supermario/base/SuperMarioProj.1994-02-09/Internal/Rez/HardwarePrivateEqu.r
2019-06-29 23:17:50 +08:00

2647 lines
163 KiB
R
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//__________________________________________________________________________________________________
//
// File: HardwarePrivateEqu.r (generated from HardwarePrivateEqu.a)
//
// Contains: Macintosh assembly equates THAT ARE NOT TO BE RELEASED TO THE WORLD.
//
// Copyright: © 1990-1993 by Apple Computer, Inc., all rights reserved.
//
// Change History (most recent first):
//
// <SM14+> 8/4/93 JDR private sound defines are in SoundPrivate.a
// <SM14> 6/9/93 kc Roll in Ludwig.
// <LW2> 2/24/93 chp Added equates for the PSC wait/request multiplexer control bits
// in VIA1.
// <SM13> 8/17/92 CCH Bumped HeapStart to $2800.
// <SM12> 8/7/92 JDB Changed Singer control register to have 0 for the output
// attenuation and 5 for the input gain.
// <SM11> 07-14-92 jmp (ag,H24) Change the name of a bit from PontiSndExtMic to
// PontiSndIntMic
// (jmp,H23) Added some additional DAFB equates for the WombatDAFB
// code.
// (BG,H22) Added one more djMEMC-related symbolic definition
// (dj_MaxBanks).
// <SM10> 6/21/92 ejb Adding bit field definitions for dspOverrun register in PSC.
// <SM9> 6/21/92 RB Adding runtime support for EVT1 and EVT2 Cyclones. Defined
// temporary equates for the EVT1 Cyclone units.
// <SM8> 6/18/92 KW (BG,H21) Added djMEMC memory controller equates for Wombat and
// WLCD.
// (jmp,H20) Wombat has a different dot-clock chip than
// Spike/Eclipse/Zydeco, so I added an equate to reflect this.
// <SM7> 6/18/92 RB Added equates for the new EVT2 (final offsets) of the VIA2 on
// Cyclone. The old values are still supported under the
// conditional forEVT1. These should be deleted once everyone moves
// to EVT2 boards. Did the same with MUNIBase as well.
// <SM6> 6/4/92 KW (fau,P18) Added and equate for Civic_VidInDble to support Civic
// II.
// <SM5> 5/25/92 RB Removed a forCyclone conditional. This should be the last one
// left. Renamed MSCBank1Enable to MSCBank8M.
// <SM4> 5/21/92 RB Making changes for Cyclone. Some comments may be duplicated due
// to the Pandora/Terror history. <P17> 5/13/92 KW (ag,H18) Added
// Ponti Definitions. (BG,H17) Added symbol v2MicCtl to the VIA2
// bit definitions. This is a microphone control bit that is
// defined for Wombat. Also updated some comments from Eclipse and
// Zydeco to the appropriate Quadra names. <P16> 4/16/92 KW (SWC,
// H16) Set bufWorldSize to 8K so Macsbug won't load into the
// middle of DBLite's sound buffer and get trashed when a sound is
// played. <P15> 03/24/92 jmp Renamed one of the MMC registers to
// something more appropriate (i.e., MMC_Interlace to
// MMC_ClockSelect). <P14> 03/22/92 jmp Put back <P12>. <P13>
// 3/19/92 FU Rolled back changes in <P12>. <P12> 3/18/92 FU
// (SWC,H15) Added SCSI DiskMode bit definitions for Niagra to the
// VIA 1 list. <P11> 03/04/92 jmp Updated the comments and changed
// the names of some of the Civic-related equates. <P10> 02/28/92
// jmp (ejb) Turned off the DSP frame-interrupt enable bit so that
// DSP driver doesnt suffer frame overrun when it trys to boot the
// DSP. <P9> 02/20/92 jmp (JC,H14) Define PatchFlags in unused by
// of ROM header ($0014). Define PatchBits based on available
// features in BBSStartup. Include support for Horror based and
// Pandora (Cyclone) based ROMs. <P8> 2/19/92 chp (jmp,H13) Put a
//hasSonora1conditional around the Sonora video control
// register base address to reflect impending hardware changes to
// Sonora. <P7> 02/07/92 jmp (HJR,H12) Added new Niagra Equates.
// (SWC,H11) One more go-round on MSC configuration: RAM bank 1
// needs to be disabled since there's only 2MB on DBLite LC.
// (SWC,H10) Fixed the MSC configuration value: it needs to be
// setup for a minimum amount of RAM so that the sound FIFO will
// always exist in real RAM for BootBeep. (SWC,H9) Added an equate
// for the default MSC configuration register value. Also, added
// Civic and Civic-related equates for Cyclone. <P6> 2/5/92 RMP
// Added MUNI equates. <P5> 1/21/92 mal Added PSC VIA2 equates <P4>
// 1/18/92 RMP Added PSC sound equates. <P3> 1/15/92 RP Fixed
// header (sorry). <P2> 1/15/92 RP Added new VIA definition bits
// and MMC equates.
// <SM3> 5/17/92 kc Roll in Horror Changes. Comments follow:
// <H16> 4/8/92 SWC Set bufWorldSize to 8K so Macsbug won't load into the middle of
// DBLite's sound buffer and get trashed when a sound is played.
// <H15> 3/3/92 SWC Added SCSI DiskMode bit definitions for Niagra to the VIA 1
// list.
// <H14> 2/19/92 JC Define PatchFlags in unused by of ROM header ($0014). Define
// PatchBits based on available features in BBSStartup. Include
// support for Horror based and Pandora (Cyclone) based ROMs.
// <H11> 1/23/92 SWC One more go-round on MSC configuration: RAM bank 1 needs to be
// disabled since there's only 2MB on DBLite LC.
// <H10> 1/22/92 SWC Fixed the MSC configuration value: it needs to be setup for a
// minimum amount of RAM so that the sound FIFO will always exist
// in real RAM for BootBeep.
// <H9> 1/22/92 SWC Added an equate for the default MSC configuration register
// value.
// <H8> 12/20/91 JC Create common Via2/RBV offset equates and temporary redefinition
// on Sonora Specific builds to only use RBV offsets
// <H6> 12/03/91 jmp Added various (but not yet complete) SonoraAddr and
// Sonora-VDACAddr equates. Sorry to have cancelled your check-out
// swc, but we had pressing needs.
// <H5> 11/26/91 jmp Added equates for the GSC.
// <H4> 11/25/91 SAM Added Sonora specific equate for RAMSize reg.
// <H2> 8/5/91 SWC Added MSCPowerCycle, the offset to the power cycle register from
// the base of the MSC.
// <T21> 7/8/91 HJR Rename JAWSAuxWaitS to JAWSEconoMode register to reflect its new
// pupose in life.
// <T20> 5/24/91 jmp Added another VIA2, port A, bit-7 equate for Spike & Eclipse:
// v2SyncOnGreen. This bit allows us to enable & disable the
// sync-on-green signal in ACDC.
// <T19> 5/10/91 djw Add sound input select bits for Eclipse in VIA2
// <T18> 5/1/91 HJR Added in register definitions for the MSC memory controller
// (DB-Lite).
// <T17> 4/1/91 BG Modified the v2Keyswitch bit definition to agree with what it
// will be on DVT Eclipse.
// <T14> 3/3/91 BG Added bit definition for Eclipse Keyswitch bit in VIA2.
// <T12> 2/16/91 BG Added Orwell constants to deal with 33MHz.
// <T8> 1/18/91 CCH Added equates for Spike's VIA2.
// <T6> 11/7/90 BG Made changes for new rev. of Orwell (2) permanent.
// <SM2> 4/22/92 RB Moved the start of the System heap in order to get some space
// for vector tables. This movement of the heap from $2000 to $2100
// is for experimentation and will need to be changed at a later
// date.
// <35> 12/31/91 RB Renamed JAWSAuxWaitS to JAWSEconoMode to reflect its real
// purpose.
// <34> 12/29/91 RB Updated some of the Terror constants.
// <33> 10/28/91 SAM/KSM Rolled in Regatta file.
//
//
// <2> 8/8/91 SAM (pdw, ag) Added some equates from HardwarePrivateEqu in
// TERROR.
// <1> 8/8/91 SAM Split off from 7.0 GM sources.
//
//
// <32> 10/1/91 JSM Dont use eclipseDebug.
// <31> 8/30/91 DTY Complicate matters so onMac32 stuff doesnt get defined for
// onMac, onMacPP, or onMacHc. (Since these arent defined in
// BBSStartup anymore, this is necessary.)
// <30> 8/22/91 JSM Clean up header.
// <29> 7/24/91 MH Added conditional wrapper(s) to prevent duplication of public
// interface declarations: TimeSCSIDB
// <28> 1/30/91 gbm sab, #38: Change the already including this file variable to
// all uppercase (for security reasons)
// <27> 11/26/90 gbm (and bbm) On 7.0 (and other places eventually) HiIntMask will be
// $0700 instead of $0300 all the time, not just when on a
// non-Plus.
// <26> 10/22/90 JJ Rex V8: Added equates for V8 registers
// <25> 9/24/90 BG Added symbolic names for the Data and Instruction Cache enable
// bits for the CACRs of various machines.
// <24> 9/13/90 MSH A couple of VIA2 assignments have changed for TIM.
// <23> 9/1/90 BG Updated and added various constants to agree with the EVT1
// version of the Eclipse board.
// <22> 7/11/90 gbm Take out some things that are in SysEqu.a
// <21> 7/6/90 CCH Changed default ROM wait states and RAM refresh rate for
// Eclipse.
// <20> 6/27/90 CCH Took out the conditionals around TestInRam!
// <19> 6/27/90 CCH TestInRAM macro gets compiled when eclipseDebug is set.
// <18> 5/24/90 HJR Update Machine equate to 7 instead of 6 for newer machines.
// <16> 4/4/90 HJR Clean up some build problems.
// <15> 4/4/90 MSH forrom removal.
// <14> 4/4/90 MSH Merged HardwareEqu.a back into HardwarePrivateEqu.a and
// restructured/rewrote the resultant file. This action obsoletes
// HardwareEqu.a. All future equate additions should be done to
// HardwarePrivateEqu.a only.
// <13> 3/29/90 MSH Add VIA2 labels for Waimea.
// <12> 3/22/90 JJ Force definition of onElsie=0 if onElsie is undefined.
// <11> 2/14/90 DAF Added VISA register names. Since Elsie isn't fully integrated,
// it doesn't have real feature conditional yet.
// <10> 2/9/90 BG Modified ORWELL_INIT value to reflect the parts being used on
// the Eclipse prototype.
// <9> 2/9/90 JJ Added RvExp, offset of RBV Expansion Register in Elsie.
// <8> 2/9/90 BG Moved EQUs for the Eclipse VIA2 out of the -ELSEIF onEclipse-,
// as those definitions will be used even if the -onEclipse-
// conditional stuff is not used.
// <7> 2/2/90 BG Missed one re-definition in previous change.
// <6> 2/2/90 BG Modified some bits in the Eclipse VIA2 buffer A description to
// have relevant mnemonic names.
// <5> 1/31/90 BG Added Orwell-specific register bit definitions, address offsets
// and configuration register initial values.
// <4> 1/30/90 BG Added Eclipse-specific hardware constant definitions.
// <3> 1/18/90 SWC Updating FMCInit and FMCRPUInit with the final values.
// <2> 1/12/90 CCH Added missing ENDIF.
// <1> 1/11/90 CCH Moved in private equates from “HardwareEqu.a”.
//
// NOTE:
//
// For change history versions not mentioned in the above -Change History-, refer
// to <Sources>:Interfaces:AIncludes:HardwareEqu.a.
//
#ifndef __INCLUDINGHARDWAREPRIVATEEQU__
#define __INCLUDINGHARDWAREPRIVATEEQU__ 1
//__________________________________________________________________________________________
//
// Welcome to the New Hardware Equates File. By following some simple procedures this file
// can keep its youthful appearance for years to come. This file is a recombination of
// HardwareEqu.a and HardwarePrivateEqu.a. Everyone should be using this file only. Please
// change any of your files that use either of the hardware equate files to use only this one.
// HardwareEqu.a will be left as an historical artifact for future generations.
//
// To help you navigate through this file use the "Mark" menu item, and please help to keep
// it current. When you add a new section, add a handy mark to find it again. Equates are
// grouped in a semi-logical way in the follwing order:
//
// Chip Offsets - Register offsets for the 'standard' Mac peripheral chips.
// Chip Offsets 2 - Register offsets for the 'non-standard' Mac peripheral chips.
// VIA1 - Register offsets and pin descriptions.
// VIA2 - Register offsets and pin descriptions.
// RBV - Register offsets and pin descriptions.
// VISA - Register offsets and pin descriptions.
// Memory Controllers - Register definitions and miscellaneous equates.
// Interrupts - Auto vector names and mask definitions.
// Miscellaneous - The "Smorgasboard" of equates.
// Old 16 Bit Equates - Machine dependent equates for Mac, MacPP, HcMac, and Mac16.
//
//
//__________________________________________________________________________________________
//__________________________________________________________________________________________
//
//
// Chip Offsets - Register offsets for "standard" Mac chips. This includes the following:
// IWM, SWIM, SCC, SCSI (with and without DMA), ASC.
