supermario/base/SuperMarioProj.1994-02-09/Toolbox/ControlMgr/ButtonCDEF.a
2019-06-29 23:17:50 +08:00

955 lines
34 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;
; File: ButtonCDEF.a
;
; Contains: Standard Button Definition Procedure for the MacIntosh Control Manager
; This file contains the control definition procedures that define
; the standard "button" type controls. These include PushButtons,
; CheckBoxes, and a checkBox variant called RadioButton.
;
; Written by: Andy Hertzfeld August, 1982
;
; Copyright: © 1982-1992 by Apple Computer, Inc., all rights reserved.
;
; This file is used in these builds: Mac32 HcMac MacPP BigBang Sys606
;
; Change History (most recent first):
;
; <SM2> 10/22/92 CSS Change short branches to word branches.
; <14> 4/11/91 gbm csd, KSM, BRC#86464: Fix many references to the control
; rectangle which are invalid because the control handle can be
; unlocked.
; <13> 3/4/91 dba dty: get rid of SysVers conditionals
; <12> 12/14/90 VL (ksm) Use PaintRoundRect instead of PaintRect for dithering
; text. Also, changed PenMode to TextMode since grayishTextOr is a
; text mode.
; <11> 8/23/90 SAM Removed the MoveHHi from the DrawPBut routine so that MacApp
; will work (it assumes that handles will be ok across calls to
; DrawControl -- idiots!)
; <10> 8/17/90 dvb Change grayish textMode pnMode to txMode
; <9> 8/13/90 VL Fixed test for portVersion to avoid trashing portVersion's
; value.
; <8> 8/2/90 VL Replaced SysVers switch with UseTrueGrayText (for ROM build).
; <7> 8/1/90 VL Make text to be drawn in TrueGray when disabled (in a color
; grafport).
; <6> 6/14/90 DDG NEEDED FOR SIXPACK: Moved the control manager handle with
; _MoveHHi before we lock it down while we are drawing. This
; should prevent out-of memory problems.
; <5> 5/29/90 DDG NEEDED FOR SIXPACK: Added the proper tag to the previous
; comment.
; <4> 5/29/90 DDG NEEDED FOR SIXPACK: Fix a bug where the button title is left
; unlocked for the duration of the drawing call.
; <3> 5/1/90 DDG Removed the temporary conditionals that I added for Sys605.
; <2> 3/2/90 DDG Adding conditionals for Sys605
; <1.4> 11/17/89 dba took out checks for 64K ROMs
; <1.3> 8/22/89 SES removed references to nFiles; updated equates accordingly
; <1.2> 2/9/89 EMT added new messages for 32-bit clean Control Manager.
; <1.1> 11/11/88 CCH Fixed Header.
; <1.0> 11/9/88 CCH adding to EASE.
; <•1.1> 9/23/88 CCH Got rid of inc.sum.d and empty nFiles
; <1.0> 2/12/88 BBM Adding file for the first time into EASE…
; <C948> 11/8/87 DAF Updated romres sources from system disk sources
; SMAB156> 3/30/87 DAF Tested ROM version before using teSysJust.
; <C818> 2/14/87 DAF Converted nuMac PaintRoundRgn to be unified with other Macs
; Erase stopped setting backColor when drawing text.
; <C700> 1/26/87 DAF Universal version of ButtonCDEF.a (version 10)
; <C637> 1/14/87 DAF Changed textMode back to srcOR from srcCopy (sigh...)
; <C560> 12/21/86 DAF Added Mark Davis code to allow reversed checkmarks for intl
; <C424> 11/18/86 DAF converted a BSET/BCLR to an HLock/HUnlock, in CalcPBut
; <C407> 11/16/86 DAF changed textMode (again) to srcCopy, as per Carys
; recommendation
; <C203> 10/8/86 DAF updated color support on nuMac for RGBColors changed textMode to
; srcOr.
; <C59> 6/30/86 DAF added color support for nuMac (mucho chango)
; <v4> 8/26/85 EHB made variable sized fonts work (ROM85>0 only)
; <v3> 5/20/85 EHB implemented Multi-Line buttons
; <v2> 5/16/85 EHB only return "254" if point in control!
