mirror of
https://github.com/transistorfet/moa.git
synced 2024-11-18 14:05:57 +00:00
54 lines
2.6 KiB
Plaintext
54 lines
2.6 KiB
Plaintext
|
|
* movem still isn't working (for genesis)
|
|
* fix movem tests
|
|
|
|
* modify the frame swapper and frontend to avoid the extra buffer copy
|
|
* I had to remove the mask colour from blit because it doesn't work with the mac... need a new solution
|
|
|
|
* add more m68k tests and try to test against a working impl
|
|
* maybe see about a Mac 128k or something
|
|
|
|
* should you rename devices.rs traits.rs?
|
|
|
|
|
|
|
|
* how can you do devices that change their address map during operation, like mac which puts rom at 0 and ram at 600000 temporarily
|
|
* i need a better way of handling disperate reads/writes to I/O spaces, rather than having multiple devices or having a massive chunk of address space allocated, continuously
|
|
* should you modify Addressable to also take the absolute address as input? I'm thinking of how the same device could be mapped to multiple addresses in memory instead
|
|
of taking up a whole range of addresses
|
|
* could have a remapper device, which takes a big swath of addresses in and maps them to another set of addresses (for Mac VIA generic to bus-hookup-in-mac adapter)
|
|
* could you use a generic sharable signal thing for sharing data, such as the VIA in mac128 where a single output bit determines the video mode (which would be a separate device)
|
|
So both could share the same Signal, one setting it and the other reading it, but how would you actually configure/build that?
|
|
|
|
|
|
* you could modify read()/write() in Addressable to return the number of bytes read or written for dynamic bus sizing used by the MC68020+
|
|
* should you simulate bus arbitration?
|
|
|
|
|
|
Genesis/Mega Drive:
|
|
* fix ym7101 to better handle V/H interrupts (right now it sets and then the next step will clear, but it'd be nice if it could 'edge trigger')
|
|
* YM7101 timing is causing it to be very slow... speeding this up increasing rendering speed a lot, even though the frame shouldn't be drawn that often... not sure what's wrong with the timing
|
|
* make the ym7101 set/reset the v_int occurred flag based on the interrupt controller
|
|
|
|
|
|
68000:
|
|
* add instruction timing to M68k
|
|
* make tests for each instruction
|
|
* check all instructions in the docs
|
|
|
|
* unimplemented: ABCD, ADDX, BFFFO, BFINS, BKPT, CHK, ILLEGAL, MOVEfromCCR,, RTR, RTD, SBCD, SUBX
|
|
* >=MC68020 undecoded & unimplemented: CALLM, CAS, CAS2, CHK2, CMP2, RTM, PACK, TRAPcc, UNPK
|
|
|
|
* add support for MMU
|
|
* add support for FPU
|
|
* Coprocessor instructions: cpBcc, cpDBcc, cpGEN, cpScc, cpTRAPcc
|
|
|
|
Z80:
|
|
* add instruction timings to Z80
|
|
|
|
|
|
|
|
* how can you have multiple CPUs
|
|
* can you eventually make the system connections all configurable via a config file?
|
|
|