//
//
//__________________________________________________________________________________________
//---------------------------------------------------
// IWM Offsets
//---------------------------------------------------
#define ph0L 0 // disk address offsets from base
#define ph0H $200
#define ph1L $400
#define ph1H $600
#define ph2L $800
#define ph2H $A00
#define ph3L $C00
#define ph3H $E00
#define mtrOff $1000
#define mtrOn $1200
#define intDrive $1400 // enable internal drive address
#define extDrive $1600 // enable external drive address
#define q6L $1800
#define q6H $1A00
#define q7L $1C00
#define q7H $1E00
#define IWMInitMode $17 // initial IWM mode setting <3.5>
//---------------------------------------------------
// SWIM offsets
//---------------------------------------------------
#define wData $0000 //Write a data byte
#define wMark $0200 //Write a mark byte
#define wCRC $0400 //Write a 2-byte CRC (1 access does both)
#define wIWMConfig (wCRC) //Set IWM configuration
#define wParams $0600 //Set the 16 parameter registers
#define wPhase $0800 //Set phase lines states and directions
#define wSetup $0A00 //Set the current configuration
#define wZeroes $0C00 //Mode reg: 1's clr bits, 0's=don't care
#define wOnes $0E00 //Mode reg: 1's set bits, 0's=don't care
#define rData $1000 //Read a data byte
#define rCorrection (rData) //Read the correction factor
#define rMark $1200 //Read a mark byte
#define rError $1400 //Error register
#define rParams $1600 //Parameters (16 bytes deep at this addr)
#define rPhase $1800 //Phase lines states and directions
#define rSetup $1A00 //Read the current configuration
#define rStatus $1C00 //Status (returns current mode reg value)
#define rHandshake $1E00 //Handshake register
//---------------------------------------------------
// 8530 SCC Offsets
//---------------------------------------------------
#define aData 6 // offset for A channel data
#define aCtl 2 // offset for A channel control
#define bData 4 // offset for B channel data
#define bCtl 0 // offset for B channel control
#define sccData 4 // general offset for data from control
#define rxBF 0 // SCC receive buffer full
#define txBE 2 // SCC transmit buffer empty
#define RxCA 0 // Receive Character Available
//---------------------------------------------------
// 53C80 SCSI Register Defs, Offsets
//---------------------------------------------------
#define sCDR $00 // Current SCSI Read Data
#define sODR $00 // Output data register
#define sICR $10 // Initiator Command Register - READ/WRITE
#define iRST $80 // *RST asserted
#define iAIP $40 // arbitration in progress (read)
#define bAIP 6 // bit test for arbitration in progress
#define aTMD $40 // assert Test Mode (write)
#define iLA $20 // Lost arbitration (read)
#define bLA 5 // bit test for Lost Arbitration
#define aDIFF $20 // assert Differential enable (write)
#define iACK $10 // *ACK is asserted
#define iBSY $08 // *BSY is asserted
#define iSEL $04 // *SEL is asserted
#define iATN $02 // *ATN is asserted
#define iDB $01 // Data bus is asserted
#define sMR $20 // Mode Register - READ/WRITE
#define iBDMA $80 // Block Mode DMA
#define iTGT $40 // Target Mode
#define iPTY $20 // Enable Parity Checking
#define iIPTY $10 // Enable Parity interrupt
#define iIEOP $08 // Enable EOP interrupt
#define iMBSY $04 // Monitor BSY
#define iDMA $02 // DMA Mode
#define iARB $01 // Arbitration
#define sTCR $30 // Target Command Register - READ/WRITE
#define iREQ $08 // Assert *REQ
#define iMSG $04 // Assert *MSG
#define iCD $02 // Assert C/*D
#define iIO $01 // Assert I/*O
#define sCSR $40 // Current SCSI Bus Status (READ)
#define aRST $80 // *RST
#define aBSY $40 // *BSY
#define bBSY 6 // bit test for *BSY
#define aREQ $20 // *REQ
#define bREQ 5 // bit test for *REQ
#define aMSG $10 // *MSG
#define bMSG 4 // bit test for *MSG
#define aCD $08 // C/*D
#define bCD 3 // bit test for C/*D
#define aIO $04 // I/*O
#define bIO 2 // bit test for I/*O
#define aSEL $02 // *SEL
#define bSEL 1 // bit test for *SEL
#define aDBP $01 // *DBP
#define sSER $40 // Select Enable Register (WRITE)
#define sBSR $50 // Bus & Status Register (READ)
#define iEDMA $80 // End of DMA
#define bEDMA 7 // bit test for end of DMA
#define iDMAR $40 // DMA Request
#define bDMAR 6 // bit test for DMA Req
#define iPERR $20 // Parity Error
#define iIREQ $10 // Interrupt Request
#define bIREQ 4 // bit test for interrupt
#define iPM $08 // Phase Match
#define bPM 3 // bit test for Phase Match
#define iBERR $04 // Bus Error
#define ATN $02 // *ATN
#define ACK $01 // *ACK
#define bACK 0 // bit test for ACK
#define sDMAtx $50 // DMA Transmit Start (WRITE)
#define sIDR $60 // Data input register (READ)
#define sTDMArx $60 // Start Target DMA receive (WRITE)
#define sRESET $70 // Reset Parity/Interrupt (READ)
#define sIDMArx $70 // Start Initiator DMA receive (WRITE)
//---------------------------------------------------
// SCSI DMA chip register offsets
//---------------------------------------------------
// Note that the 53C80 registers are provided on the SCSI DMA chip. The registers
// described here are in addition to the 53C80 registers.
#define sDCTRL $80
#define bDMAEN 0 // bit to enable SCSI DMA
#define iDMAEN $0001 // mask to enable SCSI DMA
#define bINTREN 1 // bit to enable SCSI DMA interrupts
#define iINTREN $0002 // mask to enable SCSI DMA interrupts
#define bTIMEEN 2 // bit to enable watchdog timer intr's
#define iTIMEEN $0004 // mask to enable watchdog timer intr's
#define bHSKEN 3 // bit to enable hardware-handshaking (write)
#define iHSKEN $0008 // mask to enable hardware-handshaking (write)
#define bRESET 4 // bit to reset SCSI DMA chip (write)
#define iRESET $0010 // mask to reset SCSI DMA chip (write)
#define bFIFO 4 // bit indicating bytes left in FIFO (read)
#define iFIFO $0010 // mask indicating bytes left in FIFO (read)
#define bTEST 5 // bit to enable SCSI Test Mode (write)
#define iTEST $0020 // mask to enable SCSI Test Mode (write)
#define bSCSIP 6 // bit indicating SCSI intr pending (read)
#define iSCSIP $0040 // mask indicating SCSI intr pending (read)
#define bTIMEP 7 // bit indicating timer intr pending (read)
#define iTIMEP $0080 // mask indicating timer intr pending (read)
#define bDMABERR 8 // bit indicating DMA bus error (read)
#define iDMABERR $0100 // mask indicating DMA bus error (read)
#define iARBID $0E00 // mask to get target ID for arbitration
#define bARBIDEN 12 // bit to enable hardware arbitration
#define iARBIDEN $1000 // mask to enable hardware arbitration
#define bWONARB 13 // bit indicating successful arbitration
#define iWONARB $2000 // mask indicating successful arbitration
#define iINFIFO $C000 // mask to get bytes left in FIFO (read)
#define sDCNT $C0
#define sDADDR $100
#define sDTIME $140
#define sTEST $180
//__________________________________________________________________________________________
//
//
// Chip Offsets - Register offsets for "non standard" Mac chips. This includes the following:
// OSS and IOP.
//
//
//__________________________________________________________________________________________
//---------------------------------------------------
// OSS (Operating System Support) Chip Address & Offsets
//---------------------------------------------------
#define OSSMskFirst $000 //offset to first interrupt mask register
#define OSSMskSlot9 (OSSMskFirst) //offset to slot 9 interrupt mask register
#define OSSMskSlotA $001 //offset to slot A interrupt mask register
#define OSSMskSlotB $002 //offset to slot B interrupt mask register
#define OSSMskSlotC $003 //offset to slot C interrupt mask register
#define OSSMskSlotD $004 //offset to slot D interrupt mask register
#define OSSMskSlotE $005 //offset to slot E interrupt mask register
#define OSSMskPSwm $006 //offset to SWIM PIC interrupt mask register
#define OSSMskPScc $007 //offset to SCC PIC interrupt mask register
#define OSSMskSnd $008 //offset to Sound interrupt mask register
#define OSSMskScsi $009 //offset to SCSI interrupt mask register
#define OSSMsk60Hz $00A //offset to 60 Hz interrupt mask register
#define OSSMskVia1 $00B //offset to VIA1 interrupt mask register
#define OSSMskRTC $00C //offset to RTC interrupt mask register
#define OSSMskADB $00D //offset to ADB interrupt mask register (not used) <5.1>
#define OSSMskRPU $00E //offset to RPU interrupt mask register <4.8>
#define OSSMskLast (OSSMskRPU) //offset to last interrupt mask register
#define rpuReset $010 // RPU write offset to reset serial ptr <4.9>
#define OSSIntStat $202 //offset to interrupt status register. Bits are: <3.7>
// 15: interrupt 15 (spare) pending
// 14: interrupt 14 (RPU) pending <4.8>
// 13: interrupt 13 (spare) pending <5.1>
// 12: interrupt 12 (RTC) pending
// 11: interrupt 11 (VIA1) pending
// 10: interrupt 10 (60 Hz) pending
// 9: interrupt 9 (SCSI) pending
// 8: interrupt 8 (sound) pending
// 7: interrupt 7 (SCC PIC) pending
// 6: interrupt 6 (SWIM PIC) pending
// 5: interrupt 5 (slot E) pending
// 4: interrupt 4 (slot D) pending
// 3: interrupt 3 (slot C) pending
// 2: interrupt 2 (slot B) pending
// 1: interrupt 1 (slot A) pending
// 0: interrupt 0 (slot 9) pending
//••••• NOTE: In the new OSS, the interrupt status register is a long word starting at $200. <3.7>
//••••• Since only the low-order word is currently used, making a single change here <3.7>
//••••• has less impact on the ROM sources. When we permanently switch over to the <3.7>
//••••• new OSS hardware, then it may make sense to fix this equate and change all its <3.7>
//••••• uses from MOVE.Ws to MOVE.Ls. <3.7>
#define OSSRomCntl $204 //offset to ROM control register. Bits are:
// <to be specified - see Steve Ray's spec> <2.0>
#define OSSPwrOff (OSSRomCntl) //power off is now a bit in the ROM control register <5.1>
#define OSSPwrOffBit 7 // 7: write a 1 here to power off the machine <2.1><3.7>
#define OSSCntrCntl $205 //offset to counter control register. Bits are
// 7-2: unused
// 1: test control. A 1 causes each 4 bit
// counter segment to count in parallel
// 0: counter hold. A 1 holds current value
// so all 64 bits can be read. Hold doesn't
// affect counting, though!
#define OSSInpStat $206 //offset to input status register. Bits are
// 7-2: not used, read as zero
// 1: SCC write request. Not used if PIC present
// 0: mini-phono device plugged in flag. A 1
// means a device IS plugged in.
#define OSS60HzAck $207 //offset to 'Clear 60 Hz interrupt flag' register. Both <3.7>
// writes and reads clear it, so might as well write it.
#define OSSCounter $208 //offset to 64 bit counter register. Low order 8
//.bits are always read as zero (maybe not in future...)
// Bit numbers in OSS interrupt status register
#define OSSIntIOPSWIM 6 //bit # of SWIM IOP in interrupt status register
#define OSSIntIOPSCC 7 //bit # of SCC IOP in interrupt status register
#define OSSIntSound 8 //bit # of ASC in interrupt status register
#define OSSIntSCSI 9 //bit # of SCSI in interrupt status register
#define OSSIntVBL60Hz 10 //bit # of 60Hz VBL in interrupt status register
#define OSSIntVia1 11 //bit # of VIA 1 in interrupt status register
#define OSSIntRTC 12 //bit # of RTC in interrupt status register
#define OSSIntADB 13 //bit # of ADB in interrupt status register
#define OSSIntRPU 14 //bit # of RPU in interrupt status register <4.8>
#define OSSIntLast 14 //bit # of last interrupt source
#define OSSRomInit $D // initial value for ROM control register<3.5>
//---------------------------------------------------
// IOP (Input Output Processor) Chip Offsets and bit definitions
//---------------------------------------------------
#define iopRamAddrH ($0000-$20) // high byte of shared RAM address register
#define iopRamAddrL ($0002-$20) // low byte of shared RAM address register
#define iopRamAddr (iopRamAddrL-1) // WORD access to shared RAM address register
#define iopRamData ($0008-$20) // shared RAM data register (byte, word, or long)
#define iopStatCtl ($0004-$20) // IOP Status and Control register
// bit numbers within the iopStatCtl register
#define iopInBypassMode 0 // IOP is in BYPASS mode
#define iopIncEnable 1 // enable addr pointer increment
#define iopRun 2 // 0 -> reset IOP, 1 -> run IOP
#define iopGenInterrupt 3 // interrupt the IOP
#define iopInt0Active 4 // interrupt 0 active
#define iopInt1Active 5 // interrupt 1 active
#define iopBypassIntReq 6 // peripheral chip interrupt request in bypass mode
#define iopSCCWrReq 7 // 0 -> SCC REQ active, 1 -> inactive
// commands bytes to write to the iopStatCtl register
#define setIopIncEnable ((1<<iopIncEnable)|(1<<iopRun))
#define clrIopIncEnable ((0<<iopIncEnable)|(1<<iopRun))
#define clrIopInt0 ((1<<iopInt0Active)|(1<<iopRun)|(1<<iopIncEnable))
#define clrIopInt1 ((1<<iopInt1Active)|(1<<iopRun)|(1<<iopIncEnable))
#define setIopGenInt ((1<<iopGenInterrupt)|(1<<iopRun)|(1<<iopIncEnable))
#define resetIopRun ((0<<iopRun)|(1<<iopInt0Active)|(1<<iopInt1Active)|(1<<iopIncEnable))
#define setIopRun ((1<<iopRun)|(1<<iopInt0Active)|(1<<iopInt1Active)|(1<<iopIncEnable))
//__________________________________________________________________________________________
//
//
// VIA1 or Equivalent Pin Definitions and Register Offsets - Multiple names for the same pin
// are grouped together. New definitions for VIA1 pins are added such that the grouping is
// maintained.
//
//
//__________________________________________________________________________________________
//---------------------------------------------------
// 6522 VIA1 (and VIA2) register offsets
//---------------------------------------------------
#define vBufB 0 // BUFFER B
#define vBufAH $200 // buffer a (with handshake) [ Dont use! ]
#define vDIRB $400 // DIRECTION B
#define vDIRA $600 // DIRECTION A
#define vT1C $800 // TIMER 1 COUNTER (L.O.)
#define vT1CH $A00 // timer 1 counter (high order)
#define vT1L $C00 // TIMER 1 LATCH (L.O.)
#define vT1LH $E00 // timer 1 latch (high order)
#define vT2C $1000 // TIMER 2 LATCH (L.O.)
#define vT2CH $1200 // timer 2 counter (high order)
#define vSR $1400 // SHIFT REGISTER
#define vACR $1600 // AUX. CONTROL REG.
#define vPCR $1800 // PERIPH. CONTROL REG.
#define vIFR $1A00 // INT. FLAG REG.
#define vIER $1C00 // INT. ENABLE REG.
#define vBufA $1E00 // BUFFER A
#define vBufD (vBufA) // disk head select is buffer A <3.5>
//---------------------------------------------------
// VIA IFR/IER bits
//---------------------------------------------------
#define ifCA2 0 // CA2 interrupt
#define ifCA1 1 // CA1 interrupt
#define ifSR 2 // SR shift register done
#define ifCB2 3 // CB2 interrupt
#define ifCB1 4 // CB1 interrupt
#define ifT2 5 // T2 timer2 interrupt
#define ifT1 6 // T1 timer1 interrupt
#define ifIRQ 7 // any interrupt
//---------------------------------------------------
// VIA1 Port A definitions
//---------------------------------------------------
#define vSound $7 // sound volume bits (0..2) (output)
#define vTestJ 0 // Burn In Test jumper (input)
#define vCpuId0 1 // CPU Identification bit 0 (input)
#define vCpuId1 2 // CPU Identification bit 1 (input)
#define vSync 3 // Synchronous modem
#define vOverlay 4 // overlay bit (overlay when 1)
#define vCpuId2 4 // CPU Identification bit 2
#define vReqAEnable 4 // enable ReqA into vSCCWrReq (PSC only) <LW2>
#define vHeadSel 5 // head select line for Sony
#define vCpuId3 6 // CPU Identification bit 3
#define vRev8Bd 6 // =0 for rev 8 board>
#define vReqBEnable 6 // enable ReqB into vSCCWrReq (PSC only) <LW2>
#define vSCCWrReq 7 // SCC write/request line
//---------------------------------------------------
// VIA1 Port B definitions
//---------------------------------------------------
#define vEclipseLED 0 // flashable Eclipse LED (how quaint!) <23>
#define vRTCData 0 // real time clock data
#define vRMP0 0 // Reserved for RMP (PSC only)
#define vRTCClk 1 // real time clock clock pulses
#define vRMP1 1 // Reserved for RMP (PSC only)
#define vRTCEnb 2 // clock enable (0 for enable)
#define vRMP2 2 // Reserved for RMP (PSC only)
#define vFDBInt 3 // Front Desk bus interrupt
#define vXcvrsesbit 3 // Egret transceiver session bit <6>
#define vSDMCable 3 // SCSI DiskMode cable sense for Dartanian <H15>
#define vCudaTREQ 3 // Cuda transaction request input <P2><SM4> rb
#define vSDMDiskID 4 // DiskMode HD ID (bits 4-6) for Dartanian <H15>
#define vFDesk1 4 // Front Desk bus state bit 0
#define vViafullbit 4 // Egret via full bit <6>
#define vCudaBYTEACK 4 // Cuda byte acknowledge output <P2><SM4> rb
#define vFDesk2 5 // Front Desk bus state bit 1
#define vSyssesbit 5 // Egret system session bit <6><SM4> rb
#define vCudaTIP 5 // Cuda interface transaction in progress output <P2>
#define vAUXIntEnb 6 // switch to A/UX interrupt scheme (output) <23>
#define vPGCEnb 6 // Parity Generator/Checker enable (0 for enable)
#define vJMPDude6 6 // Reserved for JMP (PSC only)
#define vPGCErr 7 // Parity Generator/Checker error (input)
#define vSndEnb 7 // /sound enable (reset when 1) (output)
#define vSWInt 7 // cause a software interrupt (output) <23>
#define vJMPDude7 7 // Reserved for JMP (PSC only)
//__________________________________________________________________________________________
//
//
// VIA2 or Equivalent Pin Definitions and Register Offsets - Multiple names for the same pin
// are grouped together. New definitions for VIA2 pins are added such that the grouping is
// maintained.
