6502/6502bench
1
0
Fork 0
mirror of https://github.com/fadden/6502bench.git synced 2024-11-29 10:50:28 +00:00
Code Issues Projects Releases Wiki Activity
96a92f0335
6502bench/SourceGen/CodeAnalysis.cs
Andy McFadden 47b1363738 Add more detail to cross references 
In the cross-reference table we now indicate whether the reference
source is doing a read, write, read-modify-write, branch, subroutine
call, is just referencing the address, or is part of the data.
2019-04-11 16:23:02 -07:00

1070 lines
49 KiB
C#
Raw Blame History

/*
* Copyright 2018 faddenSoft
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
using System;
using System.Collections.Generic;
using System.Diagnostics;
using Asm65;
using CommonUtil;
using PluginCommon;
using SourceGen.Sandbox;
namespace SourceGen {
/// <summary>
/// Instruction analyzer.
///
/// All data held in this object is transient, and will be discarded when analysis
/// completes. All user-defined values should be held elsewhere and provided as inputs
/// to the analyzer. Any change that merits re-analysis should be handled by creating a
/// new instance of this object.
///
/// See the comments at the top of UndoableChange for a list of things that can
/// mandate code re-analysis.
/// </summary>
public class CodeAnalysis {
/// <summary>
/// Type hints are specified by the user. The identify a region as being code
/// or data. The code analyzer will stop at data-hinted regions, and will
/// process any code-hinted regions during the dead-code pass.
///
/// The hints are not used directly by the data analyzer, but the effects they
/// have on the Anattrib array are.
/// </summary>
public enum TypeHint : sbyte {
// No hint. Default value populated in new arrays.
NoHint = 0,
// Byte is an instruction. If the code analyzer doesn't find this
// naturally, it will be scanned.
Code,
// Byte is inline data. Execution continues "through" the byte.
InlineData,
// Byte is data. Execution halts.
Data
}
/// <summary>
/// Class for handling callbacks from extension scripts.
/// </summary>
private class ScriptSupport : MarshalByRefObject, PluginCommon.IApplication {
private CodeAnalysis mOuter;
public ScriptSupport(CodeAnalysis ca) {
mOuter = ca;
}
/// <summary>
/// Call this when analysis is complete, to ensure that over-active scripts
/// can't keep doing things. (This is not part of IApplication.)
/// </summary>
public void Shutdown() {
mOuter = null;
}
public void DebugLog(string msg) {
mOuter.mDebugLog.LogI("PLUGIN: " + msg);
}
public bool SetOperandFormat(int offset, DataSubType subType, string label) {
return mOuter.SetOperandFormat(offset, subType, label);
}
public bool SetInlineDataFormat(int offset, int length, DataType type,
DataSubType subType, string label) {
return mOuter.SetInlineDataFormat(offset, length, type, subType, label);
}
}
/// <summary>
/// Extension script manager.
/// </summary>
private ScriptManager mScriptManager;
/// <summary>
/// Local object that implements the IApplication interface for plugins.
/// </summary>
private ScriptSupport mScriptSupport;
/// <summary>
/// List of interesting plugins. If we have plugins that don't do code inlining we
/// can ignore them. (I'm using an array instead of a List&lt;IPlugin&gt; as a
/// micro-optimization; see https://stackoverflow.com/a/454923/294248 .)
/// </summary>
private IPlugin[] mScriptArray;
/// <summary>
/// CPU to use when analyzing data.
/// </summary>
private CpuDef mCpuDef;
/// <summary>
/// Map of offsets to addresses.
/// </summary>
private AddressMap mAddrMap;
/// <summary>
/// Reference to 65xx data.
/// </summary>
private byte[] mFileData;
/// <summary>
/// Attributes, one per byte in input file.
/// </summary>
private Anattrib[] mAnattribs;
/// <summary>
/// Reference to type hint array, one hint per byte.
/// </summary>
private TypeHint[] mTypeHints;
/// <summary>
/// Reference to status flag override array, one entry per byte.
/// </summary>
private StatusFlags[] mStatusFlagOverrides;
/// <summary>
/// Initial status flags to use at entry points.
/// </summary>
private StatusFlags mEntryFlags;
/// <summary>
/// Debug trace log.
/// </summary>
private DebugLog mDebugLog = new DebugLog(DebugLog.Priority.Silent);
/// <summary>
/// Constructor.
