1
0
mirror of https://github.com/fadden/6502bench.git synced 2024-12-11 13:50:13 +00:00
Commit Graph

51 Commits

Author SHA1 Message Date
Andy McFadden
a1130ddc2b Fix the "target assembler" comment
The code generator outputs an optional comment specifying which
version of which assembler the code was generated for.  This was
handled inconsistently and, for the most part, incorrectly.  We now
report the correct version.
2021-07-31 14:56:17 -07:00
Andy McFadden
8c053c29f2 Update ACME generator for v0.97
Two things changed: (1) string literals can now hold backslash
escapes like "\n"; (2) MVN/MVP operands can now be prefixed with '#'.
The former was a breaking change because any string with "\" must
be changed to "\\".  This is now handled by the string operand
formatter.

Also, improved test harness output.  Show the assembler versions at
the end, and include assembler failure messages in the collected
output.
2021-07-31 14:42:36 -07:00
Andy McFadden
99cd0d3ac1 Improve handling of C64 PRG header
C64 PRG files are pretty common.  Their salient feature is that they
start with a 16-bit value that is used as the load address.  The
value is commonly generated by the assembler itself, rather than
explicitly added to the source file.

Not all assemblers know what a PRG file is, and some of them handle
it in ways that are difficult to guarantee in SourceGen.  ACME adds
the 16-bit header when the output file name ends in ".prg", cc65
uses a modified config file, 64tass uses a different command-line
option, and Merlin 32 has no idea what they are.

This change adds PRG file detection and handling to the 64tass code
generator.  Doing so required making a few changes to the gen/asm
interfaces, because we now need to have the generator pass additional
flags to the assembler, and sometimes we need code generation to
start somewhere other than offset zero.  Overall the changes were
pretty minor.

The 20042-address-changes test needed a 6502-only variant.  A new test
(20040-address-changes) has been added and given a PRG header.  As
part of this change the 65816 variant was changed to use addresses
in bank 2, which uncovered a code generation bug that this change
also fixes.

The 64tass --long-address flag doesn't appear to be necessary for
files <= 65536 bytes long, so we no longer emit it for those.

(issue #90)
2020-10-17 16:45:13 -07:00
Andy McFadden
34ba47e71d Add W65C02S support, part 3
Modified the asm source generators and on-screen display to show the
DP arg for BBR/BBS as hex.  The instructions are otherwise treated
as relative branches, e.g. the DP arg doesn't get factored into the
cross-reference table.

ACME/cc65 put the bit number in the mnemonic, 64tass wants it to be
in the first argument, and Merlin32 wants nothing to do with any of
this because it's incompatible with the 65816.

Added an "all ops" test for W65C02.
2020-10-11 14:35:17 -07:00
Andy McFadden
cb6ceafd73 Make operand wrap length configurable
Long operands, such as strings and bulk data, can span multiple lines.
SourceGen wraps them at 64 characters, which is fine for assembly
output but occasionally annoying on screen: if the operand column is
wide enough to show the entire value, the comment column is pushed
pretty far to the right.

This change makes the width configurable, as 32/48/64 characters,
with a pop-up in app settings.

The assemblers are all wired to 64 characters, though we could make
this configurable as well with an assembler-specific setting.

Some things have moved around a bit in app settings.  The Asm Config
tab now comes last.  Having it sandwiched in the middle of tabs that
altered the on-screen display didn't make much sense.  The Display
Format is now explicitly for opcodes and operands, and is split into
two columns.  The left column is managed by the "quick set" feature,
the right column is independent.
2020-07-19 18:39:27 -07:00
Andy McFadden
ee58d9e803 Data Bank Register management, part 3
Added a "fake" assembler pseudo-op for DBR changes.  Display entries
in line list.

Added entry to double-click handler so that you can double-click on
a PLB instruction operand to open the data bank editor.
2020-07-09 16:52:23 -07:00
Andy McFadden
3820bfee8b Set initial focus to appropriate field for project properties
If you double-click a project symbol declaration, the symbol editor
opens.  I found that I was double-clicking on the comment field and
typing with the expectation that the comment would be updated, but
it was actually setting the initial focus to the label field.

With this change the symbol editor will focus the label, value, or
comment field based on which column was double-clicked.

The behavior for Actions > Edit Project Symbol and other paths to the
symbol editor are unchanged.

Also, disabled a wayward assert.
2020-04-23 11:01:07 -07:00
Andy McFadden
071adb8e95 Two changes to "dense hex" bulk data formatting
(1) Added an option to limit the number of bytes per line.  This is
handy for things like bitmaps, where you might want to put (say) 3
or 8 bytes per line to reflect the structure.

