioSTP
tst.b (a1) ; sync to VIA clock
eieioSTP
dbra d3,@wait ; delay at least 100 us (very rough)
eieioSTP
bclr #vViafullbit,vBufB(a1) ; then negate VIA full bit
eieioSTP
rts5
;--------------------------------------------------------------------------
readAttn
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s readAttn
eieioSTP
tst.b vSR(a1) ; clear the interrupt
eieioSTP
rts5
;--------------------------------------------------------------------------
delay100us
move.w #DelayCnt,d3
; add.w d3,d3 ; let's make it even rougher
@wait
eieioSTP
tst.b (a1) ; sync to VIA clock
eieioSTP
dbra d3,@wait ; delay at least 100 us (very rough)
eieioSTP
rts5
;_______________________________________________________________________
;
; Routine: EclipsePDMPatch
;
; Desc: Patch for ECLIPSE PowerDown Messsage Handler Install
; and PowerDown Message Enable
;_______________________________________________________________________
EXPORT EclipsePDMPatch
EclipsePDMPatch
WITH EgretPB
;
; Initialize the Eclipse PowerDown Message handler.
;
movem.l a0-a1,-(sp) ; work registers
suba.l #EgretPbSize,sp ; make room for PB
move.l sp,a0 ; point a0 to pbBuffer <T3>
move.w #(PDMVectPkt << 8),pbCmdType(a0); InitPDM Vector Packet (Cmd ignored)
clr.l pbCompletion(a0) ; No Completion
lea KeySwitchHandler,a1 ; address of keyswitch sense handling <T5>
move.l a1,PbParam(a0)
_EgretDispatch
; •••••••••••••••••••••••••••••••••••••••••••••••••
; We don't want to enable messages where we set up the Power Down Message Handler. This is because <T10>
; up until the time a system is located to boot from, when the user turns the keyswitch OFF, there <T10>
; are no files to flush, no volumes to unmount and Caboose can safely turn the machine off with us <T10>
; getting in the way. Once we get a system loaded, we'll enable Power Down Messages with the other <T10>
; routine, EclipsePDEPatch() (see below). <T10>
; •••••••••••••••••••••••••••••••••••••••••••••••••
; We need to allocate a TimeMgr TMTask record that we can use once we enable power down messages so <T15>
; we can power the machine down even if UnMounts fail or hang. ExpandMemRec has JUST been initialized <T15>
; when this patch gets called, so this is safe to do. <T15>
WITH ExpandMemRec
movea.l expandMem,a1 ; get base of ExpandMemRec <T15>
moveq.l #(tmQSize+dtQElSize),d0 ; request a TimeMgr TMTask+Deferred Task-sized record in SysHeap <T15>
_NewPtr ,SYS,CLEAR ; <T15>
move.l a0,emKeyTMTaskPtr(a1) ; save pointer to TMTask record in ExpandMemRec <T15>
ENDWITH
adda.l #EgretPbSize,sp ; discard the parameter block
movem.l (sp)+,a0-a1 ; restore registers
@EgretDone
rts ; Return to Caller
;_______________________________________________________________________
;
; Eclipse Keyswitch Handler
; -------------------------
;
; This routines either
; (1) turns off Eclipse, or
; (2) catches and ignores keyswitch changes interrupts
; from Caboose, since we look directly at the keyswitch
; position values on VIA2[PB][v2Keyswitch] or [v2PowerOff].
;
; As of DVT hardware, the values of these keyswitch positions
; should be available on VIA2 and no longer need to be maintained
; in SW.