; 3/12/85 JTC changed occurrences of LGlobals to GrafGlobals
; 2/14/85 JTC added res name
; 1/14/85 JTC convert to MDS
; 12/31/83 AJH made text of checkBox/radioButtons grayed out if disabled
; 10/17/83 AJH back to "gray-out" button disabling
; 10/12/83 AJH changed button disabling
; 9/27/83 AJH made variants > 7 not force the system font
; 8/29/83 AJH fixed scrambling bug in CalcPBut
; 6/7/83 AJH fixed scrambling bug, changed check draw for new QuickDraw
; 4/4/83 AJH made it force size 12 for text
; 4/1/83 AJH made it use hardwired gray
; 3/27/83 AJH made it respect initial clip in button drawing
; 3/11/83 AJH fixed up check box drawing
; 12/28/82 AJH Put button definitions in their own file
; 11/16/82 AJH Made branch tables offset based
; 11/14/82 AJH Improved PushButton roundness scaling; removed box in arrowBits
; 10/17/82 AJH Made controlProcs preserve A1
; 10/10/82 AJH Converted for QuickDraw Trap Interface
; 10/5/82 AJH Fixed checkBox flashing, added code saving optimizations
; 10/3/82 AJH Fixed bug in scrollBar positioning -- wasnt ctl relative
; 9/29/82 AJH Added CheckBox control definition procedure
; 8/29/82 AJH Added "255" hiliting,
; 8/25/82 AJH Fixed corner-clobber bug in pushButProc
; 8/22/82 AJH Added clipping, centering to PushButProc
;
; To Do:
;
PRINT PUSH,OFF
LOAD 'StandardEqu.d'
INCLUDE 'ColorEqu.a'
PRINT POP
;----------------------------------------------------------------------------------------------------
CDEF0 PROC EXPORT
; FUNCTION PushButProc( selector: INTEGER; 18
; theControl: ControlHandle; 14
; message: INTEGER; 12
; param: LongInt): LongInt; 8 : 20
;
; PushButProc is the control definition procedure for simple pushButtons, one of the
; standard control types supported by the user interface toolBox.
; And a stack frame definition
CtlHndl EQU 14 ;incoming control handle param <C59/30Jun86> DAF
SavePen EQU -20
Align EQU -21 ;a dead byte for IsColor <C700/26Jan87> DAF
IsColor EQU -22 ;do we have colorQD and toolbox [boolean] <C700/26Jan87> DAF
IndicatorRect EQU -30
AuxCtlHndl EQU -34 ;handle of auxCtl ColorTable <C59/30Jun86> DAF
AuxCtlPtr EQU -38 ;ptr to auxCtl ColorTable <C59/30Jun86> DAF
ContentRGB EQU -44 ;window content color <C59/30Jun86> DAF
SavFgCol EQU -50 ;window ports RGBFgColor <Cxxx/06Oct86> DAF
SavBkCol EQU -56 ;window ports RGBBkColor <Cxxx/06Oct86> DAF
useGrayText EQU -58
FrameSize EQU -58
BRA.S @0 ; skip header
; standard header
DC.W 0 ; flags
DC.L ('CDEF')
DC.W 0
DC.W 11 ; version #
@0
LINK A6,#FrameSize ; set up a stack frame to address parameters <C59/30Jun86> DAF
MOVEM.L D3-D7/A1-A4,-(SP) ; save work registers
;
; buttons only handle messages 0,1,2,10,11 <1.2>
;
CMP.W #calcCtlMsg,12(A6) ; inspect message value <1.2>
BLS.S @MsgOK ; if <2, its OK <1.2>
CMP.W #calcWholeCtlMsg,12(A6) ; <1.2>
BEQ.S @MsgOK ; 10 is OK too <1.2>
CMP.W #calcThumbCtlMsg,12(A6) ; <1.2>
BNE DoneP1 ; And 11 <1.2>
@MsgOK
;
; save the penState and set it our way
;
PEA SavePen(A6) ; push pointer to savePenState
_GetPenState ; remember current penState
_PenNormal ; set the pen the way we want it
; Determine type of system. We need to know if we have color QuickDraw and a color
; window manager port.
CMP.W #$3FFF,ROM85 ; do we have color QD?
SLS IsColor(A6) ; set boolean depending on color or B&W system
BHI @BWSys ; no, this system has B&W QD <SM2> CSS
; save the current ports colors and textMode <C59/30Jun86> DAF
MOVE.L GrafGlobals(A5),A0 ; get pointer to grafGlobals <C407/16Nov86> DAF
MOVE.L thePort(A0),A0 ; get pointer to thePort <C407/16Nov86> DAF
MOVE.W txMode(A0),-(SP) ; save the current text mode <C407/16Nov86> DAF
MOVE.W #srcOR,-(SP) ; push text mode <C637/16Nov86> DAF
_TextMode ; <C407/16Nov86> DAF
PEA SavFgCol(A6) ; save foreColor
_GetForeColor ;
PEA SavBkCol(A6) ; save backColor too
_GetBackColor ;
;
; get the CtlAuxRec for this guy and lock its colortable <C59/30Jun86> DAF
;
CLR.L -(SP) ; return the handle here
CLR.B -(SP) ; space for boolean func return
MOVE.L CtlHndl(A6),-(SP) ; push the control handle
PEA 6(SP) ; push a pointer to placeholder
_GetAuxCtl ; get its auxRec
ADDQ #2,SP ; dont need boolean result
MOVE.L (SP)+,A0 ; get auxCtl handle
MOVE.L (A0),A0 ; a pointer to the auxCtlRec
MOVE.L acCTable(A0),A0 ; get colortables handle <1.3>
MOVE.L A0,AuxCtlHndl(A6) ; save the handle
_HLock ; lock the handle
MOVE.L (A0),AuxCtlPtr(A6) ; save a pointer
;
; get the WinAuxRec that this control is in and copy its content color to
; the stack frame.
