mirror of
https://github.com/fadden/6502bench.git
synced 2024-12-02 13:51:36 +00:00
3ff0fbae34
The regression tests were written with the assumption that all cross assemblers would support 6502, 65C02, and 65816 code. There are a few that support 65816 partially (e.g. ACME) or not at all. To best support these, we need to split some of the tests into pieces, so that important 6502 tests aren't skipped simply because parts of the test also exercise 65816 code. The first step is to change the regression test naming scheme. The old system used 1xxx for tests without project files, and 2xxx for tests with project files. The new system uses 1xxxN / 2xxxN, where N indicates the CPU type: 0 for 6502, 1 for 65C02, and 2 for 65816. For the 1xxxN tests the new value determines which CPU is used, which allows us to move the "allops" 6502/65C02 tests into the no-project category. For 2xxxN it just allows the 6502 and 65816 versions to have the same base name and number. This change updates the first batch of tests. It involves minor changes to the test harness and a whole bunch of renaming.
111 lines
2.6 KiB
ArmAsm
111 lines
2.6 KiB
ArmAsm
; Copyright 2018 faddenSoft. All Rights Reserved.
|
|
; See the LICENSE.txt file for distribution terms (Apache 2.0).
|
|
;
|
|
; Assembler: Merlin 32
|
|
|
|
org $1000
|
|
|
|
; 65816 mode with short regs
|
|
clc
|
|
xce
|
|
sep #$30
|
|
mx %11
|
|
|
|
jsr test1
|
|
jsr test2
|
|
jsr test3
|
|
jsr test4
|
|
jsr test5
|
|
rts
|
|
|
|
; TEST #1: simple example
|
|
test1 lda #$00
|
|
dfb $2c ;BIT abs
|
|
:inner lda #$01
|
|
beq :inner
|
|
rts
|
|
|
|
; TEST #2: embedded with break path
|
|
;
|
|
; Example inspired by incorrect analysis...
|
|
;
|
|
; The code analyzer sees:
|
|
; beq {+03} ;jumps to the $8f
|
|
; lda #$00
|
|
; brk $8f
|
|
; and stops, then pursues the branch. If we try to walk from top
|
|
; to bottom, skipping forward by the full length of an instruction,
|
|
; we'll appear to find ourselves in the middle of an embedded
|
|
; instruction.
|
|
;
|
|
; This is different from the typical embedded instruction,
|
|
; where the inner is contained entirely within the outer.
|
|
test2 sep #$30 ;short regs
|
|
mx %00 ;pretend they're long
|
|
|
|
lda $00 ;load something to scramble flags
|
|
beq :store
|
|
lda #$0000
|
|
:store stal $012345
|
|
rts
|
|
|
|
; TEST #3: embedded with non-instruction byte
|
|
;
|
|
; The code analyzer sees two paths, involving the three bytes.
|
|
; The first is the three-byte JSR, the second is the one-byte
|
|
; RTS. The third NOP byte is never "executed" by the analyzer,
|
|
; but because of the way we display embedded instructions it
|
|
; gets put on its own line. Since it's not an instruction start
|
|
; or a data item, things get confused. (This is referred to as
|
|
; an "embedded orphan" in the code.)
|
|
|
|
test3 dfb $20 ;JSR
|
|
:mid dfb $60 ;RTS
|
|
dfb $ea ;NOP
|
|
bra :mid
|
|
|
|
|
|
; TEST #4: overlapping chain
|
|
;
|
|
; Each BIT instruction is three bytes, and each byte is a branch target,
|
|
; so we get a string of embedded instructions.
|
|
test4
|
|
:bits hex 2c2c2c2c2c2c2c2c2ceaea
|
|
asl
|
|
bcc :bits
|
|
asl
|
|
bcc :bits+1
|
|
asl
|
|
bcc :bits+2
|
|
asl
|
|
bcc :bits+3
|
|
asl
|
|
bcc :bits+4
|
|
asl
|
|
bcc :bits+5
|
|
asl
|
|
bcc :bits+6
|
|
asl
|
|
bcc :bits+7
|
|
asl
|
|
bcc :bits+8
|
|
asl
|
|
bcc :bits+9
|
|
rts
|
|
|
|
; TEST #5: another overlap
|
|
;
|
|
; Trying to be a little different.
|
|
test5 dfb $2c
|
|
:mid1 nop
|
|
hex ad
|
|
:mid2 lda $00
|
|
asl
|
|
bcc :mid1
|
|
asl
|
|
bcc :mid2
|
|
|
|
; TEST #6: "embedded" off the end of the file
|
|
dfb $af ;ldal
|
|
|