Retro68/binutils/bfd/coff-w65.c

376 lines
11 KiB
C
Raw Normal View History

2012-03-26 19:18:29 +00:00
/* BFD back-end for WDC 65816 COFF binaries.
2017-04-10 11:32:00 +00:00
Copyright (C) 1995-2017 Free Software Foundation, Inc.
2012-03-26 19:18:29 +00:00
Written by Steve Chamberlain, <sac@cygnus.com>.
This file is part of BFD, the Binary File Descriptor library.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
#include "sysdep.h"
#include "bfd.h"
#include "libbfd.h"
#include "bfdlink.h"
#include "coff/w65.h"
#include "coff/internal.h"
#include "libcoff.h"
#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
static reloc_howto_type howto_table[] =
{
HOWTO (R_W65_ABS8, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, 0, "abs8", TRUE, 0x000000ff, 0x000000ff, FALSE),
2017-04-10 11:32:00 +00:00
HOWTO (R_W65_ABS16, 1, 0, 16, FALSE, 0, complain_overflow_bitfield, 0, "abs16", TRUE, 0x0000ffff, 0x0000ffff, FALSE),
HOWTO (R_W65_ABS24, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, 0, "abs24", TRUE, 0x00ffffff, 0x00ffffff, FALSE),
HOWTO (R_W65_ABS8S8, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, 0, ">abs8", TRUE, 0x000000ff, 0x000000ff, FALSE),
HOWTO (R_W65_ABS8S16, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, 0, "^abs8", TRUE, 0x000000ff, 0x000000ff, FALSE),
HOWTO (R_W65_ABS16S8, 1, 0, 16, FALSE, 0, complain_overflow_bitfield, 0, ">abs16", TRUE, 0x0000ffff, 0x0000ffff, FALSE),
HOWTO (R_W65_ABS16S16,1, 0, 16, FALSE, 0, complain_overflow_bitfield, 0, "^abs16", TRUE, 0x0000ffff, 0x0000ffff, FALSE),
HOWTO (R_W65_PCR8, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, 0, "pcrel8", TRUE, 0x000000ff, 0x000000ff, TRUE),
HOWTO (R_W65_PCR16, 1, 0, 16, FALSE, 0, complain_overflow_bitfield, 0, "pcrel16", TRUE, 0x0000ffff, 0x0000ffff, TRUE),
HOWTO (R_W65_DP, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, 0, "dp", TRUE, 0x000000ff, 0x000000ff, FALSE),
};
2012-03-26 19:18:29 +00:00
2015-08-28 15:32:19 +00:00
#define NUM_HOWTOS (sizeof (howto_table) / sizeof (howto_table[0]))
2012-03-26 19:18:29 +00:00
/* Turn a howto into a reloc number. */
#define SELECT_RELOC(x,howto) \
{ x.r_type = select_reloc(howto); }
#define BADMAG(x) (W65BADMAG(x))
#define W65 1 /* Customize coffcode.h */
#define __A_MAGIC_SET__
/* Code to swap in the reloc */
#define SWAP_IN_RELOC_OFFSET H_GET_32
#define SWAP_OUT_RELOC_OFFSET H_PUT_32
#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
dst->r_stuff[0] = 'S'; \
dst->r_stuff[1] = 'C';
static int
select_reloc (reloc_howto_type *howto)
2012-03-26 19:18:29 +00:00
{
2015-08-28 15:32:19 +00:00
return howto->type;
2012-03-26 19:18:29 +00:00
}
/* Code to turn a r_type into a howto ptr, uses the above howto table. */
static void
rtype2howto (arelent *internal,
struct internal_reloc *dst)
2012-03-26 19:18:29 +00:00
{
2015-08-28 15:32:19 +00:00
if (dst->r_type > 0 && dst->r_type <= NUM_HOWTOS)
internal->howto = howto_table + dst->r_type - 1;
else
internal->howto = NULL;
2012-03-26 19:18:29 +00:00
}
#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
/* Perform any necessary magic to the addend in a reloc entry. */
#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
cache_ptr->addend = ext_reloc.r_offset;
#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
reloc_processing(relent, reloc, symbols, abfd, section)
static void
reloc_processing (arelent * relent,
struct internal_reloc *reloc,
asymbol ** symbols,
bfd * abfd,
asection * section)
2012-03-26 19:18:29 +00:00
{
relent->address = reloc->r_vaddr;
rtype2howto (relent, reloc);
if (((int) reloc->r_symndx) > 0)
relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
else
relent->sym_ptr_ptr = (asymbol **) bfd_abs_section_ptr->symbol_ptr_ptr;
relent->addend = reloc->r_offset;
relent->address -= section->vma;
/* relent->section = 0;*/
}
static int
w65_reloc16_estimate (bfd *abfd,
asection *input_section,
arelent *reloc,
unsigned int shrink,
struct bfd_link_info *link_info)
2012-03-26 19:18:29 +00:00
{
bfd_vma value;
bfd_vma dot;
bfd_vma gap;
/* The address of the thing to be relocated will have moved back by
the size of the shrink - but we don't change reloc->address here,
since we need it to know where the relocation lives in the source
uncooked section. */
2012-03-26 19:18:29 +00:00
/* reloc->address -= shrink; conceptual */
bfd_vma address = reloc->address - shrink;
switch (reloc->howto->type)
{
case R_MOV16B2:
case R_JMP2:
shrink+=2;
break;
/* Thing is a move one byte. */
case R_MOV16B1:
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
if (value >= 0xff00)
{
/* Change the reloc type from 16bit, possible 8 to 8bit
possible 16. */
reloc->howto = reloc->howto + 1;
/* The place to relc moves back by one. */
/* This will be two bytes smaller in the long run. */
shrink += 2;
bfd_perform_slip (abfd, 2, input_section, address);
}
break;
/* This is the 24 bit branch which could become an 8 bitter,
