Result of running IWYU (https://include-what-you-use.org/) and
applying most of the suggestions about unncessary includes and
forward declarations.
Was motivated by observing that <thread> was being included in
ppcopcodes.cpp even though it was unused (found while researching
the use of threads), but seems generally good to help with build
times and correctness.
The simplest solution is to cut the aperture size by the amount
of video RAM installed. This way, accesses to the big-endian
aperture located above the installed VRAM will be catched and
reported by the MMU.
- Don't log anything if the I/O access is not for this device. A different device might handle it.
- Don't return true for I/O access if an I/O access is not performed. Otherwise the I/O access won't be passed to other devices.
While dingusppc only emulates 32-bit Macs (for now), it is possible for a 32-bit Power Mac to use a PCIe card that has 64-bit BARs.
finish_config_bars is added to scan the cfg values of the BARs and determine their type. The type is stored separately so that it does not need to be determined again.
The type can be I/O (16 or 32 bit) or Mem (20 or 32 or 64 bit). A 64 bit bar is two BARs, the second contains the most significant 32 bits.
set_bar_value uses the stored type instead of trying to determine the type itself. It is always called even when the firmware is doing sizing. For sizing, It does the job of setting the bar value so do_bar_sizing is now just a stub.
Every PCIDevice that has a BAR needs to call finish_config_bars after setting up the cfg values just as they need to setup the cfg values. Since they need to do both, maybe the cfg values should be arguments of finish_config_bars, then finish_config_bars() should be renamed config_bars().
dingusppc could not read bytes from offset 1,2,3 or words from offset 2.
dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3.
This commit fixes those issues.
- Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412)
A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written.
- Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified.
Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev.
read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106.
write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106.
pcidevice:
- The logging macros should be used to handle all config register access logging.
- Unaligned PCI config register accesses will be output as ERROR instead of WARNING.
- The logging macros include the offset and size. They also include the value for named registers or for writes.
- Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO.
pcihost:
- Added pci_find_device stub for handling PCI bridges in future commit.
bandit and mpc106:
- PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes.
bandit:
- Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class.
- Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract.
- Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device.
- For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does).
mpc106:
- Common config space code is put in cfg_setup. It handles extracting the offset.
- Added code to log access to unimplemented config registers of grackle.
- Don't call setup_ram when writing to config registers that setup_ram doesn't use.
- pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian.
atirage:
- The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
dingusppc could not read bytes from offset 1,2,3 or words from offset 2.
dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3.
This commit fixes those issues.
- Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the pci_cfg_read method (so a value of 0x12345678 is returned as 0x78563412)
A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written.
- Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified.
Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev.
read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106.
write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106.
The PCI controllers (bandit, chaos, mpc106) need to encode the offset (0,1,2,3) into the reg_offs parameter passed to pci_cfg_read and pci_cfg_write so they can return or modify the correct bytes of the dword at reg_offs & 3.
The pci_cfg_read and pci_cfg_write methods extract the offset from reg_offs and report unaligned accesses.
pci_cfg_read uses pci_cfg_rev_read to read from the reg using the size and offset to determine which bytes to read.
pci_cfg_write uses pci_cfg_rev_write to write to the reg using the size and offset to determine which bytes to modify.
Other changes:
- for unimplemented config register reads and writes, bandit and ATIRage now includes offset and size (and value in the case of writes) in log warnings.
- for unimplemented config register reads and writes, pcidevice now includes offset in log warnings.
- pci_read and pci_write of mpc106 require an offset parameter since config_addr does not contain the offset (it is always a multiple of 4). The offset is included in the log warninings for non-existent PCI devices.
- ATIRage uses pci_cfg_rev_read and pci_cfg_rev_write which correctly places user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
Notes:
- pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian.