/// </summary>
/// <param name="data">65xx code stream.</param>
/// <param name="cpuDef">CPU definition to use when interpreting code.</param>
/// <param name="anattribs">Anattrib array. Expected to be newly allocated, all
/// entries set to default values.</param>
/// <param name="addrMap">Map of offsets to addresses.</param>
/// <param name="hints">Type hints, one per byte.</param>
/// <param name="statusFlagOverrides">Status flag overrides for instruction-start
/// bytes.</param>
/// <param name="entryFlags">Status flags to use at code entry points.</param>
/// <param name="scriptMan">Extension script manager.</param>
/// <param name="debugLog">Object that receives debug log messages.</param>
public CodeAnalysis(byte[] data, CpuDef cpuDef, Anattrib[] anattribs,
AddressMap addrMap, TypeHint[] hints, StatusFlags[] statusFlagOverrides,
StatusFlags entryFlags, ScriptManager scriptMan, DebugLog debugLog) {
mFileData = data;
mCpuDef = cpuDef;
mAnattribs = anattribs;
mAddrMap = addrMap;
mTypeHints = hints;
mStatusFlagOverrides = statusFlagOverrides;
mEntryFlags = entryFlags;
mScriptManager = scriptMan;
mDebugLog = debugLog;
mScriptSupport = new ScriptSupport(this);
}
// Internal log functions. If we're concerned about performance overhead due to
// call-site string concatenation, we can #ifdef these to nothing in release builds,
// which should allow the compiler to elide the concat.
#if false
private void LogV(int offset, string msg) {
if (mDebugLog.IsLoggable(DebugLog.Priority.Verbose)) {
mDebugLog.LogV("+" + offset.ToString("x6") + " " + msg);
}
}
#else
private void LogV(int offset, string msg) { }
#endif
#if true
private void LogD(int offset, string msg) {
if (mDebugLog.IsLoggable(DebugLog.Priority.Debug)) {
mDebugLog.LogD("+" + offset.ToString("x6") + " " + msg);
}
}
private void LogI(int offset, string msg) {
if (mDebugLog.IsLoggable(DebugLog.Priority.Info)) {
mDebugLog.LogI("+" + offset.ToString("x6") + " " + msg);
}
}
private void LogW(int offset, string msg) {
if (mDebugLog.IsLoggable(DebugLog.Priority.Warning)) {
mDebugLog.LogW("+" + offset.ToString("x6") + " " + msg);
}
}
private void LogE(int offset, string msg) {
if (mDebugLog.IsLoggable(DebugLog.Priority.Error)) {
mDebugLog.LogE("+" + offset.ToString("x6") + " " + msg);
}
}
#else
private void LogD(int offset, string msg) { }
private void LogI(int offset, string msg) { }
private void LogW(int offset, string msg) { }
private void LogE(int offset, string msg) { }
#endif
/// <summary>
/// Analyze a blob of code and data, annotating all code areas.
///
/// Also identifies data embedded in code, e.g. parameter blocks following a JSR,
/// with the help of extension scripts.
///
/// Failing here can leave us in a strange state, so prefer to work around unexpected
/// inputs rather than bailing entirely.
/// </summary>
public void Analyze() {
List<int> scanOffsets = new List<int>();
mDebugLog.LogI("Analyzing code: " + mFileData.Length + " bytes, CPU=" + mCpuDef.Name);
PrepareScripts();
SetAddresses();
// Set the "is data" and "is inline data" flags on anything that the user has
// flagged as being such. This tells us to stop processing or skip over bytes
// as we work. We don't need to flag code hints explicitly for analysis, but
// we want to be able to display the flags in the info window.
//
// The data recognizers may spot additional inline data offsets as we work. This
// can cause a race if it mis-identifies code that is also a branch target;
// whichever marks the code first will win.
UnpackTypeHints();
// Find starting place, based on type hints.
// We only set the "visited" flag on the instruction start, so if the user
// puts a code hint in the middle of an instruction, we will find it and
// treat it as an entry point. (This is useful for embedded instructions
// that are branched to by code we aren't able to detect.)
int searchStart = FindFirstUnvisitedInstruction(0);
while (searchStart >= 0) {
mAnattribs[searchStart].IsEntryPoint = true;
mAnattribs[searchStart].StatusFlags = mEntryFlags;
mAnattribs[searchStart].ApplyStatusFlags(mStatusFlagOverrides[searchStart]);
int offset = searchStart;
while (true) {
bool embedded = (mAnattribs[offset].IsInstruction &&
!mAnattribs[offset].IsVisited);
LogI(offset, "Scan chunk (vis=" + mAnattribs[offset].IsVisited +
" chg=" + mAnattribs[offset].IsChanged +
(embedded ? " embedded " : "") + ")");
AnalyzeSegment(offset, scanOffsets);
// Did anything new get added?
if (scanOffsets.Count == 0) {
break;
}
// Pop one off the end.
int lastItem = scanOffsets.Count - 1;
offset = scanOffsets[lastItem];
scanOffsets.RemoveAt(lastItem);
}
searchStart = FindFirstUnvisitedInstruction(searchStart);
}
mScriptSupport.Shutdown();
MarkUnexecutedEmbeddedCode();
}
/// <summary>
/// Prepare a list of relevant extension scripts.