;_______________________________________________________________________
;
; PowerDown Message Handler
;
export KeySwitchHandler ; <T5>
import EgretPowerOff ; from EgretPatches.a <T14>
KeySwitchHandler ; Handler of Power Down / Keyswitch Sense messages <T5>
; Caboose sends a message whenever the keyswitch sense changes. <T5> thru next <T5>
;
; Input: D0.B Keyswitch position
;
; 0 OFF
; 1 Secure
; 2 Insecure or ON ("normal")
;
tst.b d0 ; check for PowerOff message <T10>
bne.s @rts ; IF Message == PowerDOWN THEN <T10>
movem.l a0-a1,-(sp) ; save A0, A1 <T15> thru next <T15>
; First, install a time manager task that will forcefull shut us down in 5 seconds. That way,
; in case something goes wrong with the deferred task, we will shut off anyway.
WITH ExpandMemRec
movea.l expandMem,a1 ; get base address of ExpandMemRec
movea.l emKeyTMTaskPtr(a1),a0 ; retrieve "final" Time Mgr queue element
movea.l a0,a1 ; use A1 to clear the record
moveq.l #((tmQSize+dtQElSize)/2)-1,d0 ; clear the TimeMgr+DeferredTask queue elements
@clrRec clr.w (a1)+ ; just in case someone has crapped them up
dbra d0,@clrRec
lea PullThePlug,a1 ; get address of where to go when timer expires
move.l a1,tmAddr(a0) ; tell the TimeMgr about it
_InsTime ; go install the Turn Off The Power Time Mgr task
move.l #(5*1000),d0 ; set timeout to be 5 SECONDS
_PrimeTime ; activate the task
; Now install the Deferred Task that will attempt to unmount all mounted volumes.
;
; The ExpandMemRec Ptr points at an area that is tmQSize+dtQSize bytes big.
;
; Initialize the Deferred Task queue element to point at our Unmount Volumes Deferred Task.
adda.w #tmQSize,a0 ; move A0 to point at the Deferred Task Queue Element
move.w #dtQType,dtType(a0) ; and initialize the record
lea EclipseAdios,a1
move.l a1,dtAddr(a0)
jsr ([jDTInstall]) ; go install our Unmount and Shutdown deferred task
movem.l (sp)+,a0-a1 ; restore A0, A1
tst.w d0 ; see whether or not deferred task install was done
bne.s PullThePlug ; if it failed, shut down RIGHT NOW
@rts rts ; if it was successful, return to the int. handler
ENDWITH
;_______________________________________________________________________
;
; Routine: EclipseAdios
;
; Desc: Deferred Task installed when the keyswitch is turned
; to the OFF position. This attempts to Unmount all
; volumes. Once that attempt has been made, the system
; is powered down.
;
; Inputs: None.
; Returns: None.
; Trashes: The System. Power to Eclipse is turned off. G'night.
;
;_______________________________________________________________________
EclipseAdios
; Try and unmount any mounted volumes before we power down.
move.l VCBQHdr+qHead,a1 ; Start at the head of the VCBQ
bra.s @checkVCB ; Check if valid
@UMloop
tst.w vcbFSID(a1) ; Make sure its FSID = 0
bne.s @nextQEntry ; ... i.e. not a server
; Try to unmount the volume.
sub.w #ioQElSize,a7 ; get an I/O param block
movea.l a7,a0
move.w vcbVRefNum(a1),ioVRefNum(a0) ; stuff VCB VRefNum into PB
move.l #0,ioFileName(a0)
move.l #0,ioCompletion(a0) ; no completion routine
move.l a1,-(sp) ; save A1 (queue link ptr)
_HUnmountVol ; attempt to forcefully unmount volume
movea.l (sp)+,a1 ; restore A1
adda.w #ioQElSize,a7 ; get rid of PB. we'll reallocate the PB if needed
@nextQEntry movea.l qLink(a1),a1 ; get next queue entry
@checkVCB move.l a1,d0 ; at EOQ yet?