(2) Added an application setting that determines whether the screen
listing shows Merlin/ACME dense hex (20edfd) or 64tass/cc65 hex bytes
($20,$ed,$fd).  Made the setting part of the assembler-driven display
definitions.  Updated 64tass+cc65 to use ".byte" as their dense hex
pseudo-op, and to use the updated formatter code.  No changes to
regression test output.

(Changes were requested in issue #42.)

Also, added a resize gripper to the bottom-right corner of the main
window.  (These seem to have generally fallen out of favor, but I
like having it there.)
2019-12-10 17:41:00 -08:00
Andy McFadden
88c56616f7 Label rework, part 5
Implemented assembly source generation of non-unique local labels.
The new 2023-non-unique-labels test exercises various edge cases
(though we're still missing local variable interaction).

The format of uniquified labels changed slightly, so the expected
output of 2012-label-localizer needed to be updated.

This changes the "no opcode mnemonics" and "mask leading underscores"
functions into integrated parts of the label localization process.
2019-11-17 16:05:51 -08:00
Andy McFadden
4e08810278 Finish removal of "disable label localizer" feature
The label localizer is now always on.  The regression tests turned
it off by default, but that's no longer allowed, so the generated
output has changed for many of them.  The tests themselves were not
altered.
2019-11-16 17:15:03 -08:00
Andy McFadden
be65f280a3 Minor tweaks
- Renamed "strip label prefix/suffix" to "omit label prefix/suffix".

- Changed a Merlin operand workaround so it doesn't apply to code
  that is explicitly not in bank zero.

- Changed {addr}/{const} annotations on project/platform symbol
  equates so they line up a little better on screen and in exported
  sources.
2019-11-15 16:24:07 -08:00
Andy McFadden
5dd7576529 Label rework, part 2
Continue development of non-unique labels.  The actual labels are
still unique, because we append a uniquifier tag, which gets added
and removed behind the scenes.  We're currently using the six-digit
hex file offset because this is only used for internal address
symbols.

The label editor and most of the formatters have been updated.  We
can't yet assemble code that includes non-unique labels, but older
stuff hasn't been broken.

This removes the "disable label localization" property, since that's
fundamentally incompatible with what we're doing, and adds a non-
unique label prefix setting so you can put '@' or ':' in front of
your should-be-local labels.

Also, fixed a field name typo.
2019-11-12 17:44:51 -08:00
Andy McFadden
4d079c8d14 Label rework, part 1
This adds the concept of label annotations.  The primary driver of
the feature is the desire to note that sometimes you know what a
thing is, but sometimes you're just taking an educated guess.
Instead of writing "high_score_maybe", you can now write "high_score?",
which is more compact and consistent.  The annotations are stripped
off when generating source code, making them similar to Notes.

I also created a "Generated" annotation for the labels that are
synthesized by the address table formatter, but don't modify the
label for them, because there's not much need to remind the user
that "T1234" was generated by algorithm.

This also lays some of the groundwork for non-unique labels.
2019-11-08 21:02:15 -08:00
Andy McFadden
b6e571afc2 Correctly handle embedded instruction edge case
This began with a change to support "BRK <operand>" in cc65.  The
assembler only supports this for 65816 projects, so we detect that
and enable it when available.

While fiddling with some test code an assertion fired.  This
revealed a minor issue in the code analyzer: when overwriting inline
data with instructions, we weren't resetting the format descriptor.

The code that exercises it, which requires two-byte BRKs and an
inline BRK handler in an extension script, has been added to test
2022-extension-scripts.

The new regression test revealed a flaw in the 64tass code
generator's character encoding scanner that caused it to hang.
Fixed.
2019-10-19 17:28:45 -07:00
Andy McFadden
cd23580cc5 Add junk/align directives
Sometimes there's a bunch of junk in the binary that isn't used for
anything.  Often it's there to make things line up at the start of
a page boundary.

This adds a ".junk" directive that tells the disassembler that it
can safely disregard the contents of a region.  If the region ends
on a power-of-two boundary, an alignment value can be specified.

The assembly source generators will output an alignment directive
when possible, a .fill directive when appropriate, and a .dense
directive when all else fails.  Because we're required to regenerate
the original data file, it's not always possible to avoid generating
a hex dump.
2019-10-18 21:00:28 -07:00
Andy McFadden
dfd5bcab1b Optionally treat BRKs as two-byte instructions
Early data sheets listed BRK as one byte, but RTI after a BRK skips
the following byte, effectively making BRK a 2-byte instruction.
Sometimes, such as when diassembling Apple /// SOS code, it's handy
to treat it that way explicitly.

