Retro68/binutils/bfd/doc/mmo.texi
2015-08-28 17:32:19 +02:00

370 lines
14 KiB
Plaintext

@section mmo backend
The mmo object format is used exclusively together with Professor
Donald E.@: Knuth's educational 64-bit processor MMIX. The simulator
@command{mmix} which is available at
@url{http://mmix.cs.hm.edu/src/index.html}
understands this format. That package also includes a combined
assembler and linker called @command{mmixal}. The mmo format has
no advantages feature-wise compared to e.g. ELF. It is a simple
non-relocatable object format with no support for archives or
debugging information, except for symbol value information and
line numbers (which is not yet implemented in BFD). See
@url{http://mmix.cs.hm.edu/} for more
information about MMIX. The ELF format is used for intermediate
object files in the BFD implementation.
@c We want to xref the symbol table node. A feature in "chew"
@c requires that "commands" do not contain spaces in the
@c arguments. Hence the hyphen in "Symbol-table".
@menu
* File layout::
* Symbol-table::
* mmo section mapping::
@end menu
@node File layout, Symbol-table, mmo, mmo
@subsection File layout
The mmo file contents is not partitioned into named sections as
with e.g.@: ELF. Memory areas is formed by specifying the
location of the data that follows. Only the memory area
@samp{0x0000@dots{}00} to @samp{0x01ff@dots{}ff} is executable, so
it is used for code (and constants) and the area
@samp{0x2000@dots{}00} to @samp{0x20ff@dots{}ff} is used for
writable data. @xref{mmo section mapping}.
There is provision for specifying ``special data'' of 65536
different types. We use type 80 (decimal), arbitrarily chosen the
same as the ELF @code{e_machine} number for MMIX, filling it with
section information normally found in ELF objects. @xref{mmo
section mapping}.
Contents is entered as 32-bit words, xor:ed over previous
contents, always zero-initialized. A word that starts with the
byte @samp{0x98} forms a command called a @samp{lopcode}, where
the next byte distinguished between the thirteen lopcodes. The
two remaining bytes, called the @samp{Y} and @samp{Z} fields, or
the @samp{YZ} field (a 16-bit big-endian number), are used for
various purposes different for each lopcode. As documented in
@url{http://mmix.cs.hm.edu/doc/mmixal.pdf},
the lopcodes are:
@table @code
@item lop_quote
0x98000001. The next word is contents, regardless of whether it
starts with 0x98 or not.
@item lop_loc
0x9801YYZZ, where @samp{Z} is 1 or 2. This is a location
directive, setting the location for the next data to the next
32-bit word (for @math{Z = 1}) or 64-bit word (for @math{Z = 2}),
plus @math{Y * 2^56}. Normally @samp{Y} is 0 for the text segment
and 2 for the data segment. Beware that the low bits of non-
tetrabyte-aligned values are silently discarded when being
automatically incremented and when storing contents (in contrast
to e.g. its use as current location when followed by lop_fixo
et al before the next possibly-quoted tetrabyte contents).
@item lop_skip
0x9802YYZZ. Increase the current location by @samp{YZ} bytes.
@item lop_fixo
0x9803YYZZ, where @samp{Z} is 1 or 2. Store the current location
as 64 bits into the location pointed to by the next 32-bit
(@math{Z = 1}) or 64-bit (@math{Z = 2}) word, plus @math{Y *
2^56}.
@item lop_fixr
0x9804YYZZ. @samp{YZ} is stored into the current location plus
@math{2 - 4 * YZ}.
@item lop_fixrx
0x980500ZZ. @samp{Z} is 16 or 24. A value @samp{L} derived from
the following 32-bit word are used in a manner similar to
@samp{YZ} in lop_fixr: it is xor:ed into the current location
minus @math{4 * L}. The first byte of the word is 0 or 1. If it
is 1, then @math{L = (@var{lowest 24 bits of word}) - 2^Z}, if 0,
then @math{L = (@var{lowest 24 bits of word})}.
@item lop_file
0x9806YYZZ. @samp{Y} is the file number, @samp{Z} is count of
32-bit words. Set the file number to @samp{Y} and the line
counter to 0. The next @math{Z * 4} bytes contain the file name,
padded with zeros if the count is not a multiple of four. The
same @samp{Y} may occur multiple times, but @samp{Z} must be 0 for
all but the first occurrence.
@item lop_line
0x9807YYZZ. @samp{YZ} is the line number. Together with
lop_file, it forms the source location for the next 32-bit word.
Note that for each non-lopcode 32-bit word, line numbers are
assumed incremented by one.
@item lop_spec
0x9808YYZZ. @samp{YZ} is the type number. Data until the next
lopcode other than lop_quote forms special data of type @samp{YZ}.
