6502/6502bench
1
0
Fork 0
mirror of https://github.com/fadden/6502bench.git synced 2024-12-11 13:50:13 +00:00
Code Issues Projects Releases Wiki Activity
e411cca485
6502bench/SourceGen/DisasmProject.cs
Andy McFadden f30780a9de Fix Message update when broken symbolic ref is fixed 
Renaming a user label doesn't cause a re-analysis, just a display
update, because nothing structural is changing.  However, that's not
quite true when you have a reference to a non-existent label (e.g.
"LDA hoser"), and you rename a label to match (e.g. change "blah"
to "hoser").  The most obvious consequence was that the Message list,
which enumerates the broken symbolic references, was not being
updated.

We now identify broken references during the refactoring rename, and
change the reanalysis mode accordingly.

There is a deeper problem, where undoing the label rename does the
wrong thing with the previously-broken symbolic references (in the
earlier example, it "undoes" them to "blah" rather than back to
"hoser").  I added some notes about that, but it's harder to fix.

Also, clean up some code that was still treating ReanalysisScope as
if it were bit flags.
2020-09-04 15:21:47 -07:00

2679 lines
133 KiB
C#
Raw Blame History

/*
* Copyright 2019 faddenSoft
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.IO;
using System.Text;
using Asm65;
using CommonUtil;
using SourceGen.Sandbox;
namespace SourceGen {
/// <summary>
/// All state for an open project.
///
/// This class does no file I/O or user interaction.
/// </summary>
public class DisasmProject : IDisposable {
// Arbitrary 1MB limit. Could be increased to 16MB if performance is acceptable.
public const int MAX_DATA_FILE_SIZE = 1 << 20;
// File magic.
private const long MAGIC = 6982516645493599905;
#region Data that is saved to the project file
// All data held by structures in this section are persistent, and will be
// written to the project file. Anything not in this section may be discarded
// at any time. Smaller items are kept in arrays, with one entry per byte
// of file data.
/// <summary>
/// Length of input data. (This is redundant with FileData.Length while in memory,
/// but we want this value to be serialized into the project file.)
/// </summary>
public int FileDataLength { get; private set; }
/// <summary>
/// CRC-32 on input data.
/// </summary>
public uint FileDataCrc32 { get; private set; }
/// <summary>
/// Map file offsets to addresses.
/// </summary>
public AddressMap AddrMap { get; private set; }
/// <summary>
/// Type hints. Default value is "no hint".
/// </summary>
public CodeAnalysis.TypeHint[] TypeHints { get; private set; }
/// <summary>
/// Status flag overrides. Default value is "all unspecified".
/// </summary>
public StatusFlags[] StatusFlagOverrides { get; private set; }
/// <summary>
/// End-of-line comments. Empty string means "no comment".
/// </summary>
public string[] Comments { get; private set; }
/// <summary>
/// Data Bank Register overrides.
/// </summary>
public Dictionary<int, CodeAnalysis.DbrValue> DbrOverrides { get; private set; }
/// <summary>
/// Full line, possibly multi-line comments.
/// </summary>
public Dictionary<int, MultiLineComment> LongComments { get; private set; }
/// <summary>
/// Notes, which are like comments but not included in the assembled output.
/// </summary>
public SortedList<int, MultiLineComment> Notes { get; private set; }
/// <summary>
/// Labels, defined by the user; uses file offset as key. Ideally the label names
/// are unique, but there are ways around that.
/// </summary>
public Dictionary<int, Symbol> UserLabels { get; private set; }
/// <summary>
/// Local variable tables. Uses file offset as key.
/// </summary>
public SortedList<int, LocalVariableTable> LvTables { get; private set; }
/// <summary>
/// Format descriptors for operands and data items. Uses file offset as key.
/// </summary>
public SortedList<int, FormatDescriptor> OperandFormats { get; private set; }
/// <summary>
/// Visualization sets. Uses file offset as key.
/// </summary>
/// <remarks>
/// TODO(maybe): certain operations must be performed on the set of all visualizations
/// or the set of all animations, requiring a double "foreach" with an "is" clause.
/// It might be simpler and more efficient overall to split this into three lists: one
/// for visualizations (perhaps keyed by serial number), one for animations, and one
/// for VisualizationSet objects (the latter required to establish ordering). The
/// primary argument against is that this makes undo/redo more complicated.
/// </remarks>
public SortedList<int, VisualizationSet> VisualizationSets { get; private set; }
/// <summary>
/// Project properties. Includes CPU type, platform symbol file names, project
/// symbols, etc.
/// </summary>
public ProjectProperties ProjectProps { get; private set; }
/// <summary>
/// "Cooked" form of relocation data (e.g. OmfReloc). This does not contain the file
/// offset, as that's expected to be used as the dictionary key.
/// </summary>
[Serializable]
public class RelocData {
public byte Width; // width of area written by relocator (1-4 bytes)
public sbyte Shift; // amount to shift the value (usually 0 or -16)
public int Value; // value used (unshifted, full width)
public RelocData() { } // for deserialization
public RelocData(byte width, sbyte shift, int value) {
Width = width;
Shift = shift;
Value = value;
}
}
/// <summary>
/// List of relocation data. Will be empty unless file was generated from a
/// relocatable source.
/// </summary>
public Dictionary<int, RelocData> RelocList { get; private set; }
#endregion // data to save & restore
/// <summary>
/// The contents of the 65xx data file.
/// </summary>
public byte[] FileData { get { return mFileData; } }
private byte[] mFileData;
/// <summary>
/// CPU definition to use when analyzing input.
/// </summary>
public CpuDef CpuDef { get; private set; }
/// <summary>
/// If set, changes are ignored.
/// </summary>
public bool IsReadOnly { get; set; }
/// <summary>
/// If true, plugins will execute in the main application's AppDomain instead of
/// the sandbox. Must be set before calling Initialize().
/// </summary>
public bool UseMainAppDomainForPlugins { get; set; }
/// <summary>
/// Full pathname of project file. The directory name is needed when loading
/// platform symbols and extension scripts from the project directory, and the
/// filename is used to give project-local extension scripts unique DLL names.
///
/// For a new project that hasn't been saved yet, this will be empty.
/// </summary>
public string ProjectPathName { get; set; }
// Filename only of data file. This is used for debugging and text export.
public string DataFileName { get; private set; }
// This holds working state for the code and data analyzers. Some of the state
// is presented directly to the user, e.g. status flags. All of the data here
// should be considered transient; it may be discarded at any time without
// causing user data loss.
private Anattrib[] mAnattribs;
// A snapshot of the Anattribs array, taken after code analysis has completed,
// before data analysis has begun.
private Anattrib[] mCodeOnlyAnattribs;
/// <summary>
/// Changes to the Data Bank Register, by offset. These can come from DbrOverrides
/// or be automatically generated.
/// </summary>
public Dictionary<int, CodeAnalysis.DbrValue> DbrChanges { get; private set; }
// Symbol lists loaded from platform symbol files. This is essentially a list
// of lists, of symbols.
private List<PlatformSymbols> PlatformSyms { get; set; }
// Extension script manager. Controls AppDomain sandbox.
private ScriptManager mScriptManager;
// All symbols, including user-defined, platform-specific, and auto-generated, keyed by
// label string. This is rebuilt whenever we do a refresh, and modified whenever
// labels or platform definitions are edited.
//
// Note this includes project/platform symbols that will not be in the assembled output.
public SymbolTable SymbolTable { get; private set; }
// Cross-reference data, indexed by file offset.
private Dictionary<int, XrefSet> mXrefs = new Dictionary<int, XrefSet>();
// Project and platform symbols that are being referenced from code.
public List<DefSymbol> ActiveDefSymbolList { get; private set; }
// List of messages, mostly problems detected during analysis.
public MessageList Messages { get; private set; }
public class CodeDataCounts {
public int CodeByteCount { get; set; }
public int DataByteCount { get; set; }
public int JunkByteCount { get; set; }
public void Reset() {
CodeByteCount = DataByteCount = JunkByteCount = 0;
}
}
public CodeDataCounts ByteCounts { get; private set; } = new CodeDataCounts();
#if DATA_PRESCAN
// Data scan results.
public TypedRangeSet RepeatedBytes { get; private set; }
public RangeSet StdAsciiBytes { get; private set; }
public RangeSet HighAsciiBytes { get; private set; }
#endif
// List of changes for undo/redo.
private List<ChangeSet> mUndoList = new List<ChangeSet>();
// Index of slot where next undo operation will be placed.
private int mUndoTop = 0;
// Index of top when the file was last saved.
private int mUndoSaveIndex = 0;
/// <summary>
/// Constructs a new project.
/// </summary>
public DisasmProject() { }
/// <summary>
/// Prepares the object by instantiating various fields, some of which are sized to
/// match the length of the data file. The data file may not have been loaded yet
/// (e.g. when deserializing a project file).
/// </summary>
public void Initialize(int fileDataLen) {
Debug.Assert(FileDataLength == 0); // i.e. Initialize() hasn't run yet
Debug.Assert(fileDataLen > 0);
FileDataLength = fileDataLen;
ProjectPathName = string.Empty;
AddrMap = new AddressMap(fileDataLen);
AddrMap.Set(0, 0x1000); // default load address to $1000; override later
// Default value is "no hint".
TypeHints = new CodeAnalysis.TypeHint[fileDataLen];
// Default value is "unspecified" for all bits.
StatusFlagOverrides = new StatusFlags[fileDataLen];
Comments = new string[fileDataLen];
// Populate with empty strings so we don't have to worry about null refs.
for (int i = 0; i < Comments.Length; i++) {
Comments[i] = string.Empty;
}
DbrOverrides = new Dictionary<int, CodeAnalysis.DbrValue>();
DbrChanges = new Dictionary<int, CodeAnalysis.DbrValue>();
LongComments = new Dictionary<int, MultiLineComment>();
Notes = new SortedList<int, MultiLineComment>();
UserLabels = new Dictionary<int, Symbol>();
OperandFormats = new SortedList<int, FormatDescriptor>();
LvTables = new SortedList<int, LocalVariableTable>();
VisualizationSets = new SortedList<int, VisualizationSet>();
ProjectProps = new ProjectProperties();
RelocList = new Dictionary<int, RelocData>();
SymbolTable = new SymbolTable();
PlatformSyms = new List<PlatformSymbols>();
ActiveDefSymbolList = new List<DefSymbol>();
Messages = new MessageList();
// Default to 65816. This will be replaced with value from project file or
// system definition.
ProjectProps.CpuType = CpuDef.CpuType.Cpu65816;
ProjectProps.IncludeUndocumentedInstr = false;
ProjectProps.TwoByteBrk = false;
UpdateCpuDef();
}
/// <summary>
/// Discards resources, notably the sandbox AppDomain.
/// </summary>
public void Cleanup() {
Debug.WriteLine("DisasmProject.Cleanup(): scriptMgr=" + mScriptManager);
if (mScriptManager != null) {
mScriptManager.Cleanup();
mScriptManager = null;
}
}
// IDisposable generic finalizer.
~DisasmProject() {
Dispose(false);
}
// IDisposable generic Dispose() implementation.
public void Dispose() {
Dispose(true);
GC.SuppressFinalize(this);
}
/// <summary>
/// Confirms that Cleanup() was called. This is just a behavior check; the
/// destructor is not required for correct behavior.
/// </summary>
protected virtual void Dispose(bool disposing) {
//Debug.WriteLine("DisasmProject Dispose(" + disposing + ")");
Debug.Assert(mScriptManager == null, "DisasmProject.Cleanup was not called");
}
/// <summary>
/// Prepares the DisasmProject for use as a new project.
/// </summary>
/// <param name="fileData">65xx data file contents.</param>
/// <param name="dataFileName">Data file's filename (not pathname). Only used for
/// cosmetic stuff, e.g. exporting to text; not stored in project.</param>
public void PrepForNew(byte[] fileData, string dataFileName) {
Debug.Assert(fileData.Length == FileDataLength);
mFileData = fileData;
DataFileName = dataFileName;
FileDataCrc32 = CommonUtil.CRC32.OnWholeBuffer(0, mFileData);
#if DATA_PRESCAN
ScanFileData();
#endif
// Mark the first byte as code so we have something to do. This may get
// overridden later.