//
//
//__________________________________________________________________________________________
//---------------------------------------------------
// VIA2 Port A definitions
//---------------------------------------------------
#define v2IRQ1 0 // slot 1 interrupt
#define v2EnetIRQ 0 // on-board ethernet <8><23>
#define v2IRQ2 1 // slot 2 interrupt
#define v2IRQ3 2 // slot 3 interrupt
#define v2IRQ4 3 // slot 4 interrupt
#define v2IRQ5 4 // slot 5 interrupt
#define v2IRQ6 5 // slot 6 interrupt
#define v2RAM0 6 // RAM size bit 0
#define v2LCDIRQ 6 // on-board LCD video
#define v2VideoIRQ 6 // on-board video <8><23>
#define v2RAM1 7 // RAM size bit 1
#define v2CardIn 7 // on-board video
#define v2SyncOnGreen 7 // for enabling/disabling Sync-on-Green (DAFB) <T20>
//---------------------------------------------------
// VIA2 Port B definitions
//---------------------------------------------------
#define v2ConfigLE 0 // DFAC config latch enable <T8>
#define v2CDis 0 // cache disable (when 1) <3.3>
#define v2Keyswitch 0 // 900/950 ONLY - keyswitch shadow bit (1=SECURE)<T14><T17><SM4> rb
#define v2BusLk 1 // Bus lockout
#define v2PMack 1 // Power manager handshake acknowledge
#define v2PowerOff 2 // soft power off signal (when 0)
// (also 900/950 keyswitch OFF bit) <T17><SM4> rb
#define v2PMreq 2 // Power manager handshake request
#define v2ConfigData 3 // DFAC config data <T8>
#define v2FC3 3 // PMMU FC3 indicator
#define vFC3 3 // PMMU FC3 indicator
#define v2SndInSel0 3 // Eclipse only - sound input select bit 0 <t19><H17>
#define v2ConfigClk 4 // DFAC config clock <T8>
#define v2TM1A 4 // bit for NUBus
#define v2TM0A 5 // and another
#define v2Speed 5 // 25/33 Mhz 68040 input (0=25MHz, 1=33 MHz)
#define v2MicCtl 5 // microphone control on Wombats <H17><SM4> rb
#define v2HMMU 5 // HMMU 24/32 <15> HJR
#define v2CDis2 6 // On Tim the CDIS is on pb6 <15> HJR
#define v2SndExt 6 // 1 = internal speaker, 0 = ext. audio
#define v2SndInSel1 6 // Q900/950 only - sound input select bit 1 <t19><SM4> rb
#define v2VBL 7 // pseudo VBL signal
#define v2ModemRST 7 // Modem.Reset <15> HJR
// temporary Cyclone equates <SM4> rb, start, <SM5> rb
// <SM7> rb,TEMP EQUATES
#define CycloneEVT1Reg $A55A2800 // id which identifies an EVT1 cyclone in CPURegID <SM9> rb
#define PSCVIA2SIntEVT1 $000 // Slot interrupt reg. offset <SM9> rb
#define PSCVIA2IFREVT1 $004 // VIA2 interrupt flag reg. offset <SM9> rb
#define PSCVIA2IEREVT1 $008 // VIA2 interrupt enable reg. offset <SM9> rb
#define PSCVIA2SInt $1E00 // Slot interrupt reg. offset <SM7> rb
#define PSCVIA2IFR $1A00 // VIA2 interrupt flag reg. offset <SM7> rb
#define PSCVIA2IER $1C00 // VIA2 interrupt enable reg. offset <SM7> rb
// PSC VIA2 Slot Interrupt Register equates
#define PSCSlotC 3 // slot C int.
#define PSCSlotD 4 // slot D int.
#define PSCSlotE 5 // slot E int.
#define PSCOVBVBL 6 // on-board video vbl int.
// PSC VIA2 Interrupt Flag and Interrupt Enable Registers equates
#define PSCSCSI0 0 // SCSI int., same as bit 3
#define PSCSlot 1 // any slot int.
#define PSCMUNI 2 // MUNI int.
#define PSCSCSI3 3 // SCSI int.
#define PSCFDC 5 // floppy int.
#define PSCSNDFRM 6 // sound frame int.
#define PSCANY 7 // any of the above
// <SM4> rb, end, <SM5> rb
//----------
//RBV (Ram Based Video) register definitions
//----------
#define RvDataB $000 // VIA2 data reg. B equivalent <v1.4><2.5>
#define RvExp $001 // RBV Expansion Register <3>
#define RvSInt $002 // Slot interrupts reg. <v1.4><2.5>
#define RvIFR $003 // interrupt flag reg. <v1.4><2.5>
#define RvMonP $010 // monitor parameters reg. <v1.4><2.5>
#define RvChpT $011 // chip test reg. <v1.4><2.5>
#define RvSEnb $012 // Slot interrupt enable reg. <v1.4><2.5>
#define RvIER $013 // interrupt flag enable reg. <v1.4><2.5>
//----------
//Common Via 2 and RBV (Ram Based Video) register offsets
//----------
#define Rv2DataB (vBufB|RvDataB) // RBV/VIA2 data reg. B equivalent <H8>
#define Rv2Exp (RvExp) // RBV Expansion Register <H8>
#define Rv2SInt (RvSInt) // Slot interrupts reg. <H8>
#define Rv2IFR (vIFR|RvIFR) // RBV/VIA2 interrupt flag reg. <H8>
#define Rv2MonP (RvMonP) // monitor parameters reg. <H8>
#define Rv2ChpT (RvChpT) // chip test reg. <H8>
#define Rv2SEnb (RvSEnb) // Slot interrupt enable reg. <H8>
#define Rv2IER (vIER|RvIER) // iRBV/VIA2 interrupt enable reg. <H8>
// ====== VIA2 BufferB Equivalent Address: $50026000 ===== <v1.4>
#define RvCDis 0 // cache disable (when 1) <v1.4><3.3>
#define RvBusLk 1 // Bus lockout <v1.4>
#define RvPowerOff 2 // soft power off signal (when 0) <v1.4>
#define RvCFlush 3 // Flush external cache (when 0) <v1.4>
#define RvTM1A 4 // bit for NUBus <v1.4>
#define RvTM0A 5 // and another <v1.4>
#define RvSndExt 6 // 1 = internal speaker, 0 = ext. audio <v1.4>
// jack in use <v1.4>
#define RvPGCTest 7 // 1 = generate good parity, 0 = generate errors
// ====== Future Expansion Address: $50026001 ===== <v1.4>
// ====== Slot Interrupts Address: $50026002 ===== <v1.4>
#define RvIRQ1 0 // slot 1 interrupt <v1.4>
#define RvIRQ2 1 // slot 2 interrupt <v1.4>
#define RvIRQ3 2 // slot 3 interrupt <v1.4>
#define RvIRQ4 3 // slot 4 interrupt <v1.4>
#define RvIRQ5 4 // slot 5 interrupt <v1.4>
#define RvIRQ6 5 // slot 6 interrupt <v1.4>
#define RvIRQ0 6 // slot 0 interrupt or internal video <v1.4>
// blanking interrupt <v1.4>
//RvResr EQU 7 ; reserved <v1.4>
// ====== Interrupt Flags Address: $50026003 ===== <v1.4>
#define RvSCSIDRQ 0 // 1 = SCSI DRQ interrupt <v1.4>
#define RvAnySlot 1 // 1 = any slot(0-6).IRQ int <v1.4>
#define RvExpIRQ 2 // 1 = expansion int. (reserved) <v1.4>
#define RvSCSIRQ 3 // 1 = SCSI IRQ interrupt <v1.4>
#define RvSndIRQ 4 // 1 = Apple Sound Chip interrup <v1.4>
//RvResr EQU 5 ; reserved <v1.4>
//RvResr EQU 6 ; reserved <v1.4>
//RvSetClr EQU 7 ; on READ, 1 = any enable interrupt <v1.4>
// on WRITE, 1 = 1-bits in bits 0-6 write 1's<v1.4>
// 0 = 1-bits in bits 0-6 write 0's<v1.4>
// ====== Monitor Parameters Address: $50026010 ===== <v1.4>
#define RvColor1 0 // (lsb) R/W 000 = 1bit, 001 = 2 bit <v1.4>
#define RvColor2 1 // R/W 010 = 4bit, 011 = 8 bit <v1.4>
#define RvColor3 2 // (msb) Read 1xx = Reserved <v1.4>
#define RvMonID1 3 // READ 000,011,100=reserved; x01=15" monitor<v1.4>
#define RvMonID2 4 // 010=Mod'IIGSmonitor;110=MacII monitors <v1.4>
#define RvMonID3 5 // 111= 9" build in monitor <v1.4>
#define RvVIDOff 6 // 1 = Video off <v1.4>
#define RvVID3St 7 // 1 = all video outputs tri-stated <v1.4>
// ====== Chip Test Address: $50026011 ===== <v1.4>
#define RvC60 0 // 1 = C60 clock run 128 x normal <v1.4>
#define RvSpd1 1 // (lsb) 00 = normal, 01=medium <v1.4>
#define RvSpd2 2 // (msb) 10 = fast, 11 = very fast <v1.4>
#define RvHndShk3 3 // 1=VID.REQ & VID.RES tri-stated <v1.4>
#define RvIOClk3 4 // 1=C16M, C8M, C3.7M tri-stated <v1.4>
#define RvC30M 5 // 1=30.24 mHz clock for all monitors <v1.4>
#define RvSDTClk 6 // 1 = Dot clock halted <v1.4>
#define RvTstRes 7 // 1 = reset video counters <v1.4>
// ====== Slot Interrupts Enable Address: $50026012 ===== <v1.4>
#define RvIRQ1En 0 // slot 1 interrupt enabled <v1.4>
#define RvIRQ2En 1 // slot 2 interrupt enabled <v1.4>
#define RvIRQ3En 2 // slot 3 interrupt enabled <v1.4>
#define RvIRQ4En 3 // slot 4 interrupt enabled <v1.4>
#define RvIRQ5En 4 // slot 5 interrupt enabled <v1.4>
#define RvIRQ6En 5 // slot 6 interrupt enabled <v1.4>
#define RvIRQ0En 6 // slot 0 interrupt or internal video enabled<v1.4>
//RvSetClr EQU 7 ; on READs, always reads 0 <v1.4>
// on WRITEs, 1 = 1-bits in bits 0-6 write 1's<v1.4>
// 0 = 1-bits in bits 0-6 write 0's<v1.4>
// ====== Interrupt Flags Enable Address: $50026013 =====
#define RvSCSIDRQEn 0 // 1 = SCSI DRQ interrupt enabled <v1.4>
#define RvAnySlotEn 1 // 1 = any slot(0-6).IRQ int. enabled <v1.4>
#define RvExpIRQEn 2 // 1 = expansion int. (reserved) enabled <v1.4>
#define RvSCSIRQEn 3 // 1 = SCSI IRQ interrupt enabled <v1.4>
#define RvSndIRQEn 4 // 1 = Apple Sound Chip interrupt enabled <v1.4>
//RvResr EQU 5 ; reserved <v1.4>
//RvResr EQU 6 ; reserved <v1.4>
//RvSetClr EQU 7 ; on READs, always reads 1 <v1.4>
// on WRITEs, 1 = 1-bits in bits 0-6 write 1's<v1.4>
// 0 = 1-bits in bits 0-6 write 0's<v1.4>
//----------
// VDAC register definitions
//----------
#define vDACwAddReg $0000 // offset from vDACBase for write address reg
#define vDACrAddReg $000C // offset from vDACBase for read address register <v4.2>
#define vDACwDataReg $0004 // offset from vDACBase for write data reg
#define vDACPixRdMask $0008 // offset from vDACBase for pixel mask
//__________________________________________________________________________________________
//
//
// VISA Pin Definitions and Register Offsets - Multiple names for the same pin are grouped
// together. New definitions for VISA pins are added such that the grouping is maintained.
//
//
//__________________________________________________________________________________________
//----------
// VISA register definitions - generally, these equates are a precise subset
// of the RBV equates.
