dingusppc/devices/common/viacuda.h

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-22 divingkatae and maximum
                      (theweirdo)     spatium

(Contact divingkatae#1017 or powermax#2286 on Discord for more info)

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <https://www.gnu.org/licenses/>.
*/

/** VIA-CUDA combo device emulation.

    Versatile interface adapter (VIA) is an old I/O controller that can be found
    in nearly every Macintosh computer. In the 68k era, VIA was used to control
    various peripheral devices. In a Power Macintosh, its function is limited
    to the I/O interface with the Cuda MCU. I therefore decided to put VIA
    emulation code here.

    Cuda MCU is a multipurpose IC built around a custom version of the Motorola
    MC68HC05 microcontroller. It provides several functions including:
    - Apple Desktop Bus (ADB) master
    - I2C bus master
    - Realtime clock (RTC)
    - parameter RAM (first generation of the Power Macintosh)
    - power management

    MC68HC05 doesn't provide any dedicated hardware for serial communication
    protocols. All signals required for ADB and I2C will be generated by Cuda
    firmware using bit banging (https://en.wikipedia.org/wiki/Bit_banging).
*/

#ifndef VIACUDA_H
#define VIACUDA_H

#include <devices/common/adb/adb.h>
#include <devices/common/hwcomponent.h>
#include <devices/common/hwinterrupt.h>
#include <devices/common/i2c/i2c.h>
#include <devices/common/nvram.h>

#include <memory>

#define VIA_CLOCK_HZ 783360

/** VIA register offsets. */
enum {
    VIA_B    = 0x00, /* input/output register B */
    VIA_A    = 0x01, /* input/output register A */
    VIA_DIRB = 0x02, /* direction B */
    VIA_DIRA = 0x03, /* direction A */
    VIA_T1CL = 0x04, /* low-order  timer 1 counter */
    VIA_T1CH = 0x05, /* high-order timer 1 counter */
    VIA_T1LL = 0x06, /* low-order  timer 1 latches */
    VIA_T1LH = 0x07, /* high-order timer 1 latches */
    VIA_T2CL = 0x08, /* low-order  timer 2 latches */
    VIA_T2CH = 0x09, /* high-order timer 2 counter */
    VIA_SR   = 0x0A, /* shift register */
    VIA_ACR  = 0x0B, /* auxiliary control register */
    VIA_PCR  = 0x0C, /* periheral control register */
    VIA_IFR  = 0x0D, /* interrupt flag register */
    VIA_IER  = 0x0E, /* interrupt enable register */
    VIA_ANH  = 0x0F, /* input/output register A, no handshake */
};

/** VIA interrupt flags */
enum {
    VIA_IF_CA2 = 1 << 0,
    VIA_IF_CA1 = 1 << 1,
    VIA_IF_SR  = 1 << 2,
    VIA_IF_CB2 = 1 << 3,
    VIA_IF_CB1 = 1 << 4,
    VIA_IF_T2  = 1 << 5,
    VIA_IF_T1  = 1 << 6
};

enum class ViaLine {
    CA1,
    CA2,
    CB1,
    CB2
};

/** Cuda communication signals. */
enum {
    CUDA_TIP     = 0x20, /* transaction in progress: 0 - true, 1 - false */
    CUDA_BYTEACK = 0x10, /* byte acknowledge: 0 - true, 1 - false */
    CUDA_TREQ    = 0x08  /* Cuda requests transaction from host */
};

/** Cuda packet types. */
enum {
    CUDA_PKT_ADB    = 0,
    CUDA_PKT_PSEUDO = 1,
    CUDA_PKT_ERROR  = 2,
    CUDA_PKT_TICK   = 3,
    CUDA_PKT_POWER  = 4
};

/** Cuda pseudo commands. */
enum {
    CUDA_WARM_START          = 0x00, /* warm start */
    CUDA_START_STOP_AUTOPOLL = 0x01, /* start/stop device auto-polling */
    CUDA_READ_MCU_MEM        = 0x02, /* read internal Cuda memory */
    CUDA_GET_REAL_TIME       = 0x03, /* get real time */
    CUDA_READ_PRAM           = 0x07, /* read parameter RAM */
    CUDA_WRITE_MCU_MEM       = 0x08, /* write internal Cuda memory */
    CUDA_SET_REAL_TIME       = 0x09, /* set real time */
    CUDA_POWER_DOWN          = 0x0A, /* power down system */
    CUDA_WRITE_PRAM          = 0x0C, /* write parameter RAM */
    CUDA_MONO_STABLE_RESET   = 0x0D, /* mono stable reset */
    CUDA_RESTART_SYSTEM      = 0x11, /* restart system */
    CUDA_FILE_SERVER_FLAG    = 0x13, /* set file server flag */
    CUDA_SET_AUTOPOLL_RATE   = 0x14, /* set auto-polling rate */
    CUDA_GET_AUTOPOLL_RATE   = 0x16, /* get auto-polling rate */
    CUDA_SET_DEVICE_LIST     = 0x19, /* set device list */
    CUDA_GET_DEVICE_LIST     = 0x1A, /* get device list */
    CUDA_ONE_SECOND_MODE     = 0x1B, /* one second interrupt mode */
    CUDA_READ_WRITE_I2C      = 0x22, /* read/write I2C device */
    CUDA_COMB_FMT_I2C        = 0x25, /* combined format I2C transaction */
    CUDA_OUT_PB0             = 0x26, /* output one bit to Cuda's PB0 line */
};

