/* DingusPPC - The Experimental PowerPC Macintosh emulator Copyright (C) 2018-22 divingkatae and maximum (theweirdo) spatium (Contact divingkatae#1017 or powermax#2286 on Discord for more info) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** Bandit ARBus-to-PCI Bridge emulation. */ #include "bandit.h" #include #include #include #include #include #include Bandit::Bandit(int bridge_num, std::string name) : PCIHost(), PCIDevice(name) { this->base_addr = 0xF0000000 + ((bridge_num & 3) << 25); MemCtrlBase *mem_ctrl = dynamic_cast (gMachineObj->get_comp_by_type(HWCompType::MEM_CTRL)); // add memory mapped I/O region for Bandit control registers // This region has the following layout: // base_addr + 0x000000 --> I/O space // base_addr + 0x800000 --> CONFIG_ADDR // base_addr + 0xC00000 --> CONFIG_DATA // base_addr + 0x1000000 --> pass-through memory space (not included below) mem_ctrl->add_mmio_region(base_addr, 0x01000000, this); // prepare the PCI config header this->vendor_id = PCI_VENDOR_APPLE; this->device_id = 0x0001; this->class_rev = 0x06000003; this->cache_ln_sz = 8; this->command = 0x16; // make several PCI config space registers read-only this->pci_wr_cmd = [](uint16_t cmd) {}; // command register this->pci_wr_cache_lnsz = [](uint8_t val) {}; // cache line size register } uint32_t Bandit::read(uint32_t reg_start, uint32_t offset, int size) { int fun_num; uint8_t reg_offs; uint32_t result, idsel; if (offset & BANDIT_CONFIG_SPACE) { if (offset & 0x00400000) { // access to the CONFIG_DATA pseudo-register causes a Config Cycle if (this->config_addr & BANDIT_CAR_TYPE) { LOG_F(WARNING, "%s: config cycle type 1 not supported yet", this->name.c_str()); return 0; } idsel = (this->config_addr >> 11) & 0x1FFFFFU; fun_num = (this->config_addr >> 8) & 7; reg_offs = this->config_addr & 0xFCU; if (!SINGLE_BIT_SET(idsel)) { LOG_F(ERROR, "%s: invalid IDSEL=0x%X passed", this->name.c_str(), idsel); return 0; } if (idsel == BANDIT_ID_SEL) { // access to myself result = this->pci_cfg_read(reg_offs, size); } else { if (this->dev_map.count(idsel)) { result = this->dev_map[idsel]->pci_cfg_read(reg_offs, size); } else { LOG_F( ERROR, "%s err: read attempt from non-existing PCI device %d \n", this->name.c_str(), idsel); result = 0; } } } else { result = this->config_addr; } } else { // I/O space access LOG_F(WARNING, "%s: I/O space write not implemented yet", this->name.c_str()); } return result; } void Bandit::write(uint32_t reg_start, uint32_t offset, uint32_t value, int size) { int fun_num; uint8_t reg_offs; uint32_t idsel; if (offset & BANDIT_CONFIG_SPACE) { if (offset & 0x00400000) { // access to the CONFIG_DATA pseudo-register causes a Config Cycle if (this->config_addr & BANDIT_CAR_TYPE) { LOG_F(WARNING, "%s: config cycle type 1 not supported yet", this->name.c_str()); return; } idsel = (this->config_addr >> 11) & 0x1FFFFFU; fun_num = (this->config_addr >> 8) & 7; reg_offs = this->config_addr & 0xFCU; if (!SINGLE_BIT_SET(idsel)) { LOG_F(ERROR, "%s: invalid IDSEL=0x%X passed", this->name.c_str(), idsel); return; } if (idsel == BANDIT_ID_SEL) { // access to myself this->pci_cfg_write(reg_offs, value, size); return; } if (this->dev_map.count(idsel)) { this->dev_map[idsel]->pci_cfg_write(reg_offs, value, size); } else { LOG_F( ERROR, "%s err: write attempt to non-existing PCI device %d \n", this->name.c_str(), idsel); } } else { this->config_addr = BYTESWAP_32(value); } } else { // I/O space access LOG_F(WARNING, "%s: I/O space write not implemented yet", this->name.c_str()); } }