/// </summary>
private void PrepareScripts() {
if (mScriptManager == null) {
// Currently happens for regression tests with no external files.
mScriptArray = new IPlugin[0];
return;
}
// Include all scripts.
mScriptArray = mScriptManager.GetAllInstances().ToArray();
// Prep them.
mScriptManager.PrepareScripts(mScriptSupport);
}
/// <summary>
/// Sets the address for every byte in the input.
/// </summary>
private void SetAddresses() {
// The AddressMap will have at least one entry, will start at offset 0, and
// will exactly span the file.
foreach (AddressMap.AddressMapEntry ent in mAddrMap) {
int addr = ent.Addr;
for (int i = ent.Offset; i < ent.Offset + ent.Length; i++) {
mAnattribs[i].Address = addr++;
}
}
}
/// <summary>
/// Sets the "is xxxxx" flags on type-hinted entries, so that the code analyzer
/// can find them easily.
/// </summary>
private void UnpackTypeHints() {
Debug.Assert(mTypeHints.Length == mAnattribs.Length);
int offset = 0;
foreach (TypeHint hint in mTypeHints) {
switch (hint) {
case TypeHint.Code:
// Set the IsInstruction flag to prevent inline data from being
// placed here.
OpDef op = mCpuDef.GetOpDef(mFileData[offset]);
if (op == OpDef.OpInvalid) {
LogI(offset, "Ignoring code hint on illegal opcode");
} else {
mAnattribs[offset].IsHinted = true;
mAnattribs[offset].IsInstruction = true;
}
break;
case TypeHint.Data:
// Tells the code analyzer to stop. Does not define a data analyzer
// "uncategorized data" boundary.
mAnattribs[offset].IsHinted = true;
mAnattribs[offset].IsData = true;
break;
case TypeHint.InlineData:
// Tells the code analyzer to walk across these.
mAnattribs[offset].IsHinted = true;
mAnattribs[offset].IsInlineData = true;
break;
case TypeHint.NoHint:
break;
default:
Debug.Assert(false);
break;
}
offset++;
}
}
/// <summary>
/// Finds the first offset that is hinted as code but hasn't yet been visited.
///
/// This might be in the middle of an already-visited instruction.
/// </summary>
/// <param name="start">Offset at which to start the search.</param>
/// <returns>Offset found.</returns>
private int FindFirstUnvisitedInstruction(int start) {
for (int i = start; i < mAnattribs.Length; i++) {
if (mAnattribs[i].IsHinted && mTypeHints[i] == TypeHint.Code &&
!mAnattribs[i].IsVisited) {
LogD(i, "Unvisited code hint");
if (mAnattribs[i].IsData || mAnattribs[i].IsInlineData) {
// Maybe the user put a code hint on something that was
// later recognized as inline data? Shouldn't have been allowed.
LogW(i, "Weird: code hint on data/inline");
continue;
}
return i;
}
}
return -1;
}
/// <summary>
/// Finds bits of code that are part of embedded instructions but not actually
/// executed, and marks them as inline data.
/// </summary>
private void MarkUnexecutedEmbeddedCode() {
// The problem arises when you have a line like 4C 60 EA, with a branch to the
// middle byte. The formatter will print "JMP $EA60", then "<label> RTS", and
// then should print NOP. The problem is that the NOP wasn't reached by the
// code analyzer, and so isn't tagged as an instruction start. It's effectively
// inline data, so we need to mark it that way.
//
// We don't have a quick way to find these, so we just run through the list.
for (int offset = 0; offset < mFileData.Length; ) {
if (mAnattribs[offset].IsInstructionStart) {
int len;
for (len = 1; len < mAnattribs[offset].Length; len++) {
if (mAnattribs[offset + len].IsInstructionStart) {
break;
}
}
offset += len;
} else if (mAnattribs[offset].IsInstruction) {
// bingo
LogI(offset, "Fixing embedded orphan");
mAnattribs[offset].IsInstruction = false;
mAnattribs[offset].IsInlineData = true;
mAnattribs[offset].DataDescriptor = FormatDescriptor.Create(1,
FormatDescriptor.Type.NumericLE, FormatDescriptor.SubType.None);
offset++;
} else {
offset++;
}
}
}
/// <summary>
/// Analyzes a code segment. A code segment is a contiguous series of instructions.
/// We halt if we encounter a return, always-taken branch, or the end of the
/// current address map section.
///
/// If we find branches to unvisited code, or previously-visited code that has
/// different status flags, we add that to the list of offsets to scan.
