Retro68/gcc/libbacktrace/Makefile.in
2017-10-07 02:16:47 +02:00

771 lines
24 KiB
Makefile

# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Makefile.am -- Backtrace Makefile.
# Copyright (C) 2012-2016 Free Software Foundation, Inc.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# (1) Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# (2) Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# (3) The name of the author may not be used to
# endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
esac; \
test $$am__dry = yes; \
}
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
check_PROGRAMS = $(am__EXEEXT_1)
@NATIVE_TRUE@am__append_1 = btest stest
subdir = .
DIST_COMMON = README ChangeLog $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(srcdir)/config.h.in \
$(srcdir)/../mkinstalldirs $(srcdir)/backtrace-supported.h.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/stdint.m4 \
$(top_srcdir)/../config/unwind_ipinfo.m4 \
$(top_srcdir)/../config/warnings.m4 \
$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = backtrace-supported.h
CONFIG_CLEAN_VPATH_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
am__DEPENDENCIES_1 =
am_libbacktrace_la_OBJECTS = atomic.lo dwarf.lo fileline.lo posix.lo \
print.lo sort.lo state.lo
libbacktrace_la_OBJECTS = $(am_libbacktrace_la_OBJECTS)
@NATIVE_TRUE@am__EXEEXT_1 = btest$(EXEEXT) stest$(EXEEXT)
@NATIVE_TRUE@am_btest_OBJECTS = btest-btest.$(OBJEXT)
btest_OBJECTS = $(am_btest_OBJECTS)
@NATIVE_TRUE@btest_DEPENDENCIES = libbacktrace.la
btest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(btest_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
@NATIVE_TRUE@am_stest_OBJECTS = stest.$(OBJEXT)
stest_OBJECTS = $(am_stest_OBJECTS)
@NATIVE_TRUE@stest_DEPENDENCIES = libbacktrace.la
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(libbacktrace_la_SOURCES) $(EXTRA_libbacktrace_la_SOURCES) \
$(btest_SOURCES) $(stest_SOURCES)
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
ETAGS = etags
CTAGS = ctags
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
ACLOCAL = @ACLOCAL@
ALLOC_FILE = @ALLOC_FILE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BACKTRACE_FILE = @BACKTRACE_FILE@
BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@
BACKTRACE_SUPPORTS_DATA = @BACKTRACE_SUPPORTS_DATA@
BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@
BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@
CC = @CC@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_FLAGS = @EXTRA_FLAGS@
FGREP = @FGREP@
FORMAT_FILE = @FORMAT_FILE@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PIC_FLAG = @PIC_FLAG@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
VIEW_FILE = @VIEW_FILE@
WARN_FLAGS = @WARN_FLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I .. -I ../config
AM_CPPFLAGS = -I $(top_srcdir)/../include -I $(top_srcdir)/../libgcc \
-I ../libgcc
AM_CFLAGS = $(EXTRA_FLAGS) $(WARN_FLAGS) $(PIC_FLAG)
noinst_LTLIBRARIES = libbacktrace.la
libbacktrace_la_SOURCES = \
backtrace.h \
atomic.c \
dwarf.c \
fileline.c \
internal.h \
posix.c \
print.c \
sort.c \
state.c
BACKTRACE_FILES = \
backtrace.c \
simple.c \
nounwind.c
FORMAT_FILES = \
elf.c \
pecoff.c \
unknown.c
VIEW_FILES = \
read.c \
mmapio.c
ALLOC_FILES = \
alloc.c \
mmap.c
EXTRA_libbacktrace_la_SOURCES = \
$(BACKTRACE_FILES) \
$(FORMAT_FILES) \
$(VIEW_FILES) \
$(ALLOC_FILES)
libbacktrace_la_LIBADD = \
$(BACKTRACE_FILE) \
$(FORMAT_FILE) \
$(VIEW_FILE) \
$(ALLOC_FILE)
libbacktrace_la_DEPENDENCIES = $(libbacktrace_la_LIBADD)
TESTS = $(check_PROGRAMS)
