Apple2-IO-RPi/README.md

# Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O

![Image of Board](/Hardware/Apple2IORPi.jpg)

## Purpose
The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. This includes using the attached RPi Zero W for it's storage, network and processor to provide new functionality for the Apple II.

## Project Status
So far, this is a project and not a finished product. The current prototype is on the fourth revision and a few have been assembled and tested. It is now possible for the Apple II to boot from and write to a virutal hard drive image stored on the RPi in any slot and execute simple commands on the RPi via the Apple II. The code has no error handling or tests yet and is incomplete.

## Roadmap
1. Detect when RPi is in a ready state
2. Wifi setup tool
3. Proper ProDOS clock driver (currently just directly sets values on block reads)
4. Support for direct file read/write without drive image
5. Image conversion on download
6. Web service call support
7. Full terminal emulation
8. Remote code execution 
9. Proxy VNC connection, rendering as Apple II compatible graphics

## Setup
1. Have PCBs made from the gerber and drill files in the Hardware folder or email me for a blank or fully assembled board
2. Solder chips, header and capacitors in place
3. Attach Raspberry Pi Zero W facing outward from the card
4. Install Raspberry Pi OS on microSD card https://www.raspberrypi.org/software/
5. Configure wifi in boot/wpa_supplicant.conf https://howtoraspberrypi.com/how-to-raspberry-pi-headless-setup/
6. Add empty ssh file boot (for ssh access over wifi)
7. Put microSD card in the RPi
8. Install the expansion card into the Apple II
9. Power on the Apple II
10. Update firmware with utility (not written yet) or use EPROM programmer
11. sudo apt install git golang
12. git clone https://github.com/tjboldt/Apple2-IO-RPi.git
13. cd Apple2-IO-RPi/RaspberryPi/apple2driver
14. go get
15. go build
16. ./apple2driver ../Apple2-IO-RPi.hdv
18. Setup the Driver as a service or to autostart via cronjob (crontab -e then add the line @reboot /home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv > /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.log)

## Similar Project
If you prefer having Apple II peripherals control a Raspberry Pi rather than simply using the Raspberry Pi to provide storage, network access and processing to the Apple II, have a look at David Schmenk's excellent [Apple2Pi](https://github.com/dschmenk/apple2pi) project.
Initial commit 2020-11-03 02:02:52 +00:00			`# Apple2-IO-RPi`
			`Apple II expansion card using a Raspberry Pi for I/O`
Update initial readme 2020-11-03 02:46:28 +00:00
Update README.md 2020-11-17 00:25:02 +00:00			`![Image of Board](/Hardware/Apple2IORPi.jpg)`

Update schematic/PCB to work with more EPROM types 2020-12-14 03:19:04 +00:00			`## Purpose`
Update README.md 2021-03-29 12:47:21 +00:00			`The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. This includes using the attached RPi Zero W for it's storage, network and processor to provide new functionality for the Apple II.`
Update schematic/PCB to work with more EPROM types 2020-12-14 03:19:04 +00:00
Update initial readme 2020-11-03 02:46:28 +00:00			`## Project Status`
Update roadmap and project status 2021-03-29 12:18:58 +00:00			`So far, this is a project and not a finished product. The current prototype is on the fourth revision and a few have been assembled and tested. It is now possible for the Apple II to boot from and write to a virutal hard drive image stored on the RPi in any slot and execute simple commands on the RPi via the Apple II. The code has no error handling or tests yet and is incomplete.`
Update initial readme 2020-11-03 02:46:28 +00:00
Update schematic/PCB to work with more EPROM types 2020-12-14 03:19:04 +00:00			`## Roadmap`
Update README.md 2021-03-29 12:47:21 +00:00			`1. Detect when RPi is in a ready state`
Update roadmap 2021-05-11 04:26:42 +00:00			`2. Wifi setup tool`
			`3. Proper ProDOS clock driver (currently just directly sets values on block reads)`
			`4. Support for direct file read/write without drive image`
			`5. Image conversion on download`
			`6. Web service call support`
			`7. Full terminal emulation`
			`8. Remote code execution`
			`9. Proxy VNC connection, rendering as Apple II compatible graphics`
Update initial readme 2020-11-03 02:46:28 +00:00
Add non-functional server code for RPi 2020-12-04 00:28:10 +00:00			`## Setup`
Update roadmap and project status 2021-03-29 12:18:58 +00:00			`1. Have PCBs made from the gerber and drill files in the Hardware folder or email me for a blank or fully assembled board`
Add non-functional server code for RPi 2020-12-04 00:28:10 +00:00			`2. Solder chips, header and capacitors in place`
			`3. Attach Raspberry Pi Zero W facing outward from the card`
Update setup instructions 2021-03-28 21:00:08 +00:00			`4. Install Raspberry Pi OS on microSD card https://www.raspberrypi.org/software/`
			`5. Configure wifi in boot/wpa_supplicant.conf https://howtoraspberrypi.com/how-to-raspberry-pi-headless-setup/`
Add non-functional server code for RPi 2020-12-04 00:28:10 +00:00			`6. Add empty ssh file boot (for ssh access over wifi)`
			`7. Put microSD card in the RPi`
			`8. Install the expansion card into the Apple II`
			`9. Power on the Apple II`
Update README with latest status and roadmap 2021-03-24 01:27:03 +00:00			`10. Update firmware with utility (not written yet) or use EPROM programmer`
Update setup instructions 2021-03-28 21:00:08 +00:00			`11. sudo apt install git golang`
			`12. git clone https://github.com/tjboldt/Apple2-IO-RPi.git`
Refactor Go code into packages 2021-05-30 11:18:39 +00:00			`13. cd Apple2-IO-RPi/RaspberryPi/apple2driver`
Update setup instructions 2021-03-28 21:00:08 +00:00			`14. go get`
			`15. go build`
Refactor Go code into packages 2021-05-30 11:18:39 +00:00			`16. ./apple2driver ../Apple2-IO-RPi.hdv`
			`18. Setup the Driver as a service or to autostart via cronjob (crontab -e then add the line @reboot /home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv > /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.log)`
Add non-functional server code for RPi 2020-12-04 00:28:10 +00:00
Update initial readme 2020-11-03 02:46:28 +00:00			`## Similar Project`
Add bootable hard drive image 2021-03-28 21:16:31 +00:00			`If you prefer having Apple II peripherals control a Raspberry Pi rather than simply using the Raspberry Pi to provide storage, network access and processing to the Apple II, have a look at David Schmenk's excellent [Apple2Pi](https://github.com/dschmenk/apple2pi) project.`