This change makes two-byte BRKs optional, controlled by a checkbox
in the project settings.  In the system definitions it defaults to
true for Apple ///, false for all others.

ACME doesn't allow BRK to have an arg, and cc65 only allows it for
65816 code (?), so it's emitted as a hex blob for those assemblers.
Anyone wishing to target those assemblers should stick to 1-byte mode.

Extension scripts have to switch between formatting one byte of
inline data and formatting an instruction with a one-byte operand.
A helper function has been added to the plugin Util class.

To get some regression test coverage, 2022-extension-scripts has
been configured to use two-byte BRK.

Also, added/corrected some SOS constants.

See also issue #44.
2019-10-09 14:55:56 -07:00
Andy McFadden
824add17e8 Remap labels that use opcode mnemonics
In a recent survey, three out of four cross assemblers surveyed
recommended not using opcode mnemonics to their patients who use
labels.  We now remap labels like "AND" and "jmp", using the label
map that's part of the label localizer.

We skip the step for Merlin 32, which is perfectly happy to assemble
"JMP JMP JMP".

Also, fixed a bug in MaskLeadingUnderscores that could hang the
source generator thread.
2019-09-20 15:29:34 -07:00
Andy McFadden
b74630dd5b Work around two assembler issues
Most assemblers end local label scope when a global label is
encountered.  cc65 takes this one step further by ending local label
scope when constants or variables are defined.  So, if we have a
variable table with a nonzero number of entries, we want to create
a fake global label at that point to end the scope.

Merlin 32 won't let you write " LDA #',' ".  For some reason the
comma causes an error.  IGenerator now has a "tweak operand format"
interface that lets us fix that.
2019-09-20 14:05:17 -07:00
Andy McFadden
3353819a62 Change the way the "add padded string" functions work
The functions started by trying to pad a column out to a width,
then changed to pad things to a certain length.  What they really
should be doing is padding the start of an entry to a specified
column.  This is much more natural and avoids a trim operation.

The only change to the output is to ORG statements from the HTML
exporter, which are now formatted correctly.
2019-09-17 22:02:05 -07:00
Andy McFadden
14b215b76d Implement local variables for cc65
I'd apparently overlooked the ".set" directive, which seems to do
exactly what we need.
2019-09-01 18:14:39 -07:00
Andy McFadden
d542a809f8 Implement local variables for ACME
Unlike 64tass and Merlin, which allow you to redefine symbols, ACME
uses "zones" that provide scope for local variables.  This means
that, at the point of a local variable table definition, we have to
start a new zone and output the full set of active symbols, not just
the newly-defined ones.  (If you set the "clear previous" flag in
the LvTable there's no difference.)

We could do a bit better by only outputting the symbols that are
actually used within the zone, similar to what we do for global
project/platform symbols, but that's a bunch of work for questionable
benefit.
2019-09-01 10:55:19 -07:00
Andy McFadden
e82339573f Add VarDirective to PseudoOpNames
Also, rearranged the pseudo-op app settings XAML to be a bit easier
to maintain.
2019-08-29 12:14:47 -07:00
Andy McFadden
32d1147eec Improve multi-encoding output in 64tass
Previously, we used the default character encoding from the project
properties to determine how strings and character constants in the
entire source file should be encoded.  Now we switch between
encodings as needed.  The default character encoding is no longer
relevant.

High ASCII is now an actual encoding, rather than acting like ASCII
that sometimes doesn't work.  Because we can do high ASCII character
operands with "| $80", we don't output a .enc to switch from ASCII
to high ASCII unless we need to generate a string.  (If we're
already in high ASCII mode, the "| $80" isn't required but won't
hurt anything.)

We now do a scan up front to see if ASCII or high ASCII is needed,
and only output the .cdefs for the encodings that are actually used.

The only gap in the matrix is high ASCII DCI strings -- the ".shift"
pseudo-op rejects text if the string doesn't start with the high
bit clear.
2019-08-21 13:46:05 -07:00
Andy McFadden
4902b89cf8 Various improvements
The PseudoOpNames class is increasingly being used in situations
where mutability is undesirable.  This change makes instances
immutable, eliminating the Copy() method and adding a constructor
that takes a Dictionary.  The serialization code now operates on a
Dictionary instead of the class properties, but the JSON encoding is
identical, so this doesn't invalidate app settings file data.