TypeHints[0] = CodeAnalysis.TypeHint.Code;
}
/// <summary>
/// Pulls items of interest out of the system definition object and applies them
/// to the project. Call this after LoadDataFile() for a new project.
/// </summary>
/// <param name="sysDef">Target system definition.</param>
public void ApplySystemDef(SystemDef sysDef) {
CpuDef.CpuType cpuType = CpuDef.GetCpuTypeFromName(sysDef.Cpu);
bool includeUndoc = SystemDefaults.GetUndocumentedOpcodes(sysDef);
bool twoByteBrk = SystemDefaults.GetTwoByteBrk(sysDef);
CpuDef tmpDef = CpuDef.GetBestMatch(cpuType, includeUndoc, twoByteBrk);
// Store the best-matched CPU in properties, rather than whichever was originally
// requested. This way the behavior of the project is the same for everyone, even
// if somebody has a newer app version with specialized handling for the
// originally-specified CPU.
ProjectProps.CpuType = tmpDef.Type;
ProjectProps.IncludeUndocumentedInstr = includeUndoc;
ProjectProps.TwoByteBrk = twoByteBrk;
UpdateCpuDef();
ProjectProps.AnalysisParams.DefaultTextScanMode =
SystemDefaults.GetTextScanMode(sysDef);
ProjectProps.EntryFlags = SystemDefaults.GetEntryFlags(sysDef);
// Configure the load address.
if (SystemDefaults.GetFirstWordIsLoadAddr(sysDef) && mFileData.Length > 2) {
// First two bytes are the load address, code starts at offset +000002. We
// need to put the load address into the stream, but don't want it to get
// picked up as an address for something else. So we set it to the same
// address as the start of the file. The overlapping-address code should do
// the right thing with it.
//
// Updated after adding the "load address" report to the address edit dialog.
// We don't want the two-byte offset.
int loadAddr = RawData.GetWord(mFileData, 0, 2, false);
AddrMap.Set(0, loadAddr - 2);
AddrMap.Set(2, loadAddr);
OperandFormats[0] = FormatDescriptor.Create(2, FormatDescriptor.Type.NumericLE,
FormatDescriptor.SubType.None);
TypeHints[0] = CodeAnalysis.TypeHint.NoHint;
TypeHints[2] = CodeAnalysis.TypeHint.Code;
} else {
int loadAddr = SystemDefaults.GetLoadAddress(sysDef);
AddrMap.Set(0, loadAddr);
}
foreach (string str in sysDef.SymbolFiles) {
ProjectProps.PlatformSymbolFileIdentifiers.Add(str);
}
foreach (string str in sysDef.ExtensionScripts) {
ProjectProps.ExtensionScriptFileIdentifiers.Add(str);
}
}
public void UpdateCpuDef() {
CpuDef = CpuDef.GetBestMatch(ProjectProps.CpuType,
ProjectProps.IncludeUndocumentedInstr, ProjectProps.TwoByteBrk);
}
/// <summary>
/// Sets the file CRC. Called during deserialization.
/// </summary>
/// <param name="crc">Data file CRC.</param>
public void SetFileCrc(uint crc) {
Debug.Assert(FileDataLength > 0);
FileDataCrc32 = crc;
}
/// <summary>
/// Sets the file data array. Used when the project is created from a project file.
/// </summary>
/// <param name="fileData">65xx data file contents.</param>
/// <param name="dataFileName">Data file's filename (not pathname).</param>
/// <param name="report">Reporting object for validation errors.</param>
public void SetFileData(byte[] fileData, string dataFileName, ref FileLoadReport report) {
Debug.Assert(fileData.Length == FileDataLength);
Debug.Assert(CRC32.OnWholeBuffer(0, fileData) == FileDataCrc32);
mFileData = fileData;
DataFileName = dataFileName;
FixAndValidate(ref report);
#if DATA_PRESCAN
ScanFileData();
#endif
}
#if DATA_PRESCAN
private delegate bool ByteTest(byte val); // for ScanFileData()
/// <summary>
/// Scans the contents of the file data array, noting runs of identical bytes and
/// other interesting bits.
///
/// The file data is guaranteed not to change, so doing a bit of work here can save
/// us time during data analysis.
/// </summary>
private void ScanFileData() {
DateTime startWhen = DateTime.Now;
// Find runs of identical bytes.
TypedRangeSet repeats = new TypedRangeSet();
Debug.Assert(mFileData.Length > 0);
byte matchByte = mFileData[0];
int count = 1;
for (int i = 1; i < mFileData.Length; i++) {
if (mFileData[i] == matchByte) {
count++;
continue;
}
if (count >= DataAnalysis.MIN_RUN_LENGTH) {
repeats.AddRange(i - count, i - 1, matchByte);
}
matchByte = mFileData[i];
count = 1;
}
if (count >= DataAnalysis.MIN_RUN_LENGTH) {
repeats.AddRange(mFileData.Length - count, mFileData.Length - 1, matchByte);
}
RangeSet ascii = new RangeSet();
CreateByteRangeSet(ascii, mFileData, DataAnalysis.MIN_STRING_LENGTH,
delegate (byte val) {
return val >= 0x20 && val < 0x7f;
}
);
RangeSet highAscii = new RangeSet();
CreateByteRangeSet(highAscii, mFileData, DataAnalysis.MIN_STRING_LENGTH,
delegate (byte val) {
return val >= 0xa0 && val < 0xff;
}
);
if (false) {
repeats.DebugDump("Repeated-Bytes (" + DataAnalysis.MIN_RUN_LENGTH + "+)");
ascii.DebugDump("Standard-ASCII (" + DataAnalysis.MIN_STRING_LENGTH + "+)");
highAscii.DebugDump("High-ASCII (" + DataAnalysis.MIN_STRING_LENGTH + "+)");
}
Debug.WriteLine("ScanFileData took " +
((DateTime.Now - startWhen).TotalMilliseconds) + " ms");
RepeatedBytes = repeats;
StdAsciiBytes = ascii;
HighAsciiBytes = highAscii;
}
private void CreateByteRangeSet(RangeSet set, byte[] data, int minLen, ByteTest tester) {
int count = 0;
for (int i = 0; i < data.Length; i++) {
if (tester(data[i])) {
count++;
} else if (count < minLen) {
count = 0;
} else {
set.AddRange(i - count, i - 1);
count = 0;
}
}
if (count >= minLen) {
set.AddRange(data.Length - count, data.Length - 1);
}
}
#endif
/// <summary>
/// Walks the list of format descriptors, fixing places where the data doesn't match.
/// This is run once, after the file is loaded.
/// </summary>
private void FixAndValidate(ref FileLoadReport report) {
// Can't modify a list while we're iterating through it, so gather changes here.
Dictionary<int, FormatDescriptor> changes = new Dictionary<int, FormatDescriptor>();
foreach (KeyValuePair<int, FormatDescriptor> kvp in OperandFormats) {
FormatDescriptor dfd = kvp.Value;
// v1 project files specified string layouts as sub-types, and assumed they
// were high or low ASCII. Numeric values could use the ASCII sub-type, which
// included both high and low.
//
// v2 project files changed this to make string layouts types, with the
// character encoding specified in the sub-type. High and low ASCII became
// separate, explicitly specified items.
//
// When loading a v1 file, the old "Ascii" sub-type is deserialized to
// ASCII_GENERIC. Now that we have access to the file data, we need to refine
// the sub-type to high or low.
if (dfd.FormatSubType == FormatDescriptor.SubType.ASCII_GENERIC) {
FormatDescriptor newDfd;
if (dfd.IsString) {
// Determine the string encoding by looking at the first character.
// For some strings (StringL8, StringL16) we need to skip forward a
// byte or two. Empty strings with lengths or null-termination will
// be treated as low ASCII.
int checkOffset = kvp.Key;
if (dfd.FormatType == FormatDescriptor.Type.StringL8 && dfd.Length > 1) {
checkOffset++;
} else if (dfd.FormatType == FormatDescriptor.Type.StringL16 && dfd.Length > 2) {
checkOffset += 2;
}
bool isHigh = (FileData[checkOffset] & 0x80) != 0;
newDfd = FormatDescriptor.Create(dfd.Length, dfd.FormatType,
isHigh ? FormatDescriptor.SubType.HighAscii :
FormatDescriptor.SubType.Ascii);
} else if (dfd.IsNumeric) {
// This is a character constant in an instruction or data operand, such
// as ".dd1 'f'" or "LDA #'f'". Could be multi-byte (even instructions
// can be 16-bit). This is a little awkward, because at this point we
// can't tell the difference between instructions and data.
//
// However, we do know that instructions are always little-endian, that
// opcodes are one byte, that data values > $ff can't be ASCII encoded,
// and that $00 isn't a valid ASCII character. So we can apply the
// following test:
// - if the length is 1, it's data; grab the first byte
// - if it's NumericBE, it's data; grab the last byte
// - if the second byte is $00, it's data; grab the first byte
// - otherwise, it's an instruction; grab the second byte
int checkOffset;
if (dfd.FormatType == FormatDescriptor.Type.NumericBE) {
Debug.Assert(dfd.Length <= FormatDescriptor.MAX_NUMERIC_LEN);
checkOffset = kvp.Key + dfd.Length - 1;
} else if (dfd.Length < 2 || FileData[kvp.Key + 1] == 0x00) {
checkOffset = kvp.Key;
} else {
Debug.Assert(dfd.FormatType == FormatDescriptor.Type.NumericLE);
checkOffset = kvp.Key + 1;
}
bool isHigh = (FileData[checkOffset] & 0x80) != 0;
newDfd = FormatDescriptor.Create(dfd.Length, dfd.FormatType,
isHigh ? FormatDescriptor.SubType.HighAscii :
FormatDescriptor.SubType.Ascii);
} else {
Debug.Assert(false);
newDfd = dfd;
}
changes[kvp.Key] = newDfd;
Debug.WriteLine("Fix +" + kvp.Key.ToString("x6") + ": " +
dfd + " -> " + newDfd);
// possibly interesting, but rarely; very noisy
//report.Add(FileLoadItem.Type.Notice,
// "Fixed format at +" + kvp.Key.ToString("x6"));
}
}
// Run through the list again, this time looking for badly-formed strings. We're
// only checking structure, not character encoding, because you're allowed to have
// non-printable characters in strings.
foreach (KeyValuePair<int, FormatDescriptor> kvp in OperandFormats) {
FormatDescriptor dfd = kvp.Value;
if (dfd.IsString && !DataAnalysis.VerifyStringData(FileData, kvp.Key, dfd.Length,
dfd.FormatType, out string failMsg)) {
report.Add(FileLoadItem.Type.Warning,
"+" + kvp.Key.ToString("x6") + ": " + failMsg);
changes[kvp.Key] = null;
}
}
// Apply changes to main list.
foreach (KeyValuePair<int, FormatDescriptor> kvp in changes) {
if (kvp.Value == null) {
OperandFormats.Remove(kvp.Key);
} else {
OperandFormats[kvp.Key] = kvp.Value;
}
}
}
/// <summary>
/// Loads platform symbol files and extension scripts.
///
/// Call this on initial load and whenever the set of platform symbol files changes
/// in the project config.
///
/// Failures here will be reported to the user but aren't fatal.
/// </summary>
/// <returns>Multi-line string with all warnings from load process.</returns>
public string LoadExternalFiles() {
TaskTimer timer = new TaskTimer();
timer.StartTask("Total");
StringBuilder sb = new StringBuilder();
string projectDir = string.Empty;
if (!string.IsNullOrEmpty(ProjectPathName)) {
projectDir = Path.GetDirectoryName(ProjectPathName);
}
// Load the platform symbols first.
timer.StartTask("Platform Symbols");
PlatformSyms.Clear();
int loadOrdinal = 0;
foreach (string fileIdent in ProjectProps.PlatformSymbolFileIdentifiers) {
PlatformSymbols ps = new PlatformSymbols();
bool ok = ps.LoadFromFile(fileIdent, projectDir, loadOrdinal,
out FileLoadReport report);
if (ok) {
PlatformSyms.Add(ps);
}
if (report.Count > 0) {
sb.Append(report.Format());
}
loadOrdinal++;
}
timer.EndTask("Platform Symbols");
// Instantiate the script manager on first use.
timer.StartTask("Create ScriptManager");
if (mScriptManager == null) {
mScriptManager = new ScriptManager(this);
} else {
mScriptManager.Clear();
}
timer.EndTask("Create ScriptManager");
// Load the extension script files.
timer.StartTask("Load Extension Scripts");
foreach (string fileIdent in ProjectProps.ExtensionScriptFileIdentifiers) {
bool ok = mScriptManager.LoadPlugin(fileIdent, out FileLoadReport report);
if (report.Count > 0) {
sb.Append(report.Format());
}
}
timer.EndTask("Load Extension Scripts");
timer.EndTask("Total");
timer.DumpTimes("Time to load external files:");
return sb.ToString();
}
/// <summary>
/// Checks some stuff. Problems are handled with assertions, so this is only
/// useful in debug builds.
