Project to create an 3D-printed custom enclosure for the BMOW FloppyEmu - shaped like the historic Apple Disk II drive from 1978
Go to file
2022-05-15 20:33:24 +02:00
resources Added PCB schematics. 2022-05-15 20:31:33 +02:00
scad Initial version of the main SCAD file. 2022-05-15 20:24:12 +02:00
.gitignore
README.md Update README.md 2022-05-15 20:33:24 +02:00

FloppyEmuDiskIIEnclosure

Project to create an 3D-printed custom enclosure for the "Big Mess of Wires" FloppyEmu (a SD card disk drive emulator for the Apple II). The custom enclosure is shaped like Apple's historic "Disk II" drive, which Apple introduced in 1978.

Description

This project contains SCAD design files & STL files, stickers, KiCad PCB design, to create a 3D printed enclosure for a FloppyEmu. The enclosure is like the historic "Disk II" drive, which Apple introduced in 1978 for the Apple II.

Final1 Final2

Design

The 3D design is done with OpenSCAD. All files are available in the scad folder. SCAD provides You can also find a number of ready-to-use STL files in the stl folder.

3D-Design2 3D-Design4 3D-Design3

Button Panel

You will also need a button panel, so you can control FloppyEmu from the front panel. You can create the panel using a perfboard - or use the PCB design files to order a printed circuit board. You'll find schematics and also a KiCad PCB design project in the pcb folder.

ButtonPanel1 ButtonPanel2 ButtonPanel3 ButtonPanel4