;
CLR.L -(SP) ; make a placeholder for a handle
CLR.B -(SP) ; room for a boolean result
MOVE.L CtlHndl(A6),A0 ; get the controlHandle again
MOVE.L (A0),A0 ; get a pointer
MOVE.L contrlOwner(A0),-(SP) ; push the owning window pointer
PEA 6(SP) ; pointer to the placeholder
_GetAuxWin ; get the window auxRec
ADDQ #2,SP ; bag the boolean
MOVE.L (SP)+,A0 ; get the WinAuxRec handle
MOVE.L (A0),A0 ; handle->ptr
MOVE.L awCTable(A0),A0 ; get the colortable handle <1.3>
MOVE.L (A0),A0 ; handle->ptr
MOVE.W CTSize(A0),D0 ; get the table count
MULU.W #8,D0 ; get a table index
@1
TST.W CTTable+value(A0,D0) ; is it wContentColor (=0)?
BEQ.S @2 ;
SUBQ #8,D0 ; move to previous colorSpec
BGE.S @1 ; and loop back
CLR.L D0 ; if not found, just use the first one
@2
MOVE.L CTTable+rgb(A0,D0),ContentRGB(A6) ; copy the color over
MOVE.W CTTable+rgb+4(A0,D0),ContentRGB+4(A6) ;
@BWSys
;
; fetch the parameters into registers
;
LEA 8(A6),A0 ; get ptr to first parameter
MOVE.L (A0)+,D3 ; get param in D3
MOVE.W (A0)+,D0 ; get message
MOVE.L (A0)+,A3 ; get the control handle
MOVE.W (A0)+,D6 ; get selection index
MOVE.W D6,D7 ; remember raw selection code
AND #7,D6 ; strip high part of selection code
CLR.L (A0) ; clear out function result
MOVE.L (A3),A0 ; get control pointer in A0
;
; case out on the message number
;
msgAdjust EQU calcWholeCtlMsg-calcCtlMsg-1 ; So that 10 becomes 3, 11 becomes 4 <1.2>
CMP.W #calcCtlMsg, D0 ; Does message need adjusting? <1.2>
BLS @LoMsg ; Dont adjust if not. <1.2>
SUBQ.W #msgAdjust, D0 ; Adjust message for address calculation <1.2>
@LoMsg
ADD D0,D0 ; double for word index
LEA GoPushBut,A1 ; get table address
ADD 0(A1,D0),A1 ; compute dispatch address
JSR (A1) ; dispatch to appropriate routine
;
; clean up color stuff
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor1 ; if on B&W, then skip
MOVE.L AuxCtlHndl(A6),A0 ; unlock the CDEF
_HUnlock
PEA SavFgCol(A6) ; restore the port colors
_RGBForeColor ;
PEA SavBkCol(A6) ;
_RGBBackColor ;
_TextMode ; restore the textMode <C407/16Nov86> DAF
@noColor1 ; END OF A COLOR-ONLY SECTION
;
; restore original pen state
;
PEA SavePen(A6) ; push savePenState
_SetPenState ; restore original pen state
;
; were done -- restore registers and return to caller
;
DoneP1
MOVEM.L (SP)+,D3-D7/A1-A4 ; restore work registers
UNLK A6 ; unlink stack frame
TenBytExit MOVE.L (SP)+,A0 ; get return address
ADD #12,SP ; strip parameters
JMP (A0) ; return to caller
;
; PushButProc dispatch table -- entries must be long branches!
;
GoPushBut
DC.W DrawPBut-GoPushBut ; draw is message 0
DC.W HitPBut-GoPushBut ; hit test is message 1
DC.W CalcPBut-GoPushBut ; calc regions is message 2
DC.W CalcWholePBut-GoPushBut ; calc whole regions is message 10 <1.2>
DC.W CalcThumbPBut-GoPushBut ; calc thumb regions is message 11 <1.2>
ButStub RTS
; SetUpColor takes a window part identifier in D0, finds the corresponding
; part in the AuxWinTable (the part code is in the .value field) and returns
; a pointer to its RGB on the stack. If the requested part is not found,
; the first color table element is used (Id use frameColor, but that might
; not be there!). Trashes A0/D0.
SetUpColor
MOVE.L D1,-(SP) ; save a register
MOVE.L AuxCtlPtr(A6),A0 ; get the color table pointer
MOVE.W CTSize(A0),D1 ; get the color table size
MULU #8,D1 ; convert to color table index
LegalIndex
CMP.W CTTable+value(A0,D1),D0 ; is this the one?
BEQ.S FoundIt ; if equal, then done
SUB.W #8,D1 ; try the previous one
BGE.S LegalIndex ; loop while index positive
MOVEQ #0,D1 ; OK, use the first one
FoundIt
LEA CTTable+rgb(A0,D1),A0 ; get the address of the color to use
MOVE.L A0,D0 ; well need A0 in a second
MOVE.L (SP)+,D1 ; restore the register
MOVE.L (SP)+,A0 ; get the return address
MOVE.L D0,-(SP) ; push the rgb addr on the stack
JMP (A0) ; return to caller
;
; DrawPBut draws the pushButton
;
DrawPBut
TST.B ContrlVis(A0) ; is it visible?