/// </summary>
public void Validate() {
// Confirm that we can walk through the file, stepping directly from the start
// of one thing to the start of the next. We won't normally do this, because
// we need to watch for embedded instructions.
int offset = 0;
while (offset < mFileData.Length) {
Anattrib attr = mAnattribs[offset];
bool thisIsCode = attr.IsInstructionStart;
Debug.Assert(attr.IsStart);
Debug.Assert(attr.Length != 0);
offset += attr.Length;
// Sometimes embedded instructions continue past the "outer" instruction,
// usually because we're misinterpreting the code. We need to deal with
// that here.
//
// One fun way to cause this is to have inline data from a plugin that got
// overwritten by the code analyzer. See test 2022 for an example.
int extraInstrBytes = 0;
while (offset < mFileData.Length && mAnattribs[offset].IsInstruction &&
!mAnattribs[offset].IsInstructionStart) {
extraInstrBytes++;
offset++;
}
// Make sure the extra code bytes were part of an instruction. Otherwise it
// means we moved from the end of a data area to the middle of an instruction,
// which is very bad.
Debug.Assert(extraInstrBytes == 0 || thisIsCode);
//if (extraInstrBytes > 0) { Debug.WriteLine("EIB=" + extraInstrBytes); }
// Max instruction len is 4, so the stray part must be shorter.
Debug.Assert(extraInstrBytes < 4);
}
Debug.Assert(offset == mFileData.Length);
// Confirm that all bytes are tagged as code, data, or inline data. The Asserts
// in Anattrib should confirm that nothing is tagged as more than one thing.
for (offset = 0; offset < mAnattribs.Length; offset++) {
Anattrib attr = mAnattribs[offset];
Debug.Assert(attr.IsInstruction || attr.IsInlineData || attr.IsData);
}
// Confirm that there are no Default format entries in OperandFormats.
foreach (KeyValuePair<int, FormatDescriptor> kvp in OperandFormats) {
Debug.Assert(kvp.Value.FormatType != FormatDescriptor.Type.Default);
Debug.Assert(kvp.Value.FormatType != FormatDescriptor.Type.REMOVE);
}
}
/// <summary>
/// Checks to see if any part of the address map runs across a bank boundary.
/// </summary>
private void ValidateAddressMap() {
foreach (AddressMap.AddressMapEntry entry in AddrMap) {
if ((entry.Addr & 0xff0000) != ((entry.Addr + entry.Length - 1) & 0xff0000)) {
string fmt = Res.Strings.MSG_BANK_OVERRUN_DETAIL_FMT;
int firstNext = (entry.Addr & 0xff0000) + 0x010000;
int badOffset = entry.Offset + (firstNext - entry.Addr);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Error,
entry.Offset,
MessageList.MessageEntry.MessageType.BankOverrun,
string.Format(fmt, "+" + badOffset.ToString("x6")),
MessageList.MessageEntry.ProblemResolution.None));
}
}
}
/// <summary>
/// Checks for hidden visualization sets.
/// </summary>
private void ValidateVisualizationSets() {
foreach (KeyValuePair<int, VisualizationSet> kvp in VisualizationSets) {
Anattrib attr = GetAnattrib(kvp.Key);
if (!attr.IsStart) {
string tag = string.Empty;
if (kvp.Value.Count > 0) {
tag = kvp.Value[0].Tag;
}
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
kvp.Key,
MessageList.MessageEntry.MessageType.HiddenVisualization,
tag,
MessageList.MessageEntry.ProblemResolution.VisualizationIgnored));
}
}
}
#region Analysis
/// <summary>
/// Analyzes the file data. This is the main entry point for code/data analysis.
/// </summary>
/// <param name="reanalysisRequired">How much work to do.</param>
/// <param name="debugLog">Object to send debug output to.</param>
/// <param name="reanalysisTimer">Task timestamp collection object.</param>
public void Analyze(UndoableChange.ReanalysisScope reanalysisRequired,
CommonUtil.DebugLog debugLog, TaskTimer reanalysisTimer) {
// This method doesn't report failures. It succeeds to the best of its ability,
// and handles problems by discarding bad data. The overall philosophy is that
// the program will never generate bad data, and any bad project file contents
// (possibly introduced by hand-editing) are identified at load time, called out
// to the user, and discarded.
//
// We do want to collect the failures so we can present them to the user.
Messages.Clear();
Debug.Assert(reanalysisRequired != UndoableChange.ReanalysisScope.None);
reanalysisTimer.StartTask("DisasmProject.Analyze()");
// Populate the symbol table with platform symbols, in file load order, then
// merge in the project symbols, potentially replacing platform symbols that
// have the same label. This version of the table is passed to plugins during
// code analysis.
reanalysisTimer.StartTask("SymbolTable init");
SymbolTable.Clear();
MergePlatformProjectSymbols();
// Merge user labels into the symbol table, overwriting platform/project symbols
// where they conflict. Labels whose values are out of sync (because of a change
// to the address map) are updated as part of this.
UpdateAndMergeUserLabels();
reanalysisTimer.EndTask("SymbolTable init");
if (reanalysisRequired == UndoableChange.ReanalysisScope.CodeAndData) {
// Always want to start with a blank array. Going to be lazy and let the
// system allocator handle that for us.
// NOTE: don't generate any Messages during code analysis -- we clear the
// list at the start of each pass, and we don't always analyze code.
mAnattribs = new Anattrib[mFileData.Length];
reanalysisTimer.StartTask("CodeAnalysis.Analyze");
CodeAnalysis ca = new CodeAnalysis(mFileData, CpuDef, mAnattribs, AddrMap,
TypeHints, StatusFlagOverrides, ProjectProps.EntryFlags,
ProjectProps.AnalysisParams, mScriptManager, debugLog);
ca.Analyze();
reanalysisTimer.EndTask("CodeAnalysis.Analyze");
if (!CpuDef.HasAddr16) {
// 24-bit address space, so DBR matters
reanalysisTimer.StartTask("CodeAnalysis.ApplyDataBankRegister");
ca.ApplyDataBankRegister(DbrOverrides, DbrChanges);
reanalysisTimer.EndTask("CodeAnalysis.ApplyDataBankRegister");
}
// Save a copy of the current state.
mCodeOnlyAnattribs = new Anattrib[mAnattribs.Length];
Array.Copy(mAnattribs, mCodeOnlyAnattribs, mAnattribs.Length);
} else {
// Load Anattribs array from the stored copy.
Debug.WriteLine("Partial reanalysis");
reanalysisTimer.StartTask("CodeAnalysis (restore prev)");
Debug.Assert(mCodeOnlyAnattribs != null);
Array.Copy(mCodeOnlyAnattribs, mAnattribs, mAnattribs.Length);
reanalysisTimer.EndTask("CodeAnalysis (restore prev)");
}
reanalysisTimer.StartTask("Apply labels, formats, etc.");
// Apply any user-defined labels to the Anattribs array.
ApplyUserLabels(debugLog);
// Apply user-created format descriptors to instructions and data items.
ApplyFormatDescriptors(debugLog);
reanalysisTimer.EndTask("Apply labels, formats, etc.");
reanalysisTimer.StartTask("DataAnalysis");
DataAnalysis da = new DataAnalysis(this, mAnattribs);
da.DebugLog = debugLog;
// Convert references to addresses into references to labels, generating labels
// as needed.
reanalysisTimer.StartTask("DataAnalysis.AnalyzeDataTargets");
da.AnalyzeDataTargets();
reanalysisTimer.EndTask("DataAnalysis.AnalyzeDataTargets");
// Analyze uncategorized regions. When this completes, the Anattrib array will
// be complete for every offset, and the file will be traversible by walking
// through the lengths of each entry.
reanalysisTimer.StartTask("DataAnalysis.AnalyzeUncategorized");
da.AnalyzeUncategorized();
reanalysisTimer.EndTask("DataAnalysis.AnalyzeUncategorized");
reanalysisTimer.EndTask("DataAnalysis");
reanalysisTimer.StartTask("RemoveHiddenLabels");
RemoveHiddenLabels();
reanalysisTimer.EndTask("RemoveHiddenLabels");
// ----------
// NOTE: we could add an additional re-analysis entry point here, that just deals with
// platform symbols and xrefs, to be used after a change to project symbols. We'd
// need to check all existing refs to confirm that the symbol hasn't been removed.
// Symbol updates are sufficiently infrequent that this probably isn't worthwhile.
reanalysisTimer.StartTask("GenerateVariableRefs");
// Generate references to variables.
GenerateVariableRefs();
reanalysisTimer.EndTask("GenerateVariableRefs");
// NOTE: we could at this point apply platform address symbols as code labels, so
// that locations in the code that correspond to well-known addresses would pick
// up the appropriate label instead of getting auto-labeled. It's unclear
// whether this is desirable, especially if the user is planning to modify the
// output later on, and it could mess things up if we start slapping
// labels into the middle of data regions. It's generally safer to treat
// platform symbols as labels for constants and external references. If somebody
// finds an important use case we can revisit this; might merit a special type
// of equate or section in the platform symbol definition file.
reanalysisTimer.StartTask("GeneratePlatformSymbolRefs");
// Generate references to platform and project external symbols.
GeneratePlatformSymbolRefs();
reanalysisTimer.EndTask("GeneratePlatformSymbolRefs");
reanalysisTimer.StartTask("GenerateXrefs");
// Generate cross-reference lists.
mXrefs.Clear();
GenerateXrefs();
reanalysisTimer.EndTask("GenerateXrefs");
// replace simple auto-labels ("L1234") with annotated versions ("WR_1234")
if (ProjectProps.AutoLabelStyle != AutoLabel.Style.Simple) {
reanalysisTimer.StartTask("AnnotateAutoLabels");
AnnotateAutoLabels();
reanalysisTimer.EndTask("AnnotateAutoLabels");
}
reanalysisTimer.StartTask("GenerateActiveDefSymbolList");
// Generate the list of project/platform symbols that are being used. This forms
// the list of EQUates at the top of the file. The active set is identified from
// the cross-reference data.
GenerateActiveDefSymbolList();
reanalysisTimer.EndTask("GenerateActiveDefSymbolList");
#if DEBUG
reanalysisTimer.StartTask("Validate");
Validate();
reanalysisTimer.EndTask("Validate");
#endif
reanalysisTimer.StartTask("ErrorCheck");
ValidateAddressMap();
ValidateVisualizationSets();
reanalysisTimer.EndTask("ErrorCheck");
reanalysisTimer.EndTask("DisasmProject.Analyze()");
//reanalysisTimer.DumpTimes("DisasmProject timers:", debugLog);
debugLog.LogI("Analysis complete");
//Problems.DebugDump();
Debug.WriteLine(SymbolTable.ToString());
}
/// <summary>
/// Applies user labels to the Anattribs array. Symbols with stale Value fields will
/// be replaced.
/// </summary>
/// <param name="genLog">Log for debug messages.</param>
private void ApplyUserLabels(DebugLog genLog) {
foreach (KeyValuePair<int, Symbol> kvp in UserLabels) {
int offset = kvp.Key;
if (offset < 0 || offset >= mAnattribs.Length) {
genLog.LogE("Invalid offset +" + offset.ToString("x6") +
"(label=" + kvp.Value.Label + ")");
continue; // ignore this
}
if (mAnattribs[offset].Symbol != null) {
genLog.LogW("Multiple labels at offset +" + offset.ToString("x6") +
": " + kvp.Value.Label + " / " + mAnattribs[offset].Symbol.Label);
continue;
}
int expectedAddr = kvp.Value.Value;
Debug.Assert(expectedAddr == AddrMap.OffsetToAddress(offset));
// Add direct reference to the UserLabels Symbol object.
mAnattribs[offset].Symbol = kvp.Value;
}
}
/// <summary>
/// Applies user-defined format descriptors to the Anattribs array. This specifies the
/// format for instruction operands, and identifies data items.