bne.s @UMloop ; nope, try this one
PullThePlug ; ENDIF
bsr.l EgretPowerOff ; power junkies go into sudden withdrawl <T16>
bra.s PullThePlug ; with no hope of recovery <T16>
;_______________________________________________________________________
;
; Routine: EclipseDFACPatch
;
; Desc: Patch for ECLIPSE send default DFAC Messsage
;_______________________________________________________________________
EXPORT EclipseDFACPatch
EclipseDFACPatch
;
; Build a Parameter block for the default DFAC message
;
movem.l a0-a1,-(sp) ; work register
suba.l #EgretPbSize,sp ; make room for PB
move.l sp,a0 ; point a0 to pbBuffer <T4>
move.w #(pseudoPkt << 8) \
+ SetDefDFAC,pbCmdType(a0) ; InitPDM Vector Packet (Cmd ignored)
clr.l pbCompletion(a0) ; No Completion
;
; Build the DFAC message issue the call and clean up
;
move.w #$0100,-(sp) ; byte count and one DFAC byte in buffer
move.l sp,pbBufPtr(a0) ; Buffer pointer
move.w #$0002,pbByteCnt(a0) ; byte count includes the byte count byte in the buffer
_EgretDispatch
adda.l #EgretPbSize+2,sp ; discard the parameter block and data buffer
movem.l (sp)+,a0-a1
@EgretDone
rts ; Return to Caller
;_______________________________________________________________________ <T16> thru next <T16>
;
; Routine: DebugUtilRunKbdPatch
;
; Desc: Checks to see if the machine we're running on has a
; keyswitch, and if so, if it's in the OFF position.
; If so, then we probably don't have any choice as to
; whether volumes can be flushed and unmounted, so we
; go directly to the PowerOff routine. Do not pass Go,
; do not collect $200. (is that 200 hex dollars?)
;
; NOTE: This handles both the DebugEnter _and_ DebugPoll cases.
;_______________________________________________________________________
EXPORT DebugUtilRunKbdPatch ; provide address to InterruptHandlers.and anyone else
DebugUtilRunKbdPatch
TestFor KeyswCabooseBit ; do we have a caboose? <21>
beq.s @justDoIt ; nope <21>
; If you made it here, you're a Caboose-flavor keyswitch.
;
; VIA2 has v2PowerOff and v2Keyswitch (SECURE mode) wired, with 0=TRUE.
move.l a1,-(sp) ; save A1 temporarily
movea.l VIA2RBV,a1 ; retrieve address of VIA2
eieioSTP
btst.b #v2PowerOff,VBufB(a1) ; is the keyswitch OFF?
eieioSTP
move.l (sp)+,a1 ; restore A1
beq.s @powerOff ; IF Keyswitch != OFF THEN
@justDoIt
bra DebugPwrMgrADBPatch2 ; check for PowerMgr stuff
@powerOff ; ELSE
bra.s PullThePlug ; administer the death blow <T16>
DebugPwrMgrADBPatch2
TestFor hwCbPwrMgr ; see if we have a power manager
beq.s @noPmgrADB ; if not, skip it
movea.l VIA,a1 ; point to the VIA
movea.l Lvl1DT+(ifCB1*4),a0 ; get the handler address
jsr (a0) ; call the interrupt handler
addq.l #4,SP ; clean up stack from bsr
movem.l (sp)+,d3/a3 ; restore registers
rts
@noPmgrADB
rts
;_______________________________________________________________________
;
; Routine: EgretDFACandPDM formerly: EclipseEgretPatches <P4><MC2>
;
; Desc: Calls egret patches for Eclipse with Caboose, keyswitch
; Calls Egret patches for Anyone with Cuda, SoftPower Off
;_______________________________________________________________________
EXPORT EgretDFACandPDM
IMPORT CudaPDMPatch
EgretDFACandPDM
move.l #EgretFWMask, d0 ; get productInfo record mask for Egret FW
and.l UnivRomFlags,d0 ; isolate the field
sub.l #Caboose,d0 ; Do we have an Egret/Caboose?
bne.s @Done ; -> Nope. Don't do nothing!
; Instead of calling EclipseDFACPatch, this should more generally initialize DFAC
; for all machines that care about it (or even if we don't but it needs it anyway).
