6502/6502bench
1
0
Fork 0
mirror of https://github.com/fadden/6502bench.git synced 2024-12-02 13:51:36 +00:00
Code Issues Projects Releases Wiki Activity
b58fdedfcd
6502bench/SourceGen/SGTestData/Expected/20130-char-encoding-p_64tass.S

341 lines
7.9 KiB
ArmAsm
Raw Normal View History

Rework 201XX-char-encoding-X tests We have a single character-encoding test that is cloned 3x so we can exercise the different values for the project's default character set. It was a 65816 test because it tested 16-bit immediate char operands, but that's a very small part of it. The 65816-specific portion is now 20122-char-encoding. The rest is now 201{2,3,4}0-char-encoding-X.
2020-10-19 22:01:02 +00:00
;Projected edited to format non-char operands as chars.
.cpu "6502"
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_hiascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.cdef $20,$7e,$a0
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.cdef $20,$7e,$20
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
* = $1000
lda #'A'
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
lda #'A' | $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
lda #'A'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
lda #'A'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
ldx #'a'
ldx #'a' | $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
ldx #'a'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
ldx #'a'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Rework 201XX-char-encoding-X tests We have a single character-encoding test that is cloned 3x so we can exercise the different values for the project's default character set. It was a 65816 test because it tested 16-bit immediate char operands, but that's a very small part of it. The 65816-specific portion is now 20122-char-encoding. The rest is now 201{2,3,4}0-char-encoding-X.
2020-10-19 22:01:02 +00:00
lda #$7f ;inappropriate format should be ignored
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
lda #$7f
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
lda #$7f
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
lda #$7f
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
lda #$0d
Rework 201XX-char-encoding-X tests We have a single character-encoding test that is cloned 3x so we can exercise the different values for the project's default character set. It was a 65816 test because it tested 16-bit immediate char operands, but that's a very small part of it. The 65816-specific portion is now 20122-char-encoding. The rest is now 201{2,3,4}0-char-encoding-X.
2020-10-19 22:01:02 +00:00
jmp L144B
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.byte 'C'
.byte 'C' | $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte 'C'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.byte 'C'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.word 'd'
.word 'd' | $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.word 'd'
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.word 'd'
.byte $00,$45
.byte $00,$c5
.byte $00,$c5
.byte $00,$45
.byte $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text "low ASCII str"
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_hiascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text "high ASCII str"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.text "PETSCII str"
.byte $80
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text "Screen Code str"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $82
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text $07,"Low ASCII CRLF",$0d,$0a
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $82
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_hiascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text $87,"High ASCII CRLF",$8d,$8a
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $82
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.text $93,"PETSCII with ",$96,"control",$05," codes",$0d
.byte $83
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_ascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text " !",$22,"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW"
.text "XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $83
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "sg_hiascii"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text " !",$a2,"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW"
.text "XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $83
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.text " !",$22,"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW"
.text "XYZ["
.byte $5c
.byte ']'
.byte $5e
.byte $5f
.byte $60
.text "abcdefghijklmnopqrstuvwxyz"
.byte $7b
.byte $7c
.byte $7d
.byte $7e
.byte $83
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text " !",$22,"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW"
.text "XYZ["
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $1c
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.byte ']'
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $1e
.byte $1f
.byte $40
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text "abcdefghijklmnopqrstuvwxyz"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $7b
.byte $7c
.byte $7d
.byte $7e
.byte $84
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.text "IICSTEP esrever"
.byte $84
.null "null term PETSCII"
.byte $84
.text "This null-terminated string is too long to fit on a single lin"
.text "e, and will be split.",$00
.byte $84
.ptext "PETSCII with length"
.byte $84
.text $14,$00,"PETSCII with length2"
.byte $84
PETSCII does DCI I didn't think it made sense, but I found something that used it, so apparently it's a thing. This updates the operand editor to let you choose PETSCII+DCI, and updates the assemblers to handle it correctly (really just 64tass, since the others either don't have a DCI directive or don't deal with PETSCII at all). Changed the char-encoding sample from "bad dcI" to "pet dcI", and updated the documentation.
2019-08-21 00:55:12 +00:00
.shift "pet dci"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $84
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "screen"
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text "edoC neercS esrever"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $84
Rework 201XX-char-encoding-X tests We have a single character-encoding test that is cloned 3x so we can exercise the different values for the project's default character set. It was a 65816 test because it tested 16-bit immediate char operands, but that's a very small part of it. The 65816-specific portion is now 20122-char-encoding. The rest is now 201{2,3,4}0-char-encoding-X.
2020-10-19 22:01:02 +00:00
.text "null-term screen code?@"
.byte $84
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.ptext "Screen Code with length"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $84
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.text $18,$00,"Screen Code with length2"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $84
Improve multi-encoding output in 64tass Previously, we used the default character encoding from the project properties to determine how strings and character constants in the entire source file should be encoded. Now we switch between encodings as needed. The default character encoding is no longer relevant. High ASCII is now an actual encoding, rather than acting like ASCII that sometimes doesn't work. Because we can do high ASCII character operands with "| $80", we don't output a .enc to switch from ASCII to high ASCII unless we need to generate a string. (If we're already in high ASCII mode, the "| $80" isn't required but won't hurt anything.) We now do a scan up front to see if ASCII or high ASCII is needed, and only output the .cdefs for the encodings that are actually used. The only gap in the matrix is high ASCII DCI strings -- the ".shift" pseudo-op rejects text if the string doesn't start with the high bit clear.
