- Use interrupt source instead of IRQ ID in the IrqMap.
- Add a get_interrupt_controller method to mirror the set_interrupt_controller method.
- Have PCI hosts use pcihost_device_postinit to add PCI devices. This was moved from bandit's device_postinit and allows for duplicate devices by appending the slot to the registered device name.
- Fix interrupts of Pippin.
Fix interrupts of cmd646
- Make it work like other PCI devices.
- IntDetails is built into the pcibase base class.
- IntDetails is initialized by calling pci_interrupt.
- pci_interrupt checks the "enable interrupts" flag before doing an interrupt.
We do a linear scan in find_range (which is called on all TLB misses) to
find the entries. The largest and most frequently hit entry is the
system memory (which starts at 0). By ensuring that it's the first entry
in the list, we end up only doing one iteration through the loop.
- Add IOBusDevice (nvram_addr_hi_dev) for NVRAM addr hi.
- Add IOBusDevice (nvram_dev) for NVRAM data.
- Make all IOBusDevices use the same code.
- Log error if 4 least significant bits of offset are not zero.
- Correctly byte swap the value before passing it to the IOBusDevice.
- When reading, duplicate the bytes in a word or dword like a real Power Mac does.
Grackle allows attaching different PCI devices. This change allows attach multiple of the same PCI device. To make the name unique in the machine map, the name of the PCI slot is appended to the device name.
pci_conv_rd_data can be used to handle unaligned or 64-bit accesses in mmio regions if it's modified to include the next 32-bit value.
For pci config accesses, grackle repeats the 32-bit value. bandit uses a seemingly random number for the next 32-bit value, but we'll make it work like grackle.
PCCard is used by PowerBook G3 Wallstreet in Open Firmware 2.0.1.
CardBus is probed in New World Macs starting from at least Open Firmware 4.1.9f1 sometime after Open Firmware 3.1.1.
- Create PCIBase from common stuff in PCIDevice.
- Add PCIBridgeBase. These have a primary bus number, secondary bus number, and subordinate bus number which are used to determine if PCI type 1 config cycle should be passed.
- Change PCIBridge to use PCIBridgeBase instead of PCIDevice.
- Add PCICardBusBridge which uses PCIBridgeBase.