; -- bg/djw, 12/6/90
@EgretCaboose
bsr EclipseDFACPatch ; call the Eclipse DFAC control patch
bsr EclipsePDMPatch ; call the Eclipse keyswitch/PowerDown Msgs patch
@Done rts ; Return to Caller
;--------------------------------------------------------------------------
;ChkFirmware <P2>
;
; This routine will determine if the Egret Chip is using Egret 8 or Caboose
; firmware or the new Cuda firmware. Based on this result, the IRQ handler,
; Dispatcher, and Tick handler vectors are set up...
; Inputs:
; A2 -> EgretGlobals
; Outputs:
; A0 -> ShiftRegIRQ
; A1 -> TickHandler
; Trashes:
; A0,A1
ChkFirmware ; <P2>
movem.l a2/d0-d2, -(sp) ; preserve used regs
move.l #EgretFWMask,d0 ; mask for EgretFW <MC2>
and.l UnivRomFlags,d0 ; isolate the field
sub.l #Egret8,d0 ; see if we have EgretFW
beq.s @haveEgret ; set Zero flag, exit
; If we dont have Egret FW, we still might have an Caboose FW
sub.l #Egret8,d0 ; see if we have CabooseFW
beq.s @haveCaboose ; if we do, chk for Cuda
@haveCuda ;
biglea CudaDispatch, a0 ; Cuda FW dispatcher
move.l #$92,d0 ; set $92 trap
_SetTrapAddress ,NEWOS
biglea CudaShiftRegIRQ,a0 ; stuff Cuda IRQ handler in
biglea CudaTickHandler,a1 ; stuff Cuda tick handler in
bra.s @chkDone ;
@haveEgret
@haveCaboose
lea EgretDispatch, a0 ; Egret FW dispatcher
move.l #$92,d0 ; set $92 trap
_SetTrapAddress ,NEWOS ;
;
lea ShiftRegIRQ,a0 ; stuff Egret IRQ handler in
lea tickHandler,a1 ; stuff Egret tick handler in
@chkDone
movem.l (sp)+, a2/d0-d2 ; restore used regs
rts
;-------------------------------------------------------------------------- <P2>
;SendEgretCmdPatch
;
; This routine will determine if the Egret Chip is using Egret 8 or Caboose
; firmware or the new Cuda firmware. From the firmware type, determine what
; routine to use, SendEgretCmd for Egret or Caboose, and SendCudaCmd for Cuda
;
; NOTE: This routine is REGISTER based, there isn't a stack <P4>
; SendEgretCmd is called via BSR6, so must Preserve A6, as the return address <P4>
; SendEgretCmdPatch is called via a BSR5 return is in A5 <P4>
; Input:
; a0.l Pointer to Base address table
;
; d0.l = High word PACKET Command
; Low word PACKET Type
;
; d1.l = Up to four bytes of data to send
; Long word data byte assigment = byte 4, byte 3, byte 2, byte 1
; Byte 1 sent out first
;
; d2.l = Byte count to send. (0-4 bytes)
; Byte count > 4 will send four bytes only
;
;-------------------------------------------------------------------------- <P2>
SendEgretCmdPatch
move.l a5, a3 ; preserve patch return addr
move.l a6, a4 ; preserve EgretInit rtn addr
bigbsr6 GetHardwareInfo,a1 ;
move.l a4, a6 ; restore EgretInitrtn addr
move.l a3, a5 ; restore patch rtn addr
moveq.l #ProductInfo.ADBMask,d0 ;mask for ADB kind <23>
and.l d1,d0 ;isolate the field <23>
subq.l #ProductInfo.ADBEgret,d0 ;see if we have Egret ADB <23>
and.l #EgretFWMask,d4 ; isolate the field
sub.l #Egret8,d4 ; see if we have Egret8 FW
beq.s @patchdone ; if we do, zero flag set
;
; If we dont have Egret FW, we still might have an Caboose
;
sub.l #Egret8,d1 ; see if we have Caboose FW
@haveEgret ; if we do, zero flag set
beq.s @patchdone ; its Egret or Caboose, just exit...