/// </summary>
/// <param name="offset">Starting offset.</param>
/// <param name="scanOffsets">Collection to which additional offsets of interest will
/// be added.</param>
private void AnalyzeSegment(int offset, List<int> scanOffsets) {
while (offset < mFileData.Length) {
if (mAnattribs[offset].IsVisited && !mAnattribs[offset].IsChanged) {
// already visited, not changed; nothing to do
LogD(offset, "Visited and not changed, bailing");
return;
}
bool firstVisit = !mAnattribs[offset].IsVisited;
// Set "visited" flag, clear "changed".
mAnattribs[offset].IsVisited = true;
mAnattribs[offset].IsChanged = false;
if (mAnattribs[offset].IsData) {
// This area was declared to be data. Go no further. This shouldn't
// usually happen -- either we should have stopped tracing, or we
// should have identified the data area as code.
LogI(offset, "Code ran into data section");
Debug.Assert(false);
return;
} else if (mAnattribs[offset].IsInlineData) {
// Generally this won't happen, because we ignore branches into inline data
// areas, we reject attempts to convert code to inline data, and we can't
// start in an inline area because the hint is wrong. However, it's possible
// for a JSR to a new section to be registered, and then before we get to
// it an extension script formats the area as inline data. In that case
// the inline data "wins", and we stop here.
LogW(offset, "Code ran into inline data section");
return;
}
// Identify the instruction, and see if it runs off the end of the file.
// If it does, treat it as data.
OpDef op = mCpuDef.GetOpDef(mFileData[offset]);
int instrLen = op.GetLength(mAnattribs[offset].StatusFlags);
LogV(offset, "OP $" + mFileData[offset].ToString("X2") + " len=" + instrLen);
if (offset + instrLen > mFileData.Length) {
// Instruction runs off the end. It's possible we visited here before with
// short M/X flags, or some other code jumps to code embedded in our
// operand. Whatever the case, we want to clear the instruction flag from
// the first byte. We can mark it as data so subsequent passes don't
// bump into this.
LogW(offset, "Instruction runs off end of file");
mAnattribs[offset].IsInstructionStart = false;
mAnattribs[offset].IsInstruction = false;
mAnattribs[offset].IsData = true;
return;
}
if (mAnattribs[offset + instrLen -1].Address !=
mAnattribs[offset].Address + instrLen - 1) {
// Address change happened mid-instruction. Mark it as data.
LogW(offset, "Detected address change mid-instruction");
mAnattribs[offset].IsInstructionStart = false;
mAnattribs[offset].IsInstruction = false;
mAnattribs[offset].IsData = true;
return;
}
// Instruction not defined for this CPU. Treat as data.
if (op.AddrMode == OpDef.AddressMode.Unknown) {
LogW(offset, "Instruction stream encountered invalid opcode ($" +
mFileData[offset].ToString("x2") + ")");
return;
}
// Flag as start of valid instruction, and mark all bytes as instructions.
// There's a possible conflict here if the first byte is marked as an
// instruction, but bytes within the instruction are marked as data. The
// easiest thing to do here is steamroll the data flags.
//
// (To cause this, hint a 3-byte instruction as data/inline-data, then
// hint the first byte of the instruction as code.)
mAnattribs[offset].IsInstructionStart = true;
mAnattribs[offset].Length = instrLen;
for (int i = offset; i < offset + instrLen; i++) {
if (mAnattribs[i].IsData) {
LogW(i, "Stripping mid-instruction data flag");
mAnattribs[i].IsData = false;
} else if (mAnattribs[i].IsInlineData) {
LogW(i, "Stripping mid-instruction inline-data flag");
mAnattribs[i].IsInlineData = false;
}
mAnattribs[i].IsInstruction = true;
}
// Compute the effect on the status flags.
StatusFlags newFlags, condBranchTakenFlags;
if (op == OpDef.OpPLP_StackPull) {
// PLP restores flags from the stack.
newFlags = condBranchTakenFlags = GuessFlagsForPLP(offset);
} else {
op.ComputeFlagChanges(mAnattribs[offset].StatusFlags, mFileData, offset,
out newFlags, out condBranchTakenFlags);
}
// Handle stuff that won't be different on a subsequent visit.
if (firstVisit) {
// Decode the operand for instructions that reference an address. If
// the target address is within the file's address space, record the
// offset as well. This doesn't examine immediate operands.
DecodeOperandAddress(offset, op);
}
int branchOffset = -1;
bool doBranch, doContinue;
// Check for branching.
if (op.IsBranchOrSubCall) {
if (mAnattribs[offset].IsOperandOffsetDirect) {
branchOffset = mAnattribs[offset].OperandOffset;
}
if (branchOffset >= 0 && branchOffset < mFileData.Length) {
doBranch = true;
} else {
// External branch. Very common for JSR to ROM routines and JMP
// through an indirect address. Not usually expected for relative
// branches.
if (op.Effect != OpDef.FlowEffect.CallSubroutine) {
LogD(offset, "Branch goes external");
}
doBranch = false;
mAnattribs[offset].IsExternalBranch = true;
}
} else {
doBranch = false;
}
// Check continuation to next instruction.