@xref{mmo section mapping}.
Other types than 80, (or type 80 with a content that does not
parse) is stored in sections named @code{.MMIX.spec_data.@var{n}}
where @var{n} is the @samp{YZ}-type. The flags for such a
sections say not to allocate or load the data. The vma is 0.
Contents of multiple occurrences of special data @var{n} is
concatenated to the data of the previous lop_spec @var{n}s. The
location in data or code at which the lop_spec occurred is lost.
@item lop_pre
0x980901ZZ. The first lopcode in a file. The @samp{Z} field forms the
length of header information in 32-bit words, where the first word
tells the time in seconds since @samp{00:00:00 GMT Jan 1 1970}.
@item lop_post
0x980a00ZZ. @math{Z > 32}. This lopcode follows after all
content-generating lopcodes in a program. The @samp{Z} field
denotes the value of @samp{rG} at the beginning of the program.
The following @math{256 - Z} big-endian 64-bit words are loaded
into global registers @samp{$G} @dots{} @samp{$255}.
@item lop_stab
0x980b0000. The next-to-last lopcode in a program. Must follow
immediately after the lop_post lopcode and its data. After this
lopcode follows all symbols in a compressed format
(@pxref{Symbol-table}).
@item lop_end
0x980cYYZZ. The last lopcode in a program. It must follow the
lop_stab lopcode and its data. The @samp{YZ} field contains the
number of 32-bit words of symbol table information after the
preceding lop_stab lopcode.
@end table
Note that the lopcode "fixups"; @code{lop_fixr}, @code{lop_fixrx} and
@code{lop_fixo} are not generated by BFD, but are handled. They are
generated by @code{mmixal}.
This trivial one-label, one-instruction file:
@example
:Main TRAP 1,2,3
@end example
can be represented this way in mmo:
@example
0x98090101 - lop_pre, one 32-bit word with timestamp.
<timestamp>
0x98010002 - lop_loc, text segment, using a 64-bit address.
Note that mmixal does not emit this for the file above.
0x00000000 - Address, high 32 bits.
0x00000000 - Address, low 32 bits.
0x98060002 - lop_file, 2 32-bit words for file-name.
0x74657374 - "test"
0x2e730000 - ".s\0\0"
0x98070001 - lop_line, line 1.
0x00010203 - TRAP 1,2,3
0x980a00ff - lop_post, setting $255 to 0.
0x00000000
0x00000000
0x980b0000 - lop_stab for ":Main" = 0, serial 1.
0x203a4040 @xref{Symbol-table}.
0x10404020
0x4d206120
0x69016e00
0x81000000
0x980c0005 - lop_end; symbol table contained five 32-bit words.
@end example
@node Symbol-table, mmo section mapping, File layout, mmo
@subsection Symbol table format
From mmixal.w (or really, the generated mmixal.tex) in the
MMIXware package which also contains the @command{mmix} simulator:
``Symbols are stored and retrieved by means of a @samp{ternary
search trie}, following ideas of Bentley and Sedgewick. (See
ACM--SIAM Symp.@: on Discrete Algorithms @samp{8} (1997), 360--369;
R.@:Sedgewick, @samp{Algorithms in C} (Reading, Mass.@:
Addison--Wesley, 1998), @samp{15.4}.) Each trie node stores a
character, and there are branches to subtries for the cases where
a given character is less than, equal to, or greater than the
character in the trie. There also is a pointer to a symbol table
entry if a symbol ends at the current node.''
So it's a tree encoded as a stream of bytes. The stream of bytes
acts on a single virtual global symbol, adding and removing
characters and signalling complete symbol points. Here, we read
the stream and create symbols at the completion points.
First, there's a control byte @code{m}. If any of the listed bits
in @code{m} is nonzero, we execute what stands at the right, in
the listed order:
@example
(MMO3_LEFT)
0x40 - Traverse left trie.
(Read a new command byte and recurse.)
(MMO3_SYMBITS)
0x2f - Read the next byte as a character and store it in the
current character position; increment character position.
Test the bits of @code{m}:
(MMO3_WCHAR)
0x80 - The character is 16-bit (so read another byte,
merge into current character.
(MMO3_TYPEBITS)
0xf - We have a complete symbol; parse the type, value
and serial number and do what should be done
with a symbol. The type and length information
is in j = (m & 0xf).
(MMO3_REGQUAL_BITS)
j == 0xf: A register variable. The following
byte tells which register.
j <= 8: An absolute symbol. Read j bytes as the
big-endian number the symbol equals.
A j = 2 with two zero bytes denotes an
unknown symbol.
j > 8: As with j <= 8, but add (0x20 << 56)
to the value in the following j - 8
bytes.