@haveCuda ;
bigjmp SendCudaCmd,a3 ; jump to Cuda Send routine
@patchdone ;
movea.l DecoderInfo.VIA1Addr(a0),a1 ; get VIA 1 base address
move.l #((MaxTout<<16) OR MaxRetries),d4 ; number of retries before giving up with Egret <13>
rts5
;--------------------------------------------------------------------------
;EgretInitPatch
;
; This routine will determine if the Egret Chip is using Egret 8 or Caboose <P4>
; firmware or the new Cuda firmware. From the firmware type, determine what
; routine to use, EgretInit for Egret or Caboose, and CudaInit for Cuda
;
; NOTE: This routine is REGISTER based, there isn't a stack
; EgretInit is called via BSR6, so must Preserve A6, as the return address
; EgretInitPatch is called via a BSR5 return is in A5
;
EgretInitPatch ;
move.l a5, a3 ; preserve patch return addr
move.l a6, a4 ; preserve EgretInit rtn addr
bigbsr6 GetHardwareInfo,a1 ;
move.l a4, a6 ; restore EgretInitrtn addr
move.l a3, a5 ; restore patch rtn addr
and.l #EgretFWMask,d1 ; isolate the field
sub.l #Egret8,d1 ; see if we have Egret8 FW
beq.s @patchdone ; if we do, zero flag set
;
; If we dont have Egret FW, we still might have an Caboose
;
sub.l #Egret8,d1 ; see if we have Caboose FW
@haveEgret ; if we do, zero flag set
beq.s @patchdone ; its Egret or Caboose, just exit...
@haveCuda ;
bigjmp CudaInit,a3 ; jump to CudaInit routine in CudaMgr.a
@patchdone ;
movea.l DecoderInfo.VIA1Addr(a0),a1 ; get VIA 1 base address
eieioSTP
bclr.b #vsysSesBit,vBufB(a1) ; kill any pending transactions <8> <13> <P2>
eieioSTP
bclr.b #vViaFullBit,vBufB(a1) ; <8> <13> <P4>
eieioSTP
rts5
TerrorEgret
IMPORT ExplicitRequestDone, ImplicitRequestDone
;_______________________________________________________________________
;
; Routine: StartReqEgret
; Inputs: D2 - length of transmit buffer data
; D3 - command byte / implicit flag (bit 31)
; A2 - pointer to buffer containing transmit data
; A3 - pointer to ADBBase
;
; Outputs: A3 - pointer to ADBBase
;
; Destroys: A0-A2/D0-D2
; Calls: exits through _EgretDispatch
;
; Function: Sends an ADB request to the Egret, and asynchronously waits for a reply.