/// </summary>
/// <remarks>
/// In an ideal world, this would be a trivial function. In practice it's possible for
/// all sorts of weird edge cases to arise, e.g. if you hint something as data, apply
/// formats, and then hint it as code, many strange things are possible. We don't want
/// to delete user data if it seems out of place, but we do want to ignore anything
/// that's going to confuse the source generator later on.
///
/// Problem reports are written to a log (which is shown by the Analyzer Output
/// window) and the Problems list. Once the latter is better established we can
/// stop sending them to the log.
/// </remarks>
/// <param name="genLog">Log for debug messages.</param>
private void ApplyFormatDescriptors(DebugLog genLog) {
genLog.LogI("Applying format descriptors");
// TODO(someday): move error format strings to string dictionary
foreach (KeyValuePair<int, FormatDescriptor> kvp in OperandFormats) {
int offset = kvp.Key;
FormatDescriptor dfd = kvp.Value;
// Check offset.
if (offset < 0 || offset >= mFileData.Length) {
string msg = "invalid offset (desc=" + dfd + ")";
genLog.LogE("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Error,
offset,
MessageList.MessageEntry.MessageType.InvalidOffsetOrLength,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
Debug.Assert(false);
continue;
}
// Make sure it doesn't run off the end
if (offset + dfd.Length > mFileData.Length) {
string msg = "invalid offset+len: len=" + dfd.Length +
" file=" + mFileData.Length;
genLog.LogE("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Error,
offset,
MessageList.MessageEntry.MessageType.InvalidOffsetOrLength,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
Debug.Assert(false);
continue;
}
if (!AddrMap.IsSingleAddrRange(offset, dfd.Length)) {
string msg = "descriptor straddles address change; len=" + dfd.Length;
genLog.LogE("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.InvalidOffsetOrLength,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
continue;
}
if (mAnattribs[offset].IsInstructionStart) {
// Check length for instruction formatters. This can happen if you format
// a bunch of bytes as single-byte data items and then add a code entry
// point.
if (dfd.Length != mAnattribs[offset].Length) {
string msg = "unexpected length on instr format descriptor (" +
dfd.Length + " vs " + mAnattribs[offset].Length + ")";
genLog.LogW("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.InvalidOffsetOrLength,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
continue;
}
if (dfd.Length == 1) {
// No operand to format!
string msg = "unexpected format descriptor on single-byte op";
genLog.LogW("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.InvalidDescriptor,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
continue;
}
if (!dfd.IsValidForInstruction) {
string msg = "descriptor not valid for instruction: " + dfd;
genLog.LogW("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.InvalidDescriptor,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
continue;
}
} else if (mAnattribs[offset].IsInstruction) {
// Mid-instruction format.
string msg = "unexpected mid-instruction format descriptor";
genLog.LogW("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.InvalidDescriptor,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
continue;
} else {
// Data or inline data. The data analyzer hasn't run yet. We want to
// confirm that the descriptor doesn't overlap with code.
//
// Data descriptors that overlap code are problematic, for two reasons.
// First, we end up with references to hidden labels, because the code that
// tries to prevent it sees an Anattrib with code at the target address and
// assumes all is well. Second, if the overlap ends partway into an
// instruction, an Anattrib-walker will move from a data region to the middle
// of an instruction, which should never happen.
//
// All instruction bytes have been marked, so we just need to confirm that
// none of the bytes spanned by this descriptor are instructions.
bool overlap = false;
for (int i = offset; i < offset + dfd.Length; i++) {
if (mAnattribs[i].IsInstruction) {
string msg =
"data format descriptor overlaps code at +" + i.ToString("x6");
genLog.LogW("+" + offset.ToString("x6") + ": " + msg);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.InvalidDescriptor,
msg,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
overlap = true;
break;
}
}
if (overlap) {
continue;
}
#if false
// Check junk+align directive. We don't outright reject the descriptor,
// because it still works as junk+unalign, but we want to add a warning
// message.
//
// NOTE: currently disabled because some relevant changes, such as editing
// a format descriptor sub-type, don't cause data re-analysis. I don't think
// this is important enough to special-case or implement elsewhere.
if (dfd.IsAlignedJunk) {
if (!AsmGen.GenCommon.CheckJunkAlign(offset, dfd, AddrMap)) {
string msg = "junk alignment not valid";
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Info,
offset,
MessageList.MessageEntry.MessageType.InvalidDescriptor,
msg,
MessageList.MessageEntry.ProblemResolution.None));
}
}
#endif
}
// All tests passed. Apply the descriptor.
mAnattribs[offset].DataDescriptor = dfd;
}
}
/// <summary>
/// Merges symbols from PlatformSymbols and ProjectSymbols into SymbolTable.
///
/// This should be done before any other symbol assignment or generation, so that user
/// labels take precedence (by virtue of overwriting the earlier platform symbols),
/// and auto label generation can propery generate a unique label.
///
/// Within platform symbol loading, later symbols should replace earlier symbols,
/// so that ordering of platform files behaves in an intuitive fashion.
/// </summary>
private void MergePlatformProjectSymbols() {
// Start by pulling in the platform symbols. The list in PlatformSymbols is in
// order, so we can just overwrite earlier symbols with matching labels.
foreach (PlatformSymbols ps in PlatformSyms) {
foreach (Symbol sym in ps) {
if (sym.Value == PlatformSymbols.ERASE_VALUE) {
// "erase" value
if (SymbolTable.TryGetValue(sym.Label, out Symbol found)) {
SymbolTable.Remove(found);
}
} else {
// overwrite
SymbolTable[sym.Label] = sym;
}
}
}
// Now add project symbols, overwriting platform symbols with the same label.
foreach (KeyValuePair<string, DefSymbol> kvp in ProjectProps.ProjectSyms) {
SymbolTable[kvp.Value.Label] = kvp.Value;
}
}
/// <summary>
/// Returns true if a symbol with a matching label appears in the project symbols
/// or any of the platform lists. This operates on the raw lists, not SymbolTable.
/// </summary>
/// <remarks>
/// Useful for determining whether a label masks a project or platform symbol.
/// </remarks>
private bool IsInProjectOrPlatformList(Symbol sym) {
if (sym == null) {
return false;
}
foreach (PlatformSymbols ps in PlatformSyms) {
if (ps.ContainsKey(sym.Label)) {
return true;
}
}
if (ProjectProps.ProjectSyms.ContainsKey(sym.Label)) {
return true;
}
return false;
}
/// <summary>
/// Merges symbols from UserLabels into SymbolTable. Existing entries with matching
/// labels will be replaced.
/// </summary>
/// <remarks>
/// It might make sense to exclude non-unique labels, but that's probably better done
/// with a UI filter option.
/// </remarks>
private void UpdateAndMergeUserLabels() {
// We store symbols as label+value, but for a user label the actual value is
// the address of the offset the label is associated with, which can change if
// the user updates the address map. It's convenient to store labels as Symbols
// because we also want the Type value, and it avoids having to create Symbol
// objects on the fly. If the value in the user label is wrong, we fix it here.
Dictionary<int, Symbol> changes = new Dictionary<int, Symbol>();
foreach (KeyValuePair<int, Symbol> kvp in UserLabels) {
int offset = kvp.Key;
Symbol sym = kvp.Value;
int expectedAddr = AddrMap.OffsetToAddress(offset);
if (sym.Value != expectedAddr) {
Symbol newSym = sym.UpdateValue(expectedAddr);
Debug.WriteLine("Updating label value: " + sym + " --> " + newSym);
changes[offset] = newSym;
sym = newSym;
}
SymbolTable[kvp.Value.Label] = sym;
}
// If we updated any symbols, merge the changes back into UserLabels.
if (changes.Count != 0) {
Debug.WriteLine("...merging " + changes.Count + " symbols into UserLabels");
}
foreach (KeyValuePair<int, Symbol> kvp in changes) {
UserLabels[kvp.Key] = kvp.Value;
}
}
/// <summary>
/// Removes user labels from the symbol table if they're in the middle of an
/// instruction or multi-byte data area. (Easy way to cause this: hint a 3-byte
/// instruction as data, add a label to the middle byte, remove hints.)
///
/// Call this after the code and data analysis passes have completed. Any
/// references to the hidden labels will just fall through. It will be possible
/// to create multiple labels with the same name, because the app won't see them
/// in the symbol table.
/// </summary>
private void RemoveHiddenLabels() {
// TODO(someday): keep the symbols in the symbol table so we can't create a
// duplicate, but flag it as hidden. The symbol resolver will need to know
// to ignore it. Provide a way for users to purge them. We could just blow
// them out of UserLabels right now, but I'm trying to avoid discarding user-
// created data without permission.
foreach (KeyValuePair<int, Symbol> kvp in UserLabels) {
int offset = kvp.Key;
if (!mAnattribs[offset].IsStart) {
Debug.WriteLine("Stripping hidden label '" + kvp.Value.Label + "'");
SymbolTable.Remove(kvp.Value);
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.HiddenLabel,
kvp.Value.Label,
MessageList.MessageEntry.ProblemResolution.LabelIgnored));
}
}
}
/// <summary>
/// Generates references to symbols in the local variable tables.
///
/// These only apply to instructions with a specific set of addressing modes.
///
/// This must be called after the code and data analysis passes have completed. It
/// should run before project/platform symbol references are generated, since we want
/// variables to take precedence.
///
/// This also adds all symbols in non-hidden variable tables to the main SymbolTable,
/// for the benefit of future uniqueness checks.
/// </summary>
private void GenerateVariableRefs() {
LocalVariableLookup lvLookup = new LocalVariableLookup(LvTables, this,
null, false, false);
for (int offset = 0; offset < FileData.Length; ) {
// Was a table defined at this offset?
List<DefSymbol> vars = lvLookup.GetVariablesDefinedAtOffset(offset);
if (vars != null) {
// All entries also get added to the main SymbolTable. This is a little
// wonky because the symbol might already exist with a different value.
// So long as the previous thing was also a variable, it doesn't matter.
foreach (DefSymbol defSym in vars) {
if (!SymbolTable.TryGetValue(defSym.Label, out Symbol sym)) {
// Symbol not yet in symbol table. Add it.
//
// NOTE: if you try to run the main app with uniqification enabled,
// this will cause the various uniquified forms of local variables
// to end up in the main symbol table. This can cause clashes with
// user labels that would not occur otherwise.
SymbolTable[defSym.Label] = defSym;
} else if (!sym.IsVariable) {
// Somehow we have a variable and a non-variable with the same
// name. Platform/project symbols haven't been processed yet, so
// this must be a clash with a user label. This could cause
// assembly source gen to fail later on. It's possible to do this
// by "hiding" a table and then adding a user label, so we can't just
// fix it at project load time.
//
// This is now handled by the LvLookup code, which renames the
// duplicate label, so we shouldn't get here.
Debug.WriteLine("Found non-variable with var name in symbol table: "
+ sym);
Debug.Assert(false);
}
}
} else if (LvTables.TryGetValue(offset, out LocalVariableTable unused)) {
// table was ignored
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Warning,
offset,
MessageList.MessageEntry.MessageType.HiddenLocalVariableTable,
string.Empty,
MessageList.MessageEntry.ProblemResolution.LocalVariableTableIgnored));
}
Anattrib attr = mAnattribs[offset];
if (attr.IsInstructionStart && attr.DataDescriptor == null) {
OpDef op = CpuDef.GetOpDef(FileData[offset]);
DefSymbol defSym = null;
if (op.IsDirectPageInstruction) {
Debug.Assert(attr.OperandAddress == FileData[offset + 1]);
defSym = lvLookup.GetSymbol(offset, FileData[offset + 1],
Symbol.Type.ExternalAddr);
} else if (op.IsStackRelInstruction) {
defSym = lvLookup.GetSymbol(offset, FileData[offset + 1],
Symbol.Type.Constant);
}
if (defSym != null) {
WeakSymbolRef vref = new WeakSymbolRef(defSym.Label,
WeakSymbolRef.Part.Low, op.IsStackRelInstruction ?