BEQ.S ButStub ; if not, were done
;
; calculate roundness as function of rectangle size
;
BSR RoundCalc ; compute roundNess factor in D4
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor2 ; if on B&W, then skip
;
; if pushbutton, paint bk to body color; if checkmark then erase to window content <C59/30Jun86> DAF
;
@9 TST.B D6 ; is it a pushButton?
BEQ.S @4 ;
; set the window content color to the back for the eraseRRect <C59/30Jun86> DAF
PEA ContentRGB(A6) ; push the pointer to content color
BRA.S @5
; set the body color for button <C59/30Jun86> DAF
@4
MOVE.L (A3),A0 ; get control rec pointer
MOVE.B contrlHilite(A0),D0 ; get the hilite byte
SUBQ.B #1,D0 ; make 0->$FF
CMP.B #$FD,D0 ; is the control hilited?
BHS.S @8 ; no, so continue
MOVEQ #cTextColor,D0 ; if it is, paint the button in text color
BRA.S @0
@8 MOVEQ #cBodyColor,D0 ; if its not, then paint body color
@0 BSR.S SetUpColor ; get info on the stack
;
; erase the bounding rectangle (if necessary)
;
@5
_RGBBackColor ; set it
MOVE.L (A3),A0 ; get controlHandle again
@NoColor2 ; END OF A COLOR-ONLY SECTION
LEA ContrlRect(A0),A4 ; get pointer to bounding rect
TST.B D6 ; is it a pushButton?
BEQ.S EraseCBound ; push buttons are always erased
TST.B D3 ; draw all?
BNE.S SkipCErase ; if not, dont bother to erase
;
EraseCBound
MOVE.L A4,-(SP) ; push rect
MOVE.L D4,-(SP) ; push rounding factor
_EraseRoundRect ; paint it the background color
;
; save the current font and force the system font
;
SkipCErase MOVE.L GrafGlobals(A5),A0 ; get GrafGlobals base
MOVE.L ThePort(A0),A0 ; get current port
MOVE.L txFont(A0),-(SP) ; remember the font,face
MOVE.W txSize(A0),-(SP) ; remember the size
SUBQ #8,D7 ; was code 8 or greater?
BGE.S @gotFont ; if so, use windows font
CLR.L txFont(A0) ; force system font, normal face
MOVE.W SysFontSize,D0 ; get default size <EHB 26Aug85>
BNZ.S @gotSize ; => its 0! <EHB 26Aug85>
MOVE.B FMDefaultSize,D0 ; get default size <EHB 26Aug85>
@gotSize
MOVE.W D0,txSize(A0) ; set size of font <EHB 26Aug85>
@gotFont
MOVE.L ClipRgn(A0),-(SP) ; push the current clipRgn handle
; save old clip region and clip to the bounding rectangle sected with oldClip
CLR.L -(SP) ; make space for region handle
_NewRgn ; allocate a region
MOVE.L (SP),A2 ; remember region but leave on stack
_GetClip ; remember the current clipRgn
MOVE.L (A3),A0 ; get control pointer
PEA ContrlRect(A0) ; push pointer to its bounding rect
_ClipRect ; make that the clipping region
MOVE.L A2,-(SP) ; push the old ClipRgn
MOVE.L 4(SP),-(SP) ; the answer goes into current clip
_SectRgn ; intersect new and old
; Save off some registers for mondo button title calculations, then
; set them up for our use
MOVE.L A3,A0 ; copy control handle to A0 for memory calls
_HGetState
MOVE.L D0,-(SP) ; save the state of the control handle for later
;;; _MoveHHi ; move it up, before we lock it down <11> SAM (Removed)
_HLock ; lock it down
MOVEM.L D4/A2-A3,-(SP) ; save registers <EHB 20-May-85>
MOVE.L (A3),A0 ; get pointer to control
LEA contrlTitle(A0),A2 ; get title into A2
LEA contrlRect(A0),A4 ; get rect into A4 <EHB 20-May-85>
MOVEQ #0,D7 ; <EHB 20-May-85>
MOVE.B (A2),D7 ; get string length into D7 <EHB 20-May-85>
BEQ NoTitle ; quick check for nothing <EHB 20-May-85>
; now count the number of lines in the title. Lines are separated by CRs
MOVEQ #0,D4 ; save number of lines in D4 <EHB 20-May-85>
@2
ADDQ #1,D4 ; count next line <EHB 20-May-85>
BSR Pt2Next ; point to next line (index in D7) <EHB 20-May-85>
TST.B D7 ; D7 < 0 if done <EHB 20-May-85>
BPL.S @2 ; => get next line <EHB 20-May-85>
MOVE.B (A2),D7 ; get string length back <EHB 20-May-85>
; now get a font info record on stack, pointer to it in A3
SUBQ #8,SP ; make room for 4 INTEGERS <EHB 20-May-85>
