/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* vim:set ts=2 sw=2 sts=2 et cindent: */ /* This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #if !defined(AudioStream_h_) #define AudioStream_h_ #include "AudioSampleFormat.h" #include "nsAutoPtr.h" #include "nsCOMPtr.h" #include "nsThreadUtils.h" #include "mozilla/dom/AudioChannelBinding.h" #include "mozilla/Monitor.h" #include "mozilla/RefPtr.h" #include "mozilla/TimeStamp.h" #include "mozilla/UniquePtr.h" #include "CubebUtils.h" #include "soundtouch/SoundTouchFactory.h" namespace mozilla { struct CubebDestroyPolicy { void operator()(cubeb_stream* aStream) const { cubeb_stream_destroy(aStream); } }; class AudioStream; class FrameHistory; class AudioClock { public: explicit AudioClock(AudioStream* aStream); // Initialize the clock with the current AudioStream. Need to be called // before querying the clock. Called on the audio thread. void Init(); // Update the number of samples that has been written in the audio backend. // Called on the state machine thread. void UpdateFrameHistory(uint32_t aServiced, uint32_t aUnderrun); // Get the read position of the stream, in microseconds. // Called on the state machine thead. // Assumes the AudioStream lock is held and thus calls Unlocked versions // of AudioStream funcs. int64_t GetPositionUnlocked() const; // Get the read position of the stream, in frames. // Called on the state machine thead. int64_t GetPositionInFrames() const; // Set the playback rate. // Called on the audio thread. // Assumes the AudioStream lock is held and thus calls Unlocked versions // of AudioStream funcs. void SetPlaybackRateUnlocked(double aPlaybackRate); // Get the current playback rate. // Called on the audio thread. double GetPlaybackRate() const; // Set if we are preserving the pitch. // Called on the audio thread. void SetPreservesPitch(bool aPreservesPitch); // Get the current pitch preservation state. // Called on the audio thread. bool GetPreservesPitch() const; private: // This AudioStream holds a strong reference to this AudioClock. This // pointer is garanteed to always be valid. AudioStream* const mAudioStream; // Output rate in Hz (characteristic of the playback rate) int mOutRate; // Input rate in Hz (characteristic of the media being played) int mInRate; // True if the we are timestretching, false if we are resampling. bool mPreservesPitch; // The history of frames sent to the audio engine in each DataCallback. const nsAutoPtr mFrameHistory; }; class CircularByteBuffer { public: CircularByteBuffer() : mBuffer(nullptr), mCapacity(0), mStart(0), mCount(0) {} // Set the capacity of the buffer in bytes. Must be called before any // call to append or pop elements. void SetCapacity(uint32_t aCapacity) { MOZ_ASSERT(!mBuffer, "Buffer allocated."); mCapacity = aCapacity; mBuffer = MakeUnique(mCapacity); } uint32_t Length() { return mCount; } uint32_t Capacity() { return mCapacity; } uint32_t Available() { return Capacity() - Length(); } // Append aLength bytes from aSrc to the buffer. Caller must check that // sufficient space is available. void AppendElements(const uint8_t* aSrc, uint32_t aLength) { MOZ_ASSERT(mBuffer && mCapacity, "Buffer not initialized."); MOZ_ASSERT(aLength <= Available(), "Buffer full."); uint32_t end = (mStart + mCount) % mCapacity; uint32_t toCopy = std::min(mCapacity - end, aLength); memcpy(&mBuffer[end], aSrc, toCopy); memcpy(&mBuffer[0], aSrc + toCopy, aLength - toCopy); mCount += aLength; } // Remove aSize bytes from the buffer. Caller must check returned size in // aSize{1,2} before using the pointer returned in aData{1,2}. Caller // must not specify an aSize larger than Length(). void PopElements(uint32_t aSize, void** aData1, uint32_t* aSize1, void** aData2, uint32_t* aSize2) { MOZ_ASSERT(mBuffer && mCapacity, "Buffer not initialized."); MOZ_ASSERT(aSize <= Length(), "Request too large."); *aData1 = &mBuffer[mStart]; *aSize1 = std::min(mCapacity - mStart, aSize); *aData2 = &mBuffer[0]; *aSize2 = aSize - *aSize1; mCount -= *aSize1 + *aSize2; mStart += *aSize1 + *aSize2; mStart %= mCapacity; } size_t SizeOfExcludingThis(MallocSizeOf aMallocSizeOf) const { size_t amount = 0; amount += aMallocSizeOf(mBuffer.get()); return amount; } private: UniquePtr mBuffer; uint32_t mCapacity; uint32_t mStart; uint32_t mCount; }; // Access to a single instance of this class must be synchronized by // callers, or made from a single thread. One exception is that access to // GetPosition, GetPositionInFrames, SetVolume, and Get{Rate,Channels}, // SetMicrophoneActive is thread-safe without external synchronization. class AudioStream final { virtual ~AudioStream(); public: NS_INLINE_DECL_THREADSAFE_REFCOUNTING(AudioStream) AudioStream(); // Initialize the audio stream. aNumChannels is the number of audio // channels (1 for mono, 2 for stereo, etc) and aRate is the sample rate // (22050Hz, 44100Hz, etc). nsresult Init(int32_t aNumChannels, int32_t aRate, const dom::AudioChannel