;
;_______________________________________________________________________
with ADBVars,EgretPB
jEgretDispatch equ OSTable+($92*4) ; OS trap table entry for _EgretDispatch
StartReqEgret
tst.l d3 ; see if explicit/implicit
bmi.s @implicit ; if implicit, we generally don't need to do anything
;_______________________________________________________________________
; Process Explicit Requests
@explicit bset.b #fDBExpRunning,fDBAuFlag(a3); explicit command starting, exclude new ones
bne.s @ignoreExplicit ; if already in progress, don't run it twice
move.b d3,ExplicitEPB.pbCmd(a3) ; setup the ADB command
move.w d2,ExplicitEPB.pbByteCnt(a3); setup byte count
move.l a2,ExplicitEPB.pbBufPtr(a3) ; setup buffer pointer
bset.b #fDBExpInited,fDBAuFlag(a3) ; see if explicit command initialization has occured
bne.s @expInited ; if already inited, no need to change anything
lea @ExplicitCompleted,a0 ; explicit request completion routine address
move.l a0,ExplicitEPB.pbCompletion(a3) ; setup buffer pointer
lea ImplicitEPB(a3),a0 ; point to the param block used to wait for autopoll data
clr.l pbCompletion(a0) ; remove the handler
bsr.s @SendToEgret ; remove the auto poll handler
move.l #(pseudoPkt<<24)\ ; pcCmdType := pseudoPkt
+(aPoll<<16)\ ; pbCmd := aPoll
+($00<<8),d0 ; pbParam := $00 (only high byte is used)
bsr.s @syncReq ; send command to stop auto polling
@expInited
lea ExplicitEPB(a3),a0 ; point to the param block
@SendToEgret
moveq.l #0,d1 ; zero the trapword flag bits (in case they ever get used)
movea.l jEgretDispatch,a2 ; get the OSTrap table entry
jmp (a2) ; _EgretDispatch, issue the request (asynchronously), return
;_______________________________________________________________________
; Process Implicit Requests
@implicit btst.b #fDBInit,fDBFlag(a3); see if initialization is happening
bne.s @impDone ; if so, implicit commands are ignored
bset.b #fDBImpInited,fDBAuFlag(a3) ; see if implicit command initialization has occured
beq.s @InitImplicit ; if not inited, do initialization to allow autopolling
@ignoreExplicit
@impDone rts ; auto-polling/srq data will arrive unsolicited from now on
@InitImplicit
lea ImplicitEPB(a3),a0 ; point to the param block used to wait for autopoll data
lea @ImplicitCompleted,a1 ; handler address
move.l a1,pbCompletion(a0) ; install the handler
bsr.s @SendToEgret ; install the auto poll handler
move.l #(pseudoPkt<<24)\ ; pcCmdType := pseudoPkt
+(wrDevList<<16),d0 ; pbCmd := wrDevList
move.w DevMap(a3),d0 ; pbParam := DevMap (in first 2 bytes)
bsr.s @syncReq ; send command to specify auto polling addresses
move.l #(pseudoPkt<<24)\ ; pcCmdType := pseudoPkt
+(aPoll<<16)\ ; pbCmd := aPoll
+($FF<<8),d0 ; pbParam := $FF (only high byte is used)
; send command to start auto polling
@syncReq suba.w #EgretPBSize,sp ; allocate a param block on the stack for a sync call
movea.l sp,a0 ; point to the param block
move.l d0,pbCmdType(a0) ; init pcCmdType, pbCmd, and high word of pbParam
clr.l pbCompletion(a0) ; no completion routine, sync call
bsr.s @SendToEgret ; call send the request off to the ADB micro
adda.w #EgretPBSize,sp ; deallocate the param block
rts ; auto-polling/srq data will arrive unsolicited from now on
Title 'KbdADB - ADB Manager - ExplicitCompleted'
;_______________________________________________________________________
;
; Routine: @ExplicitCompleted
; Inputs: A0 - Pointer to the EgretPB of the Explicit Request
;
; Outputs: D2 - length of receive buffer data
; D3 - command byte / SRQ flag (bit 31)
; A2 - pointer to buffer containing receive data
; A3 - pointer to ADBBase
;
; Calls: exits through ImplicitRequestDone / ExplicitRequestDone
; Called by: Egret Manager, Asynchronous request completion routine
;
; Function: Completion routine for servicing explicit ADB requests.
