6502bench SourceGen: Code Generation & Assembly

Back to index

SourceGen can generate an assembly source file that, when fed into the target assembler, will recreate the original data file exactly. Every assembler is different, so support must be added to SourceGen for each.

The generation / assembly dialog can be opened with File > Assemble.

Supported Assemblers

SourceGen currently supports the following cross-assemblers:

• 64tass v1.53.1515 or later
• cc65 v2.17 or later
• Merlin 32 v1.0.0 or later

Version-Specific Code Generation

Code generation must be tailored to the specific version of the assembler. This is most easily understood with an example.

If you write MVN $01,$02, the assembler is expected to output 54 02 01, with the arguments reversed. cc65 v2.17 doesn't do that; this is a bug that was fixed in a later version. So if you're generating code for v2.17, you want to create source code with the arguments the wrong way around.

Having version-dependent source code is a bad idea, so SourceGen just outputs raw hex bytes for MVN/MVP instructions. This yields the correct code for all versions of the assembler, but is ugly and annoying. So we want to output actual MVN/MVP instructions when producing code for newer versions of the assembler.

When you configure a cross-assembler, SourceGen executes it and extracts the version information from the command-line output stream. This is used by the generator to ensure that the output will compile. If no assembler is configured, SourceGen will produce code optimized for the latest version of the assembler.

Generating Source Code

Cross assemblers tend to generate additional files, either compiler intermediaries ("file.o") or metadata ("_FileInformation.txt"). Some generators may produce multiple source files, perhaps a link script or symbol definition header to go with the assembly source. To avoid spreading files across the filesystem, SourceGen does all of its work in the same directory where the project lives. Before you can generate code, you have to have given your project a name by saving it.

The Generate and Assemble dialog has a drop-down list near the top that lets you pick which assembler to target. The name of the assembler will be shown with the detected version number. If the assembler executable isn't configured, "[latest version]" will be shown instead of a version number.

The Settings button will take you directly to the assembler configuration tab in the application settings dialog.

Hit the Generate button to generate the source code into a file on disk. The file will use the project name, with the ".dis65" replaced by "_<assembler>.S".

The first 64KiB of each generated file will be shown in the preview window. If multiple files were generated, you can use the "preview file" drop-down to select between them. Line numbers are prepended to each line to make it easier to track down errors.

Label Localizer

The label localizer is an optional feature that automatically converts some labels to an assembler-specific less-than-global label format. Local labels may be reusable (e.g. using "]LOOP" for multiple consecutive loops is easier to understand than giving each one a unique label) or reduce the size of a generated link table. There are usually restrictions on local labels, e.g. references to them may not be allowed to cross a global label definition, which the localizer factors in automatically.

The localizer is somewhat experimental at this time, and can be disabled from the application settings.

Cross-Assembling Generated Code

After generating sources, if you have a cross-assembler executable configured, you can run it by clicking the "Run Assembler" button. The command-line output will be displayed, with stdout and stderr separated. (I'd prefer them to be interleaved, but that's not what the system provides.)

The output will show the assembler's exit code, which will be zero on success (note: sometimes they lie.) If it appeared to succeed, SourceGen will then compare the assembler's output to the original file, and report any differences.

Failures here may be due to bugs in the cross-assembler or in SourceGen. However, SourceGen can generally work around assembler bugs, so any failure is an opportunity for improvement.

Assembler-Specific Bugs & Quirks

This is a list of bugs and quirky behavior in cross-assemblers that SourceGen works around when generating code.

Every assembler seems to have a different way of dealing with expressions. Most of them will let you group expressions with parenthesis, but that doesn't always help. For example, PEA label >> 8 + 1 is perfectly valid, but writing PEA (label >> 8) + 1 will cause most assemblers to assume you're trying to use an alterate form of PEA with indirect addressing (which doesn't exist). The code generator needs to understand expression syntax and operator precedence to generate correct code, but also needs to know how to handle the corner cases.

64tass

Code is generated for 64tass v1.53.1515.

Bugs:

• Undocumented opcodes: SHA (ZP),Y ($93) is not supported; the assembler appears to be expecting SHA ABS,X instead.
• BRK, COP, and WDM are not allowed to have operands.

Quirks:

• The underscore character ('_') is allowed as a character in labels, but when used as the first character in a label it indicates the label is local. If you create labels with leading underscores that are not local, the labels must be altered to start with some other character, and made unique.
• Labels starting with two underscores are "reserved". Trying to use them causes an error.
• By default, 64tass sets the first two bytes of the output file to the load address. The --nostart flag is used to suppress this.
• By default, 64tass is case-insensitive, but SourceGen treats labels as case-sensitive. The --case-sensitive must be passed to the assembler.
• If you set the --case-sensitive flag, all opcodes and operands must be lower-case. Most of the flags used to show things in upper case must be disabled.
• For 65816, selecting the bank byte is done with the back-quote ('`') rather than the caret ('^'). (There's a note in the docs to the effect that they plan to move to carets.)

cc65

Code is generated for cc65 v2.27.

Bugs:

• The arguments to MVN/MVP are reversed.
• PC relative branches don't wrap around at bank boundaries.
• BRK <arg> is assembled to opcode $05 rather than $00.
• WDM is not supported.

Quirks:

• Operator precedence is unusual. Consider label >> 8 - 16. cc65 puts shift higher than subtraction, whereas languages like C and assemblers like 64tass do it the other way around. So cc65 regards the expression as (label >> 8) - 16, while the more common interpretation would be label >> (8 - 16). (This is actually somewhat convenient, since many common expressions don't require parenthesis.)
• Undocumented opcodes: SBX ($cb) uses the mnemonic AXS. All other opcodes match up with the "unintended opcodes" document.

Merlin 32

Code is generated for Merlin 32 v1.0.

Bugs:

• PC relative branches don't wrap around at bank boundaries.
• For some failures, an exit code of zero is returned.

Quirks:

• Operator precedence is unusual. Expressions are processed from left to right, with no operator precedence.
• The byte selection operators ('<', '>', '^') are actually word-selection operators, yielding 16-bit values when wide registers are enabled on the 65816.
• The assembler tracks register widths when it sees SEP/REP instructions, but doesn't attempt to track the emulation flag. So if the registers are long when you switch to emulation, incorrect code is generated. (Really I just want to be able to turn the auto-tracking off.)
• Non-unique local labels don't cause an error.

Back to index