aAudioStreamChannel); // Closes the stream. All future use of the stream is an error. void Shutdown(); void Reset(); // Write audio data to the audio hardware. aBuf is an array of AudioDataValues // AudioDataValue of length aFrames*mChannels. If aFrames is larger // than the result of Available(), the write will block until sufficient // buffer space is available. nsresult Write(const AudioDataValue* aBuf, uint32_t aFrames); // Return the number of audio frames that can be written without blocking. uint32_t Available(); // Set the current volume of the audio playback. This is a value from // 0 (meaning muted) to 1 (meaning full volume). Thread-safe. void SetVolume(double aVolume); // Block until buffered audio data has been consumed. void Drain(); // Break any blocking operation and set the stream to shutdown. void Cancel(); // Start the stream. void Start(); // Return the number of frames written so far in the stream. This allow the // caller to check if it is safe to start the stream, if needed. int64_t GetWritten(); // Pause audio playback. void Pause(); // Resume audio playback. void Resume(); // Return the position in microseconds of the audio frame being played by // the audio hardware, compensated for playback rate change. Thread-safe. int64_t GetPosition(); // Return the position, measured in audio frames played since the stream // was opened, of the audio hardware. Thread-safe. int64_t GetPositionInFrames(); // Returns true when the audio stream is paused. bool IsPaused(); int GetRate() { return mOutRate; } int GetChannels() { return mChannels; } int GetOutChannels() { return mOutChannels; } // Set playback rate as a multiple of the intrinsic playback rate. This is to // be called only with aPlaybackRate > 0.0. nsresult SetPlaybackRate(double aPlaybackRate); // Switch between resampling (if false) and time stretching (if true, default). nsresult SetPreservesPitch(bool aPreservesPitch); size_t SizeOfIncludingThis(MallocSizeOf aMallocSizeOf) const; protected: friend class AudioClock; // Return the position, measured in audio frames played since the stream was // opened, of the audio hardware, not adjusted for the changes of playback // rate or underrun frames. // Caller must own the monitor. int64_t GetPositionInFramesUnlocked(); private: nsresult OpenCubeb(cubeb_stream_params &aParams); static long DataCallback_S(cubeb_stream*, void* aThis, void* aBuffer, long aFrames) { return static_cast(aThis)->DataCallback(aBuffer, aFrames); } static void StateCallback_S(cubeb_stream*, void* aThis, cubeb_state aState) { static_cast(aThis)->StateCallback(aState); } long DataCallback(void* aBuffer, long aFrames); void StateCallback(cubeb_state aState); nsresult EnsureTimeStretcherInitializedUnlocked(); long GetUnprocessed(void* aBuffer, long aFrames); long GetTimeStretched(void* aBuffer, long aFrames); void StartUnlocked(); // The monitor is held to protect all access to member variables. Write() // waits while mBuffer is full; DataCallback() notifies as it consumes // data from mBuffer. Drain() waits while mState is DRAINING; // StateCallback() notifies when mState is DRAINED. Monitor mMonitor; // Input rate in Hz (characteristic of the media being played) int mInRate; // Output rate in Hz (characteristic of the playback rate) int mOutRate; int mChannels; int mOutChannels; #if defined(__ANDROID__) dom::AudioChannel mAudioChannel; #endif // Number of frames written to the buffers. int64_t mWritten; AudioClock mAudioClock; soundtouch::SoundTouch* mTimeStretcher; // Stream start time for stream open delay telemetry. TimeStamp mStartTime; // Output file for dumping audio FILE* mDumpFile; // Temporary audio buffer. Filled by Write() and consumed by // DataCallback(). Once mBuffer is full, Write() blocks until sufficient // space becomes available in mBuffer. mBuffer is sized in bytes, not // frames. CircularByteBuffer mBuffer; // Owning reference to a cubeb_stream. UniquePtr mCubebStream; uint32_t mBytesPerFrame; uint32_t BytesToFrames(uint32_t aBytes) { NS_ASSERTION(aBytes % mBytesPerFrame == 0, "Byte count not aligned on frames size."); return aBytes / mBytesPerFrame; } uint32_t FramesToBytes(uint32_t aFrames) { return aFrames * mBytesPerFrame; } enum StreamState { INITIALIZED, // Initialized, playback has not begun. STARTED, // cubeb started, but callbacks haven't started RUNNING, // DataCallbacks have started after STARTED, or after Resume(). STOPPED, // Stopped by a call to Pause(). DRAINING, // Drain requested. DataCallback will indicate end of stream // once the remaining contents of mBuffer are requested by // cubeb, after which StateCallback will indicate drain // completion. DRAINED, // StateCallback has indicated that the drain is complete. ERRORED, // Stream disabled due to an internal error. SHUTDOWN // Shutdown has been called }; StreamState mState; bool mIsFirst; // Get this value from the preferece, if true, we would downmix the stereo. bool mIsMonoAudioEnabled; }; } // namespace mozilla #endif