MOVE.L SP,A3 ; save pointer in A3 <EHB 20-May-85>
MOVE.L A3,-(SP) ; push pointer to record <EHB 20-May-85>
_GetFontInfo ; and fill the record <EHB 20-May-85>
; Set up D5 to point to the baseline of the last line
BSR GetHeight ; get height of line into D0 <EHB 20-May-85>
MULU D4,D0 ; #lines times height <EHB 20-May-85>
MOVE.W bottom(A4),D1 ; get bottom of rect <EHB 20-May-85>
MOVE.W D1,D5 ; D5 will be baseline <EHB 20-May-85>
SUB.W top(A4),D1 ; get height of rect <EHB 20-May-85>
SUB.W D0,D1 ; get unused space <EHB 20-May-85>
ASR.W #1,D1 ; and DIV by 2 <EHB 20-May-85>
SUB.W D1,D5 ; move up from bottom <EHB 20-May-85>
SUB.W leading(A3),D5 ; to bottom of descender <EHB 20-May-85>
SUB.W descent(A3),D5 ; to first baseline <EHB 20-May-85>
DoNextLine
; get the width of the current line into D0
BSR Pt2Next ; next line in D7, len in D3 <EHB 20-May-85>
CLR.W -(SP) ; make room for result <EHB 20-May-85>
MOVE.L A2,-(SP) ; push title pointer <EHB 20-May-85>
MOVE.W D7,D0 ; get our offset into string <EHB 20-May-85>
ADDQ.B #2,D0 ; bump past length (or CR) <EHB 20-May-85>
MOVE.W D0,-(SP) ; push true offset into string <EHB 20-May-85>
MOVE.W D3,-(SP) ; push number of bytes <EHB 20-May-85>
_TextWidth ; get the strings width <EHB 20-May-85>
MOVE.W (SP)+,D0 ; and save result in D0 <EHB 20-May-85>
; if its a checkbox, dont center it, just move to right a little
TST.B D6 ; is it a check box?
BEQ.S ElCentro ; => no, go center the string <EHB 20-May-85>
; adjust positioning for push button
tst.w teSysJust ; right to left? <MED 27-Aug-86>
beq.s LeftBox ; no, normal case <MED 27-Aug-86>
RightBox
MOVE.W right(A4),D1 ; get the right edge <MED 27-Aug-86>
SUB.W left(A4),D1 ; get the width <MED 27-Aug-86>
SUB.W D0,D1 ; subtract strings width <MED 27-Aug-86>
sub.w #18,d1 ; subtract room for box <MED 27-Aug-86>
ADD.W left(A4),D1 ; and add into left <MED 27-Aug-86>
BRA.S DrawBTitle ; back to common code <MED 27-Aug-86>
LeftBox
MOVE.W Left(A4),D1 ; get the left edge
ADD.W #18,D1 ; leave room for check box
BRA.S DrawBTitle ; back to common code
ElCentro
; center the line in the rect
MOVE.W right(A4),D1 ; get the right edge
SUB.W left(A4),D1 ; get the width
SUB.W D0,D1 ; subtract strings width
ASR.W #1,D1 ; get centering offset
ADD.W left(A4),D1 ; and add into left
DrawBTitle
MOVE.W D1,-(SP) ; push horizontal position
MOVE.W D5,-(SP) ; and vertical position <EHB 20-May-85>
_MoveTo ; move the pen there
; now that registers are free, push colors on stack <C59/30Jun86> DAF
MOVE.L GrafGlobals(A5),A0 ; Save the pen mode
MOVE.L thePort(A0),A0 ;
MOVE.W txMode(A0),-(SP) ; <12>
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @notColor ; no, skip the gray text checking stuff totally
MOVE.W portVersion(A0),D0 ; get portVersion into D0 for comparison
AND.W #$C000,D0 ; are we using a color grafport?
SNE useGrayText(A6) ; yes, set boolean useGrayText to true for future reference
BRA.S @doneCheckingForGrayText
@notColor ;
MOVE.B #0,useGrayText(A6) ; set boolean useGrayText to false
@doneCheckingForGrayText
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor4 ; if on B&W, then skip
MOVE.L CtlHndl(A6),A0 ; get the control handle (not A3 in this section) <DAF 29Apr86>
MOVE.L (A0),A0 ; get control pointer
MOVE.B ContrlHilite(A0),D0 ; need to handle the case of 254/5 hiliting
BEQ.S @1 ; skip if hiliteValue == 0
CMP.B #$FE,D0 ; Is the button hilited?
BHS.S @Hilited ; skip if hiliteValue > 254 (i.e. disabled)
TST.B D6 ; Is it a check box or radio button?
BNE.S @1 ; yes => Want to set the forecolor to CTextColor in 7.0
MOVE.W #cBodyColor,D0 ; no => use cBodyColor as ForeColor in 6.0
BRA.S @4 ; (because BackColor is cTextColor)
@Hilited ;
TST.B useGrayText(A6) ; can we use GrayText?
