Generating VGA video with an Arduino Uno / Atmega16u2 Microcontroller
Go to file
2017-01-22 12:56:19 +10:00
apple Contact updates 2017-01-22 12:56:19 +10:00
ascii Contact updates 2017-01-22 12:56:19 +10:00
fontgen First Commit 2015-04-08 17:12:07 +10:00
LICENSE Initial commit 2015-04-08 15:50:01 +10:00
README.md Cleaning up markdown formatting 2015-04-08 17:24:07 +10:00

arduino-vga

Generating VGA video with an Arduino Uno / Atmega16u2 Microcontroller.

To Connect (atmega16u2):

  • Connect all grounds on the VGA connector together.
  • Connect VGA ground to the Arduino Gnd.
  • Place a 120ohm resistor from the MOSI2 pin (Pin 4 on ICSP) to PB7 (Pin 4 on JP2)
  • Connect the VGA red, blue and green inputs together and connect to PB7.
  • Connect VGA vsync to PB5 (Pin 3 on JP2).
  • Connect VGA hsync to PB4 (Pin 1 on JP2).

To Assemble:

  • avr-as -mmcu=atmega16u2 -o ghettovga.o ghettovga.s
  • avr-ld -m avr35 -o ghettovga.bin ghettovga.o
  • avr-objcopy -j .text -j .data -O ihex ghettovga.bin vghettovga.hex

To Upload:

  • Temporarily short pins 5 and 6 on the atmega16u2 ICSP header.
  • dfu-programmer atmega16u2 erase
  • dfu-programmer atmega16u2 flash "./ghettovga.hex"
  • dfu-programmer atmega16u2 reset

To Restore Arduino Bootloader

  • Temporarily short pins 5 and 6 on the atmega16u2 ICSP header.
  • Retrieve the appropriate usb-serial hex from: http://bit.ly/1E3pMbU
  • Use dfu-programmer to flash hex to atmega16u2

Font glyphs copyright (c) 1981 Michael C. Koss http://mckoss.com/jscript/tinyalice.htm