//----------
// these registers are accessed off of VIA1 lomem
#define VsData1A $1E00 // VIA1 data reg A
#define VsData1B $0000 // VIA1 data reg B
// these registers are accessed off of VISA lomem
#define VsData2B $000 // VIA2 data reg B equivalent
#define VsExp $001 // VISA Expansion Register
#define VsSInt $002 // Slot Interrupt Register
#define VsIFR $003 // Interrupt Flag Register
#define VsMonP $010 // Monitor Parameters Register
#define VsSEnb $012 // Slot Interrupt Enable Register
#define VsIER $013 // Interrupt Flag Enable Register
// ====== VIA2 BufferB Equivalent Address: $50026000 =====
//*VsResr EQU 0 ; reserved
//*VsResr EQU 1 ; reserved
//*VsResr EQU 2 ; reserved
#define VsFC3 3 // select 32-bit map. 0=24 bit, 1=32 bit
//*VsResr EQU 4 ; reserved
//*VsResr EQU 5 ; reserved
#define VsSndExt 6 // Always reads as 1 - play sounds in Mono
//*VsResr EQU 7 ; reserved
// ====== Future Expansion Address: $50026001 =====
#define VsA2Mode 0 // 0=512*384 mode, 1=560*384 mode
#define VsVResEn 1 // 1=enable vertical counter reset for video genlock
#define VsFlWrEn 2 // 1=enable writes to flash EEPROM
#define Vs1BV 3 // 1=low base for 1-bit mode, 0=high base
#define VsPg2 4 // 1=main video page, 0=sec video page
//*VsResr EQU 5 ; reserved
#define VsSiz0 6 // RAM size control bit 00=1MB, 01=1.5MB
#define VsSiz1 7 // 10=3MB,11=9MB
// ====== Slot Interrupts Address: $50026002 =====
//*VsResr EQU 0 ; reserved
//*VsResr EQU 1 ; reserved
//*VsResr EQU 2 ; reserved
//*VsResr EQU 3 ; reserved
//*VsResr EQU 4 ; reserved
#define VsSIRQ 5 // expansion slot interrupt
#define VsVBLInt 6 // slot zero (built-in) VBL interrupt
//*VsResr EQU 7 ; reserved
// ====== Interrupt Flags Address: $50026003 =====
#define VsSCSIDRQ 0 // 1 = SCSI DRQ interrup
#define VsAnySlot 1 // 1 = any slot(0-6).IRQ int
//*VsResr EQU 2 ; reserved
#define VsSCSIRQ 3 // 1 = SCSI IRQ interrupt
#define VsSndIRQ 4 // 1 = Apple Sound Chip interrupt
//RvResr EQU 5 ; reserved
//RvResr EQU 6 ; reserved
#define RvSetClr 7 // on READ, 1 = any enabled interrupt
// on WRITE, 1 = 1-bits in bits 0-6 write 1's
// 0 = 1-bits in bits 0-6 write 0's
// ====== Monitor Parameters Address: $50026010 =====
//*VsResr EQU 0 ; (lsb)
#define VsColor 1 // (compat w/RBV) R/W 000 = 1bit, R/W 010 = 4bit
//*VsResr EQU 2 ; (msb)
#define VsMonConn 3 // (lsb)1=no monitor connected
//*VsResr EQU 4 ; (compat w/RBV)
#define VsMonSel 5 // (msb) Monitor select 1=Jersey, 0=Rubik
//*VsResr EQU 6 ; reserved
//*VsResr EQU 7 ; reserved
// ====== Slot Interrupts Enable Address: $50026012 =====
//*VsResr EQU 0 ; reserved
//*VsResr EQU 1 ; reserved
//*VsResr EQU 2 ; reserved
//*VsResr EQU 3 ; reserved
//*VsResr EQU 4 ; reserved
#define VsExtIRQEn 5 // expansion slot interrupt enabled
#define VsIntIRQEn 6 // internal video interrupt enabled
#define VsSetClr 7 // on READs, always reads 0
// on WRITEs, 1 = 1-bits in bits 0-6 write 1's
// 0 = 1-bits in bits 0-6 write 0's
// ====== Interrupt Flags Enable Address: $50026013 =====
#define VsSCSIDRQEn 0 // 1 = SCSI DRQ interrupt enabled
#define VsAnySlotEn 1 // 1 = any slot(0-6).IRQ int. enabled
//*VsResr EQU 2 ; reserved
#define VsSCSIRQEn 3 // 1 = SCSI IRQ interrupt enabled
#define VsSndIRQEn 4 // 1 = Apple Sound Chip interrupt enabled
//VsResr EQU 5 ; reserved
//VsResr EQU 6 ; reserved
//RvSetClr EQU 7 ; on READs, always reads 1
// on WRITEs, 1 = 1-bits in bits 0-6 write 1's
// 0 = 1-bits in bits 0-6 write 0's
//----------
// V8 register definitions - generally compatible with the VISA equates above, but a few equates
// have changed names.
//----------
// these registers are accessed off of the V8 lomem
#define V8Exp $001 // V8 Expansion Register
#define V8SInt $002 // V8 Slot Interrupt Register
#define V8MonP $010 // Monitor Parameters Register
#define V8SEnb $012 // Slot Interrupt Enable Register
// ====== Future Expansion Address: $50F26001 =====
#define V8A2Mode 0 // 0=512*384 mode, 1=560*384 mode
#define V8512Row 1 // 1=V8 rowbytes is 256, 0=rowbytes is 512
#define V8vRAMIn 2 // 1=refresh video from vRAM, 0=refresh from dRAM
//*V8Resr EQU 3 ; no 1BV on V8
//*V8Resr EQU 4 ; no VP2 on V8
#define V8Siz0 5 // RAM size control bit 0
#define V8Siz1 6 // RAM size control bit 1
#define V8Siz2 7 // RAM size control bit 2
// ====== Monitor Parameters Address: $50F26010 =====
#define V8Col0 0 // Video depth control bit 0
#define V8Col1 1 // Video depth control bit 1
#define V8Col2 2 // Video depth control bit 2
#define V8MonID1 3 // Monitor sense ID bit 1
#define V8MonID2 4 // Monitor sense ID bit 2
#define V8MonID3 5 // Monitor sense ID bit 3
//*VsResr EQU 6 ; reserved
//*VsResr EQU 7 ; reserved
// ====== Slot Interrupts Enable Address: $50F26012 =====
//*V8Resr EQU 0 ; reserved
//*V8Resr EQU 1 ; reserved
//*V8Resr EQU 2 ; reserved
//*V8Resr EQU 3 ; reserved
//*V8Resr EQU 4 ; reserved
#define V8ExtIRQEn 5 // expansion slot interrupt enabled
#define V8IntIRQEn 6 // internal video interrupt enabled
//*V8Resr EQU 7 ; reserved
//----------
// Elsie VDAC register definitions
//----------
// VISA/Bt450 registers
#define VsDACwAddReg $0000 // offset from vDACBase for write address reg
#define VsDACwDataReg $0001 // offset from vDACBase for write data reg
// V8/Ariel registers
#define V8DACrAddReg $0000 // offset for read address reg
#define V8DACwAddReg $0000 // offset for write address reg
#define V8DACrDataReg $0001 // offset for read data reg
#define V8DACwDataReg $0001 // offset for write data reg
#define V8DACrCntlReg $0002 // offset for read control reg
#define V8DACwCntlReg $0002 // offset for write control reg
#define V8DACrKeyReg $0003 // offset for read key color reg
#define V8DACwKeyReg $0003 // offset for write key color reg
#define V8vRAMBase $50F40000 // base address of V8 VRAM, if present
// End of VISA changes <4> <cv>
//----------
// DAFB register definitions (offsets from DAFBBase in ProductInfo) ($F980 0000)
//----------
#define DAFB_BaseOffset $0 // DAFB offset from DAFBBase
#define DAFB_ParmSize $5 // size of DAFB programmed subset
#define DAFB_NumRegs ((16-4)) // Number of DAFB registers (Color Regs are really vRAM).
#define DAFB_VidBaseHi $0 // DAFB video base address, bits 20:9
#define DAFB_VidBaseLo $4 // DAFB video base address, bits 8:5 (4:0 always zero)
#define DAFB_RowWords $8 // DAFB rowlongs size
#define DAFB_ClkCfg $C // DAFB clock configuration
#define DAFB_Config $10 // DAFB general configuration
#define DAFB_BlkWrtEn $14 // DAFB block write enable
#define DAFB_PgMdEn $18 // DAFB page mode enable
#define DAFB_Sense $1C // DAFB sense line
#define DAFB_Reset $20 // DAFB reset control
#define DAFB_SCSIch0 $24 // Turbo SCSI channel 0 control (not used)
#define DAFB_SCSIch1 $28 // Turbo SCSI channel 1 control (not used)
#define DAFB_Test $2C // DAFB test control
#define DAFB_CRB0 $30 // vRAM Color Register, bank 0
#define DAFB_CRB1 $34 // vRAM Color Register, bank 1
#define DAFB_CRB2 $38 // vRAM Color Register, bank 2
#define DAFB_CRB3 $3C // vRAM Color Register, bank 3
//----------
// Swatch (in DAFB) register definitions (offsets from DAFBBase in ProductInfo)
//----------
#define Swatch_BaseOffset $100 // Swatch offset from DAFBBase
#define Swatch_BaseOffset1 $124 // parameter offset
#define Swatch_ParmSize1 $12 // size of Swatch parameter list
#define Swatch_NumRegs 30 // Number of Swatch registers.
#define Swatch_Mode $100 // Swatch general control
#define Swatch_IntMsk $104 // Swatch interrupt control
#define Swatch_IntStat $108 // Swatch interrupt status
#define Swatch_ClrCrsrInt $10C // Swatch clear cursor interrupt (not used in this form)
#define Swatch_ClrAnimInt $110 // Swatch clear animation interrupt (not used in this form)
#define Swatch_ClrVBLInt $114 // Swatch clear VBL interrupt (not used in this form)
#define Swatch_CrsrLine $118 // Swatch cursor interrupt trigger line
#define Swatch_AnimLine $11C // Swatch animation interrupt trigger line
#define Swatch_Test $120 // Swatch counter test
#define Swatch_HSyncRegs $124 // Swatch horizontal sync registers (set as a group)
#define Swatch_HSerr $124 // HSerr
#define Swatch_Hlfln $128 // Hlfln
#define Swatch_HEq $12C // HEq
#define Swatch_HSP $130 // HSP
#define Swatch_HBWay $134 // HBWay
#define Swatch_HBrst $138 // HBrst
#define Swatch_HBP $13C // HBP
#define Swatch_HAL $140 // HAL
#define Swatch_HFP $144 // HFP
#define Swatch_HPix $148 // HPix
#define Swatch_VSyncRegs $14C // Swatch vertical sync registers (set as a group)
#define Swatch_VHLine $14C // VHLine
#define Swatch_VSync $150 // VSync
#define Swatch_VBPEq $154 // VBPEq
#define Swatch_VBP $158 // VBP
#define Swatch_VAL $15C // VAL
#define Swatch_VFP $160 // VFP
#define Swatch_VFPEq $164 // VFPEq
#define Swatch_TimeAdj $168 // Swatch miscellaneous timing adjust
#define Swatch_ActLine $16C // Swatch active video line (read-only)
//----------
// ACDC register definitions (offsets from DAFBBase in ProductInfo, also in vDACBase)
//----------
#define ACDC_AddrReg $200 // set position in ACDC internal RAM
#define ACDC_DataReg $210 // read/write data in ACDC internal RAM
#define ACDC_ConfigReg $220 // ACDC offset from DAFBBase
#define ACDC_ParmSize $1 // size of ACDC parameter list
//----------
// National Clock Chip register definitions (offsets from DAFBBase in ProductInfo)
//----------
#define Clk_BaseOffset $300 // National offset from DAFBBase
#define Clk_ParmSize $10 // size of National parameter list
#define Clk_ParmSize1 $0A // (Once programmed, the last six bytes are always the same.)
//----------
// Misc. DAFB Parms
//----------
#define Misc_ParmSize $4 // Just for consistency with other DAFB parms.
//----------
// GSC register definitions (offsets from VDACAddr in ProductInfo) ($50F2 0000) <H5> jmp
//----------
#define GSCDeviceID $00 // Device revision register; read only.
#define GSCPanelID $01 // “Senseline” read/write register.
#define GSCPanelControl $02 // Switches r/w sense of PanelID reg.
#define GSCPanelSetup $03 // Panel intialization register.
#define GSCGrayScale $04 // The depth-switching register.
#define GSCPolyAdj $05 // Allows for grayscale adjustment.
#define GSCPanelAdj $06 // Allows for panel adjustment.
#define GSCACDClk $07 // Who knows?
#define GSCRefreshRate $08 // Refresh cycles per scanline.
#define GSCBlankShade $09 // Shade of gray for depth switches.
#define GSCPanelSkew $0A // Who knows?
#define GSCDiag0 $1D // Undocumented “diagnostic” registers.
#define GSCDiag1 $1E
#define GSCDiag2 $1F
//----------
// Sonora register definitions (offsets from SonoraAddr in ProductInfo) ($50F0 0000) <H4><H6>
//----------
#define SonoraVIA2Base $26000 // Base address of VIA2
#define SonoraVIA2Data $00 // VIA2 Data Register
#define SonoraRAMSize $01 // DRAM config
#define SonoraSlotIFR $02 // Slot Interrupt Flags Register
#define SonoraVIA2IFR $03 // VIA2 Interrupt Flags Register
#define SonoraVRAMSize $04 // VRAM config
#define SonoraSpeedReg $05 // System CPU Speed (waitstate) Register
#define SonoraSlotIER $12 // Slot Interrupt Enable Register
#define SonoraVIA2IER $13 // Interrupt Flag Register
#define SonoraVdCtlBase $28000 // Base address of video control registers
#define SonoraVdModeReg $00 // Monitor code and video blanking register
#define SonoraVdColrReg $01 // Framebuffer pixel depth control register
#define SonoraVdSenseRg $02 // Senseline register
// Bits for Misc Sonora Regs
//
#define SonoraSetClr 7 // on WRITEs, 1 = 1-bits in bits 0-6 write 1's
// 0 = 1-bits in bits 0-6 write 0's
// Bits for SonoraSlotIER
//
#define SonoraVBLIRQEn 6 // Enable/Disable built-in video VBL
//----------
// Ariel register definitions (offsets from VDACAddr in ProductInfo) ($50F2 4000) <H6>
//----------
#define ArielAddrReg 0 // Offset to r/w address register
#define ArielDataReg 1 // Offset to r/w data register
#define ArielConfigReg 2 // Offset to r/w control register
#define ArielKeyReg 3 // Offset to r/w key color register
//----------
// MMC register definitions (offsets from MMCAddr in ProductInfo) ($50F3 0400) <P2><SM4> rb, start
//----------
#define MMC_DRAMspeed0 $00 // DRAM timing register 0 [M0].
#define MMC_DRAMspeed1 $04 // DRAM timing register 1 [M1].
#define MMC_CPUspeed0 $08 // Clock speed 0 [M2].
#define MMC_CPUspeed1 $0C // Clock speed 1 [M3].
#define MMC_ROMspeed0 $10 // ROM cycle time 0 [M4].
#define MMC_ROMspeed1 $14 // ROM cycle time 1 [M5].
#define MMC_ROMspeed2 $18 // ROM cycle time 2 [M6].
#define MMC_DSPspeed $1C // DSP clock speed [M7].
#define MMC_DRAMwidth0 $20 // DRAM width 0 [M8].
#define MMC_DRAMwidth1 $24 // DRAM width 1 [M9].
#define MMC_DRAMwidth2 $28 // DRAM width 2 [M10].
#define MMC_DRAMwidth3 $2C // DRAM width 3 [M11].
#define MMC_EPROMmode $30 // EPROM mode [M12].
#define MMC_DRAMrange2 $34 // DRAM bank range 0 [M13].
#define MMC_DRAMrange1 $38 // DRAM bank range 1 [M14].
#define MMC_DRAMrange0 $3C // DRAM bank range 2 [M15].
#define MMC_CPUID0 $40 // CPU ID 0 [M16].
#define MMC_CPUID1 $44 // CPU ID 1 [M17].
#define MMC_ClockSelect $48 // Endeavor Input Clock Select (NTSC/PAL) [M18].
#define MMC_Bypass $4C // RGB or Composite bypass [M19].
//----------
// MUNI (NuBus) register definitions <P6>
//----------
// <SM7> rb, • TEMP for EVT1 ; <SM7> rb
#define MUNIBaseEVT1 $50F30800 // Base address of Muni for EVT1 <SM9> rb
#define MUNIBase $50F30000 // Base address of Muni. <SM7> rb
#define MUNI_IntCntrl $00 // Interrupt control register.
#define MUNI_IntStatus $04 // Interrupt status register.
#define MUNI_Control $08 // System control register.
#define MUNI_BlkAttmpt $0C // Block attempt register.
#define MUNI_Status $10 // Status register.
#define MUNI_Test $14 // Test control register.
//----------
// Civic register definitions (offsets from CivicAddr in ProductInfo) ($50F3 6000)
//----------
#define Civic_VBLInt $000 // Read-only VBL flag register
#define Civic_VBLEnb $110 // Enables VBL interrupt.
