Macintosh-Tools/dingusppc
1
0
Fork 0
mirror of https://github.com/dingusdev/dingusppc.git synced 2024-05-28 17:41:40 +00:00
Code Issues Projects Releases Wiki Activity
f92cb92353
dingusppc/devices/common/scsi/sc53c94.h
joevt 8a1055ed1b sc53c94: Add DBDMA support. 
- For pdm/amic, real_dma_xfer is called when SCSI_DMA_Ctrl has the run bit set.
- For tnt/grandcentral, dma_wait is called when the DBDMA is started (run bit is set). It will call real_dma_xfer when the phase and sequence are DATA_IN/RCV_DATA or DATA_OUT/SEND_DATA.
- dma_wait and real_dma_xfer uses a one shot timer instead of a loop to continue doing DMA while also giving time to the CPU. This and the above changes handles the case where the DBDMA is started before setting up the transfer phase and sequence.
- dma_stop will stop the one shot timer when the DBDMA channel is stopped.
2024-04-03 19:19:42 -07:00

299 lines
9.4 KiB
C++
Raw Blame History

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-24 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
/** @file NCR53C94/Am53CF94 SCSI controller definitions. */
/* NOTE: Power Macintosh computers don't have a real NCR 53C94 chip.
The corresponding functionality is provided by the 53CF94 compatible
cell in the custom Curio IC (Am79C950).
*/
#ifndef SC_53C94_H
#define SC_53C94_H
#include <devices/common/scsi/scsi.h>
#include <devices/common/dbdma.h>
#include <cinttypes>
#include <functional>
#include <memory>
class InterruptCtrl;
/** 53C94 read registers */
namespace Read {
enum Reg53C94 : uint8_t {
Xfer_Cnt_LSB = 0, // Current Transfer Count Register LSB
Xfer_Cnt_MSB = 1, // Current Transfer Count Register MSB
FIFO = 2, // FIFO Register
Command = 3, // Command Register
Status = 4, // Status Register
Int_Status = 5, // Interrupt Status Register
Seq_Step = 6, // Internal State Register
FIFO_Flags = 7, // Current FIFO/Internal State Register
Config_1 = 8, // Control Register 1
//
//
Config_2 = 0xB, // Control Register 2
Config_3 = 0xC, // Control Register 3
Config_4 = 0xD, // Control Register 4
Xfer_Cnt_Hi = 0xE, // Current Transfer Count Register High ; Am53CF94 extension
//
};
};
/** 53C94 write registers */
namespace Write {
enum Reg53C94 : uint8_t {
Xfer_Cnt_LSB = 0, // Start Transfer Count Register LSB
Xfer_Cnt_MSB = 1, // Start Transfer Count Register MSB
FIFO = 2, // FIFO Register
Command = 3, // Command Register
Dest_Bus_ID = 4, // SCSI Destination ID Register (DID)
Sel_Timeout = 5, // SCSI Timeout Register
Sync_Period = 6, // Synchronous Transfer Period Register
Sync_Offset = 7, // Synchronous Offset Register
Config_1 = 8, // Control Register 1
Clock_Factor = 9, // Clock Factor Register
Test_Mode = 0xA, // Forced Test Mode Register
Config_2 = 0xB, // Control Register 2
Config_3 = 0xC, // Control Register 3
Config_4 = 0xD, // Control Register 4 ; Am53CF94 extension
Xfer_Cnt_Hi = 0xE, // Start Transfer Count Register High ; Am53CF94 extension
Data_Align = 0xF, // Data Alignment Register
};
};
/** NCR53C94/Am53CF94 commands. */
enum {
// General Commands
CMD_NOP = 0x00, // no interrupt
CMD_CLEAR_FIFO = 0x01, // no interrupt
CMD_RESET_DEVICE = 0x02, // no interrupt
CMD_RESET_BUS = 0x03,
// Initiator commands
CMD_XFER = 0x10,
CMD_COMPLETE_STEPS = 0x11,
CMD_MSG_ACCEPTED = 0x12,
//CMD_TRANSFER_PAD_BYTES = 0x18,
CMD_SET_ATN = 0x1A, // no interrupt
//CMD_RESET_ATN = 0x1B, // no interrupt
// Target commands
//CMD_SEND_MESSAGE = 0x20,
//CMD_SEND_STATUS = 0x21,
//CMD_SEND_DATA = 0x22,
//CMD_DISCONNECT_STEPS = 0x23,
//CMD_TERMINATE_STEPS = 0x24,
//CMD_TARGET_COMMAND_COMPLETE_STEPS = 0x25,
//CMD_DISCONNECT = 0x27, // no interrupt
//CMD_RECEIVE_MESSAGE_STEPS = 0x28,
//CMD_RECEIVE_COMMAND = 0x29,
//CMD_RECEIVE_DATA = 0x2A,
//CMD_RECEIVE_COMMAND_STEPS = 0x2B,
CMD_DMA_STOP = 0x04, // no interrupt
CMD_ACCESS_FIFO_COMMAND = 0x05,
// Idle Commands
//CMD_RESELECT_STEPS = 0x40,
CMD_SELECT_NO_ATN = 0x41,
CMD_SELECT_WITH_ATN = 0x42,
