dingusppc/devices/video/control.h

162 lines
6.3 KiB
C
Raw Normal View History

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-24 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
/** @file TNT on-board video output definitions. */
#ifndef CONTROL_VIDEO_H
#define CONTROL_VIDEO_H
#include <devices/common/i2c/athens.h>
#include <devices/common/pci/pcidevice.h>
#include <devices/video/appleramdac.h>
#include <devices/video/displayid.h>
#include <devices/video/videoctrl.h>
#include <cinttypes>
#include <memory>
// Memory-mapped registers.
namespace ControlRegs {
enum ControlRegs : int {
// 512 bytes, repeats 8 times for 4K total.
// A register every 16 bytes, little endian, 32 bits, repeats 4 times.
CUR_LINE = 0x00, // current active video line (ro) 12 bits
VFPEQ = 0x01, // vertical front porch with EQ (rw) 12 bits
VFP = 0x02, // vertical front porch (rw) 12 bits
VAL = 0x03, // vertical active line (rw) 12 bits
VBP = 0x04, // vertical back porch (rw) 12 bits
VBPEQ = 0x05, // vertical back porch with EQ (rw) 12 bits
VSYNC = 0x06, // vertical sync starting point (rw) 12 bits
VHLINE = 0x07, // vertical half line (rw) 12 bits
PIPE_DELAY = 0x08, // controls pixel pipe delay (rw) 12 bits
HPIX = 0x09, // horizontal pixel count (rw) 12 bits
HFP = 0x0A, // horizontal front porch (rw) 12 bits
HAL = 0x0B, // horizontal active line (rw) 12 bits
HBWAY = 0x0C, // horizontal breezeway (rw) 12 bits
HSP = 0x0D, // horizontal sync starting point (rw) 12 bits
HEQ = 0x0E, // horizontal equalization (rw) 12 bits
HLFLN = 0x0F, // horizontal half line (rw) 12 bits
HSERR = 0x10, // horizontal serration (rw) 12 bits
CNTTST = 0x11, // Swatch counter test value (rw) 12 bits
SWATCH_CTRL = 0x12, // Swatch timing generator control (rw) 11 bits
GBASE = 0x13, // graphics base address (rw) 22 bits, 32 byte aligned
ROW_WORDS = 0x14, // framebuffer pitch (rw) 15 bits, 32 byte aligned
MON_SENSE = 0x15, // Monitor sense control & status (rw) 9 bits
MISC_ENABLES = 0x16, // controls chip's features (rw) 12 bits
GSC_DIVIDE = 0x17, // graphics clock divide count (rw) 2 bits
REFRESH_COUNT = 0x18, // VRAM refresh counter (rw) 10 bits
INT_ENABLE = 0x19, // interrupt enable bits (rw) 4 bits
INT_STATUS = 0x1A, // interrupt status bits (ro) 3 bits
};
}; // namespace ControlRegs
// Bit definitions for the video timing generator (Swatch) control register.
enum {
RESET_TIMING = 1 << 3, // toggle this bit to change timing parameters
DISABLE_TIMING = 1 << 10, // 1 - disable video timing, 0 - enable it
};
// Bit definitions for MISC_ENABLES register.
enum {
2024-02-09 08:42:55 +00:00
SCAN_CONTROL = 1 << 0, // 0 - interlaced, 1 - progressive
FB_ENDIAN_LITTLE = 1 << 1, // framebuffer endianness: 0 - big, 1 - little
VRAM_WIDE_MODE = 1 << 6, // VRAM bus width: 1 - 128bit, 0 - 64bit
BLANK_DISABLE = 1 << 11, // 0 - enable blanking, 1 - disable it
};
// Bit definitions for INT_ENABLE & INT_STATUS registers.
enum {
VBL_IRQ_CLR = 1 << 3, // VBL interrupt clear bit (INT_ENABLE)
VBL_IRQ_EN = 1 << 2, // VBL interrupt enable bit (INT_ENABLE)
VBL_IRQ_STAT = 1 << 2, // VBL interrupt status bit (INT_STATUS)
};
namespace RadacalRegs {
enum RadacalRegs : uint8_t {
ADDRESS = 0, // address register
CURSOR_CLUT = 1, // cursor palette data
MULTI = 2, // multipurpose section
CLUT_DATA = 3, // color palette data
// multipurpose section registers
CURSOR_POS_HI = 0x10, // cursor position, high-order byte
CURSOR_POS_LO = 0x11, // cursor position, low-order byte
MISC_CTRL = 0x20, // miscellaneus control bits
DBL_BUF_CTRL = 0x21, // double buffer control bits
TEST_CTRL = 0x22, // enable/disable DAC tests
};
}; // namespace RadacalRegs
class ControlVideo : public PCIDevice, public VideoCtrlBase {
public:
ControlVideo();
~ControlVideo() = default;
static std::unique_ptr<HWComponent> create() {
return std::unique_ptr<ControlVideo>(new ControlVideo());
}
// MMIODevice methods
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
protected:
void notify_bar_change(int bar_num);
void enable_display();
void disable_display();
// HWComponent methods
int device_postinit();
private:
std::unique_ptr<DisplayID> display_id;
std::unique_ptr<AthensClocks> clk_gen;
std::unique_ptr<AppleRamdac> radacal = nullptr;
std::unique_ptr<uint8_t[]> vram_ptr;
uint32_t vram_size;
uint32_t io_base = 0;
uint32_t vram_base = 0;
uint32_t regs_base = 0;
uint32_t swatch_ctrl = 0;
bool display_enabled = false;
uint32_t clock_divider = 0;
uint32_t row_words = 0;
uint32_t fb_base = 0;
uint16_t swatch_params[16];
int strobe_counter = 0;
uint8_t num_banks = 0;
uint8_t cur_mon_id = 0;
uint8_t enables = 0;
uint8_t int_enable = 0;
uint8_t int_status = 0;
uint8_t last_int_status = -1;
int last_int_status_read_count = 0;
};
#endif // CONTROL_VIDEO_H