#define Civic_VBLClr $120 // Clear VBL interrupt.
#define Civic_Enable $004 // Enables Civics timing generator (Casio).
#define Civic_Reset $10C // Resets Casio.
#define Civic_VDCInt $008 // Read-only VDC flag register.
#define Civic_VDCClr $00C // Clears VDC interrupt.
#define Civic_VDCEnb $010 // Enables VDC interrupt.
#define Civic_VDCClk $018 // Enables VDC clock.
#define Civic_VidInSize $014 // Controls video-in Rows (1024 vs. 1536 bytes).
#define Civic_VidInDble $208 // Controls whether Civic Doubles each Video-in Field
#define Civic_ScanCtl $01C // Controls progressive vs. interlaced scans.
#define Civic_GSCDivide $020 // Controls graphics clock divide count.
#define Civic_VSCDivide $02C // Controls video-in clock divide count.
#define Civic_VRAMSize $040 // Controls VRAM sizing (1 vs. 2 Mbytes).
#define Civic_RfrshCtl $044 // Controls the refresh mode.
#define Civic_BusSize $04C // Controls the bus size (32 vs. 64 bits).
#define Civic_SpeedCtl $050 // Controls the timing (25 vs. 33 MHz).
#define Civic_ConvEnb $054 // Enables convolution.
#define Civic_ReadSense $088 // Sense-line registers.
#define Civic_SenseCtl $058 //
#define Civic_Sense0 $05C //
#define Civic_Sense1 $060 //
#define Civic_Sense2 $064 //
#define Civic_SenseTst $068 //
#define Civic_SyncClr $06C // Disables RGB (Sync) output.
#define Civic_BaseAddr $0C0 // Base address of active video.
#define Civic_RowWords $094 // Row long words of active video.
#define Civic_AdjF1 $128 // Timing adjust registers.
#define Civic_AdjF2 $124 //
#define Civic_Piped $440 //
#define Civic_HSerr $180 // Horizontal timing registers.
#define Civic_HlfLn $280 //
#define Civic_HEq $2C0 //
#define Civic_HSP $300 //
#define Civic_HBWay $340 //
#define Civic_HAL $380 //
#define Civic_HFP $3C0 //
#define Civic_HPix $400 //
#define Civic_VHLine $480 // Vertical timing registers.
#define Civic_VSync $4C0 //
#define Civic_VBPEqu $500 //
#define Civic_VBP $540 //
#define Civic_VAL $580 //
#define Civic_VFP $640 //
#define Civic_VFPEqu $680 //
#define Civic_CurLine $6C0 //
#define Civic_VInHAL $1C0 // Video-in timing registers.
#define Civic_VInHFPD $200 //
#define Civic_VInHFP $240 //
#define Civic_VInVAL $5C0 //
#define Civic_VInVFP $600 //
#define Civic_HLDB $114 // Horizontal test/control registers.
#define Civic_HHLTB $118 //
#define Civic_HActHi $11C
#define Civic_VLDB $100 // VSync test/control registers.
#define Civic_VHLTB $104 //
#define Civic_VActHi $108 //
#define Civic_TestEnb $12C // Enables Casio test mode.
#define Civic_CntTest $140 // Count test register.
//----------
// Sebastian register definitions (offsets from SebastianAddr in ProductInfo) ($50F3 0000)
//----------
#define SebastAddrReg $000 // CLUT/DAC Address register.
#define SebastDataReg $010 // CLUT/DAC Data register.
#define SebastPCBR $020 // CLUT/DAC Pixel Bus Control register.
//----------
// Endeavor register definitions
//----------
#define Endeavor $50F2E000 // Base address of Endeavor in Cyclone.
#define EndeavorM $000 // 8-bit numerator.
#define EndeavorN $010 // 8-bit denominator.
#define EndeavorClk $020 // Clock select (A or B).
// <SM4> rb, end
//----------
// MSC register definitions (offsets from MSCAddr in ProductInfo) ($50F2 6000)
//----------
#define MSCSlotIFR $02 // slots interrupt flags
#define MSCVIA2IFR $03 // VIA 2 interrupt flags
#define MSCConfig $10 // RAM, clock configuration
#define MSCSlotIER $12 // slots interrupt enables
#define MSCVIA2IER $13 // VIA 2 interrupt enables
#define MSCClkCntl $21 // peripherals clock control
#define MSCSndCntl $22 // sound control
#define MSCFlashWrEnb $23 // flash ROM write enable
#define MSCPowerCycle ($50FA0000-$50F26000) // CPU power off control register <H2>
// ====== VIA2 BufferB Equivalent Address: $50F26000 =====
#define MSCExpansion 0 // 0 = enable on-board external cache (not currently used)
//v2PMack EQU 1 ; Power manager handshake acknowledge
//v2PMreq EQU 2 ; Power manager handshake request
//reserved3 EQU 3 ; reserved
//reserved4 EQU 4 ; reserved
//reserved5 EQU 5 ; reserved
//reserved6 EQU 6 ; reserved
//reserved7 EQU 7 ; reserved
// ====== Slot Interrupt Flags Address: $50F26002 =====
//reserved0 EQU 0 ; reserved
//reserved1 EQU 1 ; reserved
//reserved2 EQU 2 ; reserved
//reserved3 EQU 3 ; reserved
//reserved4 EQU 4 ; reserved
//RvIRQE EQU 5 ; slot E interrupt
//RvIRQLCD EQU 6 ; LCD display VBL interrupt
//reserved7 EQU 7 ; reserved
// ====== VIA 2 Interrupt Flags Address: $50F26003 =====
//RvSCSIDRQ EQU 0 ; 1 = SCSI DRQ interrupt
//RvAnySlot EQU 1 ; 1 = any slot(0-6).IRQ int
//reserved2 EQU 2 ; reserved
//RvSCSIRQ EQU 3 ; 1 = SCSI IRQ interrupt
//RvSndIRQ EQU 4 ; 1 = Apple Sound Chip interrup
//reserved5 EQU 5 ; reserved
//reserved6 EQU 6 ; reserved
//RvSetClr EQU 7 ; on READ, 1 = any enable interrupt
// ====== MSC Configuration Address: $50F26010 =====
#define MSC25MHz 0 // 1 = 25MHz system, 0 = 33MHz system
#define MSCEconoBit 1 // 1 = econo-mode enabled (switches to 16MHz)
#define MSCFastROM 2 // 1 = 100ns ROMs installed, 0 = 120ns ROMs installed
//reserved3 EQU 3 ; reserved
#define MSCBank8M 4 // 1 = banks 4-7 are 8MB, 0=banks 4-7 are 2MB
#define MSCSize0 5 // RAM size bit
#define MSCSize1 6 // RAM size bit
#define MSCSize2 7 // RAM size bit
// ====== Slot Interrupt Enables Address: $50F26012 =====
//reserved0 EQU 0 ; reserved
//reserved1 EQU 1 ; reserved
//reserved2 EQU 2 ; reserved
//reserved3 EQU 3 ; reserved
//reserved4 EQU 4 ; reserved
//RvIRQEEn EQU 5 ; slot E interrupt enabled
//RvIRQLCDEn EQU 6 ; LCD display VBL interrupt enabled
//RvSetClr EQU 7 ; on READs, always reads 0
// ====== VIA 2 Interrupt Enables Address: $50F26013 =====
//RvSCSIDRQEn EQU 0 ; 1 = SCSI DRQ interrupt enabled
//RvAnySlotEn EQU 1 ; 1 = any slot(0-6).IRQ int. enabled
//reserved2 EQU 2 ; reserved
//RvSCSIRQEn EQU 3 ; 1 = SCSI IRQ interrupt enabled
//RvSndIRQEn EQU 4 ; 1 = Apple Sound Chip interrupt enabled
//reserved5 EQU 5 ; reserved
//reserved6 EQU 6 ; reserved
//RvSetClr EQU 7 ; on READs, always reads 0
// on WRITEs, 1 = 1-bits in bits 0-6 write 1's
// 0 = 1-bits in bits 0-6 write 0's
// ====== Peripherals Clock Control Address: $50F26021 =====
#define MSCIOClk 0 // 1=15.6672MHz I/O clock running, 0=stopped
#define MSCSCCClk 1 // 1=3.672MHz SCC clock running, 0=stopped
#define MSCSCSIReset 2 // 1=SCSI reset not asserted, 0=reset asserted (clocks stop)
#define MSCLCDReset 3 // 1=LCD reset not asserted, 0=reset asserted (clocks stop)
//reserved4 EQU 4 ; reserved
//reserved5 EQU 5 ; reserved
//reserved6 EQU 6 ; reserved
//reserved7 EQU 7 ; reserved
// ====== Sound Control Address: $50F26022 =====
#define MSCSndPower 0 // 1=DFAC power on, 0=DFAC power off
//reserved1 EQU 1 ; reserved
//reserved2 EQU 2 ; reserved
//reserved3 EQU 3 ; reserved
//reserved4 EQU 4 ; reserved
//reserved5 EQU 5 ; reserved
#define MSCSndBusy 6 // 1=access to FIFO since last access to this register
#define MSCSndLatch 7 // 1=DFAC is powered up and initialized
#define MSCDefConfig ((1<<MSC25MHz)|(0<<MSCEconoBit)|(0<<MSCFastROM)|(0<<MSCBank8M)|(0<<MSCSize0)) // set 2MB so there's real RAM for BootBeep <H10>
//__________________________________________________________________________________________
//
//
// Memory Controllers - Register Definitions and Misc Equates for Memory Controllers. Included
// are: FMC, ORWELL, JAWS, Niagra, Ponti, djMEMC.
//
//
//__________________________________________________________________________________________
//---------------------------------------------------
// FMC (Fitch Memory Controller) Equates
//---------------------------------------------------
#define FMCConfig $0 // offset to configuration register. It is a 16
// bit wide register with a 1 bit wide data port
// on d24, so do byte writes (and rotates) and
// let dynamic bus sizing replicate it on d24-31.
#define FMCLatch $10 // offset to 'latch config data' register (latches
// on a write to here)
#define FMCInit $F3EF // config reg initial value <4.5><4.6><4.9><1>
#define FMCRPUInit $F3FF // config reg initial value (parity) <1>
//---------------------------------------------------
// Orwell Memory Controller Equates <5>
//---------------------------------------------------
// Orwell only has one input/output data bit. So to store or retrieve any configuration register
// information, you must read/write a succession of long-word addresses, starting at the addresses
// below, with the ONLY valid data bit being {reg}:0. Valued being read must be assembled one bit
// at a time; values being written must be loaded into the config registers 1 bit at a time. The
// new config. register values do not become active until a "latch" register address associated
// with the config. register is written.
//
// The below addresses correspond to longword addresses where bit 0 of whatever data register used to
// read/write the location will be stored. The Orwell configuration register is a 34-bit register,
// with each bit written to/read by addressing the appropriate longword offset.
//
// The configuration register can be thought of like this:
//
// +---------------------------------------------------------------------------------------------+
// | PAR_ODD | PAR_ENB | REFRESH | ROM_SPEED | DRAM_SPEED | CLK_SPEED | BANK_D | BANK_C | BANK_B |
// +---------------------------------------------------------------------------------------------+
// 28 27 26 24 23 21 20 19 18 17 12 11 6 5 0
//
// <T6>
// +---------------------------------------------------------------------+ <T6>
// | RAS | Optional WRITE | Optional Read | Optional Read | Page | <T6>
// | Precharge | wait state | 2nd wait state | 1st wait state | Mode | <T6>
// +---------------------------------------------------------------------+ <T6>
// 33 32 31 30 29 <T6>
// *** Register Offsets ***
#define OrCfgRegAddr 0 // starting offset of config reg. bits
#define OrCfgRegSize 34 // number of bits in the configuration register <T6>
#define OrBankFieldSize 6 // each bank config. reg. field is 6 bits wide
#define OrBankBCfgAddr (OrCfgRegAddr) // starting offset of BankB(5:0)
#define OrBankCCfgAddr (OrBankBCfgAddr+(4*OrBankFieldSize))// starting offset of BankC(5:0)
#define OrBankDCfgAddr (OrBankCCfgAddr+(4*OrBankFieldSize))// starting offset of BankD(5:0)
#define OrClkSpeedAddr (OrBankDCfgAddr+(4*OrBankFieldSize))// starting address of Clock_Speed
// ... Clock_Speed is 1 bit (0=25MHz)
#define OrDRAMSpeedAddr (OrClkSpeedAddr+4) // starting address of DRAM Speed(1:0)
#define OrDRAMFieldSize 2 // DRAM speed config reg. field is 2 bits wide
#define OrROMSpeedAddr (OrDRAMSpeedAddr+(4*OrDRAMFieldSize))// starting address of ROM Speed(2:0)
#define OrROMFieldSize 3 // ROM speed config reg. field is 3 bits wide
#define OrRefreshAddr (OrROMSpeedAddr+(4*OrROMFieldSize))// starting address of Refresh Rate(2:0)
#define OrRefreshSize 3 // Refresh speed config reg. field is 3 bits wide
#define OrParityEnbAddr (OrRefreshAddr+(4*OrRefreshSize))// starting address of parity enable/disable
// ... Parity_Enable is 1 bit (0=parity OFF)
#define OrParityTypAddr (OrParityEnbAddr+4) // starting address of parity type (even/odd)
// ... Parity_Type is 1 bit (0=parity EVEN)
#define OrPageMode (OrParityTypAddr+4) // <T6>
#define OrWaitRead1 (OrPageMode+4) // <T6>
#define OrWaitRead2 (OrWaitRead1+4) // <T6>
#define OrWaitWrite1 (OrWaitRead2+4) // <T6>
#define OrRASPrecharge (OrWaitWrite1+4) // <T6>
#define OrLatchOffset $A0 // offset from start of config reg. where latches live <T6>
#define OrwellLatches (OrCfgRegAddr+OrLatchOffset)// starting address of Latch Addresses <T6>
#define OrLoadBanks (OrwellLatches) // Load Bank Config Reg. Latch address <T6>
#define OrLoadSpeeds (OrLoadBanks+4) // Load Clock, DRAM and ROM Speeds Latch address
#define OrLoadRefresh (OrLoadSpeeds+4) // Load Refresh interval Latch address
#define OrLoadParity (OrLoadRefresh+4) // Load Parity enable/disable and type Latch address
#define OrLoadMode (OrLoadParity+4) // Load Page Mode On/Off address <T6>
#define OrLoadWaitStates (OrLoadMode+4) // Load Read/Write extra waitstates address <T6>
#define OrLoadPrecharge (OrLoadWaitStates+4) // Load RAS precharge address <T6>
#define OrParityStatus $100 // A0-BC = LS 8 bits, C0-DC = LM 8 bits <T6>
// E0-FC = HM 8 bits, 100-11C = MS 8 bits
#define OrParErrInByte0 $180 // =1 if parity error occurred in byte 0
#define OrParErrInByte1 $184 // =1 if parity error occurred in byte 1
#define OrParityError $188 // =1 if parity error occurred (period)
// *** Initializing Values at Bootup Time ***
#define ORINITBankB $10 // 10=Bank B at 64MB
#define ORINITBankC $20 // 20=Bank C at 128MB
#define ORINITBankD $30 // 30=Bank D at 192MB
#define ORINITClock25 1 // 1=25MHz, 0=33MHz <T12>
#define ORINITClock33 0 // <T12>
#define ORINITDRAMSpeed 1 // 0=100ns, 1=80ns, 2=60ns <10>
#define ORINITROMSpeed25 2 // *n* = Clock_Access-3 (0 = 3 Clock_Access) <T6><T12>
#define ORINITROMSpeed33 4 // *n* = Clock_Access-3 (0 = 3 Clock_Access) <T6><T12>
#define ORINITREFRESH25 2 // 0=25MHz 7.8µsec, 1=33MHz, 7.8µsec <21> <T12>
// 2=25MHz 15.6µsec, 3=33MHz 15.6µsec <21> <T12>
#define ORINITREFRESH33 3 // <21> <T12>
#define ORINITParity 0 // 0=parity OFF, 1=parity ON
#define ORINITParType 1 // 0=even, 1=odd
// Additional (programmable) wait states for reads and writes
#define ORINITPageMode 0 // 0=off, 1=on <T6>
#define ORINITWaitRd1 0 // 0=off, 1=on (unless Rd2 = 1, in which case it is interpreted as off)<T6>
#define ORINITWaitRd2 0 // 0=off, 1=on (unless Rd1 = 1, in which case it is interpreted as off)<T6>
#define ORINITWaitWr1 0 // 0=off, 1=on <T6>
#define ORINITRAS25 0 // 0=2 cycles, 1=3 cycles <T6>
#define ORINITRAS33 1 // <T12>
// These are 32-bit constants that hold all but 2 bits of the initial defaults we .