@NATIVE_TRUE@btest_SOURCES = btest.c
@NATIVE_TRUE@btest_CFLAGS = $(AM_CFLAGS) -g -O
@NATIVE_TRUE@btest_LDADD = libbacktrace.la
@NATIVE_TRUE@stest_SOURCES = stest.c
@NATIVE_TRUE@stest_LDADD = libbacktrace.la
# We can't use automake's automatic dependency tracking, because it
# breaks when using bootstrap-lean. Automatic dependency tracking
# with GCC bootstrap will cause some of the objects to depend on
# header files in prev-gcc/include, e.g., stddef.h and stdarg.h. When
# using bootstrap-lean, prev-gcc is removed after each stage. When
# running "make install", those header files will be gone, causing the
# library to be rebuilt at install time. That may not succeed.
# These manual dependencies do not include dependencies on unwind.h,
# even though that is part of GCC, because where to find it depends on
# whether we are being built as a host library or a target library.
INCDIR = $(top_srcdir)/../include
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign --ignore-deps Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then rm -f stamp-h1; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
backtrace-supported.h: $(top_builddir)/config.status $(srcdir)/backtrace-supported.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
clean-noinstLTLIBRARIES:
-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libbacktrace.la: $(libbacktrace_la_OBJECTS) $(libbacktrace_la_DEPENDENCIES) $(EXTRA_libbacktrace_la_DEPENDENCIES)
$(LINK) $(libbacktrace_la_OBJECTS) $(libbacktrace_la_LIBADD) $(LIBS)
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
btest$(EXEEXT): $(btest_OBJECTS) $(btest_DEPENDENCIES) $(EXTRA_btest_DEPENDENCIES)
@rm -f btest$(EXEEXT)
$(btest_LINK) $(btest_OBJECTS) $(btest_LDADD) $(LIBS)
stest$(EXEEXT): $(stest_OBJECTS) $(stest_DEPENDENCIES) $(EXTRA_stest_DEPENDENCIES)
@rm -f stest$(EXEEXT)
$(LINK) $(stest_OBJECTS) $(stest_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(COMPILE) -c $<
.c.obj:
$(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(LTCOMPILE) -c -o $@ $<
btest-btest.o: btest.c
$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.o `test -f 'btest.c' || echo '$(srcdir)/'`btest.c
btest-btest.obj: btest.c
$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.obj `if test -f 'btest.c'; then $(CYGPATH_W) 'btest.c'; else $(CYGPATH_W) '$(srcdir)/btest.c'; fi`
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# GNU Make needs to see an explicit $(MAKE) variable in the command it
# runs to enable its job server during parallel builds. Hence the
# comments below.
all-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
install-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
mostlyclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-TESTS: $(TESTS)
@failed=0; all=0; xfail=0; xpass=0; skip=0; \
srcdir=$(srcdir); export srcdir; \
list=' $(TESTS) '; \
$(am__tty_colors); \
if test -n "$$list"; then \
for tst in $$list; do \
if test -f ./$$tst; then dir=./; \
elif test -f $$tst; then dir=; \
else dir="$(srcdir)/"; fi; \
if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$tst[\ \ ]*) \
xpass=`expr $$xpass + 1`; \
failed=`expr $$failed + 1`; \
col=$$red; res=XPASS; \
;; \
*) \
col=$$grn; res=PASS; \
;; \
esac; \
elif test $$? -ne 77; then \
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$tst[\ \ ]*) \
xfail=`expr $$xfail + 1`; \
col=$$lgn; res=XFAIL; \
;; \
*) \
failed=`expr $$failed + 1`; \
col=$$red; res=FAIL; \
;; \
esac; \
else \
skip=`expr $$skip + 1`; \
col=$$blu; res=SKIP; \
fi; \
echo "$${col}$$res$${std}: $$tst"; \
done; \
if test "$$all" -eq 1; then \
tests="test"; \
All=""; \
else \
tests="tests"; \
All="All "; \
fi; \
if test "$$failed" -eq 0; then \
if test "$$xfail" -eq 0; then \
banner="$$All$$all $$tests passed"; \
else \
if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
fi; \
else \
if test "$$xpass" -eq 0; then \
banner="$$failed of $$all $$tests failed"; \
else \
if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
fi; \
fi; \
dashes="$$banner"; \
skipped=""; \
if test "$$skip" -ne 0; then \
if test "$$skip" -eq 1; then \
skipped="($$skip test was not run)"; \
else \
skipped="($$skip tests were not run)"; \
fi; \
test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
dashes="$$skipped"; \
fi; \
report=""; \
if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
report="Please report to $(PACKAGE_BUGREPORT)"; \
test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
dashes="$$report"; \
fi; \
dashes=`echo "$$dashes" | sed s/./=/g`; \
if test "$$failed" -eq 0; then \
col="$$grn"; \
else \
col="$$red"; \
fi; \
echo "$${col}$$dashes$${std}"; \
echo "$${col}$$banner$${std}"; \
test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
test -z "$$report" || echo "$${col}$$report$${std}"; \
echo "$${col}$$dashes$${std}"; \
test "$$failed" -eq 0; \
else :; fi
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(LTLIBRARIES) all-multi config.h
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am clean-multi
clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
clean-noinstLTLIBRARIES mostlyclean-am
distclean: distclean-am distclean-multi
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-multi
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am maintainer-clean-multi
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am mostlyclean-multi
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am:
.MAKE: all all-multi check-am clean-multi distclean-multi install-am \
install-multi install-strip maintainer-clean-multi \
mostlyclean-multi
.PHONY: CTAGS GTAGS all all-am all-multi am--refresh check check-TESTS \
check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
clean-multi clean-noinstLTLIBRARIES ctags distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-libtool distclean-multi distclean-tags dvi dvi-am \
html html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-multi install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic maintainer-clean-multi mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
mostlyclean-multi pdf pdf-am ps ps-am tags uninstall \
uninstall-am
alloc.lo: config.h backtrace.h internal.h
backtrace.lo: config.h backtrace.h internal.h
btest.lo: (INCDIR)/filenames.h backtrace.h backtrace-supported.h
dwarf.lo: config.h $(INCDIR)/dwarf2.h $(INCDIR)/dwarf2.def \
$(INCDIR)/filenames.h backtrace.h internal.h
elf.lo: config.h backtrace.h internal.h
fileline.lo: config.h backtrace.h internal.h
mmap.lo: config.h backtrace.h internal.h
mmapio.lo: config.h backtrace.h internal.h
nounwind.lo: config.h internal.h
pecoff.lo: config.h backtrace.h internal.h
posix.lo: config.h backtrace.h internal.h
print.lo: config.h backtrace.h internal.h
read.lo: config.h backtrace.h internal.h
simple.lo: config.h backtrace.h internal.h
sort.lo: config.h backtrace.h internal.h
stest.lo: config.h backtrace.h internal.h
state.lo: config.h backtrace.h backtrace-supported.h internal.h
unknown.lo: config.h backtrace.h internal.h
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: