mirror of
https://github.com/dingusdev/dingusppc.git
synced 2024-09-05 14:29:33 +00:00
120 lines
4.5 KiB
Markdown
120 lines
4.5 KiB
Markdown
Using a combination of a 6522 along with some integrated circuits, the VIA Cuda is a microcontroller that heavily controls system operations. It's largely similar to Egret (used in many 68k Macs), but removes some commands.
|
|
|
|
The usual offset for a VIA Cuda is IOBase (ex.: 0xF3000000 for Power Mac G3 Beige) + 0x16000. The registers are spaced out by 0x200 bytes on the Heathrow.
|
|
|
|
# Usage
|
|
|
|
The VIA Cuda is emulated in all Power Macs through an interrupt controller. Early Power Macs also used the Parameter RAM.
|
|
|
|
Additionally, nodes are included for ADB peripherals, Parameter RAM, Real-Time Clocks, and Power Management.
|
|
|
|
It can be run either synchronously or asynchronously.
|
|
|
|
However, the CUDA is also slower than the CPU, thus causing a delay that the OS expects.
|
|
|
|
# Registers
|
|
|
|
Within the emulated CUDA, these registers are spaced apart by 0x200 bytes. Apple themselves recommended avoiding the usage of Handshake Data A.
|
|
|
|
| Register Name |Abbreviation| Offset |
|
|
|:-------------------------:|:----------:|:------:|
|
|
| Data B | ORB | 0x0 |
|
|
| Handshake Data A | ORA(H) | 0x1 |
|
|
| Data Direction B | DIRB | 0x2 |
|
|
| Data Direction A | DIRA | 0x3 |
|
|
| Timer 1 Counter Low | T1C | 0x4 |
|
|
| Timer 1 Counter High | T1CH | 0x5 |
|
|
| Timer 1 Latch Low | T1L | 0x6 |
|
|
| Timer 1 Latch High | T1LH | 0x7 |
|
|
| Timer 2 Counter Low | T2C | 0x8 |
|
|
| Timer 2 Counter High | T2CH | 0x9 |
|
|
| Shift | SR | 0xA |
|
|
| Auxiliary Control | ACR | 0xB |
|
|
| Peripheral Control | PCR | 0xC |
|
|
| Interrupt Flag | IFE | 0xD |
|
|
| Interrupt Enable | IER | 0xE |
|
|
| Data A | ORA | 0xF |
|
|
|
|
## Data A
|
|
|
|
| Register Bit | Bit Mask |
|
|
|:----------------:|:--------:|
|
|
| Drive Select | 0x10 |
|
|
| Disk Head Select | 0x20 |
|
|
|
|
## Auxiliary Control
|
|
|
|
| Register Bit | Bit Mask |
|
|
|:---------------------------------:|:--------:|
|
|
| Port A Latch | 0x1 |
|
|
| Port B Latch | 0x2 |
|
|
| Timer 2, control | 0x20 |
|
|
| Timer 1, continuous counting | 0x40 |
|
|
| Timer 1, drives PB7 | 0x80 |
|
|
|
|
## Interrupt Enable
|
|
|
|
| Register Bit | Bit Mask |
|
|
|:--------------:|:--------:|
|
|
| CA2 | 0x1 |
|
|
| CA1 | 0x2 |
|
|
| Shift Register | 0x2 |
|
|
| CB2 | 0x8 |
|
|
| CB1 | 0x10 |
|
|
| Timer 2 | 0x20 |
|
|
| Timer 1 | 0x40 |
|
|
| Set interrupt | 0x80 |
|
|
|
|
# Packet Types
|
|
|
|
| Hex | Packet Type |
|
|
|:-------------:|:----------------------:|
|
|
| 0x00 | ADB |
|
|
| 0x01 | Pseudo |
|
|
| 0x02 | Error |
|
|
| 0x03 | Timer |
|
|
| 0x04 | Power |
|
|
| 0x05 | Mac II |
|
|
|
|
|
|
# Device Commands
|
|
|
|
| Hex | Device Command |
|
|
|:-------------:|:----------------------:|
|
|
| 0x00 | Reset Bus |
|
|
| 0x01 | Flush ADB |
|
|
| 0x08 | Write ADB |
|
|
| 0x0C | Read ADB |
|
|
|
|
# Pseudo Commands
|
|
|
|
| Hex | Command Name |
|
|
|:-------------:|:----------------------:|
|
|
| 0x00 | WARM_START |
|
|
| 0x01 | START_STOP_AUTO_POLL |
|
|
| 0x02 | GET_6805_ADDRESS |
|
|
| 0x03 | GET_REAL_TIME |
|
|
| 0x07 | GET_PRAM |
|
|
| 0x08 | SET_6805_ADDRESS |
|
|
| 0x09 | SET_REAL_TIME |
|
|
| 0x0A | POWER_DOWN |
|
|
| 0x0B | SET_POWER_UPTIME |
|
|
| 0x0C | SET_PRAM |
|
|
| 0x0D | MONO_STABLE_RESET |
|
|
| 0x0E | SEND_DFAC |
|
|
| 0x10 | BATTERY_SWAP_SENSE |
|
|
| 0x11 | RESTART_SYSTEM |
|
|
| 0x12 | SET_IPL_LEVEL |
|
|
| 0x13 | FILE_SERVER_FLAG |
|
|
| 0x14 | SET_AUTO_RATE |
|
|
| 0x16 | GET_AUTO_RATE |
|
|
| 0x19 | SET_DEVICE_LIST |
|
|
| 0x1A | GET_DEVICE_LIST |
|
|
| 0x1B | SET_ONE_SECOND_MODE |
|
|
| 0x21 | SET_POWER_MESSAGES |
|
|
| 0x22 | GET_SET_IIC |
|
|
| 0x23 | ENABLE_DISABLE_WAKEUP |
|
|
| 0x24 | TIMER_TICKLE |
|
|
| 0X25 | COMBINED_FORMAT_IIC |
|
|
| 0x26 | (UNDOCUMENTED!) |
|