1
0
mirror of https://github.com/fadden/6502bench.git synced 2024-12-10 21:49:27 +00:00
6502bench/CommonUtil/Version.cs

195 lines
6.8 KiB
C#
Raw Normal View History

2018-09-28 17:05:11 +00:00
/*
* Copyright 2018 faddenSoft
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
using System;
using System.Diagnostics;
namespace CommonUtil {
/// <summary>
/// Version number container. Instances are immutable.
/// </summary>
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 23:26:05 +00:00
/// <remarks>
/// See https://semver.org/ for explanation of system.
/// </remarks>
2018-09-28 17:05:11 +00:00
public struct Version {
// Must be in ascending order, e.g. Alpha release comes before Beta.
public enum PreRelType { Dev, Alpha, Beta, Final };
/// <summary>
/// Major version number.
/// </summary>
public int Major { get; private set; }
/// <summary>
/// Minor version number.
/// </summary>
public int Minor { get; private set; }
/// <summary>
/// Bug fix release number.
/// </summary>
public int Patch { get; private set; }
/// <summary>
/// Software grade, for pre-release versions.
/// </summary>
public PreRelType PreReleaseType { get; private set; }
/// <summary>
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 23:26:05 +00:00
/// Pre-release version. Always zero when PreReleaseType is Final.
2018-09-28 17:05:11 +00:00
/// </summary>
public int PreRelease { get; private set; }
/// <summary>
/// Version instance to use when no version information is available. This will
/// always compare as less than a "real" version.
/// </summary>
public static readonly Version NO_VERSION = new Version(-1, -1, -1);
/// <summary>
/// Shortcut for comparing vs. NO_VERSION.
/// </summary>
public bool IsValid {
get {
return this != NO_VERSION;
}
}
public Version(int major, int minor) :
this(major, minor, 0, PreRelType.Final, 0) { }
public Version(int major, int minor, int patch) :
this(major, minor, patch, PreRelType.Final, 0) { }
public Version(int major, int minor, int patch, PreRelType preRelType, int preRel) {
Debug.Assert(preRelType != PreRelType.Final || preRel == 0);
Major = major;
Minor = minor;
Patch = patch;
PreReleaseType = preRelType;
PreRelease = preRel;
}
/// <summary>
/// Attempts to parse the argument into version components.
/// </summary>
/// <param name="str">Version string.</param>
/// <returns>New Version object, or NO_VERSION on parsing failure.</returns>
public static Version Parse(string str) {
try {
int major, minor, patch;
major = minor = patch = 0;
string[] parts = str.Split(new char[] { '.', '-' });
major = int.Parse(parts[0]);
if (parts.Length > 1) {
minor = int.Parse(parts[1]);
}
if (parts.Length > 2) {
patch = int.Parse(parts[2]);
}
// parse the preRel thing someday
return new Version(major, minor, patch);
} catch (Exception ex) {
Debug.WriteLine("Version parse failed: '" + str + "': " + ex.Message);
return NO_VERSION;
}
}
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 23:26:05 +00:00
// this is a struct, so no need for null checks
2018-09-28 17:05:11 +00:00
public static bool operator ==(Version a, Version b) {
return a.Major == b.Major && a.Minor == b.Minor && a.Patch == b.Patch &&
a.PreReleaseType == b.PreReleaseType && a.PreRelease == b.PreRelease;
}
public static bool operator !=(Version a, Version b) {
return !(a == b);
}
public override bool Equals(object obj) {
return obj is Version && this == (Version)obj;
}
public override int GetHashCode() {
return Major * 10000 + Minor * 1000 + Patch * 100 +
(int)PreReleaseType * 10 + PreRelease;
}
public static bool operator <(Version a, Version b) {
if (a.Major != b.Major) {
return a.Major < b.Major;
}
if (a.Minor != b.Minor) {
return a.Minor < b.Minor;
}
if (a.Patch != b.Patch) {
return a.Patch < b.Patch;
}
if (a.PreReleaseType != b.PreReleaseType) {
return (int)a.PreReleaseType < (int)b.PreReleaseType;
}
if (a.PreRelease != b.PreRelease) {
return a.PreRelease < b.PreRelease;
}
Debug.Assert(a == b);
return false;
}
public static bool operator >(Version a, Version b) {
return b < a;
}
public static bool operator <=(Version a, Version b) {
return a == b || a < b;
}
public static bool operator >=(Version a, Version b) {
return a == b || a > b;
}
public override string ToString() {
if (this == NO_VERSION) {
return Properties.Resources.NO_VERSION;
} else if (PreReleaseType == PreRelType.Final) {
return string.Format("{0}.{1}.{2}", Major, Minor, Patch);
} else {
return string.Format("{0}.{1}.{2}-{3}{4}", Major, Minor, Patch,
PreReleaseType.ToString().ToLower(), PreRelease);
}
}
/// <summary>
/// Simple unit test.
/// </summary>
public static bool Test() {
bool ok = true;
Version checkVers = new Version(1, 2, 3, PreRelType.Beta, 4);
Version sameVers = new Version(1, 2, 3, PreRelType.Beta, 4);
ok &= (checkVers == sameVers);
ok &= (checkVers <= sameVers);
ok &= (checkVers >= sameVers);
ok &= (!(checkVers < sameVers));
ok &= (!(checkVers > sameVers));
ok &= (checkVers != new Version(1, 2, 3));
ok &= (checkVers < new Version(1, 2, 3));
ok &= (checkVers > new Version(1, 2, 3, PreRelType.Beta, 3));
ok &= (checkVers < new Version(2, 0));
ok &= (checkVers > new Version(1, 2, 2));
ok &= (checkVers < new Version(1, 3, 1));
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 23:26:05 +00:00
Debug.WriteLine("Version struct: test complete (ok=" + ok + ")");
2018-09-28 17:05:11 +00:00
return ok;
}
}
}