// would want to jam into the Orwell configuration register. These are arranged .
// in order the register is memory-mapped to facilitate the code that sticks them .
// in the register. There are two bits that don't fit in a 32-bit constant, the .
// optional -OrWaitWrite1- and the not-so-optional -OrRASPrecharge-. Those values .
// are used and initialized separately. .
#define ORWELL_INIT25 ((ORINITWaitRd2<<31)|\
(ORINITWaitRd1<<30)|\
(ORINITPageMode<<29)|\
(ORINITParType<<28)|\
(ORINITParity<<27)|\
(ORINITREFRESH25<<24)|\
(ORINITROMSpeed25<<21)|\
(ORINITDRAMSpeed<<19)|\
(ORINITClock25<<18)|\
(ORINITBankD<<12)|\
(ORINITBankC<<6)|\
(ORINITBankB))
#define ORWELL_INIT33 ((ORINITWaitRd2<<31)|\
(ORINITWaitRd1<<30)|\
(ORINITPageMode<<29)|\
(ORINITParType<<28)|\
(ORINITParity<<27)|\
(ORINITREFRESH33<<24)|\
(ORINITROMSpeed33<<21)|\
(ORINITDRAMSpeed<<19)|\
(ORINITClock33<<18)|\
(ORINITBankD<<12)|\
(ORINITBankC<<6)|\
(ORINITBankB))
//---------------------------------------------------
// JAWS Memory Controller Equates
//---------------------------------------------------
#define JAWSRAMWaitS $00000 // RAM wait state control register offset
#define JAWSEconoMode $04000 // Econo-Mode register offset <21> HJR
#define JAWSROMWaitS $06000 // ROM wait state control register offset
#define JAWSMemConfigA $10000 // Contiguous memory (knitting) registers
#define JAWSMemConfigB $12000 // Contiguous memory (knitting) registers
#define JAWSMemConfigC $14000 // Contiguous memory (knitting) registers
#define JAWSPowerCycle $20000 // CPU power off control register
#define JAWSSetCPUClock $22000 // Controls the CPU clock frequency
#define JAWSPCBLevel $30000 // Selects between SCC and SCC/SCSI combo
#define JAWSLockRAM $32000 // Puts RAM in self refresh state
#define JAWSGetCPUClock $34000 // Returns the CPU clock frequency
//---------------------------------------------------
// Niagra Memory Controller Equates
//---------------------------------------------------
#define NiagraVidCntCtr $02000 // Video count options <21> HJR
#define NiagraGUR $16000 // General Utility Registers (ponti register access)<SM4> rb
#define NiagraVidAcc1 $22000 // Video Accesses thru 64
#define NiagraVidAcc2 $24000 // Video Accesses thru 512
#define NiagraVidAcc3 $26000 // Video Accesses thru 2K
#define NiagraFlashEnbl $30000 // Enable flash from Niagra
#define NiagraFPUAcc $34000 // FPU access detected
#define NiagraSpeedReg $36000 // Returns the CPU clock frequency
//--------------------------------------------------- <SM4> rb, start
// Ponti Register Equates (NiagraGUR register space + offset
//---------------------------------------------------
#define PontiSPIMdmCtl $000
#define PontiSndCtl $400
#define PontiSPISftReg $800
#define PontiLmpSftCtl $C00
// Ponti PontiSPIMdmCtl bit definitions
#define PontiSPIMdmId 0 // (1 = SPI modem connected)
#define PontiSPIAck 2 // (1 = ack idle)
#define PontiSPIReq 3 // (1 = req idle)
#define PontiSPIIrq 4 // (1 = interrupting)
// Ponti PontiSoundCtl bit definitions
#define PontiSndSPIIrqMsk 0 // (1 = mask int) - irq mask for PontiSPIIrq
#define PontiSndIntMic 1 // (1 = using internal mic) - flag to check which mike is used <H22>
#define PontiSndLatchClr 2 // (pulse high to clear) - line directly to latch
#define PontiSndLatchData 3 // (1 = snd ckt used) - output value of the sound latch
#define PontiSndPWMOff 4 // (1 = PWM off) - ultimate off to remove "pop"
#define PontiSndPwrOn 5 // (1 = power snd ckt) - sw equal of latch output
#define PontiSndMux0 6 // (1 = ???)
#define PontiSndMux1 7 // (1 = modem sound {regardless of Mux0})
// Ponti PontiLmpSftCtl bit definitions
#define PontiLmpOff 0 // (1 = backlight on) - turn on the backlight tube
#define PontiLmpHWCtl 1 // (1 = Hardware control) - if set, hardware control loop
#define PontiLmpMux0 2 // (1 = 1/2 pot) - 1/2 scale pot reduction
#define PontiLmpMux1 3 // (1 = 1/4 pot) - 1/4 scale pot reduction
#define PontiLmpSPIDir 4 // (1 = shift out) - direction of shift register
// <SM4> rb, end
//------------------------------------- <H21> thru next <H21>
// djMEMC memory controller equates
//-------------------------------------
// This hard-coded I/O address is in here because there is no more room in the
// Universal tables to hold this information.
#define MEMCAddr $50F0E000 // same for both Wombat + WLCD memory maps
#define MEMCRegisterStart 0
#define MEMCIntleaveEnable (MEMCRegisterStart) // DRAM interleave enable reg.
#define dj_OneBufferedBusBit 5
// djMEMC supports up to a maximum of 10 (TEN) DRAM banks
#define dj_MaxBanks 10 // <H22>
#define MEMCDRAMCfg0 (MEMCIntleaveEnable+4) // Bank 0 cfg reg
#define MEMCDRAMCfg1 (MEMCDRAMCfg0+4) // Bank 1 cfg reg
#define MEMCDRAMCfg2 (MEMCDRAMCfg1+4) // Bank 2 cfg reg
#define MEMCDRAMCfg3 (MEMCDRAMCfg2+4) // Bank 3 cfg reg
#define MEMCDRAMCfg4 (MEMCDRAMCfg3+4) // Bank 4 cfg reg
#define MEMCDRAMCfg5 (MEMCDRAMCfg4+4) // Bank 5 cfg reg
#define MEMCDRAMCfg6 (MEMCDRAMCfg5+4) // Bank 6 cfg reg
#define MEMCDRAMCfg7 (MEMCDRAMCfg6+4) // Bank 7 cfg reg
#define MEMCDRAMCfg8 (MEMCDRAMCfg7+4) // Bank 8 cfg reg
#define MEMCDRAMCfg9 (MEMCDRAMCfg8+4) // Bank 9 cfg reg
#define MEMCmemTop (MEMCDRAMCfg9+4) // Top of stitched RAM
#define MEMCconfig (MEMCmemTop+4) // "Multiple bit DRAM/ROM configuration register"
#define MEMCRefresh (MEMCconfig+4) // DRAM refresh rate register
//__________________________________________________________________________________________
//
//
// Interrupt Vector Definitions and Masks
//
//
//__________________________________________________________________________________________
//---------------------------------------------------
// Interrupt Masks
//---------------------------------------------------
#define hiIntMask $0700 // programmer switch only
#define pwrOffEnbl $2500 // mask to allow poweroff interrupts
#define sccIntMask $0400 // SCC interrupt level
#define sccEnblMask $FBFF // mask to enable SCC interrupts
#define slotIntMask $0200 // slot's interrupt level <v1.4><1.9>
#define viaIntMask $0100 // VIA1 interrupt level
#define loIntMask $0100
//---------------------------------------------------
// Hardware Base Addresses
//---------------------------------------------------
#define WrOffs 0 // SCSI write addrs are same as read base
#define MskIOP1 1 // IOP 1 (SWIM) is level 1 interrupt
#define MskVIA1 1 // VIA 1 is level 1
#define MskADB 1 // ADB is level 1
#define Msk60Hz 1 // 60 Hz is level 1
#define MskSCSI 2 // SCSI is level 2
#define MskSound 2 // sound is level 2 <4.5>
#define MskSlots 2 // slots are level 2 interrupts
#define MskRTC 3 // RTC is level 3
#define MskIOP0 4 // IOP 0 (& SCC chip) is level 4
#define MskPwrOff 6 // Poweroff button is level 6
#define MskNMI 7 // NMI switch is level 7
// --------------------------------------------------------------------------------------------------- <T8>
// Bit definitions for the Cache Control Register (CACR) on various CPUs <T8>
// --------------------------------------------------------------------------------------------------- <T8>
//
// 020 CACR: (from MC68020 User's Manual, 3rd Ed. pg. 6-3) <T8>
// +------------------------------------------------+ <T8>
// | 0 .............. 0 | C | CE | F | E | <T8>
// +------------------------------------------------+ <T8>
// 31 4 3 2 1 0 <T8>
//
// C = Clear Cache <T8>
// CE = Clear Entry <T8>
// F = Freeze Cache <T8>
// E = Enable (Inst.) Cache <T8>
//
//
// 030 CACR: (from MC68030 User's Manual, 2nd Ed. pg 6-15) <T8>
// +------------------------------------------------------------------------------------+ <T8>
// | 0 ... 0 | WA | DBE | CD | CED | FD | ED | 0 | 0 | 0 | IBE | CI | CEI | FI | EI | <T8>
// +------------------------------------------------------------------------------------+ <T8>
// 31 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 <T8>
//
// WA = Write Allocate <T8>
// DBE = Data Burst Allocate <T8>
// CD = Clear Data Cache <T8>
// CED = Clear Entry in Data Cache <T8>
// FD = Freeze Data Cache <T8>
// ED = Enable Data Cache <T8>
// IBE = Instruction Burst Enable <T8>
// CI = Clear Instruction Cache <T8>
// CEI = Clear Entry in Instruction Cache <T8>
// FI = Freeze Instruction Cache <T8>
// EI = Enable Instruction Cache <T8>
//
//
// 040 CACR: (from MC68040 User's Manual, 1st Ed., pg. 7-19) <T8>
// +-------------------------------------+ <T8>
// | DE | 0 ... 0 | IE | 0 ... 0 | <T8>
// +-------------------------------------+ <T8>
// 31 30 16 15 14 0 <T8>
//
// DE = Enable Data Cache <T8>
// IE = Enable Instruction Cache <T8>
//
// MC68040 CACR bits of note:
#define CACR_IE_040 15 // bit # of instruction cache enable/disable on 040s <T8>
#define CACR_DE_040 31 // bit # of data cache enable/disable on 040s <T8>
// MC68020 and MC68030 CACR bits of note:
#define CACR_EI_020_030 0 // bit # of inst. cache enable/disable on 020/030s <T8>
#define CACR_FI_020_030 1 // bit # of inst. cache freeze on 020/030s <T8>
#define CACR_CEI_020_030 2 // bit # of inst. cache flush entry on 020/030s <T8>
#define CACR_CI_020_030 3 // bit # of inst. cache flush on 020/030s <T8>
#define CACR_IBE_030 4 // bit # of data cache burst enable on 030s <T8>
#define CACR_ED_030 8 // bit # of data cache enable/disable on 030s <T8>
#define CACR_FD_030 9 // bit # of data cache freeze on 030s <T8>
#define CACR_CED_030 10 // bit # of data cache flush entry on 030s <T8>
#define CACR_CD_030 11 // bit # of data cache flush on 030s <T8>
#define CACR_DBE_030 12 // bit # of data cache burst enable on 030s <T8>
#define CACR_WA_030 13 // bit # of write allocate enable on 030s <T8>
//__________________________________________________________________________________________
//
//
// Miscellaneous Equates - Look Here If You Can't Find It Anywhere Else.
//
//
//__________________________________________________________________________________________
#define Machine 7 // new Machine number for patches <18>
//---------------------------------------------------
// System Software Information
//---------------------------------------------------
#define numOsTrap 256 // number of os traps
#define ToolTable $0E00 // start of toolbox trap table
#define numTbTrap 1024 // number of toolbox traps
#define numTrapMask (numTbTrap-1) // mask for number of tb traps
#define JMemMgr24 $1E00 // jump vector start for 24 bit Memory Manager <v1.9>
#define JMemMgr32 $1F00 // jump vector start for 32 bit Memory Manager <v1.9>
#define HeapStart $2800 // Low mem is now 10k bytes <SM13>
#define defSysHeap $18000 // Default size of the system heap
#define nDfltStackSize $6000 // Default stack size
//**** maybe not so temporary to allow things to build **** <3.5>
#define oneSecConst 8 // gets converted to $80000 for onesec constant<3.5>
#if BlackBirdDebug
#define ROMStart $40000000
#else
#define ROMStart $40800000 // starting address of final ROM code <3.5>
#endif
#define snd2MemTop $300 // SoundLow to Memtop
#define pwm2MemTop $2FF // PWMBuffer to MemTop
#define bufWorldSize 8192 // total size of the BufPtr world <H16>
//--------------------------------------------------- <SM4> rb, start
// Sound parameters <P4>
//---------------------------------------------------
#define sampleSize 4 // number of bytes per sample
#define bufferSize 960 // number of samples per buffer
#define sampleRate (24 * 1024) // 24KHz sample rate
//---------------------------------------------------
// PSC Hardware Defs
//---------------------------------------------------
// === Hardware Base Addresses ===
#define PSCBase $50f31000 // Base address of the PSC
//---------------------------------------------------
// PSC Sound Register Offsets
//---------------------------------------------------
#define sndComCtl $200 // [word] sound and communications control
#define singerCtl $204 // [long] singer sound CODEC control
#define singerStat $208 // [long] singer sound CODEC status (read only)
#define sndPhase $20c // [long] sound subsystem phase (read only)
#define sndInBase $210 // [long] sound input double-buffer base address
#define sndOutBase $214 // [long] sound output double buffer base address
#define sndSize $218 // [word] sound input and output buffer size
#define dspOverRun $21C // [byte] DSP overrun status register.