//CMD_SELECT_WITH_ATN_AND_STOP = 0x43,
CMD_ENA_SEL_RESEL = 0x44, // no interrupt
//CMD_DISABLE_SEL_RESEL = 0x45,
//CMD_SELECT_WITH_ATN3_STEPS = 0x46,
//CMD_RESELECT_WITH_ATN3_STEPS = 0x47,
// Flags
CMD_OPCODE = 0x7F,
CMD_ISDMA = 0x80,
};
/** Status register bits. **/
enum {
//SCSI_CTRL_IO = 0x01, // Input/Output
//SCSI_CTRL_CD = 0x02, // Command/Data
//SCSI_CTRL_MSG = 0x04, // Message
//STAT_GCV = 0x08, // Group Code Valid
STAT_TC = 0x10, // Terminal count (NCR) / count to zero (AMD)
//STAT_PE = 0x20, // Parity Error
STAT_GE = 0x40, // Gross Error (NCR) / Illegal Operation Error (AMD)
STAT_INT = 0x80, // Interrupt
};
/** Interrupt status register bits. */
enum {
INTSTAT_SRST = 0x80, // bus reset
INTSTAT_ICMD = 0x40, // invalid command
INTSTAT_DIS = 0x20, // disconnected
INTSTAT_SR = 0x10, // service request
INTSTAT_SO = 0x08, // successful operation
INTSTAT_RESEL = 0x04, // reselected
INTSTAT_SELA = 0x02, // selected as a target with attention
INTSTAT_SEL = 0x01, // selected as a target without attention
};
enum {
CFG2_ENF = 0x40, // Am53CF94: enable features (ENF) bit
};
/** Sequencer states. */
namespace SeqState {
enum {
IDLE = 0,
BUS_FREE,
ARB_BEGIN,
ARB_END,
SEL_BEGIN,
SEL_END,
SEND_MSG,
SEND_CMD,
CMD_COMPLETE,
XFER_BEGIN,
XFER_END,
SEND_DATA,
RCV_DATA,
RCV_STATUS,
RCV_MESSAGE,
};
};
/** Sequence descriptor for sequencer commands. */
typedef struct {
int seq_id;
int next_step;
int step_num;
int status;
} SeqDesc;
typedef std::function<void(const uint8_t drq_state)> DrqCb;
class Sc53C94 : public ScsiDevice {
public:
Sc53C94(uint8_t chip_id=12, uint8_t my_id=7);
~Sc53C94() = default;
static std::unique_ptr<HWComponent> create() {
return std::unique_ptr<Sc53C94>(new Sc53C94());
}
// HWComponent methods
int device_postinit();
// 53C94 registers access
uint8_t read(uint8_t reg_offset);
void write(uint8_t reg_offset, uint8_t value);
uint16_t pseudo_dma_read();
void pseudo_dma_write(uint16_t data);
// real DMA control
void real_dma_xfer_out();
void real_dma_xfer_in();
void dma_start();
void dma_wait();
void dma_stop();
void set_dma_channel(DmaBidirChannel *dma_ch) {
this->dma_ch = dma_ch;
auto dbdma_ch = dynamic_cast<DMAChannel*>(dma_ch);
if (dbdma_ch) {
dbdma_ch->set_callbacks(
std::bind(&Sc53C94::dma_start, this),
std::bind(&Sc53C94::dma_stop, this)
);
}
};
void set_drq_callback(DrqCb cb) {
this->drq_cb = cb;
}
// ScsiDevice methods
void notify(ScsiMsg msg_type, int param);
bool prepare_data() { return false; };
bool get_more_data() { return false; };
bool has_data() { return this->data_fifo_pos != 0; };
int send_data(uint8_t* dst_ptr, int count);
void process_command() {};
protected:
void reset_device();
void update_command_reg(uint8_t cmd);
void exec_command();
void exec_next_command();
void fifo_push(const uint8_t data);
uint8_t fifo_pop();
void sequencer();
void seq_defer_state(uint64_t delay_ns);
bool rcv_data();
void update_irq();
private:
uint8_t chip_id = 0;
uint8_t my_bus_id = 0;
uint32_t my_timer_id = 0;
uint8_t cmd_fifo[2];
uint8_t data_fifo[16];
int cmd_fifo_pos = 0;
int data_fifo_pos = 0;
int bytes_out = 0;
bool on_reset = false;
uint32_t xfer_count = 0;
uint32_t set_xfer_count = 0;
uint8_t status = 0;
uint8_t target_id = 0;
uint8_t int_status = 0;
uint8_t seq_step = 0;
uint8_t sel_timeout = 0;
uint8_t sync_offset = 0;
uint8_t clk_factor = 0;
uint8_t config1 = 0;
uint8_t config2 = 0;
uint8_t config3 = 0;
// sequencer state
uint32_t seq_timer_id = 0;
uint32_t cur_state = 0;
uint32_t next_state = 0;
SeqDesc* cmd_steps = nullptr;
bool is_initiator = false;
uint8_t cur_cmd = 0;
bool is_dma_cmd = false;
int cur_bus_phase = 0;
// interrupt related stuff
InterruptCtrl* int_ctrl = nullptr;
uint32_t irq_id = 0;
uint8_t irq = 0;
// DMA related stuff
DmaBidirChannel* dma_ch = nullptr;
DrqCb drq_cb = nullptr;
uint32_t dma_timer_id = 0;
};
#endif // SC_53C94_H
Reference in New Issue View Git Blame Copy Permalink