WeakSymbolRef.LocalVariableType.StackRelConst :
WeakSymbolRef.LocalVariableType.DpAddr);
mAnattribs[offset].DataDescriptor =
FormatDescriptor.Create(attr.Length, vref, false);
}
}
if (attr.IsDataStart || attr.IsInlineDataStart) {
offset += attr.Length;
} else {
// Advance by one, not attr.Length, so we don't miss embedded instructions.
offset++;
}
}
}
/// <summary>
/// Generates references to symbols in the project/platform symbol tables.
///
/// For each instruction or data item that appears to reference an address, and
/// does not have a target offset, look for a matching address in the symbol tables.
///
/// This works pretty well for addresses, but is a little rough for constants.
///
/// Call this after the code and data analysis passes have completed. This doesn't
/// interact with labels, so the ordering there doesn't matter. This should come after
/// local variable resolution, so that those have priority.
/// </summary>
private void GeneratePlatformSymbolRefs() {
bool checkNearby = ProjectProps.AnalysisParams.SeekNearbyTargets;
for (int offset = 0; offset < mAnattribs.Length; ) {
Anattrib attr = mAnattribs[offset];
Symbol sym;
int address;
OpDef.MemoryEffect accType = OpDef.MemoryEffect.Unknown;
if (attr.IsInstructionStart && attr.DataDescriptor == null &&
attr.OperandAddress >= 0 && attr.OperandOffset < 0) {
// This is an instruction that hasn't been explicitly formatted. It
// has an operand address, but not an offset, meaning it's a reference
// to an address outside the scope of the file. See if it has a
// platform symbol definition.
//
// It might seem unwise to examine the full symbol table, because it has
// non-project non-platform symbols in it. However, any matching user
// labels would have been applied already. Also, we want to ensure that
// conflicting user labels take precedence, e.g. creating a user label "COUT"
// will prevent a platform symbol with the same name from being visible.
// Using the full symbol table is potentially a tad less efficient than
// looking for a match exclusively in project/platform symbols, but it's
// the correct thing to do.
OpDef op = CpuDef.GetOpDef(FileData[offset]);
accType = op.MemEffect;
address = attr.OperandAddress;
sym = SymbolTable.FindNonVariableByAddress(address, accType);
} else if ((attr.IsDataStart || attr.IsInlineDataStart) &&
attr.DataDescriptor != null && attr.DataDescriptor.IsNumeric &&
attr.DataDescriptor.FormatSubType == FormatDescriptor.SubType.Address) {
// Found a Numeric/Address data item that matches. Data items don't have
// OperandAddress or OperandOffset set, so we need to check manually to
// see if the address falls within the project. In most situations this
// isn't really necessary, because the data analysis pass will have resolved
// interal references to auto-generated labels.
//
// This is only firing if the item is explicitly formatted as an
// Address, so we're essentially "upgrading" the user format.
address = RawData.GetWord(mFileData, offset, attr.DataDescriptor.Length,
attr.DataDescriptor.FormatType == FormatDescriptor.Type.NumericBE);
if (AddrMap.AddressToOffset(offset, address) < 0) {
accType = OpDef.MemoryEffect.ReadModifyWrite; // guess
sym = SymbolTable.FindNonVariableByAddress(address, accType);
} else {
Debug.WriteLine("Found unhandled internal data addr ref at +" +
offset.ToString("x6"));
address = -1; // don't touch interior stuff
sym = null;
}
} else {
address = -1;
sym = null;
}
if (address >= 0) {
// If we didn't find it, see if addr+1 has a label. Sometimes indexed
// addressing will use "STA addr-1,y". This will also catch "STA addr-1"
// when addr is the very start of a segment, which means we're actually
// finding a label reference rather than project/platform symbol; only
// works if the location already has a label.
//
// Don't do this for zero-page locations, because those are usually
// individual variables that aren't accessed via addr-1. There are
// exceptions, but more often than not it's just distracting.
if (sym == null && checkNearby && (address & 0xffff) < 0xffff &&
address > 0x0000ff) {
sym = SymbolTable.FindNonVariableByAddress(address + 1, accType);
if (sym != null && sym.SymbolSource != Symbol.Source.Project &&
sym.SymbolSource != Symbol.Source.Platform) {
Debug.WriteLine("Applying non-platform in GeneratePlatform: " + sym);
// should be okay to do this
}
}
// If we found something, and it's not a variable, create a descriptor.
if (sym != null && !sym.IsVariable) {
mAnattribs[offset].DataDescriptor =
FormatDescriptor.Create(mAnattribs[offset].Length,
new WeakSymbolRef(sym.Label, WeakSymbolRef.Part.Low), false);
}
}
if (attr.IsDataStart || attr.IsInlineDataStart) {
offset += attr.Length;
} else {
// Advance by one, not attr.Length, so we don't miss embedded instructions.
offset++;
}
}
}
/// <summary>
/// Generates labels for branch and data targets, and xref lists for all referenced
/// offsets. Also generates Xref entries for DefSymbols (for .eq directives).
///
/// Call this after the code and data analysis passes have completed.
/// </summary>
private void GenerateXrefs() {
// Xref generation. There are two general categories of references:
// (1) Numeric reference. Comes from instructions (e.g. "LDA $1000" or "BRA $1000")
// and Numeric/Address data items.
// (2) Symbolic reference. Comes from instructions and data with Symbol format
// descriptors. In some cases this may be a partial ref, e.g. "LDA #>label".
// The symbol's value may not match the operand, in which case an adjustment
// is applied.
//
// We want to tag both. So if "LDA $1000" becomes "LDA label-2", we want to
// add a numeric reference to the code at $1000, and a symbolic reference to the
// labe at $1002, that point back to the LDA instruction. These are presented
// slightly differently to the user. For a symbolic reference with no adjustment,
// we don't add the (redundant) numeric reference.
//
// In some cases the numeric reference will land in the middle of an instruction
// or multi-byte data area and won't be visible.
// Clear previous cross-reference data from project/platform symbols. These
// symbols don't have file offsets, so we can't store them in the main mXrefs
// list.
// TODO(someday): DefSymbol is otherwise immutable. We should put these elsewhere,
// maybe a Dictionary<DefSymbol, XrefSet>? Just mind the garbage collection.
foreach (Symbol sym in SymbolTable) {
if (sym is DefSymbol) {
(sym as DefSymbol).Xrefs.Clear();
}
}
// TODO: seriously, put the XrefSet ref somewhere else
foreach (LocalVariableTable lvt in LvTables.Values) {
for (int i = 0; i < lvt.Count; i++) {
lvt[i].Xrefs.Clear();
}
}
// Create a mapping from label (which must be unique) to file offset. This
// is different from UserLabels (which only has user-created labels, and is
// sorted by offset) and SymbolTable (which has constants and platform symbols,
// and uses the address as value rather than the offset).
SortedList<string, int> labelList = new SortedList<string, int>(mFileData.Length,
Asm65.Label.LABEL_COMPARER);
for (int offset = 0; offset < mAnattribs.Length; offset++) {
Anattrib attr = mAnattribs[offset];
if (attr.Symbol != null) {
try {
labelList.Add(attr.Symbol.Label, offset);
} catch (ArgumentException ex) {
// Duplicate UserLabel entries are stripped when projects are loaded,
// but it might be possible to cause this by hiding/unhiding a
// label (e.g. using hints to place it in the middle of an instruction).
// Just ignore the duplicate.
Debug.WriteLine("Xref ignoring duplicate label '" + attr.Symbol.Label +
"': " + ex.Message);
}
}
}
// No particular reason to do this here, but it's convenient.
ByteCounts.Reset();
LocalVariableLookup lvLookup = new LocalVariableLookup(LvTables, this,
null, false, false);
// Walk through the Anattrib array, adding xref entries to things referenced
// by the entity at the current offset.
for (int offset = 0; offset < mAnattribs.Length; ) {
Anattrib attr = mAnattribs[offset];
XrefSet.XrefType xrefType = XrefSet.XrefType.Unknown;
OpDef.MemoryEffect accType = OpDef.MemoryEffect.Unknown;
XrefSet.Xref.AccessFlags accessFlags = XrefSet.Xref.AccessFlags.None;
if (attr.IsInstruction) {
OpDef op = CpuDef.GetOpDef(FileData[offset]);
if (op.IsSubroutineCall) {
xrefType = XrefSet.XrefType.SubCallOp;
} else if (op.IsBranchOrSubCall) {
xrefType = XrefSet.XrefType.BranchOp;
} else {
xrefType = XrefSet.XrefType.MemAccessOp;
accType = op.MemEffect;
}
if (op.IsIndexedAccessInstruction) {
accessFlags |= XrefSet.Xref.AccessFlags.Indexed;
}
if (op.IsPointerAccessInstruction) {
accessFlags |= XrefSet.Xref.AccessFlags.Pointer;
}
} else if (attr.IsData || attr.IsInlineData) {
xrefType = XrefSet.XrefType.RefFromData;
}
bool hasZeroOffsetSym = false;
if (attr.DataDescriptor != null) {
FormatDescriptor dfd = attr.DataDescriptor;
if (dfd.FormatSubType == FormatDescriptor.SubType.Symbol) {
// For instructions with address operands that resolve in-file, grab
// the target offset.
int operandOffset = -1;
if (attr.IsInstructionStart) {
operandOffset = attr.OperandOffset;
}
// Is this a reference to a label?
if (labelList.TryGetValue(dfd.SymbolRef.Label, out int symOffset)) {
// Compute adjustment.
int adj = 0;
if (operandOffset >= 0) {
// We can compute (symOffset - operandOffset), but that gives us
// the offset adjustment, not the address adjustment.
adj = mAnattribs[symOffset].Address -
mAnattribs[operandOffset].Address;
}
AddXref(symOffset, new XrefSet.Xref(offset, true, xrefType, accType,
accessFlags, adj));
if (adj == 0) {
hasZeroOffsetSym = true;
}
} else if (dfd.SymbolRef.IsVariable) {
DefSymbol defSym = lvLookup.GetSymbol(offset, dfd.SymbolRef);
if (defSym != null) {
int adj = 0;
if (operandOffset >= 0) {
adj = defSym.Value - operandOffset;
}
defSym.Xrefs.Add(new XrefSet.Xref(offset, true, xrefType, accType,
accessFlags, adj));
}
} else if (SymbolTable.TryGetValue(dfd.SymbolRef.Label, out Symbol sym)) {
// Is this a reference to a project/platform symbol?
if (sym.SymbolSource == Symbol.Source.Project ||
sym.SymbolSource == Symbol.Source.Platform) {
DefSymbol defSym = sym as DefSymbol;
int adj = 0;
// NOTE: operandOffset may be valid, since you are allowed to
// define project symbols for addresses inside the file. I
// don't think we need to fiddle with that though.
//Debug.Assert(operandOffset < 0);
if (sym.SymbolType != Symbol.Type.Constant &&
attr.OperandAddress >= 0) {
// It's an address operand, so we can compute the offset.
adj = defSym.Value - attr.OperandAddress;
} else {
// We could compute the operand's value and display
// the difference, so "LDA #$00" --> "LDA #FOO-1" when
// FOO is 1 would display "FOO -1" in the xref table.
// Not sure if that's useful.
//
// We would need to shift the value to match the part,
// e.g. "LDA #>BLAH" would grab the high part. We'd need
// to tweak the adjustment math appropriately.
}
defSym.Xrefs.Add(new XrefSet.Xref(offset, true, xrefType, accType,
accessFlags, adj));
} else {
// Can get here if somebody creates an address operand symbol
// that refers to a local variable.
Debug.WriteLine("NOTE: not xrefing +" + offset.ToString("x6") +
" " + sym);
}
} else {
// Reference to non-existent symbol.
Messages.Add(new MessageList.MessageEntry(
MessageList.MessageEntry.SeverityLevel.Info,
offset,
MessageList.MessageEntry.MessageType.UnresolvedWeakRef,
dfd.SymbolRef.Label,
MessageList.MessageEntry.ProblemResolution.FormatDescriptorIgnored));
}
} else if (dfd.FormatSubType == FormatDescriptor.SubType.Address) {
// not expecting this format on an instruction operand
Debug.Assert(attr.IsData || attr.IsInlineData);
// This generally doesn't happen for internal addresses, because
// we create an auto label for the target address, and a weak ref
// to the auto label, which means the xref is handled by the symbol
// code above. This case really only happens for external addresses,
// which either have a label (because we defined a symbol) and got
// handled earlier, or don't have a label and aren't useful for a
// cross-reference.
