High ASCII and other encodings will be noted in the operand field,
not the opcode, so we no longer need these.
This removes the six input fields from the Pseudo-Op tab of app
settings. Values were stored as a serialized class in settings,
which generally works correctly as far as forward/backward
compatibility goes, so no worries there.
This also adds four "delimiter pattern" fields to the Code View tab,
allowing the user to customize how encoded strings are marked up
for the code list. The values aren't actually used yet.
Also, fixed an issue where changes to text fields on the Pseudo-Op
tab weren't raising the dirty flag.
We've been treating ASCII strings and instruction/data operands as
ambiguous, resolving low vs. high when generating output for the
display or assembler. This change splits it into two separate
formats, simplifying output generation.
The UI will continue to treat low/high ASCII as as single thing,
selecting the format appropriately based on the data. There's no
reason to have two radio buttons that are never both enabled.
The data operand string functions need some additional work, but
that overlaps substantially with the upcoming PETSCII changes, so
for now all strings set by the data operand editor are low ASCII.
The file format has changed again, but since there hasn't been a
release since the previous change, I'm leaving the file format
at v2. Code has been added to resolve the ASCII mode when loading
a v1 project file.
This removes some complexity from the assembly code generators.
DCI is handled with the ".shift" pseudo-op. The .null, .ptext,
and .shift operators all work correctly with escaped characters,
so we no longer redo those.
This generalizes the string pseudo-operand formatter, moving it into
the Asm65 library. The assembly source generators have been updated
to use it. This makes the individual generators simpler, and by
virtue of avoiding "test runs" should make them slightly faster.
This also introduces byte-to-character converters, though we're
currently still only supporting low/high ASCII.
Regression test output is unchanged.
During a discussion with the cc65 developers, I became convinced that
generating "MVN $01,$02" is wrong, and "MVN #$01,#$02" is correct.
64tass, cc65, and Merlin 32 all accept this syntax; only ACME does
not. Operands without a leading '#' should be treated as 24-bit
values, and have the bank byte extracted.
This change updates the on-screen display and assembled output to
include the '#'. The ACME generator uses a Quirk to suppress the
hash mark. (It doesn't currently accept values larger than 8 bits,
so there's no ambiguity.)
We used to use type="String", with the sub-type indicating whether
the string was null-terminated, prefixed with a length, or whatever.
This didn't leave much room for specifying a character encoding,
which is orthogonal to the sub-type.
What we actually want is to have the type specify the string type,
and then have the sub-type determine the character encoding. These
sub-types can also be used with the Numeric type to specify the
encoding of character operands.
This change updates the enum definitions and the various bits of
code that use them, but does not add any code for working with
non-ASCII character encodings.
The project file version number was incremented to 2, since the new
FormatDescriptor serialization is mildly incompatible with the old.
(Won't explode, but it'll post a complaint and ignore the stuff
it doesn't recognize.)
While I was at it, I finished removing DciReverse. It's still part
of the 2005-string-types regression test, which currently fails
because the generated source doesn't match.
There's no easy way to make non-zero-bank 65816 code work, so I'm
punting and just generating a whole-file hex dump for those. This
renders tests 2007 and 2009 useless, so I'm hesitant to claim that
ACME support is fully functional.
WDM <arg> now works. MVN/MVP are still broken. Correct code is
generated for whichever version of the assembler is configured.
Regression tests updated for new version.
Also, fixed a UI bug where manual edits to the assembler path were
being ignored.
The 65816 definition makes it a two-byte instruction, like COP. On
the 6502 it acted like a two-byte instruction, but in practice very
few assemblers treat it that way. Very few humans, for that matter.
So it's now treated as a single byte instruction, with the following
byte encoded as a data value.
- Updated the tutorial to track changes to WPF, and to clarify
existing content.
- Fixed Ctrl+H Ctrl+C, which was getting masked by the Copy command
handler.
- Fixed initial selection of address in Set Address.
SourceGen creates "auto" labels when it finds a reference to an
address that doesn't have a label associated with it. The label for
address $1234 would be "L1234". This change allows the project to
specify alternative label naming conventions, annotating them with
information from the cross-reference data. For example, a subroutine
entry point (i.e. the target of a JSR) would be "S_1234". (The
underscore was added to avoid confusion when an annotation letter
is the same as a hex digit.)
Also, tweaked the way the preferred clipboard line format is stored
in the settings file (was an integer, now an enumeration string).
In the cross-reference table we now indicate whether the reference
source is doing a read, write, read-modify-write, branch, subroutine
call, is just referencing the address, or is part of the data.
This worked, sort of. The problem is that SourceGen will revert to
hex output in certain situations, such as a broken symbolic
reference. There happens to be one in the ZIPPY example, and it's
on a relative branch.
The goal with the segment stuff is to allow cc65 to treat the
source as relocatable code. In that context, a relative branch to
an absolute address doesn't make any sense, so the assembler reports
a range error.
