mirror of
https://github.com/dingusdev/dingusppc.git
synced 2024-12-25 03:29:38 +00:00
162 lines
6.3 KiB
C++
162 lines
6.3 KiB
C++
/*
|
|
DingusPPC - The Experimental PowerPC Macintosh emulator
|
|
Copyright (C) 2018-24 divingkatae and maximum
|
|
(theweirdo) spatium
|
|
|
|
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/** @file TNT on-board video output definitions. */
|
|
|
|
#ifndef CONTROL_VIDEO_H
|
|
#define CONTROL_VIDEO_H
|
|
|
|
#include <devices/common/i2c/athens.h>
|
|
#include <devices/common/pci/pcidevice.h>
|
|
#include <devices/video/appleramdac.h>
|
|
#include <devices/video/displayid.h>
|
|
#include <devices/video/videoctrl.h>
|
|
|
|
#include <cinttypes>
|
|
#include <memory>
|
|
|
|
// Memory-mapped registers.
|
|
namespace ControlRegs {
|
|
|
|
enum ControlRegs : int {
|
|
// 512 bytes, repeats 8 times for 4K total.
|
|
// A register every 16 bytes, little endian, 32 bits, repeats 4 times.
|
|
CUR_LINE = 0x00, // current active video line (ro) 12 bits
|
|
VFPEQ = 0x01, // vertical front porch with EQ (rw) 12 bits
|
|
VFP = 0x02, // vertical front porch (rw) 12 bits
|
|
VAL = 0x03, // vertical active line (rw) 12 bits
|
|
VBP = 0x04, // vertical back porch (rw) 12 bits
|
|
VBPEQ = 0x05, // vertical back porch with EQ (rw) 12 bits
|
|
VSYNC = 0x06, // vertical sync starting point (rw) 12 bits
|
|
VHLINE = 0x07, // vertical half line (rw) 12 bits
|
|
PIPE_DELAY = 0x08, // controls pixel pipe delay (rw) 12 bits
|
|
HPIX = 0x09, // horizontal pixel count (rw) 12 bits
|
|
HFP = 0x0A, // horizontal front porch (rw) 12 bits
|
|
HAL = 0x0B, // horizontal active line (rw) 12 bits
|
|
HBWAY = 0x0C, // horizontal breezeway (rw) 12 bits
|
|
HSP = 0x0D, // horizontal sync starting point (rw) 12 bits
|
|
HEQ = 0x0E, // horizontal equalization (rw) 12 bits
|
|
HLFLN = 0x0F, // horizontal half line (rw) 12 bits
|
|
HSERR = 0x10, // horizontal serration (rw) 12 bits
|
|
CNTTST = 0x11, // Swatch counter test value (rw) 12 bits
|
|
SWATCH_CTRL = 0x12, // Swatch timing generator control (rw) 11 bits
|
|
GBASE = 0x13, // graphics base address (rw) 22 bits, 32 byte aligned
|
|
ROW_WORDS = 0x14, // framebuffer pitch (rw) 15 bits, 32 byte aligned
|
|
MON_SENSE = 0x15, // Monitor sense control & status (rw) 9 bits
|
|
MISC_ENABLES = 0x16, // controls chip's features (rw) 12 bits
|
|
GSC_DIVIDE = 0x17, // graphics clock divide count (rw) 2 bits
|
|
REFRESH_COUNT = 0x18, // VRAM refresh counter (rw) 10 bits
|
|
INT_ENABLE = 0x19, // interrupt enable bits (rw) 4 bits
|
|
INT_STATUS = 0x1A, // interrupt status bits (ro) 3 bits
|
|
};
|
|
|
|
}; // namespace ControlRegs
|
|
|
|
// Bit definitions for the video timing generator (Swatch) control register.
|
|
enum {
|
|
RESET_TIMING = 1 << 3, // toggle this bit to change timing parameters
|
|
DISABLE_TIMING = 1 << 10, // 1 - disable video timing, 0 - enable it
|
|
};
|
|
|
|
// Bit definitions for MISC_ENABLES register.
|
|
enum {
|
|
SCAN_CONTROL = 1 << 0, // 0 - interlaced, 1 - progressive
|
|
FB_ENDIAN_LITTLE = 1 << 1, // framebuffer endianness: 0 - big, 1 - little
|
|
VRAM_WIDE_MODE = 1 << 6, // VRAM bus width: 1 - 128bit, 0 - 64bit
|
|
BLANK_DISABLE = 1 << 11, // 0 - enable blanking, 1 - disable it
|
|
};
|
|
|
|
// Bit definitions for INT_ENABLE & INT_STATUS registers.
|
|
enum {
|
|
VBL_IRQ_CLR = 1 << 3, // VBL interrupt clear bit (INT_ENABLE)
|
|
VBL_IRQ_EN = 1 << 2, // VBL interrupt enable bit (INT_ENABLE)
|
|
VBL_IRQ_STAT = 1 << 2, // VBL interrupt status bit (INT_STATUS)
|
|
};
|
|
|
|
namespace RadacalRegs {
|
|
|
|
enum RadacalRegs : uint8_t {
|
|
ADDRESS = 0, // address register
|
|
CURSOR_CLUT = 1, // cursor palette data
|
|
MULTI = 2, // multipurpose section
|
|
CLUT_DATA = 3, // color palette data
|
|
|
|
// multipurpose section registers
|
|
CURSOR_POS_HI = 0x10, // cursor position, high-order byte
|
|
CURSOR_POS_LO = 0x11, // cursor position, low-order byte
|
|
MISC_CTRL = 0x20, // miscellaneus control bits
|
|
DBL_BUF_CTRL = 0x21, // double buffer control bits
|
|
TEST_CTRL = 0x22, // enable/disable DAC tests
|
|
};
|
|
|
|
}; // namespace RadacalRegs
|
|
|
|
class ControlVideo : public PCIDevice, public VideoCtrlBase {
|
|
public:
|
|
ControlVideo();
|
|
~ControlVideo() = default;
|
|
|
|
static std::unique_ptr<HWComponent> create() {
|
|
return std::unique_ptr<ControlVideo>(new ControlVideo());
|
|
}
|
|
|
|
// MMIODevice methods
|
|
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
|
|
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
|
|
|
|
protected:
|
|
void notify_bar_change(int bar_num);
|
|
|
|
void enable_display();
|
|
void disable_display();
|
|
|
|
// HWComponent methods
|
|
int device_postinit();
|
|
|
|
private:
|
|
std::unique_ptr<DisplayID> display_id;
|
|
std::unique_ptr<AthensClocks> clk_gen;
|
|
std::unique_ptr<AppleRamdac> radacal = nullptr;
|
|
|
|
std::unique_ptr<uint8_t[]> vram_ptr;
|
|
|
|
uint32_t vram_size;
|
|
uint32_t io_base = 0;
|
|
uint32_t vram_base = 0;
|
|
uint32_t regs_base = 0;
|
|
uint32_t swatch_ctrl = 0;
|
|
bool display_enabled = false;
|
|
uint32_t clock_divider = 0;
|
|
uint32_t row_words = 0;
|
|
uint32_t fb_base = 0;
|
|
uint16_t swatch_params[16];
|
|
int strobe_counter = 0;
|
|
uint8_t num_banks = 0;
|
|
uint8_t cur_mon_id = 0;
|
|
uint8_t enables = 0;
|
|
uint8_t int_enable = 0;
|
|
uint8_t int_status = 0;
|
|
uint8_t last_int_status = -1;
|
|
int last_int_status_read_count = 0;
|
|
};
|
|
|
|
#endif // CONTROL_VIDEO_H
|