Added an equality test to PseudoOpNames.  In LineListGen, don't
reset the line list if the names haven't actually changed.

Use a table lookup for C64 character conversions.  I figure that
should be faster than multiple conditionals on a modern x64 system.

Fixed a 64tass generator issue where we tried to query project
properties in a call that might not have a project available
(specifically, getting FormatConfig values out of the generator for
use in the "quick set" buttons for Display Format).

Fixed a regression test harness issue where, if the assembler reported
success but didn't actually generate output, an exception would be
thrown that halted the tests.

Increased the width of text entry fields on the Pseudo-Op tab of app
settings.  The previous 8-character limit wasn't wide enough to hold
ACME's "!pseudopc".  Also, use TrimEnd() to remove trailing spaces
(leading spaces are still allowed).

In the last couple of months, Win10 started stalling for a fraction
of a second when executing assemblers.  It doesn't do this every
time; mostly it happens if it has been a while since the assembler
was run.  My guess is this has to do with changes to the built-in
malware scanner.  Whatever the case, we now change the mouse pointer
to a wait cursor while updating the assembler version cache.
2019-08-17 11:30:42 -07:00
Andy McFadden
84d3146903 Update source generators to recognize C64 strings
For the most part this means explicitly dumping them as hex, though
ACME gets to exercise its !pet and !scr operators.
2019-08-15 21:33:10 -07:00
Andy McFadden
beb1024550 Define and use "delimiter sets"
A delimiter definition is four strings (prefix, open, close, suffix)
that are concatenated with the character or string data to form an
operand.  A delimiter set is a collection of delimiter definitions,
with separate entries for each character encoding.

This is a convenient way to configure Formatter objects, import and
export data from the app settings file, and manage the UI needed to
allow the user to customize how things look.

The full set of options didn't fit on the first app settings tab, so
there's now a separate tab just for specifying character and string
delimiters.  (This might be overkill, but there are various plausible
scenarios that make use of it.)

The delimiters for on-screen display of strings can now be
configured.
2019-08-14 16:10:04 -07:00
Andy McFadden
5889f45737 Replace on-screen string operand formatting
The previous functions just grabbed 62 characters and slapped quotes
on the ends, but that doesn't work if we want to show strings with
embedded control characters.  This change replaces the simple
formatter with the one used to generate assembly source code.  This
increases the cost of refreshing the display list, so a cache will
need to be added in a future change.

Converters for C64 PETSCII and C64 Screen Code have been defined.
The results of changing the auto-scan encoding can now be viewed.

The string operand formatter was using a single delimiter, but for
the on-screen version we want open-quote and close-quote, and might
want to identify some encodings with a prefix.  The formatter now
takes a class that defines the various parts.  (It might be worth
replacing the delimiter patterns recently added for single-character
operands with this, so we don't have two mechanisms for very nearly
the same thing.)

While working on this change I remembered why there were two kinds
of "reverse" in the old Merlin 32 string operand generator: what you
want for assembly code is different from what you want on screen.
The ReverseMode enum has been resurrected.
2019-08-13 17:52:58 -07:00
Andy McFadden
f33cd7d8a6 Replace character operand output method
The previous code output a character in single-quotes if it was
standard ASCII, double-quotes if high ASCII, or hex if it was neither
of those.  If a flag was set, high ASCII would also be output as
hex.

The new system takes the character value and an encoding identifier.
The identifier selects the character converter and delimiter
pattern, and puts the two together to generate the operand.

While doing this I realized that I could trivially support high
ASCII character arguments in all assemblers by setting the delimiter
pattern to "'#' | $80".

In FormatDescriptor, I had previously renamed the "Ascii" sub-type
"LowAscii" so it wouldn't be confused, but I dislike filling the
project file with "LowAscii" when "Ascii" is more accurate and less
confusing.  So I switched it back, and we now check the project
file version number when deciding what to do with an ASCII item.
The CharEncoding tests/converters were also renamed.

Moved the default delimiter patterns to the string table.

Widened the delimiter pattern input fields slightly.  Added a read-
only TextBox with assorted non-typewriter quotes and things so
people have something to copy text from.
2019-08-11 22:11:00 -07:00
Andy McFadden
975b62db6b Treat low and high ASCII as two distinct formats
We've been treating ASCII strings and instruction/data operands as
ambiguous, resolving low vs. high when generating output for the
display or assembler.  This change splits it into two separate
formats, simplifying output generation.