2019-08-21 20:30:25 +00:00
.shift "Screen Code DCI"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.byte $84
.byte $85
.byte $00
.byte $01
.byte $02
.byte $03
.byte $04
.byte $05
.byte $06
.byte $07
.byte $08
.byte $09
.byte $0a
.byte $0b
.byte $0c
.byte $0d
.byte $0e
.byte $0f
.byte $10
.byte $11
.byte $12
.byte $13
.byte $14
.byte $15
.byte $16
.byte $17
.byte $18
.byte $19
.byte $1a
.byte $1b
.byte $1c
.byte $1d
Operand for ".enc" should be in double quotes The 64tass assembler was generating a warning.
2020-07-02 15:14:42 +00:00
.enc "none"
Add 2016-char-encoding-a and variations All tests use the same data file and nearly the same project file. The only difference is the default text encoding property setting. For "-a" it's ASCII, for "-p" it's PETSCII, for "-s" it's C64 screen code. Right now this only affects the code generated for 64tass. The test itself is a collection of strings and characters in the supported character encodings. How these are handled varies significantly between assemblers.
2019-08-16 21:53:50 +00:00
.text $1e,$1f," !",$22,"#$%&'()*+,-./0123456789:;<=>?@abcdefghijklmno"
.text "pqrstuvwxyz["
.byte $5c
.byte $5d
.byte $5e
.byte $5f
.byte $60
.byte $61
.byte $62
.byte $63
.byte $64
.byte $65
.byte $66
.byte $67
.byte $68
.byte $69
.byte $6a
.byte $6b
.byte $6c
.byte $6d
.byte $6e
.byte $6f
.byte $70
.byte $71
.byte $72
.byte $73
.byte $74
.byte $75
.byte $76
.byte $77
.byte $78
.byte $79
.byte $7a
.byte $7b
.byte $7c
.byte $7d
.byte $7e
.byte $7f
.byte $80
.byte $81
.byte $82
.byte $83
.byte $84
.byte $85
.byte $86
.byte $87
.byte $88
.byte $89
.byte $8a
.byte $8b
.byte $8c
.byte $8d
.byte $8e
.byte $8f
.byte $90
.byte $91
.byte $92
.byte $93
.byte $94
.text $95,$96,$97,$98,$99,$9a,$9b,$9c
.byte $9d
.byte $9e
.byte $9f
.byte $a0
.byte $a1
.byte $a2
.byte $a3
.byte $a4
.byte $a5
.byte $a6
.byte $a7
.byte $a8
.byte $a9
.byte $aa
.byte $ab
.byte $ac
.byte $ad
.byte $ae
.byte $af
.byte $b0
.byte $b1
.byte $b2
.byte $b3
.byte $b4
.byte $b5
.byte $b6
.byte $b7
.byte $b8
.byte $b9
.byte $ba
.byte $bb
.byte $bc
.byte $bd
.byte $be
.byte $bf
.byte $c0
.text "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
.byte $db
.byte $dc
.byte $dd
.byte $de
.byte $df
.byte $e0
.byte $e1
.byte $e2
.byte $e3
.byte $e4
.byte $e5
.byte $e6
.byte $e7
.byte $e8
.byte $e9
.byte $ea
.byte $eb
.byte $ec
.byte $ed
.byte $ee
.byte $ef
.byte $f0
.byte $f1
.byte $f2
.byte $f3
.byte $f4
.byte $f5
.byte $f6
.byte $f7
.byte $f8
.byte $f9
.byte $fa
.byte $fb
.byte $fc
.byte $fd
.byte $fe
.byte $ff
Rework 201XX-char-encoding-X tests We have a single character-encoding test that is cloned 3x so we can exercise the different values for the project's default character set. It was a 65816 test because it tested 16-bit immediate char operands, but that's a very small part of it. The 65816-specific portion is now 20122-char-encoding. The rest is now 201{2,3,4}0-char-encoding-X.
2020-10-19 22:01:02 +00:00
Tweak backslash escaping The initial implementation was testing the byte value rather than the converted value, so backslashes were getting through in high ASCII strings. PETSCII and C64 screen codes don't really have a backslash so it's not really an issue there. The new implementation handles high ASCII correctly. The various 201n0-char-encoding-x regression tests have been updated to verify this.
2021-08-01 03:22:21 +00:00
L144B nop
jmp _L14DA
.enc "sg_ascii"
.text "ASCII escapes \: \\ \r \n \",$22," \' \t"
.byte $80
.enc "none"
.text "PETSCII escapes "
.byte $5c
.text ": "
.byte $5c
.byte $5c
.byte ' '
.byte $5c
.text "r "
.byte $5c
.text "n "
.byte $5c
.text $22," "
.byte $5c
.text "' "
.byte $5c
.byte 't'
.byte $80
.text "scr ",$05
.byte $13
.byte $03
.byte $01
.byte $10
.byte $05
.byte $13
.text " ",$1c,": ",$1c,$1c," ",$1c,$12," ",$1c
.byte $0e
.text " ",$1c,$22," ",$1c,"' ",$1c
.byte $14
.byte $80
.enc "sg_hiascii"
.text "HIGH escapes \: \\ \r \n \0 \' \t"
.byte $80
_L14DA nop
rts
Rework 201XX-char-encoding-X tests We have a single character-encoding test that is cloned 3x so we can exercise the different values for the project's default character set. It was a 65816 test because it tested 16-bit immediate char operands, but that's a very small part of it. The 65816-specific portion is now 20122-char-encoding. The rest is now 201{2,3,4}0-char-encoding-X.
2020-10-19 22:01:02 +00:00
Reference in New Issue Copy Permalink