//---------------------------------------------------
// PSC Sound Register Bit Definitions
//---------------------------------------------------
// === sndComCtl register ===
#define pSubFrmInSel 0 // singer sound CODEC input subframe select
#define pSubFrmInSel1 0 // singer sound CODEC input subframe select, lsbit
#define pSubFrmInSel2 1 // singer sound CODEC input subframe select, msbit
#define pSubFrmOutSel 2 // singer sound CODEC output subframe select
#define pSubFrmOutSel1 2 // singer sound CODEC output subframe select, lsbit
#define pSubFrmOutSel2 3 // singer sound CODEC output subframe select
#define pSubFrmOutSel3 4 // singer sound CODEC output subframe select
#define pSubFrmOutSel4 5 // singer sound CODEC output subframe select, msbit
#define pFrmIntEn 6 // frame interrupt enable
#define pSndInEn 7 // sound input DMA enable
#define pSndOutEn 8 // sound output DMA enable
#define pSndRate 9 // singer sound CODEC sampling rate control
#define pSndRate1 9 // singer sound CODEC sampling rate control, lsbit
#define pSndRate2 10 // singer sound CODEC sampling rate control, msbit
#define pComRate 11 // communications CODEC sampling rate contrl
#define pComRate1 11 // communications CODEC sampling rate contrl, lsbit
#define pComRate2 12 // communications CODEC sampling rate contrl, msbit
// equ 13 ; unused
// equ 14 ; unused
// equ 15 ; unused
#define sndComCtlInit ((0<<pSubFrmInSel)|\
(0<<pSubFrmOutSel)|\
(0<<pFrmIntEn)|\
(0<<pSndInEn)|\
(0<<pSndOutEn)|\
(0<<pSndRate)|\
(0<<pComRate))
#define soundOutEnable ((0<<pSubFrmInSel)|\
(1<<pSubFrmOutSel)|\
(0<<pFrmIntEn)|\
(0<<pSndInEn)|\
(1<<pSndOutEn)|\
(0<<pSndRate)|\
(0<<pComRate))
// === singerCtl register ===
#define pOutputPort 0 // set digital output port
#define pOutputPort1 0 // set digital output port, lsb
#define pOutputPort2 1 // set digital output port
#define pOutputPort3 2 // set digital output port
#define pOutputPort4 3 // set digital output port, msb
#define pRightAtten 4 // right ouput attenutaion
#define pRightAtten1 4 // right ouput attenutaion, lsb
#define pRightAtten2 5 // right ouput attenutaion
#define pRightAtten3 6 // right ouput attenutaion
#define pRightAtten4 7 // right ouput attenutaion, msb
#define pLeftAtten 8 // Left ouput attenutaion
#define pLeftAtten1 8 // Left ouput attenutaion, lsb
#define pLeftAtten2 9 // Left ouput attenutaion
#define pLeftAtten3 10 // Left ouput attenutaion
#define pLeftAtten4 11 // Left ouput attenutaion, msb
#define pRightGain 12 // right input gain
#define pRightGain1 12 // right input gain, lsb
#define pRightGain2 13 // right input gain
#define pRightGain3 14 // right input gain
#define pRightGain4 15 // right input gain, msb
#define pLeftGain 16 // left input gain
#define pLeftGain1 16 // left input gain, lsb
#define pLeftGain2 17 // left input gain
#define pLeftGain3 18 // left input gain
#define pLeftGain4 19 // left input gain, msb
#define pRightInMux 20 // right input mux
#define pLeftInMux 21 // left input mux
#define pMute 22 // mute bit
#define pExpCtl 23 // expand bit for control
// equ 24 ; unused
// equ 25 ; unused
// equ 26 ; unused
// equ 27 ; unused
// equ 28 ; unused
// equ 29 ; unused
// equ 30 ; unused
// equ 31 ; unused
#define singerCtlInit (($F<<pOutputPort)|\
(0<<pRightAtten)|\
(0<<pLeftAtten)|\
($5<<pRightGain)|\
($5<<pLeftGain)|\
(0<<pRightInMux)|\
(0<<pLeftInMux)|\
(1<<pMute)|\
(0<<pExpCtl))
#define unMute (($F<<pOutputPort)|\
(0<<pRightAtten)|\
(0<<pLeftAtten)|\
($5<<pRightGain)|\
($5<<pLeftGain)|\
(0<<pRightInMux)|\
(0<<pLeftInMux)|\
(0<<pMute)|\
(0<<pExpCtl))
// === singerStat register ===
#define pInputPort1 0 // set digital Input port, lsb
#define pInputPort2 1 // set digital Input port
#define pInputPort3 2 // set digital Input port
#define pInputPort4 3 // set digital Input port, msb
// equ 4 ; unused
// equ 5 ; unused
// equ 6 ; unused
// equ 7 ; unused
// equ 8 ; unused
// equ 9 ; unused
// equ 10 ; unused
// equ 11 ; unused
#define pRevNum1 12 // revision number, lsb
#define pRevNum2 13 // revision number
#define pRevNum3 14 // revision number
#define pRevNum4 15 // revision number, msb
#define pSingerStatus1 16 // status bits, lsb
#define pSingerStatus2 17 // status bits
#define pSingerStatus3 18 // status bits
#define pSingerStatus4 19 // status bits, msb
#define pOFRight 20 // right channel overflow
#define pOFLeft 21 // left channel overflow
#define pValidData 22 // valid sound data
#define pExpStat 23 // expand bit for status
// equ 24 ; unused
// equ 25 ; unused
// equ 26 ; unused
// equ 27 ; unused
// equ 28 ; unused
// equ 29 ; unused
// equ 30 ; unused
// equ 31 ; unused
// === sound phase register ===
#define pPreScaleLSB 0 // pre-scaler lsbit
#define pReScaleMSB 5 // pre-Scaler msbit
#define pOffsetLSB 6 // sample offset lsbit
#define pOffsetMSB 17 // sample offset msbit
// equ 18 ; unused
// equ 19 ; unused
// equ 20 ; unused
// equ 21 ; unused
// equ 22 ; unused
// equ 23 ; unused
// equ 24 ; unused
// equ 25 ; unused
// equ 26 ; unused
// equ 27 ; unused
// equ 28 ; unused
// equ 29 ; unused
// equ 30 ; unused
// equ 31 ; unused
#define phaseOffsetMsk $003FFFC0 // <SM4> rb, end
//---------------------------------------------------
// PSC DSP Register Bit Definitions <SM10> ejb
//---------------------------------------------------
// === dspOverrun register ===
#define pdspReset 0 // when set places the dsp in reset state
#define pdspResetEn 1 // when cleared disables the dspReset bit
#define pdspFrameOvr 2 // when set indicates cat2 frame overrun on the dsp
// equ 3 ; unused
// equ 4 ; unused
// equ 5 ; unused
// equ 6 ; unused
#define pdspSet 7 // "0" clears, "1" sets for any bit field [0:6] containing a "1"
//---------------------------------------------------
// ???
//---------------------------------------------------
#define seRegs $0C30 // offset to Sys Error Regs w/o Overlay
//---------------------------------------------------
// Hardware configuration bits.
//---------------------------------------------------
#define hwCbSCSI 15 // SCSI port present
#define hwCbClock 14 // New clock chip present
#define hwCbExPRAM 13 // Extra Parameter Ram valid.
#define hwCbFPU 12 // FPU chip present.
#define hwCbMMU 11 // Some kind of MMU present (see MMUType for what kind).
#define hwCbADB 10 // Apple Desktop Bus present.
#define hwCbAUX 9 // Running A/UX <2.8>
#define hwCbPwrMgr 8 // Power Manager present <2.8>
#define hwCmSCSI ((1 << hwCbSCSI))
#define hwCmClock ((1 << hwCbClock))
#define hwCmExPRAM ((1 << hwCbExPRAM))
#define hwCmFPU ((1 << hwCbFPU))
#define hwCmMMU ((1 << hwCbMMU))
#define hwCmADB ((1 << hwCbADB))
#define hwCmAUX ((1 << hwCbAUX))
#define hwCmPwrMgr ((1 << hwCbPwrMgr))
//---------------------------------------------------
// HcMac Clock Change Addresses
//---------------------------------------------------
#define Clock16M $FE0000 // Go to sixteen megahertz clock throughput
#define Clock1M $FE0002 // Go to one megahertz clock throughput (adds 64 wait states)
//---------------------------------------------------
// SCC Clock Rates, Baud Rate Constants
//---------------------------------------------------
#define nuMacClock 36864
#define nuMacConst 115200
#define macClock 36707 // in Hz * 100
#define macConst 114709 // in Hz/32
#define hcMacClock 36720 // SCC clock rates
#define hcMacConst 114750
//---------------------------------------------------
// Deep Shit Rectangle info
//---------------------------------------------------
#define dsRectTL ((64<<16)+32) // top left = 64,32
#define dsRectBR ((190<<16)+480) // bottom right = 190,480
#define dsRectHei ((DSrectBR & $FFFF0000)-(DSrectTL & $FFFF0000)>>16)
#define dsRectLen ((DSrectBR & $FFFF)-(DSrectTL & $FFFF))
//---------------------------------------------------
// System Error Equates
//---------------------------------------------------
#define seVars (seRegs) // start of system error data space (wrap city)
#define seVSize 128 // # of bytes in space
#define seD0 (seVars) // loc of saved reg D0
#define seA0 (seD0+32) // loc of saved reg A0
#define seA7 (seA0+28) // loc of saved reg A7
#define sePC (seA7+4) // loc of saved PC
#define seSR (sePC+4) // loc of saved SR
#define seAccess (seSR+2) // PC address during bus/address error
#define seCmdSize (seAccess+4) // # of bytes of parameters passed in _debugger call
#define se000BE (seCmdSize+2) // 8 bytes of bus error info for 68000
#define seLastVar (se000BE+8) // last var in System Error data space
//---------------------------------------------------
// ROM based debugger nub
//---------------------------------------------------
#define rdPort (seLastVar) // Number of port currently in use (0 => no link, 1 => A, 2 => B)
#define rdCode (rdPort+2) // Ptr to code download buffer.
#define rdAtrap (rdCode+4) // Saved Rom Atrap handler
#define rdLowTrap (rdAtrap+4) // low value for trap handling
#define rdHiTrap (rdLowTrap+2) // high value for trap handling
#define rdResult (rdHiTrap+2) // result of executing down-loaded code, etc. (16 bytes)
#define rdEnd (rdResult+16) // end of vars
//---------------------------------------------------
// Microbug
//---------------------------------------------------
// NOTE: Keep mbDotAddr immediately before mBlocAddr
#define mbBufSize 34
#define mbBuffer (seLastVar) // buffer for input
#define mbSign (mbBuffer+mbBufSize) // ST => negative sign during conversion
#define mbDotAddr (mbSign+2) // saved address
#define mBlocAddr (mbDotAddr+4) // saved location
//---------------------------------------------------
// Alternate ROM vectors
//---------------------------------------------------
#define DiagROM $F80000 // Alternate ROM - initial vector
#define DiagROM1 $F80080 // Alternate ROM - memory sizing vector
#define DiagROM2 $F80088 // Alternate ROM - init I/O vector
//---------------------------------------------------
// Timing constants
//---------------------------------------------------
#define VIAClockHz 783360 // VIA clock rate is 783360 Hz. <2.8>
#define nTicks (VIAClockHz/1000) // VIA timer ticks per msec
#define oneSecTicks 60 // ticks, of course
#ifndef __SysEqu___
#define TimeSCSIDB $0B24 // DBRAs & SCSI access per millisecond <1.9>
#endif
#define ramChk 1024 // Amount of memory tested for stack.
//__________________________________________________________________________________________
//
//
// ROM Header RECORD Definition
//
//
//__________________________________________________________________________________________
#define ROMHeader 0 // offsets to fields in base of ROM
#define ROMHeader_ResetSP 0 // $0000 SP to be loaded at reset time
#define ROMHeader_CheckSum (ResetSP) // $0000 hiram stuffs checksum here
#define ROMHeader_ResetPC 4 // $0004 PC to be loaded at reset time
#define ROMHeader_MachineNumber 8 // $0008 Machine Number
#define ROMHeader_ROMVersion 9 // $0009 ROM Version Number
#define ROMHeader_ReStart 10 // $000A JMP to StartBoot routine
#define ROMHeader_BadDisk 14 // $000E JMP to eject disk, and ReBoot routine
#define ROMHeader_ROMRelease 18 // $0012 ROM Release in HEX, eg. $10B5 is 1.0ß5
#define ROMHeader_PatchFlags 20 // $0014 ROM overpatch basis <H14>
//**Pad**: DS.B 1 // $0015 unused <H14>
#define ROMHeader_ForeighOSTbl 22 // $0016 offset to foreign OS vector table
#define ROMHeader_RomRsrc 26 // $001A HiRam stuffs offset to ROM rsrc header here
#define ROMHeader_Eject 30 // $001E JMP to DoEject routine
#define ROMHeader_DispTableOff 34 // $0022 offset to the compressed dispatch table
#define ROMHeader_Critical 38 // $0026 JMP to Critical error handler
#define ROMHeader_ResetEntry 42 // $002A JMP to Reset Entry Point routine.
#define ROMHeader_RomLoc 46 // $002E (Bit 0: In Ram, Bit 1: In Emulator)
//**Pad**: DS.B 1 // $002F unused
#define ROMHeader_CheckSum0 48 // $0030 checksum 0
#define ROMHeader_CheckSum1 52 // $0034 checksum 1
#define ROMHeader_CheckSum2 56 // $0038 checksum 2
#define ROMHeader_CheckSum3 60 // $003C checksum 3
#define ROMHeader_RomSize 64 // $0040 HiRam stuffs size of ROM in bytes here
// endr ROMHeader
//---------------------------------------------------
// Romulator ROM location bits and TestFor Macro
//---------------------------------------------------
#define locValid1 7 // this must be 1
#define locValid2 6 // this must be 0
#define inEmulatorBit 1 // running in emulator
#define inRamBit 0 // running in ram
#define ForAmusementOnly 0
#if ForAmusementOnly
//__________________________________________________________________________________________
//
//
// Old 16 bit Equates for onMac, onMacPP, and onHcMac
//
//
//__________________________________________________________________________________________
//=======================================;
// Macintosh Plus Hardware Information ;
//=======================================;
#define hwCfgBits (hwCmSCSI|hwCmClock)
#define machine 0
#define rom85Bits $7F // New ROMs, No Power Off.