BEQ.S @1 ;
MOVE.W #grayishTextOr,-(SP) ; yes => set the pen mode to grayishTextCopy
_TextMode ;
@1
MOVE.W #cTextColor,D0 ; use cTextColor as ForeColor
@4
BSR SetUpColor ; deposit appropriate values on stack
_RGBForeColor
@NoColor4
MOVE.L A2,-(SP) ; point to string <EHB 20-May-85>
MOVE.W D7,D0 ; get our offset into string <EHB 20-May-85>
ADDQ.B #2,D0 ; bump past length (or CR) <EHB 20-May-85>
MOVE.W D0,-(SP) ; push true offset into string <EHB 20-May-85>
MOVE.W D3,-(SP) ; push length in bytes <EHB 20-May-85>
_DrawText ; this is where we draw the line
_TextMode ; <12>
; bump baseline point up to next line, test for end
BSR GetHeight ; get line height into D0 <EHB 20-May-85>
SUB.W D0,D5 ; go up to next base line <EHB 20-May-85>
TST.B D7 ; done yet? <EHB 20-May-85>
BPL DoNextLine ; => nope <EHB 20-May-85>
ADDQ #8,SP ; strip font record <EHB 20-May-85>
NoTitle
MOVEM.L (SP)+,D4/A2-A3 ; and all those registers <EHB 20-May-85>
MOVE.L A3,A0 ; copy control handle to A0 for HSetState
MOVE.L (SP)+,D0 ; get the state off the stack and set it back
_HSetState
; <14>
; WARNING! Setting the state of the control record handle here may leave it unlocked! Several
; references are made below to items in the control record (mostly the control rect).
; Each reference must include reloading the control record pointer from the control
; record handle contained in register a3.
;
; We now return you to your regularly scheduled program.
; <14>
; restore original font, face and size
MOVE.L GrafGlobals(A5),A0 ; get GrafGlobals base
MOVE.L ThePort(A0),A0 ; get current port
MOVE.W (SP)+,txSize(A0) ; restore the size
MOVE.L (SP)+,txFont(A0) ; restore the font,face
;
; set the pen color to FrameColor <C59/30Jun86> DAF
;
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor5 ; if on B&W, then skip
MOVEQ #cFrameColor,D0 ;
BSR SetUpColor ;
_RGBForeColor ;
@NoColor5 ; END OF A COLOR-ONLY SECTION
TST.B D6 ; is it a checkBox?
BNE PlotCheck ; if so, go draw it
move.l (a3), a0 ; get control pointer <14>
lea contrlRect(a0), a4 ; point to the control rect <14>
MOVE.L A4,-(SP) ; push the rectangle pointer
MOVE.L D4,-(SP) ; push rounding factor
_FrameRoundRect ; frame the button
;
; perform SpecialHilite if necessary
;
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor6 ; if on B&W, then skip
TST.B useGrayText(A6) ; did we use GrayText?
BNE.S @skipSpecialHilite ; yes => skip SpecialHilite since GrayText represents hilite state already
MOVE.L (A3),A0 ; get control pointer
CMP.B #$FE,ContrlHilite(A0) ; is it the special hilite state?
BHS.S SpecialHilite ; if so, go do it
@skipSpecialHilite
BRA.S @Common6 ; and continue...
@NoColor6
;
; hilite the button if necessary
;
MOVE.L (A3),A0 ; get control pointer
MOVE.B ContrlHilite(A0),D0 ; is it hilited?
BEQ.S DoneDrwBut ; if not, were done
;
TST.B useGrayText(A6) ; did we use GrayText?
BNE.S @Common6 ; yes, skip SpecialHilite since GrayText represents hilite state already
CMP.B #$FE,D0 ; is it the special hilite state?
BHS.S SpecialHilite ; if so, go do it
;
lea contrlRect(a0), a4 ; point to the control rect <14>
MOVE.L A4,-(SP) ; push rectangle
MOVE.L D4,-(SP) ; push rounding factor
_InverRoundRect ; hilite by inverting
@Common6
;
; restore original clipping region and were done
;
DoneDrwBut
_PenNormal ; set the pen back to normal
MOVE.L A2,-(SP) ; push old clip region
_SetClip ; restore it
MOVE.L A2,-(SP) ; dispose of temporary region
_DisposRgn ; de-allocate it
RTS ; all done!
;------------
; Utility Pt2Next -- Point to next line within the title
; On Entry: A2 Title pointer
; D7 offset to end of next line to do
; On Exit: D7 offset to next line-2 (D7<0 if last line)
; D3 length of next line
CR EQU $0D ; CR = carriage return
Pt2Next
MOVEQ #0,D3 ; clear out count <EHB 20-May-85>
TST.B D7 ; pointing at count? <EHB 20-May-85>
BEQ.S @2 ; => yes, a leading CR <EHB 20-May-85>
@1
CMP.B #CR,0(A2,D7) ; is char a CR? <EHB 20-May-85>
BEQ.S @2 ; => yes, all done <EHB 20-May-85>
ADDQ #1,D3 ; else bump count by one <EHB 20-May-85>
SUBQ.B #1,D7 ; and move back in string <EHB 20-May-85>
BNE.S @1 ; => not end of string <EHB 20-May-85>
@2
SUBQ.B #1,D7 ; prepare for next string <EHB 20-May-85>
RTS ; D7 < 0 if last line <EHB 20-May-85>
;------------
; Utility GetHeight -- return in D0 the height of on line
; On Entry: A3 Font Record
; On Exit: D0 Line height
GetHeight
MOVEQ #0,D0 ; clear out height <EHB 20-May-85>
ADD.W ascent(A3),D0 ; height = ascent + descent + leading <EHB 20-May-85>
ADD.W descent(A3),D0 ; <EHB 20-May-85>
ADD.W leading(A3),D0 ; <EHB 20-May-85>
RTS
; SpecialHilite handles drawing the disabled button
SpecialHilite
BSR.S DisableText
BRA.S DoneDrwBut
DisableText
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor7 ; if on B&W, then skip
TST.B D6 ; is it a pushbutton?
