mirror of
https://github.com/dingusdev/dingusppc.git
synced 2024-11-18 22:05:51 +00:00
190718fbee
BAR 0 exists on a real Power Mac 8600 and the dingusppc 7500.
On a Power Mac 8600, the initial value is 0x84000003. In Open Firmware, you can write to all bits of the BAR and read the value back except the 2 least significant bits are always %11. Bit 0 indicates I/O space. Bit 1 is reserved and should be zero so maybe this is not a real I/O space BAR. 0x8400000 is written to the BAR by Open Firmware. It doesn't look like a normal I/O address which are usually 16 bits.
On the emulated 7500, 0x02000000 is written to the BAR by Open Firmware sometime during probe-all. The BAR did not behave as it does in the Power Mac 8600. This commit fixes that.
Two questions remain:
1) Which fcode writes to the BAR? Is it the probe fcode or is it the control fcode? There's no config-_! in the control fcode.
2) What is the purpose of the BAR? Writing to it can cause a hang. The testbits code below seems to succeed - it restores the original value after reading the result of testing each bit and before displaying the result. The values shown for the MSB (0x84 on the 8600 and 0x02 on the 7500) could be three flag bits.
```
dev vci0
: testbits { adr ; org }
cr
adr config-l@ dup -> org ." original : " 8 u.r cr
20 0 do
1 1f i - << dup 8 u.r ." : "
adr config-l!
adr config-l@
org adr config-l!
8 u.r cr
loop
;
15810 testbits \ 15810 is the address of the BAR on the emulated 7500.
```
145 lines
4.3 KiB
C++
145 lines
4.3 KiB
C++
/*
|
|
DingusPPC - The Experimental PowerPC Macintosh emulator
|
|
Copyright (C) 2018-22 divingkatae and maximum
|
|
(theweirdo) spatium
|
|
|
|
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/** @file TNT on-board video output definitions. */
|
|
|
|
#ifndef CONTROL_VIDEO_H
|
|
#define CONTROL_VIDEO_H
|
|
|
|
#include <devices/common/i2c/athens.h>
|
|
#include <devices/common/pci/pcidevice.h>
|
|
#include <devices/ioctrl/macio.h>
|
|
#include <devices/video/displayid.h>
|
|
#include <devices/video/videoctrl.h>
|
|
|
|
#include <cinttypes>
|
|
#include <memory>
|
|
|
|
#define TEST_STROBE (1 << 3) // strobe bit
|
|
|
|
// Memory-mapped registers.
|
|
namespace ControlRegs {
|
|
|
|
enum ControlRegs : int {
|
|
CUR_LINE = 0x00, // current active video line
|
|
VFPEQ = 0x01,
|
|
VFP = 0x02,
|
|
VAL = 0x03, // vertical active line
|
|
VBP = 0x04,
|
|
VBPEQ = 0x05, // begin of th vertical back porch with equalization
|
|
VSYNC = 0x06,
|
|
VHLINE = 0x07,
|
|
PIPED = 0x08,
|
|
HPIX = 0x09,
|
|
HFP = 0x0A,
|
|
HAL = 0x0B, // horizontal active line
|
|
HBWAY = 0x0C,
|
|
HSP = 0x0D,
|
|
HEQ = 0x0E,
|
|
HLFLN = 0x0F,
|
|
HSERR = 0x10,
|
|
CNTTST = 0x11, // Swatch counter test
|
|
TEST = 0x12,
|
|
GBASE = 0x13, // Graphics base address
|
|
ROW_WORDS = 0x14,
|
|
MON_SENSE = 0x15, // Monitor sense control & status
|
|
ENABLE = 0x16,
|
|
GSC_DIVIDE = 0x17, // graphics clock divide count
|
|
REFRESH_COUNT = 0x18,
|
|
INT_ENABLE = 0x19,
|
|
INT_STATUS = 0x1A
|
|
};
|
|
|
|
}; // namespace ControlRegs
|
|
|
|
namespace RadacalRegs {
|
|
|
|
enum RadacalRegs : uint8_t {
|
|
ADDRESS = 0, // address register
|
|
CURSOR_DATA = 1, // cursor data
|
|
MULTI = 2, // multipurpose section
|
|
CLUT_DATA = 3, // color palette data
|
|
|
|
// multipurpose section registers
|
|
CURSOR_POS_HI = 0x10, // cursor position, high-order byte
|
|
CURSOR_POS_LO = 0x11, // cursor position, low-order byte
|
|
MISC_CTRL = 0x20, // miscellaneus control bits
|
|
DBL_BUF_CTRL = 0x21, // double buffer control bits
|
|
};
|
|
|
|
}; // namespace RadacalRegs
|
|
|
|
class ControlVideo : public PCIDevice, public VideoCtrlBase, public IobusDevice {
|
|
public:
|
|
ControlVideo();
|
|
~ControlVideo() = default;
|
|
|
|
static std::unique_ptr<HWComponent> create() {
|
|
return std::unique_ptr<ControlVideo>(new ControlVideo());
|
|
}
|
|
|
|
// MMIODevice methods
|
|
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
|
|
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
|
|
|
|
protected:
|
|
void notify_bar_change(int bar_num);
|
|
|
|
void enable_display();
|
|
void disable_display();
|
|
|
|
// IobusDevice methods for RaDACal
|
|
uint16_t iodev_read(uint32_t address);
|
|
void iodev_write(uint32_t address, uint16_t value);
|
|
|
|
private:
|
|
std::unique_ptr<DisplayID> display_id;
|
|
std::unique_ptr<AthensClocks> clk_gen;
|
|
|
|
std::unique_ptr<uint8_t[]> vram_ptr;
|
|
|
|
uint32_t vram_size;
|
|
uint32_t io_base = 0;
|
|
uint32_t vram_base = 0;
|
|
uint32_t regs_base = 0;
|
|
uint32_t prev_test = 0x433;
|
|
uint32_t test = 0;
|
|
uint32_t clock_divider = 0;
|
|
uint32_t row_words = 0;
|
|
uint32_t fb_base = 0;
|
|
uint16_t swatch_params[16];
|
|
int test_shift = 0;
|
|
uint8_t cur_mon_id = 0;
|
|
uint8_t flags = 0;
|
|
uint8_t int_enable = 0;
|
|
|
|
// RaDACal internal state
|
|
uint8_t rad_addr = 0;
|
|
uint8_t rad_cr = 0;
|
|
uint8_t rad_dbl_buf_cr = 0;
|
|
uint8_t rad_cur_pos_hi = 0;
|
|
uint8_t rad_cur_pos_lo = 0;
|
|
uint8_t comp_index;
|
|
uint8_t clut_color[3];
|
|
};
|
|
|
|
#endif // CONTROL_VIDEO_H
|