;
;_______________________________________________________________________
@ExplicitCompleted ; A0 := pointer to EgretPB
if EgretDebug then
btst.b #EgAutoPoll,pbFlags(a0) ; see if this was from auto poll
beq.s @ExplicitOK ; if not, we're still OK
_Debugger ; something is wrong with this picture
@ExplicitOK
endif
moveq.l #(1<<EgSRQ),d3 ; mask to test for SRQ pending
and.b pbFlags(a0),d3 ; isolate the SRQ flag
neg.l d3 ; set bit 31 if SRQ pending
move.b pbCmd(a0),d3 ; get the ADB command byte
moveq #0,d2 ; zero extend the length
move.w pbByteCnt(a0),d2 ; get the length
movea.l pbBufPtr(a0),a2 ; get the buffer pointer
bsr.s @FillInVars ; setup A3, and ADB globals for ADB Parser
bclr.b #fDBExpRunning,fDBAuFlag(a3) ; explicit command completed, allow new ones
;
; For Egret must check the ADB Device address against the Device Bitmap <5>
; to see if the device exists. If it does not, force Egret to Poll the Mouse
; as the MRU device and Keyboard as the LRU device. (Bug Fix for Egret)
;
; Entry: a3.l = ADB Globals
; d0.b = ADB device address
move.w devmap(a3),d1 ; get the ADB device Bitmap
btst.l d0,d1 ; check bit position in low word
bne.s @exit ; Device Exits
;------------------------------------------------------------------------------
; Force the MRU & LRU values to Mouse & Keyboard to work around bug where Egret
; AutoPolls devices which are not in the DevMap.
;
; Entry: NONE
;
; Exit: NONE
;
; Destroys: NONE
;
;------------------------------------------------------------------------------
suba.l #EgretPbSize,sp ; make room for Egret Manager PB
movea.l sp,a0
move.l #0,pbCompletion(a0) ; no Completion vector
move.w #((pseudoPkt << 8) + \
Wr6805addr),pbCmdType(a0) ; packet type & command
move.w #((MouseAddr * $1000) + \ ; Mouse & Keyboard into MRU & LRU
(KbdAddr * $10)),-(sp) ; Mouse Addr in bits C-F, Kbd Addr bits 4-7
move.l sp,pbBufPtr(a0) ; buffer pointer in PB
move.w #MRUAddr,pbParam(a0) ; Egret address to write
move.w #2,pbByteCnt(a0) ; 2 bytes to write
_EgretDispatch ; issue the call
adda.l #EgretPbSize+2,sp ; Discard Buffer & Parameter block <5>
@exit
bigjmp ExplicitRequestDone,a0 ; Return control to the ADB Manager
@FillInVars movea.l ADBBase,a3 ; point to ADB globals in low memory
; keep the ADB Parser program happy by updating the following variables
; They are not used by this implementation, but we fill them in with approximate
; values to make the tool happy.
move.b d3,fDBCmd(a3) ; last ADB command
move.b d3,pollCmd(a3) ; assume that it was a poll command
move.b d3,d0 ; copy the command
lsr.b #4,d0 ; get the address
move.b d0,pollAddr(a3) ; assume that it was a poll address
rts ; all done
Title 'KbdADB - ADB Manager - ImplicitCompleted'
;_______________________________________________________________________
;
; Routine: @ImplicitCompleted
; Inputs: A0 - Pointer to the EgretPB of the Implicit Request
; D0 - Number of data bytes returned (word, 0..8)
; A1 - Pointer to Flags, Command, Data Buffer
;
; Outputs: D2 - length of receive buffer data
; D3 - command byte / SRQ flag (bit 31)
; A2 - pointer to buffer containing receive data
; A3 - pointer to ADBBase
;
; Calls: exits through ImplicitRequestDone / ExplicitRequestDone
; Called by: Egret Manager, Asynchronous request completion routine
;
; Function: Completion routine for servicing explicit ADB requests.