/** Cuda error codes. */
enum {
    CUDA_ERR_BAD_PKT  = 1, /* invalid packet type */
    CUDA_ERR_BAD_CMD  = 2, /* invalid pseudo command */
    CUDA_ERR_BAD_SIZE = 3, /* invalid packet size */
    CUDA_ERR_BAD_PAR  = 4, /* invalid parameter */
    CUDA_ERR_I2C      = 5  /* invalid I2C data or no acknowledge */
};

#define CUDA_IN_BUF_SIZE    256

/** PRAM addresses within Cuda's internal memory */
#define CUDA_PRAM_START 0x100 // starting address of PRAM
#define CUDA_PRAM_END   0x1FF // last byte of PRAM
#define CUDA_ROM_START  0xF00 // starting address of ROM containing Cuda FW

/** Latest Cuda Firmware version. */
#define CUDA_FW_VERSION_MAJOR   0x0002
#define CUDA_FW_VERSION_MINOR   0x0029

class ViaCuda : public HWComponent, public I2CBus {
public:
    ViaCuda();
    ~ViaCuda() = default;

    // HWComponent methods
    int device_postinit();

    uint8_t read(int reg);
    void write(int reg, uint8_t value);

    void assert_ctrl_line(ViaLine line);

private:
    // VIA virtual HW registers
    uint8_t via_regs[16];

    float via_clk_dur; // one VIA clock duration = 1,27655 us

    // VIA internal state
    uint32_t sr_timer_id = 0;
    bool     sr_timer_on = false;

    // timer 1 state
    bool     t1_active;
    uint16_t t1_counter;
    uint32_t t1_timer_id = 0;
    uint64_t t1_start_time = 0;

    // timer 2 state
    bool     t2_active;
    uint16_t t2_counter;
    uint32_t t2_timer_id = 0;
    uint64_t t2_start_time = 0;

    // VIA interrupt related stuff
    InterruptCtrl* int_ctrl;
    uint32_t       irq_id;
    uint8_t        _via_ifr;
    uint8_t        _via_ier;
    uint8_t        irq;

    /* Cuda state. */
    uint8_t  old_tip;
    uint8_t  old_byteack;
    uint8_t  treq;
    uint8_t  in_buf[CUDA_IN_BUF_SIZE];
    int32_t  in_count;
    uint8_t  out_buf[16];
    int32_t  out_count;
    int32_t  out_pos;
    uint8_t  poll_rate;
    int32_t  real_time = 0;
    bool     file_server;
    uint16_t device_mask = 0;

    bool        is_open_ended; // true if current transaction is open-ended
    uint8_t     curr_i2c_addr; // current I2C address
    uint8_t     cur_pram_addr; // current PRAM address, range 0...FF

    void (ViaCuda::*out_handler)(void);
    void (ViaCuda::*next_out_handler)(void);

    std::unique_ptr<NVram>   pram_obj;
    std::unique_ptr<ADB_Bus> adb_bus;

    // VIA methods
    void print_enabled_ints(); // print enabled VIA interrupts and their sources
    void init_ints();
    void update_irq();
    void assert_sr_int();
    void assert_t1_int();
    void assert_t2_int();
    void schedule_sr_int(uint64_t timeout_ns);
    uint16_t calc_counter_val(const uint16_t last_val, const uint64_t& last_time);

    // CUDA methods
    void cuda_init();
    bool ready();
    void write(uint8_t new_state);
    void response_header(uint32_t pkt_type, uint32_t pkt_flag);
    void error_response(uint32_t error);
    void process_packet();
    void process_adb_command(uint8_t cmd_byte, int data_count);
    void pseudo_command(int cmd, int data_count);

    void null_out_handler(void);
    void pram_out_handler(void);
    void out_buf_handler(void);
    void i2c_handler(void);

    /* I2C related methods */
    void i2c_simple_transaction(uint8_t dev_addr, const uint8_t* in_buf, int in_bytes);
    void i2c_comb_transaction(
        uint8_t dev_addr, uint8_t sub_addr, uint8_t dev_addr1, const uint8_t* in_buf, int in_bytes);
};

#endif /* VIACUDA_H */