switch (op.Effect) {
case OpDef.FlowEffect.Cont:
case OpDef.FlowEffect.CallSubroutine:
case OpDef.FlowEffect.ConditionalBranch:
doContinue = true;
break;
default:
doContinue = false;
break;
}
// Some 6502 code works around the lack of a branch-always instruction with
// a complement pair (e.g. BCC + BCS), so we don't want to continue past a branch
// always taken. The converse is also true: don't pursue a branch if it's
// never taken. An example from 6502.org:
// "... a common sequence on the 6502 family is:
// CLEAR_FLAG CLC
// DB $B0
// SET_FLAG SEC
// ROR FLAG
// RTS
// When entering via CLEAR_FLAG, the $B0 becomes a 2-cycle BCS instruction, which
// is not taken (since the carry is clear). Since BCS does not affect any flags,
// it serves, in this situation, as a two byte, two cycle NOP and provides a
// subtle, but useful way to efficiently skip the SEC instruction."
// Revise branch/cont for conditional branch instructions.
if (op.Effect == OpDef.FlowEffect.ConditionalBranch) {
OpDef.BranchTaken taken =
OpDef.IsBranchTaken(op, mAnattribs[offset].StatusFlags);
if (taken == OpDef.BranchTaken.Never) {
doBranch = false;
} else if (taken == OpDef.BranchTaken.Always) {
doContinue = false;
}
mAnattribs[offset].BranchTaken = taken;
}
// Make sure destination isn't already flagged as data.
if (doBranch) {
Debug.Assert(branchOffset >= 0);
if (mAnattribs[branchOffset].IsData || mAnattribs[branchOffset].IsInlineData) {
LogW(offset, "Ignoring branch to +" + branchOffset.ToString("x6") +
" (data region)");
doBranch = false;
branchOffset = -1;
}
}
LogV(offset, "doBranch=" + doBranch + ", doCont=" + doContinue);
if (doBranch) {
// Flag the destination offset as a branch target.
mAnattribs[branchOffset].IsBranchTarget = true;
// Merge our status flags with theirs.
StatusFlags branchStatusBefore = mAnattribs[branchOffset].StatusFlags;
mAnattribs[branchOffset].MergeStatusFlags(condBranchTakenFlags);
mAnattribs[branchOffset].ApplyStatusFlags(mStatusFlagOverrides[branchOffset]);
// If we need to (re-)scan this offset, add it to the list.
//AttribFlags branchFlags = mAnattribs[branchOffset].mAttribFlags;
bool addToScan = false;
string why;
if (!mAnattribs[branchOffset].IsVisited) {
// Not yet visited. Some flags may have been set by earlier branch.
// Merge status flags and add to scan list if not already present.
addToScan = true;
why = "(not visited)";
} else {
// Visited before. If the status flags changed, set "changed" and
// add to scan offsets.
if (branchStatusBefore != mAnattribs[branchOffset].StatusFlags) {
mAnattribs[branchOffset].IsChanged = true;
addToScan = true;
}
why = "(flags: " + branchStatusBefore + " -> " +
mAnattribs[branchOffset].StatusFlags + ")";
}
if (addToScan && !scanOffsets.Contains(branchOffset)) {
LogD(offset, "Adding " + branchOffset.ToString("x4") +
" to scan list " + why);
scanOffsets.Add(branchOffset);
}
}
if (!doContinue) {
mAnattribs[offset].DoesNotContinue = true;
break;
} else {
mAnattribs[offset].DoesNotContinue = false;
}
// Sanity check to avoid infinite loop.
if (instrLen <= 0) {
LogE(offset, "Internal error: instruction length " + instrLen);
throw new Exception("Instruction length was " + instrLen);
}
int nextOffset = offset + instrLen;
if (nextOffset >= mFileData.Length) {
// next instruction is off the end of the file
LogW(offset, "Execution ran off the end of the file");
break;
}
// On first visit, check for JSR/JSL inline call.
if (firstVisit) {
// Currently ignoring OpDef.OpJSR_AbsIndexXInd
if (op == OpDef.OpJSR_Abs || op == OpDef.OpJSR_AbsLong) {
CheckForInlineCall(op, offset, out bool noContinue);
if (noContinue) {
LogD(offset, "Script declared inline call no-continue");
mAnattribs[offset].DoesNotContinue = true;
break;
}
}
}
// Are we about to walk into inline data?
int inlineDataGapLen = 0;
while (nextOffset < mFileData.Length && mAnattribs[nextOffset].IsInlineData) {
// Skip over it to find next instruction (or next inline data chunk).
// Note Anattrib.Length==0 unless a format has been applied, so we just
// walk forward a byte at a time.
inlineDataGapLen++;
nextOffset++;
}
// Re-check after inline data advance.
if (nextOffset >= mFileData.Length) {
// next instruction is off the end of the file
LogW(offset, "Execution ran off the end of the file");
break;
}
if (mAnattribs[nextOffset].IsData) {
// Drove into a data section
LogW(offset, "Execution ran into a data area");
break;
}
// Make sure we don't "continue" across an ORG.