;
;_______________________________________________________________________
@ImplicitCompleted
if EgretDebug then
btst.b #EgAutoPoll,(a1) ; see if this was from auto poll
bne.s @ImplicitOK ; if so, we're still OK
_Debugger ; something is wrong with this picture
@ImplicitOK
endif
moveq.l #(1<<EgSRQ),d3 ; mask to test for SRQ pending
and.b (a1)+,d3 ; isolate the SRQ flag
neg.l d3 ; set bit 31 if SRQ pending
move.b (a1)+,d3 ; get the ADB command byte
moveq #0,d2 ; zero extend the length
move.w d0,d2 ; get the length
movea.l a1,a2 ; get the buffer pointer
bsr.s @FillInVars ; setup A3, and ADB globals for ADB Parser
bigjmp ImplicitRequestDone,a0 ; Return control to the ADB Manager
endwith
Export DebugEnterCont
DebugEnterCont
with ProductInfo
move.l UnivRomFlags,d0 ; get the Universal system flags
andi.l #ADBMask,d0 ; we want ADB
cmpi.l #ADBEgret,d0 ; and specifically EGRET version of ADB
bne.s @EgretDone
endwith
;
; Build a Egret Parameter block to stop 1 second interrupts
;
WITH EgretPb
move.l a0,-(sp) ; work registers
suba.l #EgretPB.EgretPbSize,sp ; room for parameter block
move.l sp,a0 ; point to the parameter block
move.w #(EgretPB.EgretPBSize/2)-1,d0 ; clear the PB area a word at a time
move.l a0,-(sp) ; save pointer to parameter block
@Loop move.w #0,(a0)+ ; zeros forces mode 0 & no Completion vector
dbra d0,@Loop
move.l (sp)+,a0 ; restore parameter block pointer
move.w #((pseudoPkt << 8) + Wr1SecMode),EgretPB.pbCmdType(a0) ; Packet type & command
_EgretDispatch
;
; Suspend the PDM, with out reseting vars within Cuda
;
move.w #(PseudoPkt << 8) \
+ EnDisPDM,pbCmdType(a0); Enable PowerDown Messages <P3>
clr.l pbParam(a0) ; clr parameter blk <P3>
move.b #PDMSuspend,pbParam(a0) ; PDM Continue <P3>
clr.l pbCompletion(a0) ; No Completion <P3>
; _EgretDispatch <SM11> gjs
adda.l #EgretPB.EgretPbSize,sp ; discard parameter block
move.l (sp)+,a0 ; restore work registers
ENDWITH
@EgretDone
moveq.l #noErr,d0 ; return with success
rts
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Export DebugExitCont
DebugExitCont
with ProductInfo
move.l UnivRomFlags,d0 ; get the Universal system flags
andi.l #ADBMask,d0 ; we want ADB
cmpi.l #ADBEgret,d0 ; and specifically EGRET version of ADB
bne.s @EgretDone
endwith
;
; Build a Egret Parameter block to start 1 second interrupts (Mode 3)
;
WITH EgretPB
move.l a0,-(sp) ; work registers
suba.l #EgretPB.EgretPbSize,sp ; room for parameter block
move.l sp,a0 ; point to the parameter block
move.w #(EgretPB.EgretPBSize/2)-1,d0 ; clear the PB area a word at a time
move.l a0,-(sp) ; save pointer to parameter block
@Loop move.w #0,(a0)+ ; zeros forces mode 0 & no Completion vector
dbra d0,@Loop
move.l (sp)+,a0 ; restore parameter block pointer
move.w #((pseudoPkt << 8) + Wr1SecMode),EgretPB.pbCmdType(a0) ; Packet type & command
move.b #Mode3Clock,EgretPB.pbParam(a0) ; Turn on Mode 3 clock data packets
_EgretDispatch
;
; Macsbug Continue the PDM
;
move.w #(PseudoPkt << 8) \
+ EnDisPDM,pbCmdType(a0); Enable PowerDown Messages <P3>
clr.l pbParam(a0) ; clr parameter blk <P3>
move.b #PDMDebugCont,pbParam(a0) ; Macsbug Continue <SM11> gjs <P3>
clr.l pbCompletion(a0) ; No Completion <P3>
_EgretDispatch
adda.l #EgretPB.EgretPbSize,sp ; discard parameter block
move.l (sp)+,a0 ; restore work registers
@EgretDone
ENDWITH
moveq.l #noErr,d0 ; return with success
CLR.B DSWndUpdate ; flag GNE to remove the alert . . . just in case <SM11> gjs
rts
ENDP
END