//
// There might be a case I'm missing, so I'm going to take a swing
// at it and spit out a debug message either way.
int operandAddr = RawData.GetWord(mFileData, offset,
dfd.Length, dfd.FormatType == FormatDescriptor.Type.NumericBE);
int targetOffset = AddrMap.AddressToOffset(offset, operandAddr);
if (targetOffset < 0) {
Debug.WriteLine("No xref for addr $" + operandAddr.ToString("x4") +
" at +" + offset.ToString("x6"));
} else {
Debug.WriteLine("HEY: found unlabeled addr ref at +" +
offset.ToString("x6"));
AddXref(targetOffset, new XrefSet.Xref(offset, false, xrefType,
accType, accessFlags, 0));
}
}
// Look for instruction offset references. We skip this if we've already
// added a reference from a symbol with zero adjustment, since that would
// just leave a duplicate entry. (The symbolic ref wins because we need
// it for the label localizer and possibly the label refactorer.)
if (!hasZeroOffsetSym && attr.IsInstructionStart && attr.OperandOffset >= 0) {
AddXref(attr.OperandOffset, new XrefSet.Xref(offset, false, xrefType,
accType, accessFlags, 0));
}
}
if (attr.IsDataStart || attr.IsInlineDataStart) {
// There shouldn't be data items inside of other data items.
offset += attr.Length;
if (attr.DataDescriptor != null &&
attr.DataDescriptor.FormatType == FormatDescriptor.Type.Junk) {
ByteCounts.JunkByteCount += attr.Length;
} else {
ByteCounts.DataByteCount += attr.Length;
}
} else {
// Advance by one, not attr.Length, so we don't miss embedded instructions.
offset++;
ByteCounts.CodeByteCount++;
}
}
}
/// <summary>
/// Adds an Xref entry to an XrefSet in mXrefs. The XrefSet will be created if necessary.
/// </summary>
/// <param name="offset">File offset for which cross-references are being noted.</param>
/// <param name="xref">Cross reference to add to the set.</param>
private void AddXref(int offset, XrefSet.Xref xref) {
if (!mXrefs.TryGetValue(offset, out XrefSet xset)) {
xset = mXrefs[offset] = new XrefSet();
}
xset.Add(xref);
}
/// <summary>
/// Returns the XrefSet for the specified offset. May return null if the set is
/// empty.
/// </summary>
public XrefSet GetXrefSet(int offset) {
mXrefs.TryGetValue(offset, out XrefSet xset);
return xset; // will be null if not found
}
/// <summary>
/// Replaces generic auto-labels with fancier versions generated from xrefs.
/// </summary>
private void AnnotateAutoLabels() {
AutoLabel.Style style = ProjectProps.AutoLabelStyle;
Debug.Assert(style != AutoLabel.Style.Simple);
// We don't have a list of auto labels, so just pick them out of anattribs.
for (int offset = 0; offset < mAnattribs.Length; offset++) {
Anattrib attr = mAnattribs[offset];
if (attr.Symbol != null && attr.Symbol.SymbolSource == Symbol.Source.Auto) {
XrefSet xset = GetXrefSet(offset);
if (xset == null) {
// Nothing useful to do here. This is unexpected, since auto-labels
// should only exist because something referenced the offset.
continue;
}
Symbol newSym =
AutoLabel.GenerateAnnotatedLabel(attr.Address, SymbolTable, xset, style);
if (!newSym.Equals(attr.Symbol)) {
//Debug.WriteLine("Replace " + attr.Symbol.Label + " with " +newSym.Label);
// Replace the symbol in Anattribs, update the symbol table, then
// call Refactor to update everything that referenced it.
Symbol oldSym = mAnattribs[offset].Symbol;
mAnattribs[offset].Symbol = newSym;
SymbolTable.Remove(oldSym);
SymbolTable.Add(newSym);
RefactorLabel(offset, oldSym.Label, out bool unused);
}
}
}
}
/// <summary>
/// Generates the list of project/platform symbols that are being used. Any
/// DefSymbol with a non-empty Xrefs is included. Previous contents are cleared.
///
/// The list is sorted primarily by value, secondarily by symbol name, with constants
/// appearing before addresses.
///
/// Call this after Xrefs are generated.
/// </summary>
private void GenerateActiveDefSymbolList() {
ActiveDefSymbolList.Clear();
foreach (Symbol sym in SymbolTable) {
if (!(sym is DefSymbol) || sym.IsVariable) {
continue;
}
DefSymbol defSym = sym as DefSymbol;
if (defSym.Xrefs.Count == 0) {
continue;
}
ActiveDefSymbolList.Add(defSym);
}
// Sort order:
// - constants appear before addresses
// - ascending numeric value, wider items first
// - ascending label
ActiveDefSymbolList.Sort(delegate (DefSymbol a, DefSymbol b) {
// Put constants first.
int ca = (a.IsConstant) ? 1 : 0;
int cb = (b.IsConstant) ? 1 : 0;
if (ca != cb) {
return cb - ca;
}
if (a.Value < b.Value) {
return -1;
} else if (a.Value > b.Value) {
return 1;
} else if (DefSymbol.IsWider(a, b)) {
return -1;
} else if (DefSymbol.IsWider(b, a)) {
return 1;
}
return Asm65.Label.LABEL_COMPARER.Compare(a.Label, b.Label);
});
}
#endregion Analysis
#region Change Management
/// <summary>
/// Generates a ChangeSet that merges the FormatDescriptors in the new list into
/// OperandFormats.
///
/// All existing descriptors that overlap with new descriptors will be removed.
/// In cases where old and new descriptors have the same starting offset, this
/// will be handled with a single change object.
///
/// If old and new descriptors are identical, no change object will be generated.
/// It's possible for this to return an empty change set.
/// </summary>
/// <param name="newList">List of new format descriptors.</param>
/// <returns>Change set.</returns>
public ChangeSet GenerateFormatMergeSet(SortedList<int, FormatDescriptor> newList) {
Debug.WriteLine("Generating format merge set...");
ChangeSet cs = new ChangeSet(newList.Count * 2);
// The Keys and Values properties are documented to return the internal data
// structure, not make a copy, so this will be fast.
IList<int> mainKeys = OperandFormats.Keys;
IList<FormatDescriptor> mainValues = OperandFormats.Values;
IList<int> newKeys = newList.Keys;
IList<FormatDescriptor> newValues = newList.Values;
// The basic idea is to walk through the new list, checking each entry for
// conflicts with the main list. If there's no conflict, we create a change
// object for the new item. If there is a conflict, we resolve it appropriately.
//
// The check on the main list is very fast because both lists are in sorted
// order, so we can just walk the main list forward. If a main-list entry
// conflicts, we create a removal object, and advance the main index.
int mainIndex = 0;
int newIndex = 0;
while (newIndex < newKeys.Count) {
int newOffset = newKeys[newIndex];
int newLength = newValues[newIndex].Length;
if (mainIndex >= mainKeys.Count) {
// We've run off the end of the main list. Just add the new item.
UndoableChange uc = UndoableChange.CreateActualOperandFormatChange(
newOffset, null, newValues[newIndex]);
cs.AddNonNull(uc);
newIndex++;
continue;
}
// Check for overlap by computing the intersection. Start and end form two
// points; the intersection is the largest of the start points and the
// smallest of the end points. If the result of the computation puts end before
// start, there's no overlap.
int mainOffset = mainKeys[mainIndex];
int mainLength = mainValues[mainIndex].Length;
Debug.Assert(newLength > 0 && mainLength > 0);
int interStart = Math.Max(mainOffset, newOffset);
int interEnd = Math.Min(mainOffset + mainLength, newOffset + newLength);
// exclusive end point, so interEnd == interStart means no overlap
if (interEnd > interStart) {
Debug.WriteLine("Found overlap: main(+" + mainOffset.ToString("x6") +
"," + mainLength + ") : new(+" + newOffset.ToString("x6") +
"," + newLength + ")");
// See if the initial offsets are identical. If so, put the add and
// remove into a single change. This isn't strictly necessary, but it's
// slightly more efficient.
if (mainOffset == newOffset) {
// Check to see if the descriptors are identical. If so, ignore this.
if (mainValues[mainIndex] == newValues[newIndex]) {
Debug.WriteLine(" --> no-op change " + newValues[newIndex]);
} else {
Debug.WriteLine(" --> replace change " + newValues[newIndex]);
UndoableChange uc = UndoableChange.CreateActualOperandFormatChange(
newOffset, mainValues[mainIndex], newValues[newIndex]);
cs.AddNonNull(uc);
}
} else {
// Remove the old entry, add the new entry.
Debug.WriteLine(" --> remove/add change " + newValues[newIndex]);
UndoableChange ruc = UndoableChange.CreateActualOperandFormatChange(
mainOffset, mainValues[mainIndex], null);
UndoableChange auc = UndoableChange.CreateActualOperandFormatChange(
newOffset, null, newValues[newIndex]);
cs.AddNonNull(ruc);
cs.AddNonNull(auc);
}
newIndex++;
// Remove all other main-list entries that overlap with this one.
while (++mainIndex < mainKeys.Count) {
mainOffset = mainKeys[mainIndex];
mainLength = mainValues[mainIndex].Length;
interStart = Math.Max(mainOffset, newOffset);
interEnd = Math.Min(mainOffset + mainLength, newOffset + newLength);
// exclusive end point, so interEnd == interStart means no overlap
if (interEnd <= interStart) {
break;
}
Debug.WriteLine(" also remove +" + mainOffset.ToString("x6") +
mainValues[mainIndex]);
UndoableChange uc = UndoableChange.CreateActualOperandFormatChange(
mainOffset, mainValues[mainIndex], null);
cs.AddNonNull(uc);
}
} else {
// No overlap. If the main entry is earlier, we can cross it off the list
// and advance to the next one. Otherwise, we add the change and advance
// that list.
if (mainOffset < newOffset) {
mainIndex++;
} else {
Debug.WriteLine("Add non-overlap " + newOffset.ToString("x6") +
newValues[newIndex]);
UndoableChange uc = UndoableChange.CreateActualOperandFormatChange(
newOffset, null, newValues[newIndex]);
cs.AddNonNull(uc);
newIndex++;
}
}
}
// Trim away excess capacity, since this will probably be sitting in an undo
// list for a long time.
cs.TrimExcess();
Debug.WriteLine("Total " + cs.Count + " changes");
return cs;
}
/// <summary>
/// Returns the analyzer attributes for the specified byte offset.
///
/// Bear in mind that Anattrib is a struct, and thus the return value is a copy.
/// </summary>
public Anattrib GetAnattrib(int offset) {
return mAnattribs[offset];
}
/// <summary>
/// Returns true if the offset has a long comment, note, or visualization. Used for
/// determining how to split up a data area.
/// Currently not returning true for an end-of-line comment.
/// </summary>
/// <param name="offset">Offset of interest.</param>
/// <returns>True if a comment, note, or visualization was found.</returns>
public bool HasCommentNoteOrVis(int offset) {
return (LongComments.ContainsKey(offset) ||
Notes.ContainsKey(offset) ||
VisualizationSets.ContainsKey(offset));
}
/// <summary>
/// True if an "undo" operation is available.
/// </summary>
public bool CanUndo { get { return mUndoTop > 0; } }
/// <summary>
/// True if a "redo" operation is available.
/// </summary>
public bool CanRedo { get { return mUndoTop < mUndoList.Count; } }
/// <summary>
/// True if something has changed since the last time the file was saved.
/// </summary>
public bool IsDirty { get { return mUndoTop != mUndoSaveIndex; } }
/// <summary>
/// Sets the save index equal to the undo position. Do this after the file has
/// been successfully saved.
/// </summary>
public void ResetDirtyFlag() {
mUndoSaveIndex = mUndoTop;
}
/// <summary>
/// Returns the next undo operation, and moves the pointer to the previous item.
/// </summary>
public ChangeSet PopUndoSet() {
if (!CanUndo) {
throw new Exception("Can't undo");
}
Debug.WriteLine("PopUndoSet: returning entry " + (mUndoTop - 1) + ": " +
mUndoList[mUndoTop - 1]);
return mUndoList[--mUndoTop];
}
/// <summary>
/// Returns the next redo operation, and moves the pointer to the next item.
/// </summary>
/// <returns></returns>
public ChangeSet PopRedoSet() {
if (!CanRedo) {
throw new Exception("Can't redo");
}
Debug.WriteLine("PopRedoSet: returning entry " + mUndoTop + ": " +
mUndoList[mUndoTop]);
return mUndoList[mUndoTop++];
}
/// <summary>
/// Adds a change set to the undo list. All redo operations above it on the
/// stack are removed.
///
/// We currently allow empty sets.
/// </summary>
/// <param name="changeSet">Set to push.</param>
public void PushChangeSet(ChangeSet changeSet) {
if (IsReadOnly) {
return;
}
Debug.WriteLine("PushChangeSet: adding " + changeSet);
// Remove all of the "redo" entries from the current position to the end.
if (mUndoTop < mUndoList.Count) {
Debug.WriteLine("PushChangeSet: removing " + (mUndoList.Count - mUndoTop) +
" entries");
mUndoList.RemoveRange(mUndoTop, mUndoList.Count - mUndoTop);
}
mUndoList.Add(changeSet);
mUndoTop = mUndoList.Count;
// If the user makes a change, saves the file, hits undo, then makes another change,
// the "undo top" and "save index" will be equal, which will make us think the
// file doesn't need to be saved. In reality there is no longer any undo index that
// matches the saved file state.
if (mUndoSaveIndex >= mUndoTop) {
mUndoSaveIndex = -1;
}
}
/// <summary>
/// Returns the change at the top of the list, i.e. the one that would be popped off
/// if we hit "undo".
/// </summary>
/// <returns>The change set. The caller must not modify it.</returns>
public ChangeSet GetTopChange() {
Debug.Assert(mUndoList.Count > 0);
Debug.Assert(mUndoTop > 0);
return mUndoList[mUndoTop - 1];
}
/// <summary>
/// Generate undo/redo history, for the debug window.
/// </summary>
public string DebugGetUndoRedoHistory() {
StringBuilder sb = new StringBuilder();
sb.Append("Bracketed change will be overwritten by next action\r\n\r\n");
for (int i = 0; i < mUndoList.Count; i++) {
ChangeSet cs = mUndoList[i];
char lbr, rbr;
if (i == mUndoTop) {
lbr = '[';
rbr = ']';
} else {
lbr = rbr = ' ';
}
sb.AppendFormat("{0}{3,3:D}{1}{2}: {4} change{5}\r\n",
lbr, rbr, i == mUndoSaveIndex ? "*" : " ",
i, cs.Count, cs.Count == 1 ? "" : "s");
for (int j = 0; j < cs.Count; j++) {
UndoableChange uc = cs[j];
sb.AppendFormat(" type={0} offset=+{1} reReq={2}\r\n",
uc.Type, uc.HasOffset ? uc.Offset.ToString("x6") : "N/A",
uc.ReanalysisRequired);
}
}
if (mUndoTop == mUndoList.Count) {
sb.AppendFormat("[ - ]{0}\r\n", mUndoTop == mUndoSaveIndex ? "*" : " ");
}
return sb.ToString();
}
/// <summary>
/// Applies the changes to the project, and updates the display.
/// </summary>
/// <param name="cs">Set of changes to apply.</param>
/// <param name="backward">If set, undo the changes instead.</param>
/// <param name="affectedOffsets">List of offsets affected by change. Only meaningful
/// when the result is not "None".</param>
/// <returns>An indication of the level of reanalysis required. If this returns None,
/// the list of offsets to update will be in affectedOffsets.</returns>
public UndoableChange.ReanalysisScope ApplyChanges(ChangeSet cs, bool backward,
out RangeSet affectedOffsets) {
affectedOffsets = new RangeSet();
if (IsReadOnly) {
return UndoableChange.ReanalysisScope.None;
}
UndoableChange.ReanalysisScope needReanalysis = UndoableChange.ReanalysisScope.None;
// TODO(maybe): if changes overlap, we need to apply them in reverse order when
// "backward" is set. This requires a reverse-order enumerator from
// ChangeSet. Not currently needed.
foreach (UndoableChange uc in cs) {
object oldValue, newValue;
// Unpack change, flipping old/new for undo.
if (!backward) {
oldValue = uc.OldValue;
newValue = uc.NewValue;
} else {
oldValue = uc.NewValue;
newValue = uc.OldValue;
}
int offset = uc.Offset;
switch (uc.Type) {
case UndoableChange.ChangeType.Dummy:
//if (uc.ReanalysisRequired == UndoableChange.ReanalysisFlags.None) {
// affectedOffsets.AddRange(0, FileData.Length - 1);
//}
break;
case UndoableChange.ChangeType.SetAddress: {
AddressMap addrMap = AddrMap;
if (addrMap.Get(offset) != (int)oldValue) {
Debug.WriteLine("GLITCH: old address value mismatch (" +
addrMap.Get(offset) + " vs " + (int)oldValue + ")");
Debug.Assert(false);
}
addrMap.Set(offset, (int)newValue);
Debug.WriteLine("Map offset +" + offset.ToString("x6") + " to $" +
((int)newValue).ToString("x6"));
// Visualization generators in extension scripts could be chasing
// addresses. Give them a chance to update.
ClearVisualizationCache();
// ignore affectedOffsets
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.CodeAndData);
}
break;
case UndoableChange.ChangeType.SetDataBank: {
// If there's no entry, treat it as an entry with value = Unknown.
DbrOverrides.TryGetValue(offset, out CodeAnalysis.DbrValue current);
if (current != (CodeAnalysis.DbrValue)oldValue) {
Debug.WriteLine("GLITCH: old DBR value mismatch (" +
current + " vs " + oldValue + ")");
Debug.Assert(false);
}
if (newValue == null) {
DbrOverrides.Remove(offset);
} else {
DbrOverrides[offset] = (CodeAnalysis.DbrValue)newValue;
}
// ignore affectedOffsets
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.CodeAndData);
}
break;
case UndoableChange.ChangeType.SetTypeHint: {
// Always requires full code+data re-analysis.
ApplyTypeHints((TypedRangeSet)oldValue, (TypedRangeSet)newValue);
// ignore affectedOffsets
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.CodeAndData);
}
break;
case UndoableChange.ChangeType.SetStatusFlagOverride: {
if (StatusFlagOverrides[offset] != (StatusFlags)oldValue) {
Debug.WriteLine("GLITCH: old status flag mismatch (" +
StatusFlagOverrides[offset] + " vs " +
(StatusFlags)oldValue + ")");
Debug.Assert(false);
}
StatusFlagOverrides[offset] = (StatusFlags)newValue;
// ignore affectedOffsets
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.CodeAndData);
}
break;
case UndoableChange.ChangeType.SetLabel: {
// NOTE: this is about managing changes to UserLabels. Adding
// or removing a user-defined label requires a full reanalysis,
// even if there was already an auto-generated label present,
// so we don't need to undo/redo Anattribs for anything except
// for renaming a user-defined label.
UserLabels.TryGetValue(offset, out Symbol oldSym);
if (oldSym != (Symbol) oldValue) {
Debug.WriteLine("GLITCH: old label value mismatch ('" +
oldSym + "' vs '" + oldValue + "')");
Debug.Assert(false);
}
if (newValue == null) {
// We're removing a user label.
UserLabels.Remove(offset);
SymbolTable.Remove((Symbol)oldValue); // unnecessary? will regen
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.DataOnly);
} else {
// We're adding or renaming a user label.
//
// We should not be changing a label to the same value as an
// existing label -- the dialog should have prevented it.
// This is important because, if we edit a label to match an
// auto-generated label, we'll have a duplicate label unless we
// do a full code+data reanalysis. If we're okay with reanalyzing
// on user-label renames, we can allow such conflicts.
//
// We might be changing it to match an existing platform symbol
// though. (Ex: create label FOO, add .sym65 with symbol FOO,
// edit FOO to BAR, then hit undo.)
if (oldValue != null) {
SymbolTable.Remove((Symbol)oldValue);
}
UserLabels[offset] = (Symbol)newValue;
SymbolTable[((Symbol)newValue).Label] = (Symbol)newValue;
//SymbolTable.Add((Symbol)newValue);
Debug.Assert(oldSym != null || uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.DataOnly);
}
if (uc.ReanalysisRequired == UndoableChange.ReanalysisScope.None) {
// Shouldn't really be "changing" from null to null, but
// it's legal, so don't blow up if it happens.
// (The assert on SymbolSource is older -- we now only care about
// what's in UserLabels, which are always Source=User.)
Debug.Assert((oldValue == null && newValue == null) ||
(((Symbol)oldValue).SymbolSource == Symbol.Source.User &&
((Symbol)newValue).SymbolSource == Symbol.Source.User));
// Not doing a full refresh, so keep this up to date.
mAnattribs[offset].Symbol = (Symbol)newValue;
if (oldValue != null) {
// Update everything in Anattribs and OperandFormats that
// referenced the old symbol.
RefactorLabel(offset, ((Symbol)oldValue).Label,
out bool foundExisting);
// If we fixed one or more broken references, we need to do
// a deeper re-analysis.
if (foundExisting) {
Debug.WriteLine("Found existing broken ref to '" +
((Symbol)newValue).Label + "'");
needReanalysis = UndoableChange.ReanalysisScope.DataOnly;
}
}
// Compute the affected offsets. We have one special case to
// consider: if we renamed a label, and the old or new name is
// in project or platform symbols, we need to restore that
// symbol to the symbol table. The most reliable way to do that
// is to switch us to a data re-analysis.
//
// The UI doesn't let you directly edit a label to overwrite a
// symbol, but see FOO/BAR example above.
if (IsInProjectOrPlatformList((Symbol)oldValue) ||
IsInProjectOrPlatformList((Symbol)newValue)) {
Debug.WriteLine("Label change masked/unmasked " +
"project/platform symbol");
needReanalysis = UndoableChange.ReanalysisScope.DataOnly;
} else {
affectedOffsets.Add(offset);
// Use the cross-reference table to identify the offsets that
// we need to update.
if (mXrefs.TryGetValue(offset, out XrefSet xrefs)) {
foreach (XrefSet.Xref xr in xrefs) {
// This isn't quite right -- in theory we should be
// adding all offsets that are part of the instruction,
// so that affectedOffsets can hold a contiguous range
// instead of a collection of opcode offsets. In
// practice, for a label change, it shouldn't matter.
affectedOffsets.Add(xr.Offset);
}
}
}
} else {
// We're not calling RefactorLabel() here because we should
// only be doing the reanalysis if we're adding or removing
// the label, not renaming it. If that changes, we'll need
// to do the refactor here, though we can skip Anattribs work.
Debug.Assert(oldValue == null || newValue == null);
}
// For add/edit/remove, we need to see if what we do will impact
// the behavior of a plugin. We don't need to do this on
// project/platform symbol changes because project property changes
// always update code and data.
if (mScriptManager.IsLabelSignificant((Symbol)oldValue,
(Symbol)newValue)) {
Debug.WriteLine("Plugin claims symbol is significant");
needReanalysis = UndoableChange.ReanalysisScope.CodeAndData;
}
}
break;
case UndoableChange.ChangeType.SetOperandFormat: {
// Note this is used for data/inline-data as well as instructions.
OperandFormats.TryGetValue(offset, out FormatDescriptor current);
if (current != (FormatDescriptor)oldValue) {
Debug.WriteLine("GLITCH: old operand format mismatch (" +
current + " vs " + oldValue + ")");
Debug.Assert(false);
}
if (newValue == null) {
OperandFormats.Remove(offset);
mAnattribs[offset].DataDescriptor = null;
} else {
OperandFormats[offset] = mAnattribs[offset].DataDescriptor =
(FormatDescriptor)newValue;
}
if (uc.ReanalysisRequired == UndoableChange.ReanalysisScope.None) {
// Add every offset in the range. The length might be changing
// (e.g. an offset with a single byte is now the start of a
// 10-byte string), so touch everything that was affected by
// the old descriptor or is affected by the new descriptor.
