mirror of
https://github.com/fadden/6502bench.git
synced 2024-12-01 07:50:37 +00:00
a902f69aea
The ZipChip GS register definitions can take advantage of the new I/O direction feature. Pulling them out into a .sym65 makes sense.
88 lines
3.6 KiB
Plaintext
88 lines
3.6 KiB
Plaintext
; Copyright 2018 faddenSoft. All Rights Reserved.
|
|
; See the LICENSE.txt file for distribution terms (Apache 2.0).
|
|
|
|
*SYNOPSIS ZipChip GS register definitions
|
|
|
|
;
|
|
; I got this from David Empson, who got it from Zip Technologies.
|
|
;
|
|
|
|
; ZipChip GS Special Registers Ex ZIP Technology, 12 October 1990
|
|
;
|
|
; Registers must be unlocked before they can be accessed (see $C05A).
|
|
; Locking them will re-enable the annunciators.
|
|
;
|
|
; Writing to any I/O location $C058-$C05F (whether registers are locked or
|
|
; unlocked) will reset delay in progress.
|
|
;
|
|
; $C058 R No operation
|
|
;
|
|
; $C058 W Write any value to force poweron/reset bit to COLD (forces next
|
|
; reset to restore ZIP registers to defaults/switch settings).
|
|
;
|
|
; $C059 R/W 76543210
|
|
; *....... Bank Switch Language Card cache disable=1/enable=0?
|
|
; .*...... Paddle delay (5 ms) disable=0/enable=1 $C070/$C020
|
|
; ..*..... External delay (5 ms) disable=0/enable=1
|
|
; ...*.... Counter delay (5 ms) disable=0/enable=1 $C02E/$C07E
|
|
; ....*... CPS follow disable=0/enable=1
|
|
; .....*.. Last Reset warm? READ ONLY
|
|
; ......*. Hardware DMA READ ONLY
|
|
; .......* non-GS (0)/GS (1) READ ONLY
|
|
;
|
|
; $C05A R 76543210
|
|
; ****.... Current ZIP Speed, 0=100%, F=6.25%, in 6.25% increments
|
|
; ....1111
|
|
;
|
|
; $C05A W Write values as follows:
|
|
; $5x Unlock ZIP registers (must write 4 times)
|
|
; $Ax Lock ZIP registers
|
|
; other Force ZIP to follow system clock (i.e. disable card)
|
|
;
|
|
; $C05B R 76543210
|
|
; *....... 1msclk - clock with 1 ms period
|
|
; .*...... cshupd - Tag data at $C05F updated (read $C05F to reset)
|
|
; ..*..... Bank Switch Language Card cache (0), don't (1)
|
|
; ...*.... Board disable - 0=enabled, 1=disabled
|
|
; ....*... delay in effect (0=ZIP, 1=Slow)
|
|
; .....*.. rombank (0/1) - not in development version
|
|
; ......** Cache RAM size (00=8k, 01=16k, 10=32k, 11=64k)
|
|
;
|
|
; $C05B W Write any value to force ZIP to current speed (i.e. enable card)
|
|
;
|
|
; $C05C R/W 76543210
|
|
; *******. Slot 7-1 delay enable (all slots 52-54 ms)
|
|
; .......* Speaker delay enable (5 ms)
|
|
;
|
|
; $C05D R Current 65816 bank
|
|
;
|
|
; $C05D W 76543210
|
|
; ****.... Set ZIP speed, 0=100%, F=6.25%, in 6.25% increments
|
|
; ....**** Don't care
|
|
;
|
|
; $C05E R Read last Tag data written and force the next write to
|
|
; create a trash tag value.
|
|
;
|
|
; $C05E W No operation
|
|
;
|
|
; $C05F R Read last Tag data written and reset cshupd. Note: apparently
|
|
; any write to a ZIP register (unlocked) will clear cshupd, but cshupd says
|
|
; that this location must be read.
|
|
;
|
|
; $C05F W No operation
|
|
|
|
ZIP_Reset > $c058 ;W write any value to force poweron/reset bit to COLD
|
|
ZIP_Options @ $c059 ;RW bit flags: paddle delay, CPS follow, etc.
|
|
ZIP_Speed < $c05a ;R current ZIP speed in 6.25% increments
|
|
ZIP_Lock > $c05a ;W $5* unlock (write 4x), $A* lock, other=disable
|
|
ZIP_Status < $c05b ;R bit flags: status values
|
|
ZIP_Enable > $c05b ;W write any value to enable card
|
|
ZIP_SlotEnable @ $c05c ;RW bit flags: enable delay on slots and speaker
|
|
ZIP_Bank < $c05d ;R current 65816 bank
|
|
ZIP_SetSpeed > $c05d ;W set ZIP speed in 6.25% increments
|
|
ZIP_Tag1 < $c05e ;R read last Tag written and force trash tag
|
|
ZIP_Nop1 > $c05e ;W no-op with side-effects
|
|
ZIP_Tag2 < $c05f ;R read last tag written and reset cshupd
|
|
ZIP_Nop2 > $c05f ;W no-op with side-effects
|
|
|