The UI will continue to treat low/high ASCII as as single thing,
selecting the format appropriately based on the data.  There's no
reason to have two radio buttons that are never both enabled.

The data operand string functions need some additional work, but
that overlaps substantially with the upcoming PETSCII changes, so
for now all strings set by the data operand editor are low ASCII.

The file format has changed again, but since there hasn't been a
release since the previous change, I'm leaving the file format
at v2.  Code has been added to resolve the ASCII mode when loading
a v1 project file.

This removes some complexity from the assembly code generators.
2019-08-10 14:59:24 -07:00
Andy McFadden
dae76d9b45 Rework string operand formatting
This generalizes the string pseudo-operand formatter, moving it into
the Asm65 library.  The assembly source generators have been updated
to use it.  This makes the individual generators simpler, and by
virtue of avoiding "test runs" should make them slightly faster.

This also introduces byte-to-character converters, though we're
currently still only supporting low/high ASCII.

Regression test output is unchanged.
2019-08-09 17:46:33 -07:00
Andy McFadden
835c1c7fe2 Reverse position on '#' in block move operands
During a discussion with the cc65 developers, I became convinced that
generating "MVN $01,$02" is wrong, and "MVN #$01,#$02" is correct.
64tass, cc65, and Merlin 32 all accept this syntax; only ACME does
not.  Operands without a leading '#' should be treated as 24-bit
values, and have the bank byte extracted.

This change updates the on-screen display and assembled output to
include the '#'.  The ACME generator uses a Quirk to suppress the
hash mark.  (It doesn't currently accept values larger than 8 bits,
so there's no ambiguity.)
2019-08-08 13:02:01 -07:00
Andy McFadden
0d0854bda7 Change the way string formats are defined
We used to use type="String", with the sub-type indicating whether
the string was null-terminated, prefixed with a length, or whatever.
This didn't leave much room for specifying a character encoding,
which is orthogonal to the sub-type.

What we actually want is to have the type specify the string type,
and then have the sub-type determine the character encoding.  These
sub-types can also be used with the Numeric type to specify the
encoding of character operands.

This change updates the enum definitions and the various bits of
code that use them, but does not add any code for working with
non-ASCII character encodings.

The project file version number was incremented to 2, since the new
FormatDescriptor serialization is mildly incompatible with the old.
(Won't explode, but it'll post a complaint and ignore the stuff
it doesn't recognize.)

While I was at it, I finished removing DciReverse.  It's still part
of the 2005-string-types regression test, which currently fails
because the generated source doesn't match.
2019-08-07 16:19:13 -07:00
Andy McFadden
71badf2359 Update for cc65 v2.18
WDM <arg> now works.  MVN/MVP are still broken.  Correct code is
generated for whichever version of the assembler is configured.
Regression tests updated for new version.

Also, fixed a UI bug where manual edits to the assembler path were
being ignored.
2019-08-04 13:38:25 -07:00
Andy McFadden
1ad9caa783 First pass at ACME support
I managed to work around most of the quirks, but there's still an
issue with 65816 code.

Also, enabled word wrapping in the AsmGen text boxes.
2019-08-03 20:54:07 -07:00
Andy McFadden
98914e9f80 Treat BRK as a 1-byte instruction
The 65816 definition makes it a two-byte instruction, like COP.  On
the 6502 it acted like a two-byte instruction, but in practice very
few assemblers treat it that way.  Very few humans, for that matter.
So it's now treated as a single byte instruction, with the following
byte encoded as a data value.
2019-08-02 17:21:50 -07:00
Andy McFadden
c64f72d147 Move WPF code from SourceGenWPF to SourceGen 2019-07-20 13:28:37 -07:00
Andy McFadden
e3906e021b Move WinForms code to SourceGenWF 2019-07-20 13:02:54 -07:00
Andy McFadden
2065f4ef9e Attempt to generate segment names for cc65
This worked, sort of.  The problem is that SourceGen will revert to
hex output in certain situations, such as a broken symbolic
reference.  There happens to be one in the ZIPPY example, and it's
on a relative branch.

The goal with the segment stuff is to allow cc65 to treat the
source as relocatable code.  In that context, a relative branch to
an absolute address doesn't make any sense, so the assembler reports
a range error.

We don't currently have a mechanism that guarantees no references
are broken (and no affordance for finding them), so we can't make
this mode the default yet.

Instead, we continue to use the generic config, but generate the
correct set of lines as comments.