// === Interrupt Masks ===
#define hiIntMask $0700 // programmer switch only
#define sccIntMask $0200 // SCC interrupt Level <1.5>
#define sccEnblMask $F9FF // mask to enable SCC interrupts
#define viaIntMask $0100 // mask for VIA (and VBL) interrupts
#define loIntMask $0100
// === VIA1 BUFFER A ===
//vSound EQU $7 ; sound volume bits (0..2)
#define vSndPg2 3 // select sound page 2 if 0
//vOverlay EQU 4 ; overlay bit (overlay when 1)
//vHeadSel EQU 5 ; head select line for Sony
#define vPage2 6 // select video page 2 if 0
//vSCCWrReq EQU 7 ; SCC write/request line
#define vAOut ((vSound)|\
(1<<vSndPg2)|\
(1<<vOverlay)|\
(1<<vHeadSel)|\
(1<<vPage2)|\
(0<<vSCCWrReq))
#define vAInit ((1)|\
(1<<vSndPg2)|\
(0<<vOverlay)|\
(1<<vHeadSel)|\
(1<<vPage2)|\
(0<<vSCCWrReq))
// === VIA1 BUFFER B ===
//vRTCData EQU 0 ; real time clock data
//vRTCClk EQU 1 ; real time clock clock pulses
//vRTCEnb EQU 2 ; clock enable (0 for enable)
#define vSW 3 // mouse switch (0 when down)
#define vX2 4 // mouse X level
#define vY2 5 // mouse Y level
#define vH4 6 // horizontal sync
//vSndEnb EQU 7 ; /sound enable (reset when 1)
#define vBOut ((1<<vRTCData)|\
(1<<vRTCClk)|\
(1<<vRTCEnb)|\
(0<<vSW)|\
(0<<vX2)|\
(0<<vY2)|\
(0<<vH4)|\
(1<<vSndEnb))
#define vBInit ((1<<vRTCData)|\
(1<<vRTCClk)|\
(1<<vRTCEnb)|\
(0<<vSW)|\
(0<<vX2)|\
(0<<vY2)|\
(0<<vH4)|\
(1<<vSndEnb))
#define vBufM (vBufB) // mouse state is buffer B
// === Hardware Base Addresses ===
#define PhaseRead $F00000 // Phase read address
#define VBase $EFE1FE // VIA base address
#define AVBufA (VBase+vBufA) // VIA buffer A
#define AVBufB (VBase+vBufB) // VIA buffer B
#define AVBufM (VBase+vBufM) // VIA buffer with mouse button bit
#define SCCRBase $9FFFF8 // SCC base read address
#define SCCWBase $BFFFF9 // SCC base write address
#define sccWrite (SCCWBase-SCCRBase) // general offset for write from read
#define SCSIRd $580000 // base addr SCSI interface - READ
#define SCSIWr $580001 // base addr SCSI interface - WRITE
#define wrOffs (SCSIWr-SCSIRd) // write addrs are +1 to the read base
#define SoundLow $3FFD00 // sound buffer start address
#define snd2MemTop $300 // SoundLow to Memtop
#define PWMBuffer $3FFD01 // PWM bytes are low bytes
#define pwm2MemTop $2FF // PWMBuffer to MemTop
// === Video Parameters ===
#define ScreenLow $3FA700 // top of screen screen address
#define scrn2MemTop $5900 // ScreenBase to Memtop
// === Hardware Base Addresses ===
#define romBSize $20000 // 128K bytes in ROM $0075
#define ROMStart $400000 // starting address of ROM code
#define DBase $DFE1FF // disk address base
// === System Software Information ===
#define bufWorldSize (scrn2MemTop) // total size of the BufPtr world
#define oneSecConst 2 // gets converted to $20000 for onesec constant
#define numOsTrap 256 // number of os traps
#define ToolTable $0C00 // start of toolbox trap table
#define numTbTrap 512 // number of toolbox traps
#define numTrapMask (numTbTrap-1) // mask for number of tb traps
#define HeapStart $1400 // Mac Plus starting point
#define defSysHeap $B700 // Default size of the system heap
#define nDfltStackSize $2000 // Default stack size
#define oneSec 95528 // looptimes *** patch only ***
#define halfSec (onesec/2) // *** patch only ***
#define stlDelay $30 // default bus settle delay *** patch only ***
#define ROMDoEject $40001E // jump to DoEject utility *** patch only ***
#define dACKRd $200 // offset of psuedo-DMA - READ *** patch only ***
//=======================================;
// Macintosh SE Hardware Information ;
//=======================================;
#define hwCfgBits (hwCmSCSI|hwCmClock|hwCmADB)
#define machine 2
#define rom85Bits $7F // New ROMs, No Power Off.
// === Interrupt Masks ===
#define hiIntMask $0700 // programmer switch only
#define sccIntMask $0200 // SCC interrupt Level <1.5>
#define sccEnblMask $F9FF // mask to enable SCC interrupts
#define viaIntMask $0100 // mask for VIA (and VBL) interrupts
#define loIntMask $0100
// === VIA1 BUFFER A ===
//vSound EQU $7 ; sound volume bits (0..2)
//vSync EQU 3 ; Synchronous modem
#define vDriveSel 4 // int drive select (lower drive when 1)
//vHeadSel EQU 5 ; head select line for Sony
#define vPage2 6 // select video page 2 if 0
//vSCCWrReq EQU 7 ; SCC write/request line
#define vAOut ((vSound)|\
(1<<vSync)|\
(1<<vDriveSel)|\
(1<<vHeadSel)|\
(1<<vPage2)|\
(0<<vSCCWrReq))
#define vAInit ((1)|\
(1<<vSync)|\
(0<<vDriveSel)|\
(1<<vHeadSel)|\
(1<<vPage2)|\
(0<<vSCCWrReq))
// === VIA1 BUFFER B ===
//vRTCData EQU 0 ; real time clock data
//vRTCClk EQU 1 ; real time clock clock pulses
//vRTCEnb EQU 2 ; clock enable (0 for enable)
//vFDBInt EQU 3 ; Front Desk bus interrupt
//vFDesk1 EQU 4 ; Front Desk bus state bit 0
//vFDesk2 EQU 5 ; Front Desk bus state bit 1
#define vSCSIMask 6 // SCSI IRQ mask
#define vH4 (vSCSIMask) // SCSI IRQ mask (was horiz. sync)
//vSndEnb EQU 7 ; /sound enable (reset when 1)
#define vBOut ((1<<vRTCData)|\
(1<<vRTCClk)|\
(1<<vRTCEnb)|\
(0<<vFDBInt)|\
(1<<vFDesk1)|\
(1<<vFDesk2)|\
(1<<vSCSIMask)|\
(1<<vSndEnb) )
#define vBInit ((1<<vRTCData)|\
(1<<vRTCClk)|\
(1<<vRTCEnb)|\
(0<<vFDBInt)|\
(1<<vFDesk1)|\
(1<<vFDesk2)|\
(1<<vSCSIMask)|\
(1<<vSndEnb))
// === Hardware Base Addresses ===
#define VBase $EFE1FE // VIA base address
#define AVBufA (VBase+vBufA) // VIA buffer A
#define AVBufB (VBase+vBufB) // VIA buffer B
#define SCCRBase $9FFFF8 // SCC base read address
#define SCCWBase $BFFFF9 // SCC base write address
#define sccWrite (SCCWBase-SCCRBase) // general offset for write from read
#define SCSIRd $5FF000 // base addr SCSI interface - READ
#define SCSIWr $5FF001 // base addr SCSI interface - WRITE
#define MacSCSIBase $5FF000 // base addr SCSI READ interface
#define MacSCSIDMA $5FF200 // base addr SCSI DMA
#define MacSCSIHsk $5FF200 // base addr SCSI handshake
#define wrOffs (SCSIWr-SCSIRd) // write addrs are +1 to the read base
#define SoundLow $3FFD00 // sound buffer start address
#define snd2MemTop $300 // SoundLow to Memtop
#define PWMBuffer $3FFD01 // PWM bytes are low bytes
#define pwm2MemTop $2FF // PWMBuffer to MemTop
// === Video Parameters ===
#define ScreenLow $3FA700 // top of screen screen address
#define scrn2MemTop $5900 // ScreenBase to Memtop
// === Hardware Base Addresses ===
#define romBSize $40000 // 256K bytes in present ROM
#define ROMStart $400000 // starting address of ROM code
#define DBase $DFE1FE // disk address base
// === System Software Information ===
#define bufWorldSize (scrn2MemTop) // total size of the BufPtr world
#define oneSecConst 2 // gets converted to $20000 for onesec constant
#define numOsTrap 256 // number of os traps
#define ToolTable $0E00 // start of toolbox trap table
#define numTbTrap 512 // number of toolbox traps
#define numTrapMask (numTbTrap-1) // mask for number of tb traps
#define HeapStart $1600 // Aladdin starting point
#define defSysHeap $18000 // Default size of the system heap
#define nDfltStackSize $2000 // Default stack size
//===========================================;
// Macintosh Portable Hardware Information ;
//===========================================;
#define hwCfgBits (hwCmSCSI|hwCmClock|hwCmADB|hwCbPwrMgr) // <2.8>
#define machine 3
#define rom85Bits $7F // New ROMs, No Power Off.
// === Interrupt Masks ===
#define hiIntMask $0700 // programmer switch only
#define sccIntMask $0200 // SCC interrupt Level <1.5>
#define sccEnblMask $F9FF // mask to enable SCC interrupts
#define viaIntMask $0100 // mask for VIA (and VBL) interrupts
#define loIntMask $0100
// === VIA1 BUFFER A ===
// 68000 <-> PowerMgr data bus
#define vAIn $00 // VBufA output bits (all inputs)
#define vAOut $FF // VBufA output bits (all outputs)
#define vAInit $00 // VBufA initial values
// === VIA1 BUFFER B ===
#define vPMreq 0 // Power manager handshake request
#define vPMack 1 // Power manager handshake acknowledge
#define vTestJ 2 // Test jumper
//vSync EQU 3 ; Synchronous modem
#define vDriveSel 4 // int drive select (lower drive when 1)
//vHeadSel EQU 5 ; head select line for Sony
#define vStereo 6 // Stereo sound enable
//vSCCWrReq EQU 7 ; SCC write/request line (input)
//vSndEnb EQU 7 ; /sound enable (reset when 1) (output)
#define vBOut ((1<<vPMreq)|\
(0<<vPMack)|\
(0<<vTestJ)|\
(1<<vSync)|\
(1<<vDriveSel)|\
(1<<vHeadSel)|\
(0<<vStereo)|\
(1<<vSndEnb))
#define vBInit ((1<<vPMreq)|\
(1<<vPMack)|\
(1<<vTestJ)|\
(1<<vSync)|\
(1<<vDriveSel)|\
(0<<vHeadSel)|\
(1<<vStereo)|\
(1<<vSndEnb))
#define vBufD (vBufB) // disk head select is buffer B
// === Hardware Base Addresses ===
#define VBase $F70000 // VIA base address
#define AVBufA (VBase+vBufA) // VIA buffer A
#define AVBufB (VBase+vBufB) // VIA buffer B
#define SCCRBase $FD0000 // SCC base read address
#define SCCWBase $FD8000 // SCC base write address
#define sccWrite (SCCWBase-SCCRBase) // general offset for write from read
#define SCSIRd $F90000 // base address of SCSI interface - READ
#define SCSIWr $F90001 // base address of SCSI interface - WRITE
#define MacSCSIBase $F90000 // base address of SCSI READ interface
#define MacSCSIDMA $F90200 // base address of SCSI DMA
#define MacSCSIHsk $F90200 // base address of SCSI handshake
#define wrOffs (SCSIWr-SCSIRd) // write addrs are +1 to the read base
#define SndBase $FB0000 // sound chip's base address
#define MapperBase $FC0000 // Mapper RAM base address
#define RAMconfigBase $FE0200 // Internal/external RAM control register
#define RAMconfigInit $0006 // Init test register <v2.6>
// === Video Parameters ===
#define ScreenLow $FA8000 // top of screen screen address
#define hcVideoSize $8000 // 32k of video memory
#define HcVideoStart (ScreenLow)
#define HcVideoEnd (HcVideoStart+hcVideoSize)
#define NTSCMaxX 512 // NTSC output is narrow
#define NTSCOffset 8 // and centered
#define LCDmode 0 // Normal built in screen
#define Mac2mode 1 // Custom screen for Mac2
#define NTSCmode 2 // NTSC output for Topanga
// === Hardware Base Addresses ===
#define romBSize $40000 // 256K bytes in present ROM
#define ROMStart $900000 // starting address of ROM code
#define DBase $F6E1FF // disk address base
#define AccessBase $FC0200 // SLIM card DTACK counter load address (what a mouthful)
#define SLIMinserted 3 // SLIMs inserted bit <v2.6>
// === System Software Information ===
#define snd2MemTop $300 // SoundLow to Memtop
#define pwm2MemTop $2FF // PWMBuffer to MemTop
#define bufWorldSize (snd2MemTop) // total size of the BufPtr world
#define oneSecConst 2 // gets converted to $20000 for onesec constant
#define numOsTrap 256 // number of os traps
#define ToolTable $0E00 // start of toolbox trap table
#define numTbTrap 1024 // number of toolbox traps
#define numTrapMask (numTbTrap-1) // mask for number of tb traps
#define HeapStart $1E00 // Portable starting point <1.2>
#define DefSysHeap $18000 // Default size of the system heap
#define NDfltStackSize $2000 // Default stack size
//===================================================;
// Universal 16 bit Macintosh Hardware Information ;
//===================================================;
// === Interrupt Masks ===
#define hiIntMask $0700 // programmer switch only
#define sccIntMask $0200 // SCC interrupt Level <1.5>
#define sccEnblMask $F9FF // mask to enable SCC interrupts
#define viaIntMask $0100 // mask for VIA (and VBL) interrupts
#define loIntMask $0100
// === VIA1 BUFFER A ===
//vSound EQU $7 ; sound volume bits (0..2)
#define vSndPg2 3 // select sound page 2 if 0
//vSync EQU 3 ; Synchronous modem
//vOverlay EQU 4 ; overlay bit (overlay when 1)
//vDriveSel EQU 4 ; int drive select (lower drive when 1)
//vHeadSel EQU 5 ; head select line for Sony
#define vPage2 6 // select video page 2 if 0
//vSCCWrReq EQU 7 ; SCC write/request line
// === VIA1 BUFFER B ===
//vRTCData EQU 0 ; real time clock data
//vRTCClk EQU 1 ; real time clock clock pulses
//vRTCEnb EQU 2 ; clock enable (0 for enable)
#define vSW 3 // mouse switch (0 when down)
//vFDBInt EQU 3 ; Front Desk bus interrupt
#define vX2 4 // mouse X level
//vFDesk1 EQU 4 ; Front Desk bus state bit 0
#define vY2 5 // mouse Y level
//vFDesk2 EQU 5 ; Front Desk bus state bit 1
#define vH4 6 // horizontal sync
#define vSCSIMask 6 // SCSI IRQ mask
//vSndEnb EQU 7 ; /sound enable (reset when 1)
#define vPMreq 0 // Power manager handshake request
#define vPMack 1 // Power manager handshake acknowledge
#define vTestJ 2 // Test jumper
//vSync EQU 3 ; Synchronous modem
//vDriveSel EQU 4 ; int drive select (lower drive when 1)
//vHeadSel EQU 5 ; head select line for Sony
#define vStereo 6 // Stereo sound enable
//vSCCWrReq EQU 7 ; SCC write/request line (input)
// === VIA1 BUFFER A/B ===
//vSync EQU 3 ; Synchronous modem <3.1>
#define vDriveSel 4 // int drive select (lower drive when 1) <3.1>
//vHeadSel EQU 5 ; head select line for Sony <3.1>
//vSCCWrReq EQU 7 ; SCC write/request line <3.1>
// === Hardware Base Addresses ===
#define wrOffs 1 // write addrs are +1 to the read base
// === System Software Information ===
#define numOsTrap 256 // number of os traps
#define ToolTable $0E00 // start of toolbox trap table
#define numTbTrap 1024 // number of toolbox traps
#define numTrapMask (numTbTrap-1) // mask for number of tb traps
#define HeapStart $1E00 // Laguna starting point <1.2>
#define DefSysHeap $18000 // Default size of the system heap
#define NDfltStackSize $2000 // Default stack size
#endif // ForAmusementOnly
#define HardwarePrivate 1
#endif // __INCLUDINGHARDWAREPRIVATEEQU__