// NOTE: it's possible to do some crazy things with multiple ORGs that will
// cause us to misinterpret things, but I don't think that matters. What's
// important is that the code analyzer doesn't drive into a data area.
int expectedAddr = mAnattribs[offset].Address + mAnattribs[offset].Length +
inlineDataGapLen;
if (mAnattribs[nextOffset].Address != expectedAddr) {
LogW(offset, "Execution ran across address change (" +
expectedAddr.ToString("x4") + " vs. " +
mAnattribs[nextOffset].Address.ToString("x4") + ")");
break;
}
// Merge the updated status flags into the next instruction.
StatusFlags nextStatusBefore = mAnattribs[nextOffset].StatusFlags;
mAnattribs[nextOffset].MergeStatusFlags(newFlags);
mAnattribs[nextOffset].ApplyStatusFlags(mStatusFlagOverrides[nextOffset]);
// If we've already visited the next offset, and the updated status flags are
// the same as the previous status flags, then there's nothing to gain by
// continuing forward.
if (mAnattribs[nextOffset].IsVisited) {
if (!mAnattribs[nextOffset].IsChanged &&
nextStatusBefore == mAnattribs[nextOffset].StatusFlags) {
// Instruction has been visited, hasn't been flagged as changed,
// and our status flag merge had no effect. No need to continue
// through.
LogV(offset, "Not re-examining " + nextOffset);
break;
}
}
offset = nextOffset;
}
}
/// <summary>
/// Attempts to guess what the flags will be after a PLP instruction.
/// </summary>
/// <param name="plpOffset">Offset of PLP instruction.</param>
/// <returns>Best guess at status flags.</returns>
private StatusFlags GuessFlagsForPLP(int plpOffset) {
// We're not tracking stack contents or register contents, so this just
// generally won't work. However, there's a lot of code that uses PHP to
// save the current state and PLP to restore it, so if we can find a nearby
// PHP we can just grab from that.
//
// Failing that, we mark all flags as "indeterminate" and let the user sort
// out what it should be. It's unlikely to matter except for M/X flags on
// the 65816.
//
// The emulation flag is not part of the status register, even if we do carry
// it around like one. The E-flag is always carried over from the previous
// instruction.
int backOffsetLimit = plpOffset - 128; // arbitrary 128-byte reach
if (backOffsetLimit < 0) {
backOffsetLimit = 0;
}
StatusFlags flags = StatusFlags.AllIndeterminate;
for (int offset = plpOffset - 1; offset >= backOffsetLimit; offset--) {
Anattrib attr = mAnattribs[offset];
if (!attr.IsInstructionStart || !attr.IsVisited) {
continue;
}
OpDef op = mCpuDef.GetOpDef(mFileData[offset]);
if (op == OpDef.OpPHP_StackPush) {
LogI(plpOffset, "Found visited PHP at +" + offset.ToString("x6"));
flags = mAnattribs[offset].StatusFlags;
break;
}
}
// Transfer the 'E' flag.
flags.E = mAnattribs[plpOffset].StatusFlags.E;
return flags;
}
/// <summary>
/// Extracts the address from the operand of an absolute or relative operation.
/// Anything that could be referenced by a label or address equate is appropriate.
/// The goal is to identify data and branch targets, not generate a second copy
/// of the operand.
///
/// The operand's address, and if applicable, the operand's file offset, are
/// stored in the Anattrib array.
///
/// For PC-relative operands (e.g. branches) it's tempting to simply adjust the file
/// offset by the specified amount and convert that to an address. If the file
/// has multiple ORGs, this can produce incorrect results. We need to convert the
/// opcode's offset to an address, adjust by the operand, and then find the file
/// offset that corresponds to the target address.
///
/// Doesn't do anything with immediate data.
/// </summary>
/// <param name="offset">Offset of the instruction opcode.</param>
/// <param name="op">Opcode being handled. (Passed in because the caller has it
/// handy.)</param>
private void DecodeOperandAddress(int offset, OpDef op) {
//StatusFlags flags = mAnattribs[offset].StatusFlags;
int operand = op.GetOperand(mFileData, offset, mAnattribs[offset].StatusFlags);
// Add the bank to get a 24-bit address. We're currently using the program bank
// (K) rather than the data bank (B), which is correct for absolute and relative
// branches but wrong for 16-bit data operations. We currently have no way to
// know what the value of B is, so we use K because there's some small chance
// of it being correct.