(issue #39)
2018-11-18 15:11:29 -08:00
Andy McFadden
17f0faa845 Add linker config scripts to cc65 generator output
The system configuration you get with "-t none" works for smaller
files but fails for larger ones.  This updates the generator to
produce a source file and linker script pair.  (I kinda saw this
one coming -- it's why the gen/asm dialog has a combo box for the
file preview -- so it didn't require that much work.)

This currently generates a fixed script for a generic system with
64KiB of RAM, using .ORGs to set the addresses as before.

With this change, assembling a file with 65536 NOPs succeeds.

(issue #39)
2018-11-18 14:28:44 -08:00
Andy McFadden
5b1dde290a Show assembler options in header comment 2018-11-03 14:02:52 -07:00
Andy McFadden
a88c746419 Work around cc65 single-pass behavior
The cc65 assembler runs in a single pass, which means forward
address references default to 16 bits.  For zero-page references
we have to add an explicit width disambiguator.  (This is an
unusual situation that only occurs if you have a zero-page .ORG
in the file after code that references it.)

With this change, 2014-label-dp passes, and no other regression
tests were affected.

(issue #40)
2018-11-02 15:32:54 -07:00
Andy McFadden
c80be07f73 Work around Merlin 32 instruction parsing bug
The 2014-label-dp test now passes.  Prior regression tests are
unaffected.

Also, renamed an IGenerator interface to more accurately reflect
its role.

(issue #37)
2018-11-02 13:49:27 -07:00
Andy McFadden
7aa3e4dbcd Show "assembling" when assembling
Merlin 32 is slow enough with a 64K data file that you have
enough time to read the text.
2018-10-30 16:41:56 -07:00
Andy McFadden
a8af7e8794 Improve the "common" expression formatter
To avoid confusing the assembler, expressions with a leading
parenthesis like "(foo & $ffff) + 1" are prefixed with a "0+".  This
is not necessary if the operand begins with a '#'.

(issue #16)
2018-10-26 15:45:39 -07:00
Andy McFadden
61914c8f79 Progress toward 64tass expression support
Gave cc65 its own expression generator, as the precedence table seems
atypical if not unique.  Configured 64tass to use the "simple"
expression mode.

Added some operations on a 32-bit constant to 2007-labels-and-symbols
to exercise the current worst-case expression (shift + AND + add).
Tweaked the Merlin expression generator to handle it.

(issue #16)
2018-10-24 13:17:03 -07:00
Andy McFadden
f7e5cf2f45 Progress toward 64tass support
Most tests pass, but 2007-labels-and-symbols fails because the
expressions recognized by 64tass don't match up with either of the
other assemblers.

This is currently using a workaround for the local label syntax.
64tass uses '_' as the prefix, which is unfortunate since SourceGen
explicitly allowed underscores in labels.  (So does 64tass for that
matter, but it treats labels specially when the '_' comes first.)
We will need to rename any non-local user labels that start with '_'.

(issue #16)
2018-10-23 20:08:01 -07:00
Andy McFadden
ab9287fef8 Progress toward new assembler configuration
Changed the "quick config" buttons for the asm config and pseudo-op
tabs into a drop-list and "set" button.  The default values for
each assembler are now defined in the Asm*.cs file, rather than in
the settings code.
2018-10-21 16:36:48 -07:00
Andy McFadden
9aabd988a8 Progress toward new assembler configuration
Use configured column widths when generating output.

The regression test always uses the assembler-preferred default
widths.
2018-10-20 21:24:28 -07:00
Andy McFadden
4f9af30455 Progress toward new assembler configuration
Rather than have each assembler get its own app config string for
the cross-assembler executable, we now have a collection of per-
assembler config items, of which the executable path name is one
member.  The Asm Config tab has an auto-generated pop-up to select
the assembler.

The per-assembler settings block is serialized with the rather
unpleasant JSON-in-JSON approach, but nobody should have to look
at it.

This also adds assembler-specific column widths to the settings
dialog, though they aren't actually used yet.
2018-10-20 20:35:32 -07:00
Andy McFadden
f81c534d25 Merge Gen* and Asm* source files
Each supported assembler has an IGenerator interface and an
IAssembler interface.  They're still two separate classes, but now
both are implemented in the same source file.  (They'll probably
stay separate classes, since the two have little interaction.)

I'm keeping the "Asm*" filename.  Seems the more natural fit.

Also, changed AssemblerInfo to try to get all assembler-specific
stuff into a single table.
2018-10-17 13:50:28 -07:00