BNE.S @NoColor7 ; a checkbox, so go
MOVEQ #cTextColor,D0 ; set the colors apropos
BSR SetUpColor ;
_RGBForeColor ;
MOVEQ #cBodyColor,D0 ;
BSR SetUpColor ;
_RGBBackColor ;
@NoColor7 ; END OF A COLOR-ONLY SECTION
move.l (a3), a0 ; get control pointer <14>
lea contrlRect(a0), a4 ; point to the control rect <14>
MOVE.L A4,-(SP) ; push rectangle
MOVE.L #$00010001,-(SP) ; <12>
_InsetRect
MOVE.L A4,-(SP) ; push rectangle
MOVE.L D4,-(SP) ; push the rounding factor <12>
MOVE.L (A5),A0
PEA Gray(A0)
_PenPat
MOVE #patBIC,-(SP)
_PenMode
_PaintRoundRect ; gray it out <12>
_PenNormal
move.l (a3), a0 ; get control pointer <14>
lea contrlRect(a0), a4 ; point to the control rect <14>
MOVE.L A4,-(SP)
MOVE.L #$FFFFFFFF,-(SP) ; <12>
_InsetRect
RTS
; RoundCalc calculates the rounding factor in D4 based on the controls rect
RoundCalc
TST.B D6 ; is it a checkBox?
BNE.S CheckRound ; if so, special case it
;
MOVE.W ContrlRect+Bottom(A0),D4 ; get bottom coordinate
SUB.W ContrlRect+Top(A0),D4 ; figure out vertical height
LSR #1,D4 ; scale it down by a factor of 2
MOVE D4,D0 ; fill both halves with it
SWAP D4 ; get in high part
MOVE D0,D4 ; and in low part
RTS
;
CheckRound MOVEQ #0,D4 ; checkBoxes are square!
RTS
;
; HitPBut handles the button hit-test
;
HitPBut
MOVE.B ContrlHilite(A0),D4 ; get hiliteState <EHB 16-May-85>
ADDQ.B #1,D4 ; is it 255? <EHB 16-May-85>
BEQ.S @1 ; if so, skip
CLR.W -(SP) ; make room for function result
MOVE.L D3,-(SP) ; push the point
PEA ContrlRect(A0) ; push address of rect
_PtInRect ; in the rectangle?
TST.B (SP)+ ; examine result
BEQ.S @1 ; if not, were done
ADDQ.B #1,D4 ; 254 hiliting? <EHB 16-May-85>
BEQ.S Return254 ; => say it is so <EHB 16-May-85>
MOVE #inButton,22(A6) ; return that it was
TST.B D6 ; a checkBox?
BEQ.S @1 ; if not, were done
ADDQ #1,22(A6) ; if so, flag it
@1 RTS
Return254
MOVE #254,22(A6) ; indicate its 254-disabled
RTS
CalcWholePBut
CalcThumbPBut
MOVE.B #1, 23(A6) ; return 1 to show that we respond <V1.2>
;
; CalcPBut returns the bounding region of the button
;
CalcPBut
TST.B D6 ; is it a checkBox?
BNE.S CalcSquare ; check box bounds are just rects
;
BSR.S RoundCalc ; calculate rounding factor
_HidePen ; dont draw anything
_OpenRgn
MOVE.L A3,A0 ; copy to A0 for HLock <C424/18Nov86> DAF
_HLock ; lock it down <C424/18Nov86> DAF
MOVE.L (A3),A0 ; get pointer to control
PEA ContrlRect(A0) ; push rectangle pointer
MOVE.L D4,-(SP) ; push rounding factor
_FrameRoundRect ; frame the button
MOVE.L D3,-(SP) ; push the region
_CloseRgn ; make the rounded rectangular region
_ShowPen
MOVE.L A3,A0 ; copy to A0 for HLock <C424/18Nov86> DAF
_HUnlock ; unlock the control <C424/18Nov86> DAF
;
; set the pattern for indicator dragging
;
DragGray
MOVE.L (A5),A0 ; get qDraw globals
LEA Gray(A0),A0 ; point to gray pattern
MOVE.L (A0)+,DragPattern ; move in the 1st half
MOVE.L (A0),DragPattern+4 ; move in the 2nd half
RTS ; all done!
;
CalcSquare
MOVE.L D3,-(SP) ; push the region
PEA ContrlRect(A0) ; push the rectangle pointer
_RectRgn ; make a rectangular region
BRA.S DragGray ; all done -- go set drag pattern
;
; PlotCheck takes care of drawing the actual check box of the check box button. It
; figures out where to draw the box, draws it, and then checks it or not based on
; the current value and hilite state of the button
;
PlotCheck
; first set the window content color <C59/30Jun86> DAF
TST.B IsColor(A6) ; are we on a color system?