// TODO(someday): figure out how to get the correct value for the B reg
int bank = mAnattribs[offset].Address & 0x7fff0000;
// Extract target address.
switch (op.AddrMode) {
// These might refer to a location in the file, or might be external.
case OpDef.AddressMode.Abs:
case OpDef.AddressMode.AbsIndexX:
case OpDef.AddressMode.AbsIndexY:
case OpDef.AddressMode.AbsIndexXInd:
case OpDef.AddressMode.AbsInd:
case OpDef.AddressMode.AbsIndLong:
case OpDef.AddressMode.StackAbs:
mAnattribs[offset].OperandAddress = operand | bank;
break;
case OpDef.AddressMode.DP:
case OpDef.AddressMode.DPIndexX:
case OpDef.AddressMode.DPIndexY:
case OpDef.AddressMode.DPIndexXInd:
case OpDef.AddressMode.DPInd:
case OpDef.AddressMode.DPIndLong:
case OpDef.AddressMode.DPIndIndexY:
case OpDef.AddressMode.DPIndIndexYLong:
case OpDef.AddressMode.StackDPInd:
// always bank 0
mAnattribs[offset].OperandAddress = operand;
break;
case OpDef.AddressMode.AbsIndexXLong:
case OpDef.AddressMode.AbsLong:
// 24-bit address, don't add bank
mAnattribs[offset].OperandAddress = operand;
break;
case OpDef.AddressMode.PCRel: // rel operand; convert to absolute addr
mAnattribs[offset].OperandAddress =
Asm65.Helper.RelOffset8(mAnattribs[offset].Address,
(sbyte)operand) | bank;
break;
case OpDef.AddressMode.PCRelLong:
case OpDef.AddressMode.StackPCRelLong:
mAnattribs[offset].OperandAddress =
Asm65.Helper.RelOffset16(mAnattribs[offset].Address,
(short)operand) | bank;
break;
default:
// Immediate, implied, accumulator, stack relative. We can't do
// immediate yet because we won't necessarily have a final assessment
// of the operand width.
Debug.Assert(mAnattribs[offset].OperandAddress == -1);
break;
}
if (mAnattribs[offset].OperandAddress >= 0) {
int operandOffset = mAddrMap.AddressToOffset(offset,
mAnattribs[offset].OperandAddress);
if (operandOffset >= 0) {
mAnattribs[offset].OperandOffset = operandOffset;
// Set a flag if this is a direct offset. This is used when tracing
// through jump instructions, as we can't necessarily decode an indirect
// jump. (There are *some* indirect JMPs we can handle, if the operand
// is an address in the file data area.)
switch (op.AddrMode) {
case OpDef.AddressMode.Abs:
case OpDef.AddressMode.AbsLong:
case OpDef.AddressMode.DP:
case OpDef.AddressMode.PCRel:
case OpDef.AddressMode.PCRelLong:
case OpDef.AddressMode.StackPCRelLong:
case OpDef.AddressMode.StackAbs:
mAnattribs[offset].IsOperandOffsetDirect = true;
break;
default:
mAnattribs[offset].IsOperandOffsetDirect = false;
break;
}
}
} else {
Debug.Assert(mAnattribs[offset].OperandOffset == -1);
Debug.Assert(!mAnattribs[offset].IsOperandOffsetDirect);
}
}
/// <summary>
/// Queries script extensions to check to see if a JSR or JSL is actually an inline call.
/// </summary>
/// <param name="op">Instruction being examined.</param>
/// <param name="offset">File offset of start of instruction.</param>
/// <param name="noContinue">Set if any plugin declares the call to be no-continue.</param>
private void CheckForInlineCall(OpDef op, int offset, out bool noContinue) {
noContinue = false;
for (int i = 0; i < mScriptArray.Length; i++) {
IPlugin script = mScriptArray[i];
if (op == OpDef.OpJSR_Abs) {
script.CheckJsr(offset, out bool noCont);
noContinue |= noCont;
} else if (op == OpDef.OpJSR_AbsLong) {
script.CheckJsl(offset, out bool noCont);
noContinue |= noCont;
} else {
Debug.Assert(false);
}
}
}
private bool SetOperandFormat(int offset, DataSubType subType, string label) {
if (offset <= 0 || offset > mFileData.Length) {
throw new Exception("SOF: bad args: offset=+" + offset.ToString("x6") +
" subType=" + subType + " label='" + label + "'; file length is" +
mFileData.Length);
}
// Don't overwrite existing format.
if (mAnattribs[offset].DataDescriptor != null) {
LogW(offset, "SOF: already have a descriptor here");
return false;
}
// Must be the start of an instruction.
if (!mAnattribs[offset].IsInstructionStart) {
LogW(offset, "SOF: not an instruction start");
return false;
}
if (subType == DataSubType.Symbol && string.IsNullOrEmpty(label)) {
LogW(offset, "SOF rej: label required for subType=" + subType);
return false;
}
FormatDescriptor.SubType subFmt = ConvertPluginSubType(subType, out bool isNumericSub);
if (!isNumericSub && subFmt != FormatDescriptor.SubType.None) {
LogW(offset, "SOF: bad sub-type " + subType);
return false;
}
int instrLen = mAnattribs[offset].Length;
Debug.Assert(instrLen > 0);
FormatDescriptor fd;
if (subType == DataSubType.Symbol) {
fd = FormatDescriptor.Create(instrLen,
new WeakSymbolRef(label, WeakSymbolRef.Part.Low),
false);
} else {
fd = FormatDescriptor.Create(instrLen, FormatDescriptor.Type.NumericLE, subFmt);
}
mAnattribs[offset].DataDescriptor = fd;
return true;
}
/// <summary>
/// Handles a set data format call from an extension script.