We don't currently have a mechanism that guarantees no references
are broken (and no affordance for finding them), so we can't make
this mode the default yet.
Instead, we continue to use the generic config, but generate the
correct set of lines as comments.
(issue #39)
The system configuration you get with "-t none" works for smaller
files but fails for larger ones. This updates the generator to
produce a source file and linker script pair. (I kinda saw this
one coming -- it's why the gen/asm dialog has a combo box for the
file preview -- so it didn't require that much work.)
This currently generates a fixed script for a generic system with
64KiB of RAM, using .ORGs to set the addresses as before.
With this change, assembling a file with 65536 NOPs succeeds.
(issue #39)
If you double-click on the opcode of "JSR label", the code view
selection jumps to the label. This now works for partial operands,
e.g. "LDA #<label".
Some changes to the find-label-offset code affected the cc65 "is it
a forward reference to a direct-page label" logic. The regression
test now correctly identifies an instruction that refers to itself
as not being a forward reference.
The cc65 assembler runs in a single pass, which means forward
address references default to 16 bits. For zero-page references
we have to add an explicit width disambiguator. (This is an
unusual situation that only occurs if you have a zero-page .ORG
in the file after code that references it.)
With this change, 2014-label-dp passes, and no other regression
tests were affected.
(issue #40)
The 2014-label-dp test now passes. Prior regression tests are
unaffected.
Also, renamed an IGenerator interface to more accurately reflect
its role.
(issue #37)
To avoid confusing the assembler, expressions with a leading
parenthesis like "(foo & $ffff) + 1" are prefixed with a "0+". This
is not necessary if the operand begins with a '#'.
(issue #16)
We now insert parenthesis as needed. This can cause problems in
some situations, so we always prefix parenthetical expressions with
"0+", which looks goofy and is unnecessary for immediate operands.
But it does generate working source code.
Renamed the "simple" expression mode to "common", as it's not
particularly simple but is what you'd expect most assemblers to do.
(OTOH, life has been full of surprises.)
(issue #16)
Gave cc65 its own expression generator, as the precedence table seems
atypical if not unique. Configured 64tass to use the "simple"
expression mode.
Added some operations on a 32-bit constant to 2007-labels-and-symbols
to exercise the current worst-case expression (shift + AND + add).
Tweaked the Merlin expression generator to handle it.
(issue #16)
Correctly handle pre-existing underscores and avoidance of
"reserved" labels.
Also, add more underscores to 2012-label-localizer to exercise
the code.
(issue #16)
Most tests pass, but 2007-labels-and-symbols fails because the
expressions recognized by 64tass don't match up with either of the
other assemblers.
This is currently using a workaround for the local label syntax.
64tass uses '_' as the prefix, which is unfortunate since SourceGen
explicitly allowed underscores in labels. (So does 64tass for that
matter, but it treats labels specially when the '_' comes first.)
We will need to rename any non-local user labels that start with '_'.
(issue #16)
Changed the "quick config" buttons for the asm config and pseudo-op
tabs into a drop-list and "set" button. The default values for
each assembler are now defined in the Asm*.cs file, rather than in
the settings code.
Rather than have each assembler get its own app config string for
the cross-assembler executable, we now have a collection of per-
assembler config items, of which the executable path name is one
member. The Asm Config tab has an auto-generated pop-up to select
the assembler.
The per-assembler settings block is serialized with the rather
unpleasant JSON-in-JSON approach, but nobody should have to look
at it.
This also adds assembler-specific column widths to the settings
dialog, though they aren't actually used yet.
Each supported assembler has an IGenerator interface and an
IAssembler interface. They're still two separate classes, but now
both are implemented in the same source file. (They'll probably
stay separate classes, since the two have little interaction.)
I'm keeping the "Asm*" filename. Seems the more natural fit.
Also, changed AssemblerInfo to try to get all assembler-specific
stuff into a single table.
Every once in a while, SourceGen will become unresponsive when it
tries to show a MessageBox. In the debugger you can see the GC
running frantically, but the stack trace is just sitting on the
MessageBox show call. Apparently, if you don't specify a parent
window argument, the MessageBox will occasionally end up behind
everything else, and you can get stuck.
I'm not sure what the GC frenzy is about, or whether this will fix
what I'm seeing, but it's easy to do and might solve the problem.
cf. https://stackoverflow.com/q/3467403/294248
These *almost* match what cc65 has, and are accepted as primary or
aliases by 64tass.
This combines the LAX and LXA operations. LXA is the immediate
form of LAX, and behaves somewhat differently (and is unstable).
I was treating them as two separate operations with independent
mnemonics, but that doesn't seem to be the preferred way to
handle it.
The cc65 generator wasn't generating LAX before; now it does. This
required nudging the width disambiguator, as LAX is a second
example of an instruction with both DP,Y and ABS,Y operands.
(issue #20)
We were generating code for > 2.17, with various bug fixes, but
since that's not shipping yet it won't be usable by anybody who
doesn't have a tip-of-tree cc65 installation.