BEQ.S @NoColor8 ; if on B&W, then skip
PEA ContentRGB(A6)
_RGBBackColor ;
@NoColor8 ; END OF A COLOR-ONLY SECTION
move.l (a3), a0 ; get control pointer <14>
lea contrlRect(a0), a4 ; point to the control rect <14>
SUBQ #8,SP ; allocate a rectangle on the stack
MOVE.W bottom(A4),D0 ; get rect height <EHB 20-May-85>
MOVE.W D0,D1 ; save a copy <EHB 20-May-85>
SUB.W top(A4),D0 ; get height <EHB 20-May-85>
SUB.W #12,D0 ; sub box height <EHB 20-May-85>
ASR.W #1,D0 ; div by 2 <EHB 20-May-85>
SUB.W D0,D1 ; get offset from bottom <EHB 20-May-85>
MOVE D1,Bottom(SP) ; set up the bottom <EHB 20-May-85>
SUB #12,D1 ; compute the top <EHB 20-May-85>
MOVE D1,Top(SP) ; set up the top <EHB 20-May-85>
tst.w teSysJust ; right to left? <MED 27-Aug-86>
beq.s LeftBoxTitle ; no, normal case <MED 27-Aug-86>
RightBoxTitle
MOVE Right(A4),D1 ; get left edge of boundsRect <MED 27-Aug-86>
subq #2,D1 ; indent 2 pixels <MED 27-Aug-86>
MOVE D1,Right(SP) ; thats the left of the checkRect <MED 27-Aug-86>
sub #12,D1 ; compute right edge <MED 27-Aug-86>
MOVE D1,Left(SP) ; update the right edge <MED 27-Aug-86>
bra.s EraseCheck ; continue <MED 27-Aug-86>
LeftBoxTitle
MOVE Left(A4),D1 ; get left edge of boundsRect <EHB 20-May-85>
ADDQ #2,D1 ; indent 2 pixels <EHB 20-May-85>
MOVE D1,Left(SP) ; thats the left of the checkRect <EHB 20-May-85>
ADD #12,D1 ; compute right edge <EHB 20-May-85>
MOVE D1,Right(SP) ; update the right edge <EHB 20-May-85>
EraseCheck
;
; erase the check box
;
MOVE.L SP,-(SP) ; push rectangle pointer
_EraseRect ; erase it
;
; OK, now we must fill in the checkBox rectangle based on the value and hilite state
; of the control
;
MOVE.L (A3),A0 ; get control pointer <14>
MOVE.W ContrlValue(A0),D5 ; get the value
MOVE.B ContrlHilite(A0),D0 ; is it hilited?
BEQ.S FrameCheck ; if not, skip
;
; its hilited so up the penSize to indicate its hilited
;
CMP.B #$FE,D0 ; disabled?
BLO.S SkipDis ; if so, skip doubling
;
TST.B useGrayText(A6) ; did we use GrayText?
BNE.S FrameCheck ; yes => skip DisableText since GrayText represents disabled state
BSR DisableText
BRA.S FrameCheck
SkipDis
MOVE.L #$00020002,-(SP)
_PenSize ; up the penSize
FrameCheck
MOVE.L SP,-(SP) ; push the rectangle
CMP.B #2,D6 ; test for radio button
BEQ.S @1 ; if its a radio button, go do it
_FrameRect ; frame it
BRA.S @2
@1
_FrameOval
@2
_PenNormal
;
; now we can draw the check if were supposed to
;
LSR #1,D5 ; check out the low bit of D5
BCC.S DonePCheck ; if its off, were done
;
CMP.W #2,D6 ; test for radio button
BEQ.S DrawRButton ; if its a radio button, go do it
;
MOVE.L SP,-(SP) ; push the rectangle pointer
MOVE.L OneOne,-(SP) ; push the inset factor
_InsetRect ; inset the rectangle
MOVE.L TopLeft(SP),-(SP) ; push top left
_MoveTo ; move to it
MOVE.L BotRight(SP),-(SP) ; push bottom right
_LineTo ; draw one line of the cross
;
MOVE Right(SP),-(SP) ; push right
MOVE Top+2(SP),-(SP) ; push top
SUBQ #1,(SP) ; bias the top
_MoveTo ; move to it
MOVE Left(SP),-(SP) ; push left
SUBQ #1,(SP) ; bias the left
MOVE Bottom+2(SP),-(SP) ; push bottom
_LineTo ; draw the line
BRA.S DonePCheck
;
; draw the radio button check mark -- a little circle
;
DrawRButton
MOVE.L SP,-(SP) ; push pointer to rect
MOVE.L #$00030003,-(SP) ; push inset factor
_InsetRect ; inset it
MOVE.L SP,-(SP) ; push rect again
_PaintOval ; draw the circle?
;
DonePCheck
ADDQ #8,SP ; pop off the rectangle
BRA DoneDrwBut ; all done!
END