/// </summary>
private bool SetInlineDataFormat(int offset, int length, DataType type,
DataSubType subType, string label) {
if (offset <= 0 || offset + length > mFileData.Length) {
throw new Exception("SIDF: bad args: offset=+" + offset.ToString("x6") +
" len=" + length + " type=" + type + " subType=" + subType +
" label='" + label + "'; file length is" + mFileData.Length);
}
// Already formatted? We only check the initial offset -- overlapping format
// descriptors aren't strictly illegal.
if (mAnattribs[offset].DataDescriptor != null) {
LogW(offset, "SIDF: already have a descriptor here");
return false;
}
// Don't allow formatting of any bytes that are identified as instructions or
// were hinted by the user as something other than inline data. If the code
// analyzer comes crashing through later they'll just stomp on what we've done.
for (int i = offset; i < offset + length; i++) {
if (mTypeHints[i] != TypeHint.NoHint && mTypeHints[i] != TypeHint.InlineData) {
LogW(offset, "SIDF rej: already a hint at " + i.ToString("x6") +
" (" + mTypeHints[i] + ")");
return false;
}
if (mAnattribs[offset].IsInstruction) {
LogW(offset, "SIDF rej: not for use with instructions");
return false;
}
}
// Convert type to FormatDescriptor type, and do some validity checks.
FormatDescriptor.Type fmt = ConvertPluginType(type);
FormatDescriptor.SubType subFmt = ConvertPluginSubType(subType, out bool isNumericSub);
if (type == DataType.Dense && subType != DataSubType.None) {
throw new Exception("SIDF rej: dense data must use subType=None");
}
if (isNumericSub && fmt != FormatDescriptor.Type.NumericLE &&
fmt != FormatDescriptor.Type.NumericBE) {
throw new Exception("SIDF rej: bad type/subType combo: type=" +
type + " subType= " + subType);
}
if ((type == DataType.NumericLE || type == DataType.NumericBE) &&
(length < 1 || length > 4)) {
throw new Exception("SIDF rej: bad length for numeric item (" +
length + ")");
}
if (subType == DataSubType.Symbol && string.IsNullOrEmpty(label)) {
throw new Exception("SIDF rej: label required for subType=" + subType);
}
// Looks good, create a descriptor, and mark all bytes as inline data.
FormatDescriptor fd;
if (subType == DataSubType.Symbol) {
fd = FormatDescriptor.Create(length,
new WeakSymbolRef(label, WeakSymbolRef.Part.Low),
type == DataType.NumericBE);
} else {
fd = FormatDescriptor.Create(length, fmt, subFmt);
}
mAnattribs[offset].DataDescriptor = fd;
for (int i = offset; i < offset + length; i++) {
mAnattribs[i].IsInlineData = true;
}
return true;
}
private FormatDescriptor.Type ConvertPluginType(DataType pluginType) {
switch (pluginType) {
case DataType.NumericLE:
return FormatDescriptor.Type.NumericLE;
case DataType.NumericBE:
return FormatDescriptor.Type.NumericBE;
case DataType.Dense:
return FormatDescriptor.Type.Dense;
case DataType.String:
case DataType.Fill:
default:
// not appropriate for operands, or inline data (?)
throw new Exception("Instr format rej: unexpected format type " + pluginType);
}
}
private FormatDescriptor.SubType ConvertPluginSubType(DataSubType pluginSubType,
out bool isNumericSub) {
isNumericSub = true;
switch (pluginSubType) {
case DataSubType.None:
isNumericSub = false;
return FormatDescriptor.SubType.None;
case DataSubType.Hex:
return FormatDescriptor.SubType.Hex;
case DataSubType.Decimal:
return FormatDescriptor.SubType.Decimal;
case DataSubType.Binary:
return FormatDescriptor.SubType.Binary;
case DataSubType.Ascii:
return FormatDescriptor.SubType.Ascii;
case DataSubType.Address:
return FormatDescriptor.SubType.Address;
case DataSubType.Symbol:
return FormatDescriptor.SubType.Symbol;
default:
throw new Exception("Instr format rej: unexpected sub type " + pluginSubType);
}
}
}
}
Reference in New Issue View Git Blame Copy Permalink