Then comes the serial number, as a variant of
uleb128, but better named ubeb128:
Read bytes and shift the previous value left 7
(multiply by 128). Add in the new byte, repeat
until a byte has bit 7 set. The serial number
is the computed value minus 128.
(MMO3_MIDDLE)
0x20 - Traverse middle trie. (Read a new command byte
and recurse.) Decrement character position.
(MMO3_RIGHT)
0x10 - Traverse right trie. (Read a new command byte and
recurse.)
@end example
Let's look again at the @code{lop_stab} for the trivial file
(@pxref{File layout}).
@example
0x980b0000 - lop_stab for ":Main" = 0, serial 1.
0x203a4040
0x10404020
0x4d206120
0x69016e00
0x81000000
@end example
This forms the trivial trie (note that the path between ``:'' and
``M'' is redundant):
@example
203a ":"
40 /
40 /
10 \
40 /
40 /
204d "M"
2061 "a"
2069 "i"
016e "n" is the last character in a full symbol, and
with a value represented in one byte.
00 The value is 0.
81 The serial number is 1.
@end example
@node mmo section mapping, , Symbol-table, mmo
@subsection mmo section mapping
The implementation in BFD uses special data type 80 (decimal) to
encapsulate and describe named sections, containing e.g.@: debug
information. If needed, any datum in the encapsulation will be
quoted using lop_quote. First comes a 32-bit word holding the
number of 32-bit words containing the zero-terminated zero-padded
segment name. After the name there's a 32-bit word holding flags
describing the section type. Then comes a 64-bit big-endian word
with the section length (in bytes), then another with the section
start address. Depending on the type of section, the contents
might follow, zero-padded to 32-bit boundary. For a loadable
section (such as data or code), the contents might follow at some
later point, not necessarily immediately, as a lop_loc with the
same start address as in the section description, followed by the
contents. This in effect forms a descriptor that must be emitted
before the actual contents. Sections described this way must not
overlap.
For areas that don't have such descriptors, synthetic sections are
formed by BFD. Consecutive contents in the two memory areas
@samp{0x0000@dots{}00} to @samp{0x01ff@dots{}ff} and
@samp{0x2000@dots{}00} to @samp{0x20ff@dots{}ff} are entered in
sections named @code{.text} and @code{.data} respectively. If an area
is not otherwise described, but would together with a neighboring
lower area be less than @samp{0x40000000} bytes long, it is joined
with the lower area and the gap is zero-filled. For other cases,
a new section is formed, named @code{.MMIX.sec.@var{n}}. Here,
@var{n} is a number, a running count through the mmo file,
starting at 0.
A loadable section specified as:
@example
.section secname,"ax"
TETRA 1,2,3,4,-1,-2009
BYTE 80
@end example
and linked to address @samp{0x4}, is represented by the sequence:
@example
0x98080050 - lop_spec 80
0x00000002 - two 32-bit words for the section name
0x7365636e - "secn"
0x616d6500 - "ame\0"
0x00000033 - flags CODE, READONLY, LOAD, ALLOC
0x00000000 - high 32 bits of section length
0x0000001c - section length is 28 bytes; 6 * 4 + 1 + alignment to 32 bits
0x00000000 - high 32 bits of section address
0x00000004 - section address is 4
0x98010002 - 64 bits with address of following data
0x00000000 - high 32 bits of address
0x00000004 - low 32 bits: data starts at address 4
0x00000001 - 1
0x00000002 - 2
0x00000003 - 3
0x00000004 - 4
0xffffffff - -1
0xfffff827 - -2009
0x50000000 - 80 as a byte, padded with zeros.
@end example
Note that the lop_spec wrapping does not include the section
contents. Compare this to a non-loaded section specified as:
@example
.section thirdsec
TETRA 200001,100002
BYTE 38,40
@end example
This, when linked to address @samp{0x200000000000001c}, is
represented by:
@example
0x98080050 - lop_spec 80
0x00000002 - two 32-bit words for the section name
0x7365636e - "thir"
0x616d6500 - "dsec"
0x00000010 - flag READONLY
0x00000000 - high 32 bits of section length
0x0000000c - section length is 12 bytes; 2 * 4 + 2 + alignment to 32 bits
0x20000000 - high 32 bits of address
0x0000001c - low 32 bits of address 0x200000000000001c
0x00030d41 - 200001
0x000186a2 - 100002
0x26280000 - 38, 40 as bytes, padded with zeros
@end example
For the latter example, the section contents must not be
loaded in memory, and is therefore specified as part of the
special data. The address is usually unimportant but might
provide information for e.g.@: the DWARF 2 debugging format.