the relocation points to the first byte of the insn, not the
actual data. */
case R_JMPL1:
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
dot = input_section->output_section->vma +
input_section->output_offset + address;
/* See if the address we're looking at within 127 bytes of where
we are, if so then we can use a small branch rather than the
jump we were going to. */
gap = value - dot;
if (-120 < (long) gap && (long) gap < 120)
{
/* Change the reloc type from 24bit, possible 8 to 8bit
possible 32. */
reloc->howto = reloc->howto + 1;
/* This will be two bytes smaller in the long run. */
shrink += 2;
bfd_perform_slip (abfd, 2, input_section, address);
}
break;
case R_JMP1:
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
dot = input_section->output_section->vma +
input_section->output_offset + address;
/* See if the address we're looking at within 127 bytes of where
we are, if so then we can use a small branch rather than the
jump we were going to. */
gap = value - (dot - shrink);
if (-120 < (long) gap && (long) gap < 120)
{
/* Change the reloc type from 16bit, possible 8 to 8bit
possible 16. */
reloc->howto = reloc->howto + 1;
/* The place to relc moves back by one. */
/* This will be two bytes smaller in the long run. */
shrink += 2;
bfd_perform_slip (abfd, 2, input_section, address);
}
break;
}
return shrink;
}
/* First phase of a relaxing link. */
/* Reloc types
large small
R_MOV16B1 R_MOV16B2 mov.b with 16bit or 8 bit address
R_JMP1 R_JMP2 jmp or pcrel branch
R_JMPL1 R_JMPL_B8 24jmp or pcrel branch
R_MOV24B1 R_MOV24B2 24 or 8 bit reloc for mov.b */
static void
w65_reloc16_extra_cases (bfd *abfd,
struct bfd_link_info *link_info,
struct bfd_link_order *link_order,
arelent *reloc,
bfd_byte *data,
unsigned int *src_ptr,
unsigned int *dst_ptr)
2012-03-26 19:18:29 +00:00
{
unsigned int src_address = *src_ptr;
unsigned int dst_address = *dst_ptr;
asection *input_section = link_order->u.indirect.section;
switch (reloc->howto->type)
{
case R_W65_ABS8:
case R_W65_DP:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
bfd_put_8 (abfd, gap, data + dst_address);
dst_address += 1;
src_address += 1;
}
break;
case R_W65_ABS8S8:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
gap >>= 8;
bfd_put_8 (abfd, gap, data + dst_address);
dst_address += 1;
src_address += 1;
}
break;
case R_W65_ABS8S16:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
gap >>= 16;
bfd_put_8 (abfd, gap, data + dst_address);
dst_address += 1;
src_address += 1;
}
break;
case R_W65_ABS16:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
dst_address += 2;
src_address += 2;
}
break;
case R_W65_ABS16S8:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
gap >>= 8;
bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
dst_address += 2;
src_address += 2;
}
break;
case R_W65_ABS16S16:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
gap >>= 16;
bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
dst_address += 2;
src_address += 2;
}
break;
case R_W65_ABS24:
{
unsigned int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
bfd_put_8 (abfd, gap >> 16, data+dst_address + 2);
dst_address += 3;
src_address += 3;
}
break;
case R_W65_PCR8:
{
int gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
bfd_vma dot = (dst_address
+ input_section->output_offset
+ input_section->output_section->vma);
gap -= dot + 1;
if (gap < -128 || gap > 127)
2017-04-10 11:32:00 +00:00
(*link_info->callbacks->reloc_overflow)
(link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address);
2012-03-26 19:18:29 +00:00
bfd_put_8 (abfd, gap, data + dst_address);
dst_address += 1;
src_address += 1;
}
break;
case R_W65_PCR16:
{
bfd_vma gap = bfd_coff_reloc16_get_value (reloc, link_info,
input_section);
bfd_vma dot = (dst_address
+ input_section->output_offset
+ input_section->output_section->vma);
/* This wraps within the page, so ignore the relativeness, look at the
high part. */
if ((gap & 0xf0000) != (dot & 0xf0000))
2017-04-10 11:32:00 +00:00
(*link_info->callbacks->reloc_overflow)
(link_info, NULL, bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address);
2012-03-26 19:18:29 +00:00
gap -= dot + 2;
bfd_put_16 (abfd, gap, data + dst_address);
dst_address += 2;
src_address += 2;
}
break;
default:
printf (_("ignoring reloc %s\n"), reloc->howto->name);
break;
}
*src_ptr = src_address;
*dst_ptr = dst_address;
}
#define coff_reloc16_extra_cases w65_reloc16_extra_cases
#define coff_reloc16_estimate w65_reloc16_estimate
#ifndef bfd_pe_print_pdata
#define bfd_pe_print_pdata NULL
#endif
#include "coffcode.h"
#undef coff_bfd_get_relocated_section_contents
#undef coff_bfd_relax_section
#define coff_bfd_get_relocated_section_contents \
bfd_coff_reloc16_get_relocated_section_contents
#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
2015-08-28 15:32:19 +00:00
CREATE_LITTLE_COFF_TARGET_VEC (w65_coff_vec, "coff-w65", BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE)