Keeps track of instructions (including operands) that are executed,
to see if there are any hotspots that could be optimized or fastpaths
that should be added.
Also adds a mode where CPU profiler data is periodically output, to
make it easier to get at these instruction counts during startup.
The RR0_RX_CHARACTER_AVAILABLE bit is cleared after the character is read in receive_byte, but clear it anyway in read_reg when there's no character available just in case a character that was available somehow becomes unavailable.
Normally, the Port_B_Data or Port_A_Data address is used to directly access RR8 or WR8, but setting the register pointer in Port_B_Cmd or Port_A_Cmd to RR8/WR8 is another option.
Update write_regs[WR8] and read_regs[RR8] for possible debugging purposes.
Update write_regs[WR9] even though most or all of the bits are in master_int_cntrl.
Fix hardware reset for WR9. It's supposed to leave WR9_NO_VECTOR | WR9_VECTOR_INCLUDES_STATUS unchanged.
Fix channel reset for WR9. It's supposed to clear WR9_INTERRUPT_MASKING_WITHOUT_INTACK.
Add absolute coordinates for tablets. Absolute coordinates is relative to window so it can't work for multiple displays? Doesn't work for single display without mouse driver modification.
Add arbitrary number of buttons. Previously, only one mouse button was supported.
Add arbitrary number of bits. Previously, only 7 bits per axis was supported which is good enough for relative movement but not absolute movement.
Allow the dbdma program to initiate reading/writing by adding in and out callbacks.
Support the DBDMA flush command by adding a flush callback. If the transfer completes, then clear the flush flag, otherwise leave it unchanged.
Clear the flush flag after it is copied to the xferStatus of the DBDMA command.
cur_dma_rgn->end is the last byte of a region. It is not the byte after the region. Therefore, subtract 1 from size before doing compare.
Also add more detail to the abort messages.