// [This may no longer be necessary -- size changes now
// require reanalysis.]
int afctLen = 1;
if (oldValue != null) {
afctLen =
Math.Max(afctLen, ((FormatDescriptor)oldValue).Length);
}
if (newValue != null) {
afctLen =
Math.Max(afctLen, ((FormatDescriptor)newValue).Length);
}
for (int i = offset; i < offset + afctLen; i++) {
affectedOffsets.Add(i);
}
}
}
break;
case UndoableChange.ChangeType.SetComment: {
if (!Comments[offset].Equals(oldValue)) {
Debug.WriteLine("GLITCH: old comment value mismatch ('" +
Comments[offset] + "' vs '" + oldValue + "')");
Debug.Assert(false);
}
Comments[offset] = (string)newValue;
// Only affects this offset.
affectedOffsets.Add(offset);
}
break;
case UndoableChange.ChangeType.SetLongComment: {
LongComments.TryGetValue(offset, out MultiLineComment current);
if (current != (MultiLineComment)oldValue) {
Debug.WriteLine("GLITCH: old long comment value mismatch ('" +
current + "' vs '" + oldValue + "')");
Debug.Assert(false);
}
if (newValue == null) {
LongComments.Remove(offset);
} else {
LongComments[offset] = (MultiLineComment)newValue;
}
// Only affects this offset.
affectedOffsets.Add(offset);
}
break;
case UndoableChange.ChangeType.SetNote: {
Notes.TryGetValue(offset, out MultiLineComment current);
if (current != (MultiLineComment)oldValue) {
Debug.WriteLine("GLITCH: old note value mismatch ('" +
current + "' vs '" + oldValue + "')");
Debug.Assert(false);
}
if (newValue == null) {
Notes.Remove(offset);
} else {
Notes[offset] = (MultiLineComment)newValue;
}
// Only affects this offset.
affectedOffsets.Add(offset);
}
break;
case UndoableChange.ChangeType.SetProjectProperties: {
bool needPlatformSymReload = !CommonUtil.Container.StringListEquals(
((ProjectProperties)oldValue).PlatformSymbolFileIdentifiers,
((ProjectProperties)newValue).PlatformSymbolFileIdentifiers,
null /*StringComparer.InvariantCulture*/);
bool needExtScriptReload = !CommonUtil.Container.StringListEquals(
((ProjectProperties)oldValue).ExtensionScriptFileIdentifiers,
((ProjectProperties)newValue).ExtensionScriptFileIdentifiers,
null);
// ProjectProperties are mutable, so create a new object that's
// a clone of the one that will live in the undo buffer.
ProjectProps = new ProjectProperties((ProjectProperties)newValue);
// Most of the properties are simply used during the reanalysis
// process. This must be set explicitly. NOTE: replacing this
// could cause cached data (such as Formatter strings) to be
// discarded, so ideally we wouldn't do this unless we know the
// CPU definition has changed (or we know that GetBestMatch is
// memoizing results and will return the same object).
Debug.WriteLine("Replacing CPU def object");
UpdateCpuDef();
if (needPlatformSymReload || needExtScriptReload) {
string errMsgs = LoadExternalFiles();
// TODO(someday): if the plugin failed to compile, we will have
// one or more error messages, which we are currently discarding
// because we can't create UI here. We could either have a
// general "change msgs" parameter that gets passed around, or
// be lazy and just drop them in a "messages from last update"
// box.
}
if (needExtScriptReload) {
ClearVisualizationCache();
}
}
// ignore affectedOffsets
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.CodeAndData);
break;
case UndoableChange.ChangeType.SetLocalVariableTable: {
LvTables.TryGetValue(offset, out LocalVariableTable current);
if (current != (LocalVariableTable)oldValue) {
Debug.WriteLine("GLITCH: old lvt value mismatch: current=" +
current + " old=" + (LocalVariableTable)oldValue);
Debug.Assert(false);
}
if (newValue == null) {
LvTables.Remove(offset);
} else {
LvTables[offset] = (LocalVariableTable)newValue;
}
// ignore affectedOffsets
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.DataOnly);
}
break;
case UndoableChange.ChangeType.SetVisualizationSet: {
VisualizationSets.TryGetValue(offset, out VisualizationSet current);
if (current != (VisualizationSet)oldValue) {
Debug.WriteLine("GLITCH: old visSet value mismatch: current=" +
current + " old=" + (VisualizationSet)oldValue);
Debug.Assert(false);
}
if (newValue == null) {
VisualizationSets.Remove(offset);
} else {
VisualizationSets[offset] = (VisualizationSet)newValue;
}
Debug.Assert(uc.ReanalysisRequired ==
UndoableChange.ReanalysisScope.DisplayOnly);
}
break;
default:
break;
}
if (needReanalysis < uc.ReanalysisRequired) {
needReanalysis = uc.ReanalysisRequired;
}
}
return needReanalysis;
}
/// <summary>
/// Clears all cached visualization images.
/// </summary>
public void ClearVisualizationCache() {
foreach (KeyValuePair<int, VisualizationSet> kvp in VisualizationSets) {
kvp.Value.RefreshNeeded();
}
}
/// <summary>
/// Updates all symbolic references to the old label. Call this after replacing
/// mAnattribs[labelOffset].Symbol.
/// </summary>
/// <param name="labelOffset">Offset with the just-renamed label.</param>
/// <param name="oldLabel">Previous value.</param>
/// <param name="foundExisting">Set to true if we found an existing (broken) reference
/// to the new label.</param>
private void RefactorLabel(int labelOffset, string oldLabel, out bool foundExisting) {
foundExisting = false;
if (!mXrefs.TryGetValue(labelOffset, out XrefSet xrefs)) {
// This can happen if you add a label in a file section that nothing references,
// and then rename it.
Debug.WriteLine("RefactorLabel: no references to " + oldLabel);
return;
}
string newLabel = mAnattribs[labelOffset].Symbol.Label;
//
// Update format descriptors in Anattribs.
//
foreach (XrefSet.Xref xr in xrefs) {
FormatDescriptor dfd = mAnattribs[xr.Offset].DataDescriptor;
if (dfd == null) {
// Should be a data target reference here? Where'd the xref come from?
Debug.Assert(false);
continue;
}
if (!dfd.HasSymbol) {
// The auto-gen stuff would have created a symbol, but the user can
// override that and display as e.g. hex.
continue;
}
if (Label.LABEL_COMPARER.Equals(newLabel, dfd.SymbolRef.Label)) {
// We found an existing, previously-broken reference to the new label.
// Let the caller know.
foundExisting = true;
}
if (!Label.LABEL_COMPARER.Equals(oldLabel, dfd.SymbolRef.Label)) {
// This can happen if the xref is based on the operand offset,
// but the user picked a different symbol. The xref generator
// creates entries for both target offsets, but only one will
// have a matching label.
continue;
}
mAnattribs[xr.Offset].DataDescriptor = FormatDescriptor.Create(
dfd.Length, new WeakSymbolRef(newLabel, dfd.SymbolRef.ValuePart),
dfd.FormatType == FormatDescriptor.Type.NumericBE);
}
//
// Update value in OperandFormats.
//
foreach (XrefSet.Xref xr in xrefs) {
if (!OperandFormats.TryGetValue(xr.Offset, out FormatDescriptor dfd)) {
// Probably an auto-generated symbol ref, so no entry in OperandFormats.
continue;
}
if (!dfd.HasSymbol) {
continue;
}
if (!Label.LABEL_COMPARER.Equals(oldLabel, dfd.SymbolRef.Label)) {
continue;
}
Debug.WriteLine("Replacing OpFor symbol at +" + xr.Offset.ToString("x6") +
" with " + newLabel);
OperandFormats[xr.Offset] = FormatDescriptor.Create(
dfd.Length, new WeakSymbolRef(newLabel, dfd.SymbolRef.ValuePart),
dfd.FormatType == FormatDescriptor.Type.NumericBE);
}
}
/// <summary>
/// Applies the values in the set to the project hints.
/// </summary>
/// <param name="oldSet">Previous values; must match current contents.</param>
/// <param name="newSet">Values to apply.</param>
private void ApplyTypeHints(TypedRangeSet oldSet, TypedRangeSet newSet) {
CodeAnalysis.TypeHint[] hints = TypeHints;
foreach (TypedRangeSet.Tuple tuple in newSet) {
CodeAnalysis.TypeHint curType = hints[tuple.Value];
if (!oldSet.GetType(tuple.Value, out int oldType) || oldType != (int)curType) {
Debug.WriteLine("Type mismatch at " + tuple.Value);
Debug.Assert(false);
}
//Debug.WriteLine("Set +" + tuple.Value.ToString("x6") + " to " +
// (CodeAnalysis.TypeHint)tuple.Type + " (was " +
// curType + ")");
hints[tuple.Value] = (CodeAnalysis.TypeHint)tuple.Type;
}
}
#endregion Change Management
/// <summary>
/// Finds a label by name. SymbolTable must be populated.
/// </summary>
/// <param name="name">Label to find.</param>
/// <returns>File offset associated with label, or -1 if not found.</returns>
public int FindLabelOffsetByName(string name) {
// We're interested in user labels and auto-generated labels. Do a lookup in
// SymbolTable to find the symbol, then if it's user or auto, we do a second
// search to find the file offset it's associated with. The second search
// requires a linear walk through anattribs; if we do this often we'll want to
// maintain a symbol-to-offset structure.
//
// This will not find "hidden" labels, i.e. labels that are in the middle of an
// instruction or multi-byte data area, because those are removed from SymbolTable.
if (!SymbolTable.TryGetValue(name, out Symbol sym)) {
return -1;
}
if (!sym.IsInternalLabel) {
return -1;
}
for (int i = 0; i < mAnattribs.Length; i++) {
if (mAnattribs[i].Symbol == sym) {
return i;
}
}
Debug.WriteLine("NOTE: symbol '" + name + "' exists, but wasn't found in labels");
return -1;
}
/// <summary>
/// Finds a user label by name, searching only non-unique local address labels.
/// </summary>
/// <param name="label">Label to search for. Must not have the uniquifier tag (if
/// it had one, you wouldn't be here).</param>
/// <param name="targetOffset">If multiple labels are found, we want the one that is
/// closest to this offset.</param>
/// <returns>The symbol found, or null if no match.</returns>
public Symbol FindBestNonUniqueLabel(string label, int targetOffset) {
Symbol bestSym = null;
int bestDelta = int.MaxValue;
// Simple linear search. Right now we're only doing this in a few specific
// UI-driven situations (edit operand, goto label), so performance isn't crucial.
foreach (KeyValuePair<int, Symbol> kvp in UserLabels) {
Symbol sym = kvp.Value;
if (sym.SymbolType != Symbol.Type.NonUniqueLocalAddr) {
continue;
}
if (sym.LabelWithoutTag == label) {
// found a match; is it the best one?
int delta = Math.Abs(kvp.Key - targetOffset);
if (delta < bestDelta) {
//Debug.WriteLine("FindBest: " + sym.Label + "/" + delta + " better than " +
// (bestSym != null ? bestSym.Label : "-") + "/" + bestDelta);
bestSym = sym;
bestDelta = delta;
} else {
//Debug.WriteLine("FindBest: " + sym.Label + "/" + delta + " not better than " +
// (bestSym != null ? bestSym.Label : "-") + "/" + bestDelta);
}
}
}
return bestSym;
}
// Punch-through functions; trying to avoid exposing ScriptManager for now.
public Dictionary<string, PluginCommon.IPlugin> GetActivePlugins() {
return mScriptManager.GetActivePlugins();
}
public PluginCommon.IPlugin GetPlugin(string scriptIdent) {
return mScriptManager.GetInstance(scriptIdent);
}
public void PrepareScripts(PluginCommon.IApplication appRef) {
mScriptManager.PrepareScripts(appRef);
}
public void UnprepareScripts() {
mScriptManager.UnprepareScripts();
}
public void DebugRebootSandbox() {
mScriptManager.RebootSandbox();
}
/// <summary>
/// For debugging purposes, get some information about the currently loaded
/// extension scripts.
/// </summary>
public string DebugGetLoadedScriptInfo() {
return mScriptManager.DebugGetLoadedScriptInfo();
}
}
}
Reference in New Issue View Git Blame Copy Permalink