When fetching DMA command, make sure to convert little endian fields to host endianness (i.e. don't use memcpy).
When fetching DMA command, return the host address of the DMA command for LOAD_QUAD. Maybe this address should be cached whenever this->cmdptr changes?
When fetching DMA command, return whether the DMA command is writable.
For LOAD_QUAD, pass the address of the DMA command to xfer_quad.
Always log unexpected DMA command values.
Write full 32-bit value for LOAD_QUAD.
Write reqCount to resCount.
pci_conv_rd_data can be used to handle unaligned or 64-bit accesses in mmio regions if it's modified to include the next 32-bit value.
For pci config accesses, grackle repeats the 32-bit value. bandit uses a seemingly random number for the next 32-bit value, but we'll make it work like grackle.
PCCard is used by PowerBook G3 Wallstreet in Open Firmware 2.0.1.
CardBus is probed in New World Macs starting from at least Open Firmware 4.1.9f1 sometime after Open Firmware 3.1.1.
- Create PCIBase from common stuff in PCIDevice.
- Add PCIBridgeBase. These have a primary bus number, secondary bus number, and subordinate bus number which are used to determine if PCI type 1 config cycle should be passed.
- Change PCIBridge to use PCIBridgeBase instead of PCIDevice.
- Add PCICardBusBridge which uses PCIBridgeBase.
For example, Old World Macs have versions of Open Firmware that don't support 512 MB BARs correctly. They may attempt to set such a BAR to 0x90000000 (a 256 MB boundary) instead of 0xA0000000 (the next available 512 MB boundary).
Typing Control-C in Terminal app causes an interrupt signal that should enter the DPPC debugger but this only worked once since the signal handler never returned. Even if the signal handler reenabled the signal somehow, it calls enter_debugger recursively which is strange since the earlier calls to enter_debugger would never return.
Now the signal handler just sets a flag (power_on) which can be used to exit any loop (emulator loops, stepping loops, disassembly loops, dumping loops).
Main always calls enter_debugger now which calls the ppc_exec loop. The power_on flag will exit the ppc_exec loop to return to the debugger. Recursion of enter_debugger is eliminated except for calls to loguru's ABORT_F.
An enum power_off_reason is used to indicate why the power_on flag is set to false and to determine what happens next.
The TLBEntries allow converting virtual guest address to virtual host address but there's no easy way to get a guest physical address for debugging purposes.
Add a phys_tag field to fix that.
