dingusppc/devices/common/scsi/mesh.h
2023-08-09 01:40:09 +02:00

160 lines
3.7 KiB
C++

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-23 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
/** @file MESH (Macintosh Enhanced SCSI Hardware) controller definitions. */
#ifndef MESH_H
#define MESH_H
#include <devices/common/hwcomponent.h>
#include <devices/common/hwinterrupt.h>
#include <devices/common/scsi/scsi.h>
#include <cinttypes>
#include <memory>
// Chip ID returned by the MESH cell inside the Heathrow ASIC
#define HeathrowMESHID 4
namespace MeshScsi {
// MESH registers offsets.
enum MeshReg : uint8_t {
XferCount0 = 0,
XferCount1 = 1,
FIFO = 2,
Sequence = 3,
BusStatus0 = 4,
BusStatus1 = 5,
FIFOCount = 6,
Exception = 7,
Error = 8,
IntMask = 9,
Interrupt = 0xA,
SourceID = 0xB,
DestID = 0xC,
SyncParms = 0xD,
MeshID = 0xE,
SelTimeOut = 0xF
};
// MESH Sequencer commands.
enum SeqCmd : uint8_t {
NoOperation = 0,
Arbitrate = 1,
Select = 2,
DisReselect = 0xD,
ResetMesh = 0xE,
FlushFIFO = 0xF,
};
// Exception register bits.
enum {
EXC_SEL_TIMEOUT = 1 << 0,
EXC_PHASE_MM = 1 << 1,
EXC_ARB_LOST = 1 << 2,
};
// Interrupt register bits.
enum {
INT_CMD_DONE = 1 << 0,
INT_EXCEPTION = 1 << 1,
INT_ERROR = 1 << 2,
INT_MASK = INT_CMD_DONE | INT_EXCEPTION | INT_ERROR
};
enum SeqState : uint32_t {
IDLE = 0,
BUS_FREE,
ARB_BEGIN,
ARB_END,
SEL_BEGIN,
SEL_END,
SEND_MSG,
SEND_CMD,
CMD_COMPLETE,
XFER_BEGIN,
XFER_END,
SEND_DATA,
RCV_DATA,
RCV_STATUS,
RCV_MESSAGE,
};
}; // namespace MeshScsi
class MeshController : public HWComponent {
public:
MeshController(uint8_t mesh_id) {
supports_types(HWCompType::SCSI_HOST | HWCompType::SCSI_DEV);
this->chip_id = mesh_id;
this->reset(true);
};
~MeshController() = default;
static std::unique_ptr<HWComponent> create() {
return std::unique_ptr<MeshController>(new MeshController(HeathrowMESHID));
}
// MESH registers access
uint8_t read(uint8_t reg_offset);
void write(uint8_t reg_offset, uint8_t value);
// HWComponent methods
int device_postinit();
protected:
void reset(bool is_hard_reset);
void perform_command(const uint8_t cmd);
void seq_defer_state(uint64_t delay_ns);
void sequencer();
void update_irq();
private:
uint8_t chip_id;
uint8_t int_mask;
uint8_t int_stat = 0;
uint8_t sync_params;
uint8_t src_id;
uint8_t dst_id;
uint8_t cur_cmd;
uint8_t error;
uint8_t fifo_cnt;
uint8_t exception;
uint32_t xfer_count;
ScsiBus* bus_obj;
uint16_t bus_stat;
// Sequencer state
uint32_t seq_timer_id;
uint32_t cur_state;
uint32_t next_state;
// interrupt related stuff
InterruptCtrl* int_ctrl = nullptr;
uint32_t irq_id = 0;
uint8_t irq = 0;
};
#endif // MESH_H